Search

The characteristics of subvisible particles (SbVPs) are critical quality attributes of injectable and ophthalmic solutions in pharmaceutical manufacturing. However, current compendial SbVP testing methods, namely the light obstruction method and the microscopic particle count method, are destructive and wasteful of target samples. In this study, we present the development of a non-destructive SbVP analyzer aiming to analyze SbVPs directly in drug product (DP) containers while keeping the samples intact. Custom sample housings are developed and incorporated into the analyzer to reduce optical aberrations introduced by the curvature of typical pharmaceutical DP sample containers. The analyzer integrates a light-sheet microscope structure and models the side scattering event from a particle with Mie scattering theory with refractive indices as prior information. Equivalent spherical particle size under assigned refractive index values is estimated, and the particle concentration is determined based on the number of scattering events and the volume sampled by the light sheet. The resulting analyzer's capability and performance to non-destructively analyze SbVPs in DP containers were evaluated using a series of polystyrene bead suspensions in ISO 2R and 6R vials. Our results and analysis show the particle analyzer is capable of directly detecting SbVPs from intact DP containers, sorting SbVPs into commonly used size bins (e.g. ≥ 2 µm, ≥ 5 µm, ≥ 10 µm, and ≥ 25 µm), and reliably quantifying SbVPs in the concentration range of 4.6e2 to 5.0e5 particle/mL with a margin of ± 15 % error based on a 90 % confidence interval., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 American Pharmacists Association. Published by Elsevier Inc. All rights reserved.)

The article presents, for the first time, a terahertz metamaterial absorber (TMA) designed in the shape of a cross consisting of four orthogonally positioned horn-shaped patches in succession, to detect brain cancer cells. The design exhibits the property of mu-negative material, indicating magnetic resonance. The proposed TMA has achieved an impressive absorption rate of 99.43% at 2.334 THz and a high Q-factor of 47.15. The sensing capability has been investigated by altering the refractive index of the surrounding medium in the range of 1.3 to 1.48, resulting in a sensitivity of 0.502 THz/RIU. The proposed TMA exhibits complete polarization insensitivity, highlighting this as one of its advantageous features. The adequate sensing capability of the proposed TMA in differentiating normal and cancerous brain cells makes it a viable candidate for an early and efficient brain cancer detector. This research can be the foundation for future research on using THz radiation for brain cancer detection., (© 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.)

Objectives: The biuret method is frequently used to determine serum total protein. On the other hand refractometer, a quicker and less expensive option, is available to determine serum total protein. However, there is no study conducted in Ethiopia to compare serum total protein measurement in veterinary settings. Therefore, this study was conducted to compare the serum total protein concentration measurement in cattle and goats obtained by the biuret method and refractometer., Results: Serum samples from 60 cattle and 60 goats were assayed by both methods and data were analyzed with a paired t-test, Pearson's correlation, and Bland-Altman plots. There was a strong positive correlation between the total protein values determined with the refractometer and the biuret method in cattle (r = 0.93) and goats (r = 0.97). There were no significant differences (p > 0.05) in the protein values measured with the refractometer and those evaluated with the biuret method in both species. Bland-Altman plots showed that biases indicating the analytic and user error were 8.33% in both species which is below the acceptable total error (< 10%). Thus, refractometer can be used in place of biuret method since it is valid enough to measure serum total protein in cattle and goats., (© 2024. The Author(s).)

Significance: Azimuth-resolved optical scattering signals obtained from cell nuclei are sensitive to changes in their internal refractive index profile. These two-dimensional signals can therefore offer significant insights into chromatin organization., Aim: We aim to determine whether two-dimensional scattering signals can be used in an inverse scheme to extract the spatial correlation length ℓ c and extent δ n of subnuclear refractive index fluctuations to provide quantitative information on chromatin distribution., Approach: Since an analytical formulation that links azimuth-resolved signals to ℓ c and δ n is not feasible, we set out to assess the potential of machine learning to predict these parameters via a data-driven approach. We carry out a convolutional neural network (CNN)-based regression analysis on 198 numerically computed signals for nuclear models constructed with ℓ c varying in steps of 0.1    μ m between 0.4 and 1.0    μ m , and δ n varying in steps of 0.005 between 0.005 and 0.035. We quantify the performance of our analysis using a five-fold cross-validation technique., Results: The results show agreement between the true and predicted values for both ℓ c and δ n , with mean absolute percent errors of 8.5% and 13.5%, respectively. These errors are smaller than the minimum percent increment between successive values for respective parameters characterizing the constructed models and thus signify an extremely good prediction performance over the range of interest., Conclusions: Our results reveal that CNN-based regression can be a powerful approach for exploiting the information content of two-dimensional optical scattering signals and hence monitoring chromatin organization in a quantitative manner., (© 2024 The Authors.)

The quantification of physical properties of biological matter gives rise to novel ways of understanding functional mechanisms. One of the basic biophysical properties is the mass density (MD). It affects the dynamics in sub-cellular compartments and plays a major role in defining the opto-acoustical properties of cells and tissues. As such, the MD can be connected to the refractive index (RI) via the well known Lorentz-Lorenz relation, which takes into account the polarizability of matter. However, computing the MD based on RI measurements poses a challenge, as it requires detailed knowledge of the biochemical composition of the sample. Here we propose a methodology on how to account for assumptions about the biochemical composition of the sample and respective RI measurements. To this aim, we employ the Biot mixing rule of RIs alongside the assumption of volume additivity to find an approximate relation of MD and RI. We use Monte-Carlo simulations and Gaussian propagation of uncertainty to obtain approximate analytical solutions for the respective uncertainties of MD and RI. We validate this approach by applying it to a set of well-characterized complex mixtures given by bovine milk and intralipid emulsion and employ it to estimate the MD of living zebrafish (Danio rerio) larvae trunk tissue. Our results illustrate the importance of implementing this methodology not only for MD estimations but for many other related biophysical problems, such as mechanical measurements using Brillouin microscopy and transient optical coherence elastography., Competing Interests: Declaration of interests The authors declare no competing interests., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Significance: Scanning laser optical tomography (SLOT) is a volumetric multi-modal imaging technique that is comparable to optical projection tomography and computer tomography. Image quality is crucially dependent on matching the refractive indexes (RIs) of the sample and surrounding medium, but RI matching often requires some effort and is never perfect., Aim: Reducing the burden of RI matching between the immersion medium and sample in biomedical imaging is a challenging and interesting task. We aim at implementing a post processing strategy for correcting SLOT measurements that have errors caused by RI mismatch., Approach: To better understand the problems with poorly matched Ris, simulated SLOT measurements with imperfect RI matching of the sample and medium are performed and presented here. A method to correct distorted measurements was developed and is presented and evaluated. This method is then applied to a sample containing fluorescent polystyrene beads and a sample made of olydimethylsiloxane with embedded fluorescent nanoparticles., Results: From the simulations, it is evident that measurements with an RI mismatch larger than 0.02 and no correction yield considerably worse results compared to perfectly matched measurements. RI mismatches larger than 0.05 make it almost impossible to resolve finer details and structures. By contrast, the simulations imply that a measurement with an RI mismatch of up to 0.1 can still yield reasonable results if the presented correction method is applied. The experiments validate the simulated results for an RI mismatch of about 0.09., Conclusions: The method significantly improves the SLOT image quality for samples with imperfectly matched Ris. Although the absolutely best imaging quality will be achieved with perfect RI matching, these results pave the way for imaging in SLOT with RI mismatches while maintaining high image quality., (© 2024 The Authors.)

