Search

Age-related macular degeneration (AMD) is a leading cause of vision loss in the elderly. The current standard treatment for AMD involves frequent intravitreal administrations of therapeutic agents. While effective, this approach presents challenges, including patient discomfort, inconvenience, and the risk of adverse complications. Nanoparticle-based intravitreal drug delivery platforms offer a promising solution to overcome these limitations. These platforms are engineered to target the retina specifically and control drug release, which enhances drug retention, improves drug concentration and bioavailability at the retinal site, and reduces the frequency of injections. This review aims to uncover the design principles guiding the development of highly effective nanoparticle-based intravitreal drug delivery platforms for AMD treatment. By gaining a deeper understanding of the physiology of ocular barriers and the physicochemical properties of nanoparticles, we establish a basis for designing intravitreal nanoparticles to optimize drug delivery and drug retention in the retina. Furthermore, we review recent nanoparticle-based intravitreal therapeutic strategies to highlight their potential in improving AMD treatment efficiency. Lastly, we address the challenges and opportunities in this field, providing insights into the future of nanoparticle-based drug delivery to improve therapeutic outcomes for AMD patients., Competing Interests: Declaration of competing interest The authors declare that they have no known conflict of interest or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

Smooth muscle cells, endothelial cells and macrophages display remarkable heterogeneity within the healthy vasculature and under pathological conditions. During development, these cells arise from numerous embryological origins, which confound with different microenvironments to generate postnatal vascular cell diversity. In the atherosclerotic plaque milieu, all these cell types exhibit astonishing plasticity, generating a variety of plaque burdening or plaque stabilizing phenotypes. And yet how developmental origin influences intraplaque cell plasticity remains largely unexplored despite evidence suggesting this may be the case. Uncovering the diversity and plasticity of vascular cells is being revolutionized by unbiased single cell whole transcriptome analysis techniques that will likely continue to pave the way for therapeutic research. Cellular plasticity is only just emerging as a target for future therapeutics, and uncovering how intraplaque plasticity differs across vascular beds may provide key insights into why different plaques behave differently and may confer different risks of subsequent cardiovascular events., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Purpose: Age-related macular degeneration (AMD) and polypoidal choroidal vasculopathy (PCV) are sister diseases and have several similar clinical features and still have few genetic differences. The association of HERPUD1 (homocysteine inducible ER protein with ubiquitin like domain 1) gene variant rs2217332 with PCV is known; however, such association with AMD has not been reported in the Indian population. We analyzed the association of rs2217332 with PCV and AMD to identify the preferential association of this variant with these diseases., Methods: This is a population-based case-control study consisting of 422 patients (129 AMD cases; 101 PCV cases, 192 healthy controls) recruited from the vitreoretinal clinic Sankara Nethralaya. The sample size for the study was calculated using appropriate power calculation methods. Genotype was determined using PCR-based Sanger sequencing. The SPSS V23.0 statistical package tool was used to calculate chi-square and ROC to determine the association of rs2217332 with control, AMD, and PCV., Results: Here, we report for the first time the association of this genetic variant (rs2217332) with AMD and PCV in the Indian population. The case-control study shows a significant association of this SNP with PCV (P value = 0.002); however, this variant is not significantly associated with AMD (P value = 0.602). Comparison between AMD (as control) and PCV (as case) also showed significant association of the SNP with PCV (P value = 0.02). Minor allele A conferred to increase the risk of PCV., Conclusions: The study concludes that the genetic variant rs2217332 in HERPUD1 gene is highly significantly associated with PCV and not with AMD in Indian populations., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Significant progress in nanotechnology has enormously contributed to the design and development of innovative products that have transformed societal challenges related to energy, information technology, the environment, and health. A large portion of the nanomaterials developed for such applications is currently highly dependent on energy-intensive manufacturing processes and non-renewable resources. In addition, there is a considerable lag between the rapid growth in the innovation/discovery of such unsustainable nanomaterials and their effects on the environment, human health, and climate in the long term. Therefore, there is an urgent need to design nanomaterials sustainably using renewable and natural resources with minimal impact on society. Integrating sustainability with nanotechnology can support the manufacturing of sustainable nanomaterials with optimized performance. This short review discusses challenges and a framework for designing high-performance sustainable nanomaterials. We briefly summarize the recent advances in producing sustainable nanomaterials from sustainable and natural resources and their use for various biomedical applications such as biosensing, bioimaging, drug delivery, and tissue engineering. Additionally, we provide future perspectives into the design guidelines for fabricating high-performance sustainable nanomaterials for medical applications.

