Search

We have developed a new double-pass optical beam deflection instrument for the measurement of diffusion, thermodiffusion and Soret coefficients in liquid mixtures. The increased sensitivity of the instrument results from a second passage of the readout laser beam through the Soret cell containing the sample. An elegant description of the total beam deflection is achieved by means of a transfer matrix formalism. The higher sensitivity allows for a reduction of the length of the detection arm and a compact and stiff design of the instrument. The performance of the new apparatus is demonstrated by its application to polymer analysis for the determination of the molar mass distribution of the polymer from the distribution of diffusion rates by means of the CONTIN algorithm. [ABSTRACT FROM AUTHOR]

Particleboard, engineered wood products as part of a large family of wood composite materials, developed in use mainly in the 1950s and 1960s to utilize inferior wood and wood waste when good-quality wood was in short supply; the annual production capacity worldwide is over 100 million m3. It is also necessary to have a lot of wood raw material for its production, although raw material resources are limited on our planet. In addition to the main wood species, it is therefore possible to think about the wider use of alternative, lesser-known European species of alder, larch, and birch in particleboard production. These three wood species represent an eco-friendly and sustainable wood alternative to the conventional wood raw materials used. This review confirms the diversity of the use of these three species in different fields and proves their suitability in relation to particleboard production. Fundamental research is ongoing in certain universities to determine the proportional shares of use of these tree species in particleboard (in a certain weight proportion in their core layers) for the purpose of formulating the correct technology shares and rules for their application in the wood-based panel industry. [ABSTRACT FROM AUTHOR]

Phenol-formaldehyde (PF) resin is one of the most well-known adhesives for exterior use. PF adhesive is one of the commercial thermoset polymers that is used extensively due to its many benefits. This study investigated the influence of different types and levels of catalysts, i.e., NaOH and CaCO3 at 1% and 5% based on the solids content of PF resin on the adhesive properties, adhesion, and cohesion strength of PF resin. The results show that the catalyst type significantly influenced the PF adhesive viscosity and pH. Furthermore, the catalyst level significantly affected the PF adhesive's solids content, viscosity, and gelation time. The cohesion strength of PF-CaCO3-1% was more significant than the PF control at 75 °C. According to the DMA analysis, the mixed PF-NaOH-5% provided the highest storage modulus, followed by the PF-CaCO3-1%, with values that were not statistically different from one another. The adhesion strength of PF-CaCO3-1% was the highest, whereas the adhesion strength of the PF control was the lowest, as confirmed by the cohesion strength. According to the findings, adding CaCO3-1% as a catalyst of PF resin would result in better adhesive adhesion and cohesion properties for wood composites in the future. [ABSTRACT FROM AUTHOR]

Composite wood materials, also known as engineered wood products, are fabricated from wood veneer, particles, strands, flakes, or fibers that are bonded together with synthetic or renewable, biobased adhesive systems and designed to meet a wide range of structural and non-structural applications [[1], [3]]. However, one of the major drawbacks of wood and wood-based composites is their high flammability [[30]], which has restricted their use as construction and building materials. Handbook of Wood Chemistry and Wood Composites; CRC Press: Boca Raton, FL, USA. [Extracted from the article]

Traditional wood-based panels are produced with synthetic, formaldehyde-based adhesives, commonly made from fossil-derived constituents, such as urea, phenol, melamine, etc. Along with their numerous advantages, such as chemical versatility, high reactivity and excellent adhesive performance, these adhesives are characterized by certain problems, connected with the hazardous volatile organic compounds (VOCs), mostly free formaldehyde in the adhesives and the formaldehyde emission from the finished wood composites, which is carcinogenic to humans and harmful to the environment. The growing environmental concerns and stringent legislative requirements to the formaldehyde emission from wood-based panels have posed new challenges to researchers and industrial practice, related to the development of sustainable, eco-friendly wood-based panels with close-to-zero formaldehyde emission. The most common methods to reduce the formaldehyde emission from wood-based panels have been to decrease the free formaldehyde in the adhesive by modifying the adhesive (like lowering the molar ratio of formaldehyde to urea in UF resin) or by using formaldehyde scavengers, one group of scavengers being for adhesives by mixing or reacting and the second one scavengers for wood-based panels as post-treatments. Another way is to use alternative bio-based adhesives, however, there are still substantial challenges for the complete replacement of formaldehyde-based adhesives with bio-based adhesives, mainly because of their relatively low bonding strength, poor water resistance, etc. This article presents a review and analysis of the current state of research in the field of low formaldehyde emission wood adhesives and formaldehyde scavengers for manufacturing low-toxic, eco-friendly wood composites. [ABSTRACT FROM AUTHOR]

Bamboo is suitable to be a material for the production of new products that can be used indoors and outdoors. Five-, seven- and nine-ply laminated woven bamboo mat boards from semantan bamboo, Gigantochloa scortechinii, were fabricated in this study. G. scortechinii has been used commercially in a structural application and is easily available in Malaysia. The present work investigated the physico-mechanical properties and flammability of the laminated bamboo mat boards as a function of the number of ply. Phenol-formaldehyde resin was used as a binder. The panels' density, physical, mechanical properties, formaldehyde emission and flammability were evaluated. As the number of ply increased, the density of the laminated boards decreased. Similarly, the highest modulus of elasticity was found in 5-ply laminated boards. However, the lowest modulus of rupture was also measured in 5-ply laminated boards. Regarding shear strength, 5-ply and 7-ply laminated boards outperformed 9-ply laminated boards. Meanwhile, 7-ply laminated boards exhibited the highest dimensional stability, as evidenced by the lowest water absorption and thickness swelling. In terms of flammability, all composites are classified as V-0 because the burning stops within 10 s and no flaming drips are observed. [ABSTRACT FROM AUTHOR]