This study presents a novel label-free approach for characterizing cell death states, eliminating the need for complex molecular labeling that may yield artificial or ambiguous results due to technical limitations in microscope resolution. The proposed holographic tomography technique offers a label-free avenue for capturing precise three-dimensional (3D) refractive index morphologies of cells and directly analyzing cellular parameters like area, height, volume, and nucleus/cytoplasm ratio within the 3D cellular model. We showcase holographic tomography results illustrating various cell death types and elucidate distinctive refractive index correlations with specific cell morphologies complemented by biochemical assays to verify cell death states. These findings hold promise for advancing in situ single cell state identification and diagnosis applications.

Objective: Oral cancer is a leading cause of mortality globally, particularly affecting developing regions where oral hygiene is often overlooked. The optical properties of tissues are vital for diagnostics, with polarization imaging emerging as a label-free, contrast-enhancing technique widely employed in medical and scientific research over past few decades., Materials and Methods: We present a novel polarization sensitive quantitative phase imaging of biological tissues by incorporating the conventional polarization microscope and transport of intensity equation-based phase retrieval algorithm. This integration provides access to the birefringence mapping of biological tissues. The inherent optical anisotropy in biological tissues induces the polarization dependent refractive index variations which can provide the detailed insights into the birefringence characteristics of their extracellular constituents. Experimental investigations were conducted on both normal and cancerous oral tissue samples by recording a set of three polarization intensity images for each case with a step size of 2 μm., Results: A noteworthy increment in birefringence quantification was observed in cancerous as compared to the normal tissues, attributed to the proliferation of abnormal cells during cancer progression. The mean birefringence values were calculated for both normal and cancerous tissues, revealing a significant increase in birefringence of cancerous tissues (2.1 ± 0.2) × 10 -2 compared to normal tissues (0.8 ± 0.2) × 10 -2 . Data were collected from 8 patients in each group under identical experimental conditions., Conclusion: This polarization sensitive non-interferometric optical approach demonstrated effective discrimination between cancerous and normal tissues, with various parameters indicating elevated values in cancerous tissues., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

The study was designed to ascertain the diagnostic efficacy of hand-held digital refractometer in determining total protein (TP). The Sipli sheep (n = 128) were grouped as per gender (females = 99, males = 29) and age (G1 = up till 1 year, n = 35; G2 = from 1 to 2 years, n = 63; G3 = above 2 years, n = 30). The results regarding the overall mean (±SE) values for the TPs attained through serum chemistry analyzer (TP1) and hand-held digital refractometer (TP2) were non-significantly (P≥0.05) different (59.2±1.6g/L and 59.8±0.5g/L, respectively). However, the reference intervals (RIs) were quite different for the two TPs being 45.1-95.7g/L and 57.0-67.0g/L for TP1 and TP2, respectively. Similar results were seen for gender-wise and group-wise results. On the contrary, the results regarding correlation coefficient and logilinear regression showed a negative correlation between the two TPs (r = -0.0244) with an adjusted r-square of 0.059 (5.9% probability). Furthermore, the three tests implied to assess the level of agreement between the two methods (Cronbach alpha, Intraclass correlation coefficient, and Bland & Altman test) revealed least agreement between the two methods. In a nutshell, the results of TP through digital refractometer were not in concordance with those attained through serum chemistry analyzer. However, it can cautiously be used if these results are compared with relevant corrected RIs., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Sharif et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Optical scattering has been widely used for aerosol sizing due to its noninvasive and real-time measurement. However, it is crucial to retrieve the particle size distribution (PSD) of aerosols without prior knowledge of the refractive index. Now, it has been a great challenge to measure the refractive index in situ. In this study, a novel PSD sensing method utilizing the light scattering angular spectrum (LSAS) and machine learning techniques is proposed to address this challenge. The complex nonlinear relationship between LSAS and PSD can be constructed while accounting for the refractive index of aerosols. A miniaturized prototype sensor is designed and tested on different sizes of aerosol samples. The experiment results showed that the maximum Kullback-Leibler divergence ( D KL ) of PSD is 0.07, which indicates that the sensing method can provide the ability for highly accurate aerosol PSD measurement without requiring prior knowledge of the refractive index. The compacted prototype sensor shows great potential for aerosol analysis in conventional field measurements outside the laboratory.

A novel model of human corneal birefringence is presented. The cornea is treated as a homogeneous biaxial linear birefringent medium in which the values of the binormal axes angle and organization of the main refractive indices vary continuously from the apex to the limbus. In its central part, the angle between binormal axes is 35°, and para centrally, it smoothly increases to 83.7°. The values of the main refractive indices (n x , n y , n z ) change, as well as their order, from n x  < n z  < n y to n z  < n x  < n y . The transition between these two states was described with a normal distribution (μ = 0.45, σ = 0.1). The presented model corresponds with the experimental results presented in the literature. To our knowledge, it is the first model that presents the anisotropic properties' distributions of the entire cornea. The presented model facilitates a better understanding of the corneal birefringence phenomenon directly related to its lamellar structure., (© 2024. The Author(s).)

The intracapsular accommodation mechanism (IAM) may be understood as an increase in the lens equivalent refractive index as the eye accommodates. Our goal was to evaluate the existence of an IAM by analysing observed changes in the inner curvature gradient of the lens. To this end, we fitted a gradient index and curvature lens model to published experimental data on external and nucleus geometry changes during accommodation. For each case analysed, we computed the refractive power and equivalent index for each accommodative state using a ray transfer matrix. All data sets showed an increase in the effective refractive index, indicating a positive IAM, which was stronger for older lenses. These results suggest a strong dependence of the lens equivalent refractive index on the inner curvature gradient., (© 2024 The Authors. Ophthalmic and Physiological Optics published by John Wiley & Sons Ltd on behalf of College of Optometrists.)

Polyethylene glycol (PEG) has found tremendous applications in pharmaceutical products and has played a critical role in PEGylated drug modalities to improve pharmacokinetic properties and biological efficacy. The characterization and quantitation of PEGs are essential to control manufacture process and drug product quality. However, the assay value of PEG could change dramatically depending on the structures of the PEG and the detection techniques used. In this study, we developed a size exclusion chromatographic (SEC) method for quantitative PEG analysis, and we systematically evaluated the performance of three online detectors with different operating principles: a charged aerosol detector (CAD), a differential refractive index (dRI) detector, and a multi-angle light scattering detector (MALS). Fourteen PEG compounds covering a wide range of molecular weight (MW, 1 - 40 kDa) and molecular architectures (linear, branched, Y-shaped and multi-arm geometries) were evaluated by these three detection techniques. Our study revealed that the dRI showed the most universal responses among all the PEGs regardless of their molecular weight or geometries. In the contrast, CAD and MALS detector showed MW-dependent and semi-universal geometry-dependent responses. Another key finding is that the relative response factor for each multi-arm PEG in the CAD and the MALS were inversely correlated, suggesting both can be applied to qualitatively assess polymers of different architectures, including the ones with subtle differences in their core structures. The comparison of the three detectors not only provides the fundamental and comprehensive understanding of PEG quantitation but also enables the process development and control of high-quality PEGs in producing PEGylated therapeutics in the pharmaceutical industry., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

The vital role of bile canaliculus (BC) in liver function is closely related to its morphology. Electron microscopy has contributed to understanding BC morphology; however, its invasiveness limits its use in living specimens. Here, we report non-invasive characterization of BC formation using refractive index (RI) tomography. First, we investigated and characterized the RI distribution of BCs in two-dimensional (2D) cultured HepG2 cells. BCs were identified based on their distinct morphology and functionality, as confirmed using a fluorescence-labeled bile acid analog. The RI distribution of BCs exhibited three common features: (1) luminal spaces with a low RI between adjacent hepatocytes; (2) luminal spaces surrounded by a membranous structure with a high RI; and (3) multiple microvillus structures with a high RI within the lumen. Second, we demonstrated the characterization of BC structures in a three-dimensional (3D) culture model, which is more relevant to the in vivo environment but more difficult to evaluate than 2D cultures. Various BC structures were identified inside HepG2 spheroids with the three features of RI distribution. Third, we conducted comparative analyses and found that the BC lumina of spheroids had higher circularity and lower RI standard deviation than 2D cultures. We also addressed comparison of BC and intracellular lumen-like structures within a HepG2 spheroid, and found that the BC lumina had higher RI and longer perimeter than intracellular lumen-like structures. Our demonstration of the non-destructive, label-free visualization and quantitative characterization of living BC structures will be a basis for various hepatological and pharmaceutical applications.