Polymeric poly(vinyl alcohol) (PVA)-based composite hydrogels are promising materials with various biomedical applications. However, their mechanical and tribological properties should be tailored for such applications. In this study, we report the fabrication of PVA-gellan gum (GG) composite hydrogels and determine the effect of GG content on their rheological and tribological properties. The rheology tests revealed an enhanced storage (elastic) modulus with increased gellan gum (GG) concentration. The results showed up to 89% enhancement of the elastic modulus of PVA by adding 0.5 wt% gellan gum. This elastic modulus (12.1 ± 0.8 kPa) was very close to that of chondrocyte and its surrounding pericellular matrix (12 ± 1 kPa), rendering them ideal for cartilage regeneration applications. Furthermore, the friction coefficient was reduced by up to 80% by adding GG to PVA, demonstrating the increased elastic modulus improved chance of survival under mechanical shear stresses. Examining PVA/GG at different concentrations of 0.1, 0.3, and 0.5 wt% of GG, we demonstrate that at a load of 5 N, the friction coefficient decreases by increasing the GG concentration. However, at higher loads of 10 and 15 N, a 0.3 wt% concentration was sufficient to significantly reduce the friction coefficient. For PVA and PVA/GG composites, we observed a reduction in friction coefficient by increasing the load from 5 to 15 N. We also found the friction to be independent of the sliding velocity. Possible mechanisms of achieving a reduced friction coefficient are discussed.

Bioprinting is a promising fabrication technique aimed at developing biologically functional, tissue-like constructs for various biomedical applications. Among the different bioprinting approaches, vat polymerization-based techniques offer the highest feature resolution compared to more commonly used extrusion-based methods and therefore have greater potential to be utilized for printing complex hierarchical tissue architectures. Although significant efforts have been directed toward harnessing digital light processing techniques for high-resolution bioprinting, the use of stereolithography (SLA) setups for producing distinct hydrogel filaments smaller than 20 μm has received less attention. Improving the bioprinting resolution is still a technical challenge that must consider both the practical limitations of the bioprinter apparatus and the formulation of the cytocompatible bioresin. In this study, we developed a novel bioresin compatible with SLA and capable of printing high-resolution features. This resin, composed of a biosynthetic polypeptide poly(l-glutamic acid) functionalized with tyramine moieties (PLGA-Tyr), was crosslinked using a visible-light photoinitiator system. Varying concentrations of PLGA-Tyr and the co-photoinitiator were evaluated for the hydrogel system's gelation ability, swelling characteristics, degradation profiles, mechanical properties, and cell viability post-encapsulation. This study introduces a custom-built, cost-effective, visible-light SLA bioprinting system named the "MicroNC". Using the newly developed visible-light bioresin, we demonstrated for the first time the ability to fabricate hydrogel scaffolds with well-resolved filaments (less than 8 μm in width) capable of supporting cell viability and proliferation and directing cellular morphology at the single-cell level for up to 14 days. Overall, these experiments have underscored the exciting potential of using the visible-light-photoinitiated PLGA-Tyr material system for developing physiologically relevant in vitro hydrogel scaffolds with feature resolutions comparable to the dimensions of individual human cells for a wide range of biomedical applications.

Functional nanoporous materials are categorized as an important class of nanostructured materials because of their tunable porosity and pore geometry (size, shape, and distribution) and their unique chemical and physical properties as compared with other nanostructures and bulk counterparts. Progress in developing a broad spectrum of nanoporous materials has accelerated their use for extensive applications in catalysis, sensing, separation, and environmental, energy, and biomedical areas. The purpose of this review is to provide recent advances in synthesis strategies for designing ordered or hierarchical nanoporous materials of tunable porosity and complex architectures. Furthermore, we briefly highlight working principles, potential pitfalls, experimental challenges, and limitations associated with nanoporous material fabrication strategies. Finally, we give a forward look at how digitally controlled additive manufacturing may overcome existing obstacles to guide the design and development of next-generation nanoporous materials with predefined properties for industrial manufacturing and applications.

Mechanosensitive channels are integral membrane proteins that sense mechanical stimuli. Like most plasma membrane ion channel proteins they must pass through biosynthetic quality control in the endoplasmic reticulum that results in them reaching their destination at the plasma membrane. Here we show that N-linked glycosylation of two highly conserved asparagine residues in the 'cap' region of mechanosensitive Piezo1 channels are necessary for the mature protein to reach the plasma membrane. Both mutation of these asparagines (N2294Q/N2331Q) and treatment with an enzyme that hydrolyses N-linked oligosaccharides (PNGaseF) eliminates the fully glycosylated mature Piezo1 protein. The N-glycans in the cap are a pre-requisite for N-glycosylation in the 'propeller' regions, which are present in loops that are essential for mechanotransduction. Importantly, trafficking-defective Piezo1 variants linked to generalized lymphatic dysplasia and bicuspid aortic valve display reduced fully N-glycosylated Piezo1 protein. Thus the N-linked glycosylation status in vitro correlates with efficient membrane trafficking and will aid in determining the functional impact of Piezo1 variants of unknown significance., (© 2021. The Author(s).)

