Search

Due to high cost of certified reference materials (CRMs), reference materials (RMs) are preferred to check the method performance in environmental analysis. In this work, a laboratory reference material (LRM) was prepared and characterised to carry out the quality control in monitoring analysis of eight polycyclic aromatic hydrocarbons (PAHs) and nine trace metals in mussel tissue. Mussels were collected in a naturally polluted area. Before the reference material was bottled, the mussel tissue was stabilised by freeze-drying, ground and sieved. For the material characterisation, several statistical tests were applied to check the homogeneity of the analytes in the tissue, and a stability test was performed to study the effect of the storage temperature in the analyte concentration. Other characteristics such as specific density, moisture and lipid contents as well as particle size distribution of the material were determined. Although the LRM had a homogeneous distribution for all PAHs and almost all metals, the stability study showed different results at both storage temperatures studied. For both PAHs and trace metals, the material was suitable to assure the quality control of the analysis., (Copyright 2010 Elsevier B.V. All rights reserved.)

Mussels are used as bioindicators of chemical pollution in coastal and estuarine waters. We measured the concentrations of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalate esters (PEs), butyltins, and metals (Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, V, and Zn) in mussel tissues collected from the lower Bilbao estuary (Arriluze, north of Spain) every 2 months from November 2002 to March 2004. The concentration (microg g(-1) dry weight) of PAHs, PCBs, and PEs ranged from 5.1 to 18.3, from 0.04 to 0.2, and from 1.5 to 27.6, respectively. Temporal pattern variations, including maximum and minimum values, were determined for metals and BTs from their concentration profiles during a period of 1 year. The main feature of organic microcontaminants was relatively high concentration values, reflecting the overall industrial and harbour activities of the site. Moreover, the ratios of methylated species and certain other diagnostic ratios suggested a petrogenic origin for PAHs. Finally, the relations among the concentrations found in mussel tissues and the levels of several cell biomarkers were established by a partial least squares model.

From February 2004 to April 2006, the concentrations of more than 10 metals in mussels (Mytilus galloprovincialis) were measured in 10 stations from Galicia to the Basque Country in 8 different times of sampling. The mean highest concentrations are found for Zn [226.8 microg/g, dry weight (d.w.)] followed by Mn, As, Cu, and Co (between 10 and 25 microg/g d.w.). Lower mean concentrations are found for Se, Cr, Pb, V, and Ni (between 2 and 8 microg/g d.w.) and the lowest are for Cd, Sn, Hg, and Sb (between 0.05 and 1 microg/g d.w.). Among the statistical treatments used, the factor analysis showed a clustering of the mussels according to the geographical location. In addition, the temporal trend of the metal concentrations was studied by means of the Mann-Kendall test. In this sense, some stations showed a decreasing trend in the accumulation of the metallic content. However, there were some local pollution events that could be explained as a consequence of anthropogenic activities. Finally, the effects of the oil spill from the Prestige are discussed based on the experimental Ni/V ratio values obtained from this work and those of the original oil.

The seasonal and spatial variability of trace metal concentrations of oyster tissues (Crassostea sps.) was studied. The samples were collected between 2002 and 2004 along the Urdaibai estuary (Murueta, Kanala and Arteaga). The seasonal influence on some metal concentrations (higher values in spring-summer season than in autumn-winter season) is more pronounced than the local site-specific influence. Furthermore, within each location a significant time-specific dependence on the trace metal concentration variations can be detected. Substantially higher concentrations of Zn (445.5-2,403.3 mg kg(-1)) and Mn (29.4-169.6 mg kg(-1)) were recorded in oysters inhabiting estuarine locations, possibly indicating a markedly higher natural bioavailability at these locations. Principal component analysis demonstrated that oysters could be separated depending on the inhabiting areas: Sn for Murueta, essential metals for Kanala, and Co and Cd for Arteaga sampling points, respectively.

The relationship between the microbial methylation of mercury and the microbial activities in sediments and water collected from the estuary of Bilbao (North of Spain) was studied in three different sampling points and in two different seasons. Three different cultures were prepared with a sediment slurry to distinguish between biotic and abiotic methylation pathways and the variations of the methylmercury concentration and the variations of the population of total number of bacteria (TDC), anaerobic heterotrophic bacteria (AHB), sulphate-reducing bacteria (SRB) and Desulfovibrio were measured. From this work, it can be concluded that the variation of MeHg concentrations is a result of the methylation/demethylation processes in the sediments, and that the abiotic processes have a negligible contribution to those processes. According to the statistical analysis of the results (partial least squares analysis) a significant statistical correlation was established between methylmercury and the SRB counts.