Optical properties of biological tissues, such as refractive index, are fundamental properties, intrinsically linked to a tissue's composition and structure. This study aims to investigate the variation of refractive index (RI) of human articular cartilage along the tissue depth (via collagen fibril orientation and optical density) and integrity (based on Mankin and Osteoarthritis Research Society International (OARSI) scores). The results show the relationship between RI and PG content ( p =0.042), collagen orientation ( p =0.037), and OARSI score ( p =0.072). When taken into account, the outcome of this study suggests that the RI of healthy cartilage differs from that of pathological cartilage ( p =0.072). This could potentially provide knowledge on how progressive tissue degeneration, such as osteoarthritis, affects changes in cartilage RI, which can, in turn, be used as a potential optical biomarker of tissue pathology.

Hardly published data are available to diagnose the failure of transfer of passive immunity (FTPI) in calves affected by neonatal calf diarrhea (NCD). This study evaluated the diagnostic performance and differences among optical serum total protein (STP) concentration and gamma-glutamyl-transferase (GGT) activity for assessing FTPI in diarrheic Holstein Friesian calves. 72 diarrheic and 19 healthy Holstein Friesian calves aged 1 to 10 days were enrolled. Each calf underwent a complete clinical examination and dehydration assessment. The effect of dehydration status and age on the correlation between the two methods under study (STP and GGT) and the gold standard (Immunoglobulin G [IgG] measured with RID) was investigated with Spearman's correlation index R for ranks. Serum total protein concentration and GGT activity were analyzed by receiver operating characteristic (ROC) curve analysis to identify the optimal cut-off point to distinguish between diarrheic calves with or without FTPI, also considering the effects of dehydration and age. The results show that GGT activity was affected by the age of calves, while STP was influenced by dehydration. The cut-offs to distinguish calves with IgG < 10 g/L were < 52 g/L of STP in normohydrated calves, < 58 g/L of STP in dehydrated calves, and < 124 IU/L of GGT in calves with aged between 3 and 10 days. In nondehydrated diarrheic calves, the STP refractometer showed better diagnostic accuracy.In dehydrated calves aged between 3 and 10 days, however, its accuracy drops, and it is advisable to use GGT activity., (© 2023. The Author(s).)

In a turbulent biological tissue, field correlations at the observation plane are found when a multimode optical incidence is used. For different multimode structures, variations of the multimode field correlations are evaluated against the biological tissue turbulence parameters, i.e., the strength coefficient of the refractive-index fluctuations, fractal dimension, characteristic length of heterogeneity, and the small length-scale factor. Using a chosen multimode content, for specific biological tissue types of liver parenchyma (mouse), intestinal epithelium (mouse), upper dermis (human), and deep dermis (mouse), field correlations are evaluated versus the strength coefficient of the refractive-index fluctuations and small length-scale factor. Again, with a chosen multimode content, behavior of the field correlations is studied against the strength coefficient of the refractive-index fluctuations for various diagonal lengths and the transverse coordinate at the observation plane. Finally, the field correlation versus the strength coefficient of the refractive-index fluctuations is reported for different single modes, which are special cases of multimode excitation. This topic is being reported in the literature for the first time, to our knowledge, and the presented results can be employed in many important biological tissue applications.

In this paper, a tapered fiber bioprobe based on Mach-Zehnder interference (MZI) is proposed. To retain the highly sensitive straight-tapered fiber MZI sensing structure, we designed a U-shaped transmission fiber structure for the collection of optical sensing signals to achieve a miniature-insert-probe design. The spectrum responses from the conventional straight-tapered fiber MZI sensor and our proposed sensor were compared and analyzed, and experimental results showed that our proposed sensor not only has the same sensing capability as the straight-tapered fiber sensor, but also has the advantages of being flexible, convenient, and less liquid-consuming, which are attributed to the inserted probe design. The tapered fiber bioprobe obtained a sensitivity of 1611.27 nm/RIU in the refractive index detection range of 1.3326-1.3414. Finally, immunoassays for different concentrations of human immunoglobulin G were achieved with the tapered fiber bioprobe through surface functionalization, and the detection limit was 45 ng/mL. Our tapered fiber bioprobe has the insert-probe advantages of simpleness, convenience, and fast operation. Simultaneously, it is low-cost, highly sensitive, and has a low detection limit, which means it has potential applications in immunoassays and early medical diagnosis.

Background: Attainment of adequate transfer of passive immunity (TPI) is critical to health of calves; however, studies comparing available tools for measurement of TPI in individual beef animals are limited., Objectives: To report agreement between 4 tests evaluating individual TPI status in beef calves., Animals: One hundred ninety-six beef calves born to cows and heifers presenting for calving management or dystocia., Methods: Retrospective study to assess serum immunoglobulin (IgG) concentrations via turbidimetric immunoassay (TI), gamma-glutamyl transferase (GGT), serum total protein (TP), and single radial immunodiffusion (RID; reference standard). Test agreement was evaluated using Passing-Bablok regression, Bland-Altman analysis, Cohen's kappa, and receiver operating characteristic (ROC) curves with and without covariate adjustment to determine optimal thresholds., Results: Correlation between RID and test results varied: TI, ρ = 0.757; TP, ρ = 0.715; GGT: ρ = 0.413. For the TI compared to RID, regression analysis identified a constant (intercept = -0.51 [CI: -2.63, 3.05]) and proportional (slope = 1.87 [CI: 1.69, 2.08]) bias. Based on ROC, TI concentrations of ≤9.89 and ≤13.76 g/L, and TP concentrations of ≤5.5 and ≤6.0 g/dL, indicated IgG concentrations <18.0 and <25.0 g/L, respectively., Conclusions and Clinical Importance: Within this cohort of calves, TI demonstrated the best correlation with RID; however, significant bias was identified which led to frequent underestimation of IgG concentration. Serum total protein demonstrated less correlation with RID but had less misclassification than TI. Both TI and TP demonstrated less correlation for calves that received colostrum replacement prompting clinical awareness of colostrum type when evaluating individual TPI in beef calves., (© 2023 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals LLC on behalf of American College of Veterinary Internal Medicine.)