Among various magnetic nanoparticles, manganese oxide nanoparticles are considered as established T 1 magnetic resonance imaging (MRI) contrast agents for preclinical research. The implications of their degradation properties and use as therapeutic carriers in drug delivery systems have not been explored. In addition, how the chemical composition and size of manganese oxide nanoparticles, as well as the surrounding environment, influence their degradation and MRI contrast properties ( T 1 vs. T 2 ) have not been studied in great detail. A fundamental understanding of their characteristic properties, such as degradation, is highly desirable for developing simultaneous diagnosis and therapeutic solutions. Here, we demonstrate how the precursor type and reaction environment affect the size and chemical composition of manganese oxide nanoparticles and evaluate their influence on the nanoparticle degradability and release of the drug l-3,4-dihydroxyphenylalanine (l-dopa). The results show that the degradation rate (and the associated release of drug l-dopa molecules) of manganese oxide nanoparticles depends on their size, composition and the surrounding environment (aqueous or biometric fluid). The dependence of MRI relaxivities of manganese oxide nanoparticles on the size, chemical composition and nanoparticle degradation in water is also established. A preliminary cell viability study reveals the cytocompatible properties of l-dopa functionalized manganese oxide nanoparticles. Overall, this work provides new insights into smartly designed manganese oxide nanoparticles with multitasking capabilities to target bioimaging and therapeutic applications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Mural cells collectively refer to the smooth muscle cells and pericytes of the vasculature. This heterogenous population of cells play a crucial role in the regulation of blood pressure, distribution, and the structural integrity of the vascular wall. As such, dysfunction of mural cells can lead to the pathogenesis and progression of a number of diseases pertaining to the vascular system. Cardiovascular diseases, particularly atherosclerosis, are perhaps the most well-described mural cell-centric case. For instance, atherosclerotic plaques are most often described as being composed of a proliferative smooth muscle cap accompanied by a necrotic core. More recently, the role of dysfunctional mural cells in neurodegenerative diseases, such as Alzheimer's and Parkinson's disease, is being recognized. In this review, we begin with an exploration of the mechanisms underlying atherosclerosis and neurodegenerative diseases, such as mural cell plasticity. Next, we highlight a selection of signaling pathways (PDGF, Notch and inflammatory signaling) that are conserved across both diseases. We propose that conserved mural cell signaling mechanisms can be exploited for the identification or development of dual-pronged therapeutics that impart both cardio- and neuroprotective qualities.

Bone fractures and critical-sized bone defects present significant health threats for the elderly who have limited capacity for regeneration due to the presence of functionally compromised senescent cells. A wide range of synthetic materials has been developed to promote the regeneration of critical-sized bone defects, but it is largely unknown if a synthetic biomaterial (scaffold) can modulate cellular senescence and improve bone regeneration in aged scenarios. The current study investigates the interaction of Baghdadite (Ca 3 ZrSi 2 O 9 ) ceramic scaffolds with senescent human primary osteoblast-like cells (HOBs) and its bone regeneration capacity in aged rats. A senescent HOB model was established by repeatedly passaging HOBs till passage 7 (P7). Compared to the clinically used hydroxyapatite/tricalcium phosphate (HA/TCP), Baghdadite prevented senescence induction in P7 HOBs and markedly negated the paracrine effect of P7 HOB secretomes that mediated the up-regulations of cellular senescence-associated gene expression levels in P2 HOBs. We further demonstrated that conditioned media extracted from Baghdadite corrected the dysfunctional mitochondria in P7 HOBs. In vivo , the bone regeneration capacity was enhanced when 3D printed Baghdadite scaffolds were implanted in a calvaria critical-sized bone defect model in both young and aged rats compared to HA/TCP scaffolds, but a better effect was observed in aged rats than in young rats. This study suggests that Baghdadite ceramic represents a novel and promising biomaterial approach to promote bone regeneration capacity in the elderly by providing an anti-senescent microenvironment.