Along 10 campaigns, from June 2002 to September 2004, the concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were measured in sediments and oysters (Crassostrea sp.) taken from four sites in the Unesco protected natural reserve of Urdaibai (Basque Country, Bay of Biscay). Total PAH concentration ranged from 0.7 to 140 microg kg(-1) (dw) in the case of sediments, and from 300 to 1400 microg kg(-1) (dw) in the case of oysters. During this study, the coast of the Bay of Biscay was severely affected by the Prestige oil spill (November 2002). Presumably, as a consequence of this accident, both spatial and temporal variations of the PAHs, as well as the sources of the PAHs were affected by the oil spill, and this effect was observed in the total concentrations and, especially, in several diagnostic ratios and in multivariate data analysis. Finally, both BAF (bioaccumulation factor) and BSAF (biota-sediment accumulation factor) parameters were calculated to conclude that particulate matter seems to be the most favourable uptake pathway of PAHs in oysters from this estuary.

The feasibility of different clean-up procedures was studied for the determination of polycyclic aromatic hydrocarbons (PAHs) in biota samples such as oysters, mussels and fish liver. In this sense, once the samples were extracted--essentially with acetone and in a microwave system--and before they could be analysed by gas chromatography-mass spectrometry (GC-MS), three different approaches were studied for the clean-up step: solid phase extraction (SPE), microwave-assisted saponification (MAS) and gel permeation chromatography (GPC). The main aim of this work was to maximise the recoveries of PAHs and to minimise the presence of interfering compounds in the last extract. In the case of SPE, Florisil cartridges of 1, 2 and 5 g, and silica cartridges of 5 g were studied. In that case, and with oysters and mussels, microwave-assisted extraction and 5 g Florisil cartridges provided good results. In addition, the concentrations obtained for Standard Reference Material (SRM) NIST 2977 (mussel tissue) were in good agreement with the certified values. In the case of microwave-assisted saponification, the extracts were not as clean as those obtained with 5 g Florisil and this fact lead to overestimate the concentration of the heaviest PAHs. Finally, the cleanest extracts were obtained by GPC. The method was successfully applied to mussels, oysters and hake liver, and the results obtained for NIST 2977 (mussel tissue) were within the confidence interval of the certified reference material for most of the certified analytes.

A new method was developed for the simultaneous extraction of polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), phthalate esters (PEs), nonylphenols (NPs) and nonylphenol mono- and diethoxylates (NP1EOs and NP2EOs, respectively) in sediment samples by means of a closed microwave system. The extractions were carried out at 21 psi and 80% of microwave power and 15 ml of acetone were used as the common extraction solvent. The filtered extract was further fractionated in two groups using Florisil cartridges: PAHs and PCBs were eluted with n-hexane:toluene (4:1) and the PEs, NPs and ethoxylates were eluted with ethyl acetate. All the compounds were analysed by gas chromatography-mass spectrometry (GC-MS). In case of PAHs and PCBs, the developed method was validated by comparison of the results obtained for the certified reference material NIST 1944 with the certified values. In the absence of a reference material for phthalate esters and nonylphenols, one sediment sample was extracted twice under the optimal conditions in order to check than an exhaustive extraction of the analytes occurred. This method is currently used in the study of the distribution of those organic contaminants in the estuaries of the Bay of Biscay (Spain).

Flow-injection-hydride generation procedure for Se in electrolytic manganese was optimized by means of the experimental design approach. Instrumental variables like power supplied (P), sample (F) and argon (G) flow rates together with chemical variables like NaBH(4) and HCl concentrations were studied. In case of the chemical variables, it was concluded that sodium tetrahydridoborate concentrations higher than 1.0% extinguished the plasma while HCl concentration should always be higher than 0.6moldm(-3). The analysis of effects suggested that all the instrumental variables are significant factors, and the optimum conditions were P=1550W, F=4.75mLmin(-1) and G=0.6mLmin(-1). The influence of Mn was specially studied and it was concluded that the interferences were negligible if Mn is below 2.0gL(-1). In the same sense, the interferences of antimony(III), arsenic(V) and mercury(II) were also considered negligible. Finally, a detection limit of 0.0005% (w/w) was obtained (a repeatability R.S.D. <2.0% for all Se concentrations tried). Some manganese samples were also spiked with different concentrations of Se(IV) and the results demonstrated to be in good statistical agreement with expected values.

Inorganic mercury and methylmercury are determined in natural waters by injecting the filtered samples onto a low cost commercial flow injection system in which an anion exchange microcolumn is inserted after the injection loop (FIA-IE). If hydrochloric acid is used as the carrier solution, the HgCl4(2-) species (inorganic mercury) will be retained by the anion exchanger while the CH3HgCI species (methylmercury) will flow through the resin with negligible retention. Four anion exchangers and seven elution agents were checked, in a batch mode, to search for the best conditions for optimal separation and elution of both species. Dowex M-41 and L-cysteine were finally selected. Mercury detection was performed by cold vapour-electrothermal atomic adsorption spectrometry (HG-ETAAS). Both systems were coupled to perform the continuous on-line separation/detection of both inorganic mercury and methylmercury species. Separation and detection conditions were optimized by two chemometric approaches: full factorial design and central composite design. A limit of detection of 0.4 microg L(-1) was obtained for both mercury species (RSD < 3.0% for 20 microg L(-1) inorganic and methylmercury solutions). The method was applied to mercury speciation in natural waters of the Nerbioi-lbaizabal estuary (Bilbao, North of Spain) and recoveries of more than 95% were obtained.