Background: Colostral immunoglobulin G (IgG) concentration is critical to the attainment of adequate transfer of passive immunity in cattle, however, studies comparing available tools for measurement of colostral IgG concentration in beef cattle are limited., Objectives: To report the agreement between 3 commercially available tests for evaluating IgG concentration in beef colostrum., Animals: Two hundred six beef-breed cows hospitalized for calving management or dystocia., Methods: Retrospective study to assess IgG of whole colostrum measured stall-side via turbidimetric immunoassay (TI) and brix refractometry (BRIX), compared to fat separated (FS) analysis via single radial-immunodiffusion (RID; reference standard), TI-FS and BRIX-FS. Test performance was assessed using Passing Bablock regression, Bland-Altman analysis, and area under the curve to determine optimal thresholds., Results: Correlation between RID and TI-FS, BRIX-FS, or BRIX was similar (Spearman's ρ = 0.717, 0.715, 0.716, respectively) but correlation for TI was poor (ρ = 0.586). Regression analysis identified a substantial constant (-214.75 [CI: -272.03 to -178.07]) and proportional (13.24 [CI: 11.81-15.37]) bias between the RID and TI-FS which was similar for TI. TI-FS concentrations of 28.47, 38.75, and 50.62 g/L, BRIX-FS of ≤21.9%, ≤24.0%, and ≤27.4%, and BRIX of ≤21.3%, ≤23.8%, and ≤26.4% indicated IgG concentrations <50, <100, and <150 g/L, respectively; appropriate cutoffs for TI could not be generated., Conclusions and Clinical Importance: Both TI and TI-FS demonstrated a large constant and proportional bias compared to RID; BRIX and BRIX-FS were well correlated with RID and remain a reliable method for estimation of colostral IgG concentration in beef cattle., (© 2023 The Authors. Journal of Veterinary Internal Medicine published by Wiley Periodicals LLC on behalf of American College of Veterinary Internal Medicine.)

Purpose: To investigate and evaluate the chromatic dispersion of various hydrogel and silicon hydrogel contact lens materials., Methods: Eighteen different soft contact lens materials with high and low water content in lens power of -1.00 DS were measured by one operator at temperature of 20 °C ± 0.5° soaked in ISO standard phosphate-buffered saline (PBS) and in their respective packaging solutions (PS). An analogue Abbe refractometer (Model Zuzi 320, AUXILAB, S.L., Navarra, Spain) was used for refractive index (RI) measurements at 5 different wavelengths. All contact lenses were presented in a random and masked order to the operator. The Bland-Altman method with 95 % limits of agreement (LoA) and coefficient of repeatability (CoR) was used to characterise the repeatability of refractive index measurements. The Abbe numbers for each material were calculated by entering the measured and interpolated refractive indices into the Abbe number equation. One-way ANOVA analysis was used to test if there were significant differences between the 5 different wavelengths (470 nm-680 nm) within each material. An unpaired t-test was used to determine if there were differences in refractive index or dispersion between packaging solution and PBS results., Results: Nelfilcon A (Dailies Aqua Comfort Plus) soaked in PS showed the best repeatability of all 18 examined soft contact lenses across all wavelengths with an average refractive index of 1.3848 for all 6 contact lenses with a standard deviation of 0.00064. The 95 % limits of agreement were between 1.3835 and 1.3860. The mean coefficient of repeatability for nelfilcon A was 0.00125. For contact lenses soaked in ISO Standard PBS comfilcon A (Biofinity) had the best repeatability. The average refractive index of all 6 contact lenses was 1.4041 with a standard deviation of 0.00031 and a coefficient of repeatability of 0.00060. The 95 % limits of agreement were between 1.4035 and 1.4047. The analysis with One-way ANOVA with multiple comparisons involving Holm-Sidak post-hoc, showed that there are significant differences (p < 0.001, F ratio  = 376.2 between wavelengths and F ratio  = 1559 between different refractive indices) in the refractive index of most common lens materials across the visible wavelength range. Based on unpaired t-test, there is no significant difference (p > 0.05) in the Abbe numbers of the tested lens materials whether they have been placed in the packaging solution or in standard PBS (p > 0.05, 95 % CI = -4.8070 to 5.8680, t = 0.2054). The Abbe numbers for the calculated contact lenses soaked in PS ranged between 43.7 and 89.9. For contact lenses stored in PBS the range was between 46.3 and 81.6., Conclusion: There is a good repeatability between repeated RI measurements taken from the same lens and from the same material. The significant differences between the refractive indices across the 5 different wavelengths showed the presence of chromatic dispersion in the 18 evaluated soft contact lens materials. Furthermore, it could be shown that there is no significant difference in dispersion whether the contact lenses are soaked in standard PBS or in their respective packaging solutions. With no other published data available as a reference, absolute accuracy of the calculated Abbe numbers remains to be confirmed, however, this study did confirm that significant chromatic dispersion exists in soft contact lens materials., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.)

Label-free sensing is a promising approach for point-of-care testing devices. Among optical transducers, photonic crystal slabs (PCSs) have positioned themselves as an inexpensive yet versatile platform for label-free biosensing. A spectral resonance shift is observed upon biomolecular binding to the functionalized surface. Commonly, a PCS is read out by a spectrometer. Alternatively, the spectral shift may be translated into an intensity change by tailoring the system response. Intensity-based camera setups (IBCS) are of interest as they mitigate the need for postprocessing, enable spatial sampling, and have moderate hardware requirements. However, they exhibit modest performance compared with spectrometric approaches. Here, we show an increase of the sensitivity and limit of detection (LOD) of an IBCS by employing a sharp-edged cut-off filter to optimize the system response. We report an increase of the LOD from (7.1 ± 1.3) × 10 -4 RIU to (3.2 ± 0.7) × 10 -5 RIU. We discuss the influence of the region of interest (ROI) size on the achievable LOD. We fabricated a biochip by combining a microfluidic and a PCS and demonstrated autonomous transport. We analyzed the performance via refractive index steps and the biosensing ability via diluted glutathione S-transferase (GST) antibodies (1:250). In addition, we illustrate the speed of detection and demonstrate the advantage of the additional spatial information by detecting streptavidin (2.9 µg/mL). Finally, we present the detection of immunoglobulin G (IgG) from whole blood as a possible basis for point-of-care devices., Competing Interests: The authors declare no conflict of interest.

As one of the most well-established biocompatible transition metal nitrides, titanium nitride (TiN) has been widely applied for fiber waveguide coupling device applications. This study proposes a TiN-modified fiber optic interferometer. Benefiting from the unique properties of TiN, including ultrathin nanolayer, high refractive index, and broad-spectrum optical absorption, the refractive index (RI) response of the interferometer is greatly enhanced, which is desired all the time in the field of biosensing. The experimental results show that the deposited TiN nanoparticles (NPs) can enhance the evanescent field excitation and modulate the effective RI difference of the interferometer, which eventually results in the RI response enhancement. Besides, after incorporating the TiN with different concentrations, the resonant wavelength and the RI responses of the interferometer are enhanced to varying degrees. Benefitting from this advantage, the sensing performances, including sensitivity and measurement range, can be flexibly adapted based on different detection requirements. Since RI response can effectively reflect the detection ability of biosensors, the proposed TiN-sensitized fiber optic interferometer can be potentially applied for high-sensitive biosensing applications.

Designing invisibility cloaks has always been one of the most fascinating fields of research; in this regard, metasurface-based carpet cloaks have drawn researchers' attention due to their inherent tenuousness, resulting in a lower loss and easier fabrication. However, their performances are dependent on the incident angle of the coming wave; as a result, designing a carpet cloak capable of rendering objects under it invisible for a wide range of angles requires advanced methods. In this paper, using the Particle Swarm Optimization (PSO) algorithm, along with a trained neural network, a metasurface-based carpet cloak is developed capable to operate for a wide range of incident angles. The deep neural network is trained and used in order to accelerate the process of calculation of reflection phases provided by different unit cell designs. The resultant carpet cloak is numerically analyzed, and its response is presented and discussed. Both near-field and far-field results show that the designed carpet cloak operates very well for all incident angles in the range of 0 to 65 degrees., (© 2023. The Author(s).)