Pancreatic ductal adenocarcinoma (PDAC) is one of the most lethal solid malignancies in the world due to its insensitivity to current therapies and its propensity to metastases from the primary tumor mass. This is largely attributed to its complex microenvironment composed of unique stromal cell populations and extracellular matrix (ECM). The recruitment and activation of these cell populations cause an increase in deposition of ECM components, which highly influences the behavior of malignant cells through disrupted forms of signaling. As PDAC progresses from premalignant lesion to invasive carcinoma, this dynamic landscape shields the mass from immune defenses and cytotoxic intervention. This microenvironment influences an invasive cell phenotype through altered forms of mechanical signaling, capable of enacting biochemical changes within cells through activated mechanotransduction pathways. The effects of altered mechanical cues on malignant cell mechanotransduction have long remained enigmatic, particularly in PDAC, whose microenvironment significantly changes over time. A more complete and thorough understanding of PDAC's physical surroundings (microenvironment), mechanosensing proteins, and mechanical properties may help in identifying novel mechanisms that influence disease progression, and thus, provide new potential therapeutic targets., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Surface topography is one of the key factors in regulating interactions between materials and cells. While topographies presented to cells in vivo are non-symmetrical and in complex shapes, current fabrication techniques are limited to replicate these complex geometries. In this study, we developed a microcasting technique and successfully produced imprinted hydroxyapatite (HAp) surfaces with nature-inspired (honeycomb, pillars, and isolated islands) topographies. The in vitro biological performance of the developed non-symmetrical topographies was evaluated using adipose-derived stem cells (ADSCs). We demonstrated that ADSCs cultured on all HAp surfaces, except honeycomb patterns, presented well-defined stress fibers and expressed focal adhesion protein (paxillin) molecules. Isolated islands topographies significantly promoted osteogenic differentiation of ADSCs with increased alkaline phosphatase activity and upregulation of key osteogenic markers, compared to the other topographies and the control unmodified (flat) HAp surface. In contrast, honeycomb topographies hampered the ability of the ADSCs to proliferate and differentiate to the osteogenic lineage. This work presents a facile technique to imprint nature-derived topographies on the surface of bioceramics which opens up opportunities for the development of bioresponsive interfaces in tissue engineering and regenerative medicine., Competing Interests: Authors declare no conflict of interest., (© 2020 [The Author/The Authors].)

The translation of growth factors (GFs) into clinical applications is limited by their low stability in physiological environments. Controlled GF delivery through biomaterial vehicles provides protection from proteases, targeted delivery, and longer term release profiles. However, current methods used to incorporate GFs into biomaterials still present limitations. While direct adsorption and encapsulation result in burst release, covalent incorporation provides a tailorable release profile but generally requires more complicated processes and chemical modification of the GFs. Bioaffinity methods provide long-term release profiles but fail in their specificity, resulting in GF-dependent applicability and release profiles. In the present study, we introduce tyraminated poly-vinyl-alcohol (PVA-Tyr) as a GF-delivery vehicle that can covalently incorporate native GFs through a photo-initiated cross-linking process via formation of bi-phenol bonds. Mass loss and release studies revealed that protein-loaded PVA-Tyr hydrogels had highly tailorable degradation times from 7 to 92 days, during which the covalently incorporated proteins were released in a linear fashion. The incorporation of bovine serum albumin (BSA), vascular endothelial growth factor (VEGF), basic fibroblast growth factor (bFGF), or brain-derived growth factor (BDNF) resulted in similar incorporation efficiencies and release profiles, demonstrating the low specificity and versatility of the system. Furthermore, functional studies demonstrated that VEGF, bFGF and BDNF released from the PVA-Tyr hydrogels retained the ability to increase the metabolic activity, migration, and 3D vessel formation of endothelial cells and mesenchymal stem cells. Taken together, this demonstrates that PVA-Tyr shows high potential as a highly tailorable GF delivery tool for a range of different regenerative medicine applications.

Pancreatic ductal adenocarcinoma (PDAC) is one of the deadliest solid tumors in the world. Currently, there are no approved targeted therapies for PDAC. Mutations in Kirsten rat sarcoma viral oncogene homologue ( KRAS ) are known to be a major driver of PDAC progression, but it was considered an undruggable target until recently. Moreover, PDAC also suffers from drug delivery issues due to the highly fibrotic tumor microenvironment. In this perspective, we provide an overview of recent developments in targeting mutant KRAS and strategies to overcome drug delivery issues (e.g., nanoparticle delivery). Overall, we propose that the antitumor effects from novel KRAS inhibitors along with strategies to overcome drug delivery issues could be a new therapeutic way forward in PDAC.

Engineering synthetic scaffolds to repair and regenerate ruptured native tendon and ligament (T/L) tissues is a significant engineering challenge due to the need to satisfy both the unique biological and biomechanical properties of these tissues. Long-term clinical outcomes of synthetic scaffolds relying solely on high uniaxial tensile strength are poor with high rates of implant rupture and synovitis. Ideal biomaterials for T/L repair and regeneration need to possess the appropriate biological and biomechanical properties necessary for the successful repair and regeneration of ruptured tendon and ligament tissues., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Carbon dots (CDs)-based nanoparticles have been extensively explored for biological applications in sensing and bioimaging. However, the major translational barriers to CDs for imaging and sensing applications include synthetic strategies to obtain monodisperse CDs with tunable structural, electronic, and optical properties in order to achieve high-resolution deep-tissue imaging, intracellular detection, and sensing of metal ions with high sensitivity down to nanomolar levels. Herein, we report a novel strategy to synthesize and develop a multifunctional nitrogen-doped CDs probe of different sizes using a new combination of carbon and nitrogen sources. Our results show that the structural characteristics (i.e., the surface density of emissive traps and bandgaps levels) depend on the size of the CDs, which ultimately influences their optical properties. This work also demonstrates the development of a two-photon dual-emissive fluorescent multifunctional probes (3-FCDs) by conjugating fluorescein isothiocyanate on the surface of nitrogen-doped CDs. 3-FCDs show excellent near-infrared two-photon excitation ability, single-wavelength excitation, high photostability, biocompatibility, low cytotoxicity, and good cell permeability. Using two-photon fluorescence imaging, our multifunctional probe shows excellent deep-tissue high-resolution imaging capabilities with penetration depth up to 3000 and 280 μm in hydrogel scaffold and pigskin tissue, respectively. The designed probe exhibits ultrasensitivity and specificity toward Fe 3+ ions with a remarkable detection limit of 2.21 nM using two-photon excitation. In addition, we also demonstrate the use of multifunctional CDs probe for ultrasensitive exogenous and real-time endogenous sensing of Fe 3+ ions and imaging in live fibroblasts with rapid response times for intracellular ferric ion detection.