A validation study was carried out in order to evaluate the efficiency of inductively coupled plasma-optical emission spectrometry (ICP-OES) for the analysis of minor elements (manganese, chromium, copper, iron, and titanium) in aluminium alloys. Aluminium casting samples were obtained by adding compressed powder compacts of each alloying element and aluminium (minitablets) to aluminum baths in a laboratory crucible furnace. Digestion of solid samples was performed using concentrated HCI and H202 35% (v/v) previous to analysis by ICP-OES without any matrix separation. This solution-based method was validated considering direct current arc spectrometry as the reference method based on direct analysis without any pretreatment of the solid samples considered. Univariate statistical procedures were carried out, for which precision <3% and trueness of the analytical results were taken into account.

The thermodynamic model of inorganic arsenic was validated by comparing the predicted As(III) concentration with the experimentally determined one in several river waters samples of the Basque Country (Spain) collected in two sampling campaigns: spring and autumn 2000. This model takes into account the acid-base equilibria of As(III) and As(V) together with the redox equilibria between the H(3)AsO(3) and H(3)AsO(4) species. A correct prediction of As(III) concentration requires the knowledge of the total concentration of arsenic, pH, redox potential (referred to hydrogen electrode), and ionic strength values of the solution. The estimation of the activity coefficients of the arsenic species was performed by means of the Modified Bromley's Methodology (MBM). In order to perform the experimental As(III) determination, an analytical method was implemented by using an ion exchange separation of As(III)/As(V) on a continuous FIA-IE-HG-AAS system. The total arsenic concentration was determined together with total concentration of the main alkaline or alkaline-earth metals and anions in the natural waters. Temperature compensated measurements of the pH and redox potentials were made in-situ at the sampling sites. For both seasonal campaigns, the agreement between predicted and experimental As(III) is really high for those samples belonging to non polluted river waters.

Solid-phase microextraction coupled to GC-MS was optimised for the determination of polycyclic aromatic hydrocarbons (PAHs), phthalate esters and polychlorinated biphenyls (PCBs) in water samples. A 30-microm polydimethylsiloxane fiber was immersed in a 30-ml water sample that contained the analytes of interest (PAHs, PCBs and phthalate esters) and the variables studied were extraction time (15-60 min), extraction temperature (30-90 degrees C), desorption time (1-5 min), desorption temperature (220-270 degrees C) and the addition of sodium chloride (0-9 g). The MultiSimplex programme based on the simplex algorithm was used to establish the optimal conditions. MultiSimplex allowed the simultaneous study of the variables mentioned above and considered the answers of all types of compounds studied in this work. Thus, the optimal conditions obtained allowed the simultaneous determination of PAHs, phthalate esters and PCBs. Furthermore, the accuracy and repeatability of the developed method were calculated from water samples spiked at known concentrations of the analytes. Finally, the optimised method was used to analyse water samples from different sampling points of the Urdaibai and Nerbioi-Ibaizabal estuaries (Biscay, Spain).

Blood plasma of 253 specimens from eight population samples of the sciaenid fish, pescada (Plagioscion squamosissimus), caught from four sites in the Central Amazon, was tested for molecular variants of transferrin. Starch gel electrophoresis was used to distinguish six species of transferrin molecules; 12 of the 21 theoretically possible genotypes were found. There were highly significant departures from genetic equilibrium in seven of the eight population samples (chi-square (chi(2)) test for Hardy-Weinberg expectations) due to an excess of homozygotes and a corresponding deficiency of heterozygotes. A dendrogram based on UPGMA cluster analysis of genetic distances at the transferrin gene locus, estimated among the population samples and statistical analyses of the distribution of Tf allele frequencies, indicated three genetically discreet sub-populations of P. squamosissimus. The three sub-populations, "Careiro/Iranduba", "Coari" and "Tefe", were found to have high frequencies of alleles Tf(2), Tf(4) and Tf(3), respectively. This genetic instability may be attributed to genetically discreet "allopatric stocklets", which diverged during past isolation.

Protonation constants of arsenic acid were determined at different ionic strengths in NaClO(4) (0.1, 0.5, 1.0, 3.0 mol dm(-3)), NaCl (0.5 and 1.0 mol dm(-3)) and KCl (0.5, 1.0 and 3.0 mol dm(-3)) ionic media by means of a potentiometric study. The distribution of arsenate species was defined depending on two important variables in natural environments: pH and composition. All the experimentation was performed at 25 degrees C. The differences found in the protonation constants for different medium compositions, were explained by the different behaviour of the interaction parameters of the species considered in the different media and ionic strengths. These parameters were reported for all hydrolitic As(V) species and were calculated using the Modified Bromley's Methodology (MBM). The corresponding thermodynamic stepwise formation constants were also determined (log degrees K(1)=11.58+/-0.01, log degrees K(2)=7.06+/-0.01, log degrees K(3)=2.25+/-0.01). All the results obtained showed not only the importance of the ionic strength but also of the composition of the ionic medium on the distribution of the acid-base species of As(V) as a function of pH in natural waters.