The aim of this study was to evaluate changes in the serum immunoglobulin G (IgG) and serum total protein (STP) concentrations and serum Brix percentages of neonatal Arabian foals during first 3 weeks of life. Blood samples were collected from 12 apparently healthy foals by jugular venipuncture at birth and at 12-hours, 24-hours, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15 and 21 days of age. Serum IgG and STP concentrations and Brix percentages were measured by the radial immunodiffusion assay, and digital STP and Brix refractometers, respectively. Based on the serum IgG concentrations measured at 24 h, two foals were diagnosed with failure of transfer of passive immunity (FTPI). While IgG concentrations were determined using the data of foals with adequate transfer of passive immunity, other calculations were made using the data of all foals. The mean IgG concentration of the foals increased from birth (<200 mg/dl) to 12 (2068.5 mg/dl) and 24 h (2184.7 mg/dl), and progressively decreased up to 21 days of age (1318.5 mg/dl). The serum IgG concentrations at 12 h were highly correlated with each of the IgG concentrations measured over the 21-day period. The serum IgG and STP concentrations and Brix percentages of the foals diagnosed with FTPI at 12 h did not reach the adequate strata over time. These results suggest that foals can be reliably tested for passive immunity status at 12 h after birth., Competing Interests: Conflict of Interest No conflict of interest., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The refractive index points to the interplay between light and objects, which is rarely studied down to micronano scale. Herein, we demonstrated a conventional bright-field imaging technique to determine the local refractive index of single particles combined with a series of refractive index standard solutions. This intrinsic optical property is independent with the particle size and surface roughness with a single chemical component. Furthermore, we accurately tuned refractive index of homemade core-shell nanoparticles by adjusting the ratio of core-to-shell geometry. This simple and effective strategy reveals extensive applications in exploring, designing and optimizing the physical and optical characterizations of composite photonic crystals with high precision. It also indicates potentials in the field of reflective displays, optical identification, and encryption.

Inadequate transfer of passive immunity (ITPI) is major risk for mortality, morbidity and decreased growth performance in dairy and beef calves. Refractometry method is used in estimating ITPI in dairy and beef calves but studies evaluating refractometers for Simmental dairy calves are limited. The objectives of this study were determining the accuracy of digital serum total protein refractometer (STP-REF) and digital Brix refractometer (BRIX-REF) in the estimating of different passive immunity status (<10, <18, <25 and <32 g/L) in Simmental dairy calves. Serum samples were collected from apparently healthy Simmental dairy calves aged 1-8 days (n = 291). Serum total solid percentages were measured using BRIX-REF, serum total protein concentrations were measured using STP-REF and serum IgG concentrations were measured using radial immunodiffusion (RID) assay as a reference test. Correlation coefficients were calculated between RID test and refractometers results, and each other. The diagnostic test performance of the refractometers at IgG concentrations of < 10, < 18, < 25 and < 32 g/L was measured by performing a receiver operating characteristics (ROC) analysis. The optimal thresholds of the refractometers were determined based on Youden's J statistics and after accounting for different costs between false positive and false negative cases using misclassification cost term analysis. The overall test performance and the agreement of the refractometers were assessed using area under the ROC curve and Cohen's kappa analysis. Optimal thresholds were determined as < 7.9, < 8.3, < 8.7, < 9.4% for the BRIX-REF, and < 4.6, < 5.2, < 5.4, < 5.8 g/dL for the STP-REF in estimating IgG concentrations of < 10, < 18, < 25, < 32 g/L, respectively. Se and Sp of BRIX-REF were 88.8% and 89.1% for < 7.9% Brix, 81.6% and 94.2% for < 8.3% Brix, 77.9% and 97.4% for < 8.7% Brix and 81.7% and 91.2% for < 9.4% Brix, respectively. Se and Sp of STP-REF 92.5% and 88.2% for < 4.6 g/dL; 92.1% and 87.1% for < 5.2 g/dL; 81.7% and 93.6% for < 5.4 g/dL; 79.0% and 94.1% for < 5.8 g/dL, respectively. Both, digital Brix and STP refractometers performed well to estimate the status of passive immunity in dairy Simmental calves., Competing Interests: Declarations of interest None., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Although optical wave propagation is investigated based on the absorption and scattering in biological tissues, the turbulence effect can also not be overlooked. Here, the closed-form expressions of the wave structure function (WSF) and phase structure function (PSF) of plane and spherical waves propagating in biological tissue are obtained to help with future research on imaging, intensity, and coherency in turbulent biological tissues. This paper presents the effect of turbulent biological tissue on optical wave propagation to give a perception of the performance of biomedical systems that use optical technologies. The behavior of optical waves in different types of turbulent biological tissues such as a liver parenchyma (mouse), an intestinal epithelium (mouse), a deep dermis (mouse), and an upper dermis (human) are investigated and compared. It is observed that turbulence becomes more effective with an increase in the characteristic length of heterogeneity, propagation distance, and the strength of the refractive index fluctuations. However, an increase in the fractal dimension, wavelength, and small length scale factor has a smaller turbulence effect on the propagating optical wave. We envision that our results may be used to interpret the performance of optical medical systems operating in turbulent biological tissues.

A long period grating Mach-Zehnder interferometer (LPGMZI) that consists of two identical long period gratings (LPGs) in a single fibre was developed to measure immunoglobulin M (IgM). The measured spectrum has fringes due to the interference between the core mode and cladding mode. This immunosensor inherits the advantages of an LPG and has the potential to compensate for unwanted signal changes due to bulk refractive index (RI) and temperature fluctuations by analysing interference fringes and their envelope. The external RI was measured from 1.3384 to 1.3670 in two different cases: (i) only the connecting section between the two LPGs is immersed or (ii) the whole LPGMZI is immersed. The fringes shift with an external RI in both scenarios, whereas the envelope stays still in case (i) or shifts at the same rate as the fringes in case (ii). The LPGMZI was also characterised at different temperatures between 25 °C and 30 °C by placing the whole LPGMZI in a water bath. The fringes and envelope shift at the same rate with temperature. The LPGMZI platform was then used to create an IgM immunosensor. The connecting section between the two LPGs was functionalised with anti-IgM and immersed into solutions with IgM concentrations from 20 μg/mL to 320 μg/mL. The fringes shift with IgM concentration and the envelope remains static. The results from this work show that LPGMZI has the potential to compensate for the temperature and bulk RI fluctuations and perform as a portable biosensor platform.