The development of suitable synthetic scaffolds for use as human tendon grafts to repair tendon ruptures remains a significant engineering challenge. Previous synthetic tendon grafts have demonstrated suboptimal tissue ingrowth and synovitis due to wear particles from fiber-to-fiber abrasion. In this study, we present a novel fiber-reinforced hydrogel (FRH) that mimics the hierarchical structure of the native human tendon for synthetic tendon graft material. Ultrahigh molecular weight polyethylene (UHMWPE) fibers were impregnated with either biosynthetic polyvinyl alcohol/gelatin hydrogel (FRH-PG) or with polyvinyl alcohol/gelatin + strontium-hardystonite (Sr-Ca 2 ZnSi 2 O 7 , Sr-HT) composite hydrogel (FRH-PGS). The scaffolds were fabricated and assessed to evaluate their suitability for tendon graft applications. The microstructure of both FRH-PG and FRH-PGS showed successful impregnation of the hydrogel component, and the tendon scaffolds exhibited equilibrium water content of ∼70 wt %, similar to the values reported for native human tendon, compared to ∼50 wt % water content retained in unmodified UHMWPE fibers. The tensile strength of FRH-PG and FRH-PGS (77.0-81.8 MPa) matched the range of human Achilles' tendon tensile strengths reported in the literature. In vitro culture of rat tendon stem cells showed cell and tissue infiltration into both FRH-PG and FRH-PGS after 2 weeks, and the presence of Sr-HT ceramic particles influenced the expression of tenogenic markers. On the other hand, FRH-PG supported the proliferation of murine C2C12 myoblasts, whereas FRH-PGS seemingly did not support it under static culture conditions. In vivo implantation of FRH-PG and FRH-PGS scaffolds into full-thickness rat patellar tendon defects showed good collagenous tissue ingrowth into these scaffolds after 6 weeks. This study demonstrates the potential viability for our FRH-PG and FRH-PGS scaffolds to be used for off-the-shelf biosynthetic tendon graft material.

The induced pluripotent stem cell (iPSC) is a promising cell source for tissue regeneration. However, the therapeutic value of iPSC technology is limited due to the complexity of induction protocols and potential risks of teratoma formation. A trans-differentiation approach employing natural factors may allow better control over reprogramming and improved safety. We report here a novel approach to drive trans-differentiation of human fibroblasts into functional osteoblasts using insulin-like growth factor binding protein 7 (IGFBP7). We initially determined that media conditioned by human osteoblasts can induce reprogramming of human fibroblasts to functional osteoblasts. Proteomic analysis identified IGFBP7 as being significantly elevated in media conditioned with osteoblasts compared with those with fibroblasts. Recombinant IGFBP7 induced a phenotypic switch from fibroblasts to osteoblasts. The switch was associated with senescence and dependent on autocrine IL-6 signaling. Our study supports a novel strategy for regenerating bone by using IGFBP7 to trans-differentiate fibroblasts to osteoblasts., (© 2020 The Authors. STEM CELLS TRANSLATIONAL MEDICINE published by Wiley Periodicals, Inc. on behalf of AlphaMed Press.)

Injectable bone cement (IBC) such as those based on methacrylates and hydraulic calcium phosphate and calcium sulfate-based cements have been used extensively for filling bone defects with acceptable clinical outcomes. There is a need however for novel IBC materials that can address some of the inherent limitations of currently available formulations to widen the clinical application of IBC. In this study, we characterized a novel hydraulic IBC formulation consisting of bioactive strontium-doped hardystonite (Sr-HT) ceramic microparticles and sodium dihydrogen phosphate, herein named Sr-HT phosphate cement (SPC). The resultant cement is comprised of two distinct amorphous phases with embedded partially reacted crystalline reactants. The novel SPC formulation possesses a unique combination of physicochemical properties suitable for use as an IBC, and demonstrates in vitro cytocompatibility when seeded with primary human osteoblasts. In vivo injection of SPC into rabbit sinus defects show minor new bone formation at the SPC periphery, similar to those exhibited in sinus defects filled with a clinically available calcium phosphate cement. The current SPC formulation presented in this paper shows promise as a clinically applicable IBC which can be further enhanced with additives., (Copyright © 2018 Elsevier B.V. All rights reserved.)