The laminar flow interface (LFI) developed at low Reynolds numbers is one of the most prominent features of microscale flows and has been employed in a diverse range of optofluidic applications. The formation of LFIs usually requires the manipulation of multiple streams within a microchannel using a complex hydrodynamic pumping system. Herein, we present a new type of LFI that is generated by fluid switching within a three-dimensional (3D) microlens-incorporating microfluidic chip (3D-MIMC). Since Poiseuille flows exhibit a parabolic velocity profile, the LFI is cone-like in shape and acts as a transient refractive interface (TRI), which is sensitive to the refractive index ( RI ) and the Péclet number ( Pe ) of the switching fluids. In response to the TRI, the intensity of the transmitted light can be intensified or attenuated depending on the sequence of fluid switching operations. By incorporating three-dimensional (3D) microlenses and increasing the Pe values, the profile and amplitude of the intensity peak are both significantly improved. The limit of detection (LoD) for a sodium chloride (NaCl) solution at Pe = 1363 is as low as 0.001% (w/w), representing an improvement of 1-2 orders of magnitude when compared to existing optofluidic concentration sensors based on intensity modulation. Fluid switching of a variety of inorganic and organic sample fluids confirms that the specific optical response ( K or ) correlates positively with both Pe and the specific RI ( K nc ), obeying a linear relationship. This model is further verified through cross-validations and used to estimate the molecular diffusion coefficient ( D ) of a range of species. Furthermore, by virtue of the TRI, we achieve a sensitive measurement of optical-equivalent total dissolved solids (OE-TDS) for environmental samples.

Here, we experimentally demonstrate a wedged fiber optic surface plasmon resonance (SPR) sensor enabling high-sensitivity temperature detection. The sensing probe has a geometry with two asymmetrical bevels, with one inclined surface coated with an optically thin film supporting propagating plasmons and the other coated with a reflecting metal film. The angle of incident light can be readily tuned through modifying the beveled angles of the fiber tip, which has a remarkable impact on the refractive index sensitivity of SPR sensors. As a result, we measure a high refractive index sensitivity as large as 8161 nm/RIU in a wide refractive index range of 1.333-1.404 for the optimized sensor. Furthermore, we carry out a temperature-sensitivity measurement by packaging the SPR probe into a capillary filled with n-butanol. This showed a temperature sensitivity reaching up to -3.35 nm/°C in a wide temperature range of 20 °C-100 °C. These experimental results are well in agreement with those obtained from simulations, thus suggesting that our work may be of significance in designing reflective fiber optic SPR sensing probes with modified geometries.

Herein a gold nanosphere (AuNS)-coated wavelength-mode localized surface plasmon resonance (LSPR) fiber sensor was fabricated by a simple and time-saving electrostatic self-assembly method using poly(allylamine hydrochloride). Based on the localized enhanced coupling effect between AuNSs, the LSPR spectrums of the AuNS monolayer with good dispersity and high density exhibited a favourable capability for refractive index (RI) measurement. Based on the results obtained from the optimization for AuNS distribution, sensing length, and RI range, the best RI sensitivity of the fiber modified by 100 nm AuNS reached up to about 2975 nm/RIU, with the surrounding RI range from 1.3322 to 1.3664. Using an 80 nm AuNS-modified fiber sensor, the RI sensitivity of 3953 nm/RIU was achieved, with the RI range increased from 1.3744 to 1.3911. The effect of sensing length to RI sensitivity was proven to be negligible. Furthermore, the linear relationship between the RI sensitivity and plasma resonance frequency of the bulk metal, which was dependent on the interparticle plasmon coupling effect, was quantified. Additionally, the resonance peak was tuned from 539.18 nm to 820.48 nm by different sizes of AuNSs-coated fiber sensors at a RI of 1.3322, which means the spectrum was extended from VIS to NIR. It has enormous potential in hypersensitive biochemistry detection at VIS and NIR ranges.

Most optical characterization methods rely on measuring the complex optical fields emerging from the interaction between light and material systems. Nevertheless, inherent scattering and absorption cause ambiguities in both interferometric and noninterferometric attempts to measure phase. Here we demonstrate that the complete information about a probe optical field can be encoded into the states of polarization, and develop a topography measurement method by blindly varying the ambient refractive index surrounding the sample in a wedged cuvette, which is capable of simultaneously measuring the thickness and the ambient refractive index of the sample in real time, as well as extending the measurement range of the sample thickness. With the method, we have successfully measured the topography of a 136.7 µm thick coverslip by blindly changing the ambient refractive index by 0.001246, resulting in the thickest sample characterization ever achieved by quantitative phase imaging, to the best of our knowledge. An efficient and complete characterization of optical fields is critical for any high-resolution imaging approach and the technique demonstrated here should prove attractive for applications ranging from microscopy to remote sensing. Thanks to the high precision and fast response speed, this method may pave a new way for measuring the topography of the thick samples, such as biological tissues.

In this paper we present a structurally-complex biomimetic scattering structure, fabricated with two-photon polymerization, and utilize this object in order to benchmark a computational imaging system. The phantom allows to tailor the scattering by modifying its degrees of freedom i.e. refractive index contrast and scattering layer dimensions and incorporates a 3D imaging quality test, representing a single cell within tissue. While the sample may be used with multiple 3D microscopy techniques, we demonstrate the impact of scattering on three tomographic phase microscopy (TPM) reconstruction methods. One of these methods assumes the sample to be weak-scattering, while the other two take multiple scattering into account. The study is performed at two wavelengths (visible and near-infrared), which serve as a scaling factor for the scattering phenomenon. We find that changing the wavelength from visible into near-infrared impacts the applicability of TPM reconstruction methods. As a result of reduced scattering in near-infrared region, the multiple-scattering-oriented techniques perform in fact worse than a method aimed for weak-scattering samples. This implies a necessity of selecting proper approach depending on sample's scattering characteristics even in case of subtle changes in the object-light interaction., (© 2022. The Author(s).)

Fiber-optic ball resonators are an attractive technology for refractive index (RI) sensing and optical biosensing, as they have good sensitivity and allow for a rapid and repeatable manufacturing process. An important feature for modern biosensing devices is the multiplexing capacity, which allows for interrogating multiple sensors (potentially, with different functionalization methods) simultaneously, by a single analyzer. In this work, we report a multiplexing method for ball resonators, which is based on a spatial-division multiplexing approach. The method is validated on four ball resonator devices, experimentally evaluating both the cross-talk and the spectral shape influence of one sensor on another. We show that the multiplexing approach is highly efficient and that a sensing network with an arbitrary number of ball resonators can be designed with reasonable penalties for the sensing capabilities. Furthermore, we validate this concept in a four-sensor multiplexing configuration, for the simultaneous detection of two different cancer biomarkers across a widespread range of concentrations.

Fringe pattern based measurement techniques are the state-of-the-art in full-field optical metrology. They are crucial both in macroscale, e.g., fringe projection profilometry, and microscale, e.g., label-free quantitative phase microscopy. Accurate estimation of the local fringe orientation map can significantly facilitate the measurement process in various ways, e.g., fringe filtering (denoising), fringe pattern boundary padding, fringe skeletoning (contouring/following/tracking), local fringe spatial frequency (fringe period) estimation, and fringe pattern phase demodulation. Considering all of that, the accurate, robust, and preferably automatic estimation of local fringe orientation map is of high importance. In this paper we propose a novel numerical solution for local fringe orientation map estimation based on convolutional neural network and deep learning called DeepOrientation. Numerical simulations and experimental results corroborate the effectiveness of the proposed DeepOrientation comparing it with a representative of the classical approach to orientation estimation called combined plane fitting/gradient method. The example proving the effectiveness of DeepOrientation in fringe pattern analysis, which we present in this paper, is the application of DeepOrientation for guiding the phase demodulation process in Hilbert spiral transform. In particular, living HeLa cells quantitative phase imaging outcomes verify the method as an important asset in label-free microscopy.

The interaction between the terahertz wave propagating in free space and the sample is weak, which leads to the weak signal of the sample, which cannot meet the detection needs of trace samples. In order to meet the detection of trace samples, a kind of metamaterial absorber (the basic unit of the absorber is composed of gold-high resistance silicon-aluminum three-layer structure) is designed, and the monolayer graphene is transferred on the surface of the metamaterial absorber to construct the graphene-metamaterial absorber heterostructure. The transmission spectrum of the resonant cavity is simulated and measured by terahertz time domain spectroscopy system, and the obvious resonance frequency shift is observed. The results show that the graphene-metamaterial absorber heterostructure can detect josamycin antibiotic solution with concentration of 0.02 mg/L (the mass of josamycin is 0.2 ng). Compared with using the same structure metamaterial absorber to detect josamycin antibiotics, the sensitivity is increased by an order of magnitude. Using graphene-metamaterial heterostructure to detect the relative change of heterostructure reflectivity caused by josamycin antibiotics can reach 40%. The research in this paper provides a new technical means for accurate and rapid detection in terahertz band., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The objective of this cross-sectional study was to determine the accuracy of the digital Brix and serum total protein (TP) refractometers for estimating different passive immunity status in neonatal foals. In total, 18- to 40-h old purebred Arabian foals (n = 185) were used. Serum TP concentrations, total solid percentages and IgG concentrations were measured with a digital serum TP refractometer, digital Brix refractometer and the gold standard radial immunodiffusion (RID) assay, respectively. Correlation coefficients were calculated between the refractometer and RID assay results. A receiver operating characteristic analysis was used to select the optimal cut-offs for both refractometers. Test performance and agreement were evaluated using diagnostic test characteristics at optimal thresholds and areas under the ROC curve, and by calculating Cohen's kappa coefficient. The sensitivity and specificity of the digital Brix refractometer at optimal cut-offs (≤7.8%, ≤7.9%, ≤8.2%, ≤8.3%, ≤9.0%) were 100 and 69.3%; 100% and 68.5%; 70.5% and 71.0%; 88.3% and 85.5%; 88.1% and 76% to estimate RID-IgG of <400 mg/dL, <800 mg/dL, <1500 mg/dL, <2500 mg/dL and < 3000 mg/dL, respectively. The sensitivity and specificity of the digital serum TP refractometer at optimal cut-off (≤4.6 g/dL, ≤4.6 g/dL, ≤4.8 g/dL, ≤5.0 g/dL, ≤5.4 g/dL) were 100 and 69.3%; 100% and 72.8%; 90% and 72.8%; 72.9% and 83.9%; 84.4% and 88% to estimate RID-IgG of <400 mg/dL, <800 mg/dL, <1500 mg/dL, <2500 mg/dL and < 3000 mg/dL, respectively. In conclusion, the refractometers showed a good potential as screening tools for the estimation of different IgG concentrations in neonatal foals., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Refractive index detection (RID) is attractive because it allows approaching the benefits of universal detection with liquid chromatography, by which ideally standard independent calibration and hence compound independent quantification becomes possible. Nevertheless, the implementation of RID has remained limited as it offers poor detection sensitivity while only being compatible with isocratic mobile phases. The implementation of compositional solvent gradients has remained prohibitively challenging in commercial HPLC-RID systems due to the resulting drastic alterations in refractive index and extreme baseline drift. While the refractive index is also highly dependent on temperature, more leeway appears possible to mitigate the problem, particularly when the used temperature gradients can be limited. Temperature-responsive liquid chromatography (TRLC) allows obtaining isocratic reversed phase type of separations, whereby retention is modulated via temperature changes ∼ 15 °C-20 °C above and below the polymer conversion temperature. Elution profiles, reminiscent of what can be obtained with solvent gradients in conventional RPLC, can then be obtained by enacting downwards temperature gradients on the columns. This work comprises a proof-of-principle to illustrate the possibilities of combining thermal gradient TRLC with RID. The observed baseline drift appeared thereby very minor (<5 nRIU min -1 ), and hence easily controllable. Short chain fatty acids are used as representative compounds to assess this new approach. Overlapping calibration lines are accordingly obtained for all fatty acids between butyric and decanoic acid., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

An optical strain gauge based on a balloon-like interferometer structure formed by a bent standard single-mode fiber combined with a 3D printer piece has been presented and demonstrated, which can be used to measure displacement. The interferometer has a simple and compact size, easy fabrication, low cost, and is repeatable. The sensor is based on the interference between the core and cladding modes. This is caused by the fiber's curvature because when light propagates through the curved balloon-shaped interferometer region, a portion of it will be released from the core limitation and coupled to the cladding. The balloon has an axial displacement as a result of how the artwork was constructed. The sensor head is sandwiched between two cantilevers such that when there is a displacement, the dimension associated with the micro bend is altered. The sensor response as a function of displacement can be determined using wavelength shift or intensity change interrogation techniques. Therefore, this optical strain gauge is a good option for applications where structure displacement needs to be examined. The sensor presents a sensitivity of 55.014 nm for displacement measurements ranging from 0 to 10 mm and a strain sensitivity of 500.13 pm/μϵ.

Here we study the analytical performance of label-free optical biosensors with respect to analyte-induced refractive index changes that can be measured by a biosensor (refractive index resolution). We present an analytical model that interrelates the refractive index resolution and the parameters of the optical platform of a biosensor. We demonstrate that the figure of merit (FOM), which has been widely used to design optical platforms of label-free optical biosensors, is not an appropriate metric to guide the design or predict the performance of label-free optical biosensors. Therefore, we propose an extended definition of FOM that addresses its limitations. We confirm the validity of the proposed approach by both numerical simulations and experiments. Finally, we show that the analytical model of the refractive index resolution not only makes it possible to predict the performance of a biosensor but also provides strategies for achieving optimal performance., (Copyright © 2022 Elsevier B.V. All rights reserved.)

We propose a novel intensity diffraction tomography (IDT) reconstruction algorithm based on the split-step non-paraxial (SSNP) model for recovering the 3D refractive index (RI) distribution of multiple-scattering biological samples. High-quality IDT reconstruction requires high-angle illumination to encode both low- and high- spatial frequency information of the 3D biological sample. We show that our SSNP model can more accurately compute multiple scattering from high-angle illumination compared to paraxial approximation-based multiple-scattering models. We apply this SSNP model to both sequential and multiplexed IDT techniques. We develop a unified reconstruction algorithm for both IDT modalities that is highly computationally efficient and is implemented by a modular automatic differentiation framework. We demonstrate the capability of our reconstruction algorithm on both weakly scattering buccal epithelial cells and strongly scattering live C. elegans worms and live C. elegans embryos.

Chip-scale infrared spectrometers consisting of a microring resonator array (MRA) were developed for volatile organic compound (VOC) detection. The MRA is serially positioned to serve as a wavelength sorting element that enables wavelength demultiplexing. Unlike conventional devices operated by a single microring, our MRA can perform multiwavelength mid-infrared (mid-IR) sensing by routing the resonant wavelength light from a broadband mid-IR source into different sensing channels. Miniaturized spectrometer devices were fabricated on mid-IR transparent silicon-rich silicon nitride (SiN x ) thin films through complementary metal-oxide-semiconductor (CMOS) processes, thus enabling wafer-level manufacturing and packaging. The spectral distribution of the resonance lines and the optimization of the microring structures were designed using finite-difference time-domain (FDTD) modeling and then verified by laser spectrum scanning. Using small microring structures, the spectrum showed a large free spectral range (FSR) of 100 nm and held four spectral channels without crosstalk. Unlike near-infrared microrings using refractive index sensing, our MRA can detect hexane and ethanol vapor pulses by monitoring the intensity variation at their characteristic mid-IR absorption bands, thus providing high specificity. Applying multiwavelength detection, the sensor module can discriminate among various VOC vapors. Hence, our mid-IR MRA could be an essential component to achieve a compact spectroscopic sensing module that has the potential for applications such as remote environmental monitoring and portable health care devices.