A photopolymerizable-tyraminated poly(vinyl alcohol) (PVA-Tyr) system that has the ability to covalently bind proteins in their native state was evaluated as a platform for cell encapsulation. However, a key hurdle to this system is the radicals generated during the cross-linking that can cause oxidative stress to the cells. This research hypothesized that incorporation of anti-oxidative proteins (sericin and gelatin) into PVA-Tyr gels would mitigate any toxicity caused by the radicals. The results showed that although incorporation of 1 wt% sericin promoted survival of the fibroblasts, both sericin and gelatin acted synergistically to facilitate long-term 3D cell function. The encapsulated cells formed clusters with deposition of laminin and collagen, as well as remaining metabolically active after 21 d., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Diopside (CaMgSi(2)O(6)) powders and dense ceramics have been shown to be bioactive biomaterials for bone repair. The aim of this study is to prepare bioactive diopside scaffolds and examine their physicochemical and biological properties. X-ray diffraction, scanning electron microscopy (SEM), micro-computerized tomography and energy-dispersive spectrometry were used to analyse the composition, microstructure, pore size and interconnectivity of the diopside scaffolds. The mechanical strength and stability as well as the degradation of the scaffolds were investigated by testing the compressive strength, modulus and silicon ions released, respectively. Results showed that highly porous diopside scaffolds with varying porosity and high interconnectivity of 97% were successfully prepared with improved compressive strength and mechanical stability, compared to the bioglass and CaSiO(3) scaffolds. The bioactivity of the diopside scaffolds was assessed using apatite-forming ability in simulated body fluids (SBF) and by their support for human osteoblastic-like cell (HOB) attachment, proliferation and differentiation using SEM, and MTS and alkaline phosphatase activity assays, respectively. Results showed that diopside scaffolds possessed apatite-forming ability in SBF and supported HOB attachment proliferation and differentiation. Bioactive diopside scaffolds were prepared with excellent pore/structure art, and improved mechanical strength and mechanical stability, suggesting their possible applications for bone tissue engineering regeneration., (Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

In this study we developed novel scaffolds through the controlled substitution and incorporation of strontium and zinc into a calcium-silicon system to form Sr-Hardystonite (Sr-Ca(2)ZnSi(2)O(7), Sr-HT). The physical and biological properties of Sr-HT were compared to Hardystonite (Ca(2)ZnSi(2)O(7)) [HT]. We showed that Sr-HT scaffolds are porous with interconnected porous network (interconnectivity: 99%) and large pore size (300-500 microm) and an overall porosity of 78%, combined with a relatively high compressive strength (2.16+/-0.52 MPa). These properties are essential for enhancing bone ingrowth in load-bearing applications. Sr-HT ceramic scaffolds induced the attachment and differentiation of human bone derived cells (HOB), compared to that for the HT scaffolds. Sr-HT scaffolds enhanced expression of alkaline phosphatase, Runx-2, osteopontin, osteocalcin and bone sialoprotein. The in vivo osteoconductivity of the scaffolds was assessed at 3 and 6 weeks following implantation in tibial bone defects in rats. Histological staining revealed rapid new growth of bone into the pores of the 3D scaffolds with the Sr-HT and HT, relative to the beta-tricalcium phosphate (beta-TCP). In vivo, HT and Sr-HT produced distinct differences in the patterns of degradation of the materials, and their association with TRAP positive osteoclast-like cells with HT appearing more resistant compared to both Sr-HT and beta-TCP., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Introduction: The objective was to evaluate the changes in S100A8 S100A9, and their complex (S100A8/S100A9) in cartilage during the onset of osteoarthritis (OA) as opposed to inflammatory arthritis., Methods: S100A8 and S100A9 protein localization were determined in antigen-induced inflammatory arthritis in mice, mouse femoral head cartilage explants stimulated with interleukin-1 (IL-1), and in surgically-induced OA in mice. Microarray expression profiling of all S100 proteins in cartilage was evaluated at different times after initiation of degradation in femoral head explant cultures stimulated with IL-1 and surgically-induced OA. The effect of S100A8, S100A9 or the complex on the expression of aggrecan (Acan), collagen II (Col2a1), disintegrin and metalloproteases with thrombospondin motifs (Adamts1, Adamts 4 &Adamts 5), matrix metalloproteases (Mmp1, Mmp3, Mmp13 &Mmp14) and tissue inhibitors of metalloproteinases (Timp1, Timp2 &Timp3), by primary adult ovine articular chondrocytes was determined using real time quantitative reverse transcription polymerase chain reaction (qRT-PCR)., Results: Stimulation with IL-1 increased chondrocyte S100a8 and S100a9 mRNA and protein levels. There was increased chondrocyte mRNA expression of S100a8 and S100a9 in early but not late mouse OA. However, loss of the S100A8 staining in chondrocytes occurred as mouse OA progressed, in contrast to the positive reactivity for both S100A8 and S100A9 in chondrocytes in inflammatory arthritis in mice. Homodimeric S100A8 and S100A9, but not the heterodimeric complex, significantly upregulated chondrocyte Adamts1, Adamts4 and Adamts 5, Mmp1, Mmp3 and Mmp13 gene expression, while collagen II and aggrecan mRNAs were significantly decreased., Conclusions: Chondrocyte derived S100A8 and S100A9 may have a sustained role in cartilage degradation in inflammatory arthritis. In contrast, while these proteins may have a role in initiating early cartilage degradation in OA by upregulating MMPs and aggrecanases, their reduced expression in late stages of OA suggests they do not have an ongoing role in cartilage degradation in this non-inflammatory arthropathy.