Optical fiber Fabry-Perot sensors have long been the focus of researchers in sensing applications because of their unique advantages, including highly effective, simple light path, low cost, compact size, and easy fabrication. Microcantilever-based devices have been extensively explored in chemical and biological fields while the interrogation methods are still a challenge. The optical fiber probe microcantilever sensor is constructed with a microcantilever beam on an optical fiber, which opens the door for highly sensitive, as well as convenient readout. In this review, we summarize a wide variety of optical fiber probe microcantilever sensors based on Fabry-Perot interferometer. The operation principle of the optical fiber probe microcantilever sensor is introduced. The fabrication methods, materials, and sensing applications of an optical fiber probe microcantilever sensor with different structures are discussed in detail. The performances of different kinds of fiber probe microcantilever sensors are compared. We also prospect the possible development direction of optical fiber microcantilever sensors.

A fiber sensor based on a silica capillary in a balloon-like shape for simultaneous measurement of displacement and temperature is proposed and experimentally demonstrated. The sensor is fabricated by splicing a segment of a hollow-core fiber between two single-mode fibers (SMF) and by creating a balloon shape with the capillary at the top-center position. The SMF-capillary-SMF configuration excites an antiresonant (AR) guidance, and the balloon shape enhances the Mach-Zehnder interferometer (MZI). Experimental results show that, for a balloon length of 4.0 cm and a capillary length of 1.2 cm, the AR is insensitive to displacement and its sensitivity to temperature is 14.3 pm/°C, while the MZI has a sensitivity to displacement of 1.68 nm/mm in the range between 0 and 5 mm and a sensitivity to temperature of 28.6 pm/°C, twice the value of the AR. The proposed fiber sensor has only one sensing element in one configuration, which makes it simple to fabricate as well as low cost.

A flexible terahertz (THz) metamaterial biosensor is theoretically and experimentally investigated. The metamaterial unit cell of the periodic structure array was simply composed of three non-overlapping cut wires with different length parameters on a flexible thin-film (parylene-C) to improve sensitivity. The biosensor sample was fabricated using a lithography process and characterized by a THz time-domain spectroscopy (TDS) system. The metamaterial exhibited multi-resonance dips in transmission spectrum at 0.6-2.0 THz, which can self-correct errors in biosensing. Numerical results show that the Q-factor, figure of merit (FOM) and sensitivity can change in dynamic ranges with the geometric parameters (space and width) of three-cut-wire metamaterial. When space distance was 40 µm and other parameters were default, the sensitivity, FOM and Q-factor reached 710 GHz/RIU (Refractive Index Unit), 9, and 20, respectively. Therefore, through proper design and preparation, the metamaterial can be applied to biochemical detection.

A Bragg grating (BG) is a one-dimensional optical device that may reflect a specific wavelength of light while transmitting all others. It is created by the periodic fluctuation of the refractive index in the waveguide (WG). The reflectivity of a BG is specified by the index modulation profile. A Bragg grating is a flexible optical filter that has found broad use in several scientific and industrial domains due to its straightforward construction and distinctive filtering capacity. WG BGs are also widely utilized in sensing applications due to their easy integration and high sensitivity. Sensors that utilize optical signals for sensing have several benefits over conventional sensors that use electric signals to achieve detection, including being lighter, having a strong ability to resist electromagnetic interference, consuming less power, operating over a wider frequency range, performing consistently, operating at a high speed, and experiencing less loss and crosstalk. WG BGs are simple to include in chips and are compatible with complementary metal-oxide-semiconductor (CMOS) manufacturing processes. In this review, WG BG structures based on three major optical platforms including semiconductors, polymers, and plasmonics are discussed for filtering and sensing applications. Based on the desired application and available fabrication facilities, the optical platform is selected, which mainly regulates the device performance and footprint.

The aim of this study was to determine the diagnostic accuracy of digital serum total protein (TP) and digital Brix refractometers in estimating different passive immunity levels (<10, <18, <25 mg/mL) in dairy calves. Blood samples were collected from 260 apparently healthy Holstein calves, aged 2-7 days. Serum IgG concentrations were measured using digital Brix and TP refractometers and the radial immunodiffusion (RID) assay, as the gold standard. Data were analyzed by a receiver operating characteristics (ROC) analysis, the area under the ROC curves (AUC) and Cohen's kappa (κ). Optimal thresholds were determined as < 8.4, < 9.0 and < 9.4% for the digital Brix refractometer, and < 5.0, < 5.4 and < 5.8 g/dL for the serum TP refractometer in estimating IgG concentrations of < 10, < 18, < 25 mg/mL, respectively. The sensitivity (Se) and specificity (Sp) of the Brix refractometer were 96.3% and 88.8% for < 8.4% Brix, 97.0% and 83.4% for < 9.0% Brix, and 85.5% and 77.8% for < 9.4% Brix, respectively. The Se and Sp of the serum TP refractometer were 96.3% and 90.1% for < 5.0 g/dL, 91.0% and 89.6% for < 5.4 g/dL, 79.6% and 85.2% for < 5.8 g/dL, respectively. The discriminant ability of the refractometers was moderately accurate in estimating IgG concentrations of < 10 and < 18 mg/mL, and highly accurate in estimating IgG concentrations of < 25 mg/mL. Both refractometers substantially agreed with RID-IgG results and almost perfectly agreed with each other. In conclusion, the digital Brix and digital serum TP refractometers offer a good utility for determining different passive immunity levels in dairy calves., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A time-integration imaging polarimeter with continuous rotating retarder is presented, and its full-Stokes retrieving and configuration optimization are also demonstrated. The mathematical expression between the full-Stokes vector and the time-integration light intensities is derived. As a result, the state of polarization of incident light can be retrieved by only one matrix calculation. However, the modulation matrix deviates from the initial well-conditioned status due to time integration. Thus, we re-optimize the nominal angles for the special retardance of 132° and 90° with an exposure angle of 30°, which results in a reduction of 31.8% and 16.8% of condition numbers comparing to the original configuration, respectively. We also give global optimization results under different exposure angles and retardance of retarder; as a result, the 137.7° of retardance achieves a minimal condition number of 2.0, which indicates a well-conditioned polarimeter configuration. Besides, the frame-by-frame algorithm ensures the dynamic performance of the presented polarimeter. For a general brushless DC motor with a rotating speed of over 2000 rounds per minute, the speed of polarization imaging will achieve up to 270 frames per second. High precision and excellent dynamic performance, together with features of compactness, simplicity, and low cost, may give this traditional imaging polarimeter new life and attractive prospects.

Citrate salts (CSs), as one type of organic salts, have been widely used in the food and pharmaceutical industries. Accurate and quantitative detection of CSs in food and medicine is very important for health and safety. In this study, an asymmetric double-opening ring metamaterial sensor is designed, fabricated, and used to detect citrate salts combined with THz spectroscopy. Factors that influence the sensitivity of the metamaterial sensor including the opening positions and the arrangement of the metal opening ring unit, the refraction index and the thickness of the analyte deposited on the metamaterial sensor were analyzed and discussed from electromagnetic simulations and THz spectroscopy measurements. Based on the high sensitivity of the metamaterial sensor to the refractive index of the analyte, six different citrate salt solutions with low concentrations were well identified. Therefore, THz spectroscopy combined with a metamaterials sensor can provide a new, rapid, and accurate detection of citrate salts.