The host response to titanium alloy (Ti-6Al-4V) is not always favorable as a fibrous layer may form at the skeletal tissue-device interface, causing aseptic loosening. Recently, sphene (CaTiSiO(5)) ceramics were developed by incorporating Ti in the Ca-Si system, and found to exhibit improved chemical stability. The aim of this study is to evaluate the in vitro response of human osteoblast-like cells, human osteoclasts and human microvascular endothelial cells to sphene ceramics and determine whether coating Ti-6Al-4V implants with sphene enhances anchorage to surrounding bone. The study showed that sphene ceramics support human osteoblast-like cell attachment with organized cytoskeleton structure and express increased mRNA levels of osteoblast-related genes. Sphene ceramics were able to induce the differentiation of monocytes to form functional osteoclasts with the characteristic features of f-actin and alpha(v)beta(3) integrin, and express osteoclast-related genes. Human endothelial cells were also able to attach and express the endothelial cell markers ZO-1 and VE-Cadherin when cultured on sphene ceramics. Histological staining, enzyme histochemistry and immunolabelling were used for identification of mineralized bone and bone remodelling around the coated implants. Ti-6Al-4V implants coated with sphene showed new bone formation and filled the gap between the implants and existing bone in a manner comparable to that of the hydroxyapatite coatings used as control. The new bone was in direct contact with the implants, whereas fibrous tissue formed between the bone and implant with uncoated Ti-6Al-4V. The in vivo assessment of sphene-coated implants supports our in vitro observation and suggests that they have the ability to recruit osteogenic cells, and thus support bone formation around the implants and enhance osseointegration.

The host response to titanium and its alloys is not always favorable, as a fibrous layer may form at the skeletal tissue-device interface, causing aseptic loosening. Therefore, a great deal of current orthopedic research is focused on developing implants with improved osseointegration properties in order to increase their clinical success. Promising new studies have been reported regarding coating the currently available implants with various coating materials and techniques so as to improve the long-term stability of implants. This article will discuss various coating materials developed, their advantages and disadvantages as coating materials and their biological performance.

Poly(lactide-co-glycolide) (PLGA) has been widely used for bone tissue regeneration. However, it lacks hydrophilicity, bioactivity and sufficient mechanical strength and its acidic degradation by-products can lead to pH decrease in the vicinity of the implants. Mesoporous bioactive glass (MBG) with highly ordered structure (pore size 2-50nm) possesses higher bioactivity than non-mesoporous bioactive glass (BG). The aim of this study is to investigate the effect of MBG on the mechanical strength, in vitro degradation, bioactivity, cellular response and drug release of PLGA films and optimize their physicochemical, biological and drug-delivery properties for bone tissue engineering application. The surface and inner microstructure, mechanical strength and surface hydrophilicity of MBG/PLGA and BG/PLGA films were tested. Results indicated that MBG or BG was uniformly dispersed in the PLGA films. The incorporation of MBG into PLGA films significantly improved their tensile strength, modulus and surface hydrophilicity. MBG/PLGA resulted in an enhanced mechanical strength, in vitro degradation (water absorbance, weight loss and ions release), apatite-formation ability and pH stability in simulated body fluids (SBF), compared to BG/PLGA. MBG/PLGA and BG/PLGA films enhanced human osteoblastic-like cells (HOBs) attachment, spreading and proliferation compared to PLGA. HOBs differentiation was significantly upregulated when cells were cultured on 30 MBG/PLGA for 14 days, compared to 30 BG/PLGA. MBG/PLGA enhanced the accumulative release of dexamethazone (DEX) at early stages (0-200h) compared to BG/PLGA, however, after 200h, DEX-release rates for MBG/PLGA was slower than that of BG/PLGA. The contents of MBG in PLGA films can control the amount of DEX released. Taken together, MBG/PLGA films possessed excellent physicochemical, biological and drug-release properties, indicating their potential application for bone tissue engineering by designing 3D scaffolds according to their corresponding compositions.

Novel Ca-Si-Ti-based sphene (CaTiSiO5) ceramics possess excellent chemical stability and cytocompatibility. The aim of this study was to prepare sphene coating on titanium alloy (Ti-6Al-4V) for orthopaedic applications using the plasma spray method. The phase composition, surface and interface microstructure, coating thickness, surface roughness and bonding strength of the plasma-sprayed sphene coating were analysed using X-ray diffraction, scanning electron microscopy, atomic force microscopy and the standard mechanical testing of the American Society for Testing and Materials, respectively. The results indicated that sphene coating was obtained with a uniform and dense microstructure at the interface of the Ti-6Al-4V surface and the thickness and surface roughness of the coating were approximately 150 and 10 microm, respectively. Plasma-sprayed sphene coating on Ti-6Al-4V possessed a significantly improved bonding strength and chemical stability compared with plasma-sprayed hydroxyapatite (HAp) coating. Plasma-sprayed sphene coating supported human osteoblast-like cell (HOB) attachment and significantly enhanced HOB proliferation and differentiation compared with plasma-sprayed HAp coating and uncoated Ti-6Al-4V. Taken together, plasma-sprayed sphene coating on Ti-6Al-4V possessed excellent bonding strength, chemical stability and cellular bioactivity, indicating its potential application for orthopaedic implants.

In this study we have developed Ca(3)ZrSi(2)O(9) (Baghdadite) ceramics by incorporating Zirconium in Ca-Si system and determined their biological properties. Ca(3)ZrSi(2)O(9) ceramics possess apatite-formation ability in simulated body fluid, indicating their potential bioactivity. The response of human osteoblast like cells (HOB), osteoclast and endothelial cells when cultured on Ca(3)ZrSi(2)O(9) ceramics was investigated. Scanning electron microscopy and immunofluorescence studies demonstrated that this material supports HOB cell attachment with organized cytoskeleton structure. Compared to CaSiO(3), Ca(3)ZrSi(2)O(9) ceramics induced increased HOB proliferation and differentiation as shown by increased methyltetrazidium salt (MTS), alkaline phosphatase activity, and mRNA expression levels of bone-related genes (Collagen type I, alkaline phosphatase, Bone Sialoprotein, receptor activator of NF-kappaB ligand and osteoprotegerin). Ca(3)ZrSi(2)O(9) ceramics supported the fusion of monocytes to form functional osteoclasts with their characteristic features of f-actin ring structures and the expression of alpha(v)beta(3) integrin consistent with functional activity. Osteoclasts cultured on Ca(3)ZrSi(2)O(9) expressed increased levels of osteoclast-related genes; Cathepsin K, Carbonic Anhydrase II, Matrix metalloproteinase-9, receptor activator of NF-kappaB and Calcitonin Receptor, consistent with the formation of functional osteoclasts. In addition to HOB and osteoclasts, Ca(3)ZrSi(2)O(9) supported the attachment of endothelial cells, which expressed the endothelial cell markers; ZO-1 and VE-Cadherin. Results presented here indicate that Ca(3)ZrSi(2)O(9) ceramics have the potential for applications in bone tissue regeneration.

Ca-Si system ceramics, in particular CaSiO(3) ceramics, are regarded as potential bioactive bone repair/regeneration material. However, their high dissolution rate limits their biological applications. The aim of this study was to incorporate Zinc (Zn) into the Ca-Si system ceramics to produce part (at 10 and 20% Zn) or complete (at 50% Zn) new crystal phase (hardystonite: Ca(2)ZnSi(2)O(7)) with improved chemical stability and cellular activity. Zn-Ca-Si ceramics with four Zn contents (0, 10, 20, and 50%) were successfully prepared by sintering sol-gel-derived Zn-Ca-Si powder compacts. A new pure crystal phase Ca(2)ZnSi(2)O(7) was formed only when 50% Zn was added. The chemical stability of Zn-Ca-Si ceramics was evaluated by soaking in simulating body fluid (SBF), and the ion release from ceramics and the change in pH values of the SBF were measured. Their ability to form apatite in SBF was determined by analyzing the surface phase composition and morphology of the ceramics using X-ray diffraction and scanning electron microscopy (SEM). Results indicated that, with the increase of Zn contents, the chemical stability of ceramics increased while the apatite-formation ability decreased. The ability of Zn-Ca-Si ceramics to support attachment, proliferation, and differentiation of the human bone osteoblastic-like cells (HOB) was assessed using SEM, MTS, and alkaline phosphate activity assays, respectively. Zn-Ca-Si ceramics supported HOB attachment and their proliferation increased with the increase of Zn content. ALP activity of HOB on Zn-Ca-Si ceramics with 50% Zn (Ca(2)ZnSi(2)O(7)) was the highest among the levels obtained for the four ceramics tested. Taken together, Ca(2)ZnSi(2)O(7) ceramics possessed the best chemical stability and cellular bioactivity in Zn containing Ca-Si ceramics, indicating their potential application in skeletal tissue regeneration.