Search

BACKGROUND: Air classification was used to fractionate canola meal (CM). The effect of combinations of air classification conditions, including rotor speed ranging from 300 to 1200 rpm, air stream rate from 700 to 860 cfpm, and secondary air from 0 to 30%, on particle size and nutritive composition was investigated. Response surface methodology was used to develop response surface equations to estimate these effects. RESULTS: Protein concentration increased in almost all the fine fractions. Effects of both secondary air and rotor speed of the air classifier were significant at P ≤ 0.1 and P ≤ 0.01, respectively. Almost all the fine fractions contained more oil. Rotor speed, air stream rate, and their interaction were significant at P ≤ 0.01. Both acid detergent fiber (ADF) and neutral detergent fiber (NDF) were shifted to the coarse fractions during the air classification. The rotor speed was significant for both ADF and NDF at P ≤ 0.01. CONCLUSIONS: Protein shifted to the fine fractions. The highest protein concentration in the fine CM fraction was estimated to be 404.2 g kg−1, demonstrating an enhancement of 10.7%. ADF and NDF shifted to the coarse CM fractions and were respectively estimated to be 294.8 and 332 g kg−1, which were increased by 52.7% and 43.7%. Oil shifted to the fine fractions. The highest concentration was predicted to be 59.7 g kg−1, increased by 45.6%. Fine or coarse fraction yields were estimated to be 35–50%, indicating that they are acceptable for an industrial manufacture. © 2019 Society of Chemical Industry [ABSTRACT FROM AUTHOR]

Highlights • Pea flours were separated by dry fractionation at cut-point of 22 µm. • Industrial scale milling machine and air classifier were applied. • Fine fraction contains double amount of nutrients, like protein, oil, and fiber. • Yield of fine fraction was ∼44%, a high possibility for an industrial manufacture. • Starch was enriched 1.5 times in coarse fraction, a potential in fermentation use. Abstract This study determined influence of industrial scale milling and air classification on separation of pea flours into fine and coarse fractions. Three commercial field pea flours were chosen from field peas grown in Manitoba, Canada, - whole green pea flour (WGPF), split green pea flour (SGPF), and organic split yellow pea flour (OSYPF). The ranges of 85–87% protein, 74–95% fat, and 66–76% minerals were enriched in the pea fine fractions. A range of 78–91% starch was enriched in the coarse fractions. Scanning electron microscopy and proximate analysis confirmed compositional shift between the fine and coarse fractions. The particle size analysis demonstrated that the milling in this study was sufficient and effective in reducing the flour particle size to smaller than 22 µm, which was considered to be the cut-point. The yield of the fine fraction was as high as 44% and acceptable for an industrial manufacture. [ABSTRACT FROM AUTHOR]

Black beans (Phaseolus vulgaris L.) are a rich source of flavonoids and saponins with proven health benefits. Spray dried black bean extract powders were used in different formulations for the production of nutraceutical capsules with reduced batch-to-batch weight variability. Factorial designs were used to find an adequate maltodextrin-extract ratio for the spray-drying process to produce black bean extract powders. Several flowability properties were used to determine composite flow index of produced powders. Powder containing 6% maltodextrin had the highest yield (78.6%) and the best recovery of flavonoids and saponins (>56% and >73%, respectively). The new complexes formed by the interaction of black bean powder with maltodextrin, microcrystalline cellulose 50 and starch exhibited not only bigger particles, but also a rougher structure than using only maltodextrin and starch as excipients. A drying process prior to capsule production improved powder flowability, increasing capsule weight and reducing variability. The formulation containing 25.0% of maltodextrin, 24.1% of microcrystalline cellulose 50, 50% of starch and 0.9% of magnesium stearate produced capsules with less than 2.5% weight variability. The spray drying technique is a feasible technique to produce good flow extract powders containing valuable phytochemicals and low cost excipients to reduce the end-product variability. [ABSTRACT FROM AUTHOR]

Canola Council of Canada, Winnipeg, Manitoba, Canada The rising costs of nonrenewable feedstocks and environmental concerns with their industrial usage have encouraged the study and development of renewable products, including thermoplastic starch (TPS). Starch is an abundant, plant-based biodegradable material with interesting physicochemical characteristics that can be exploited, and this has received attention for development of TPS products. Starch exhibits usable thermoplastic properties when plasticizers, elevated temperatures, and shear are present. The choice of plasticizer has an effect on TPS, even when these have similar plasticization principles. Most TPS have glass transition temperature, Tg, in the range of approximately -75 to 10°C. Glassy transition of TPS is detected by differential scanning calorimeter (DSC) and thermodynamic analyzer (DMA), although DMA has been found to be more sensitive and effective. TPS has low tensile properties, typically below 6 MPa in tensile strength (TS). The addition of synthetic polymers, nanoclay, and fiber can improve TS and water-resistance ability. The moisture sorption behavior of TPS is described in GAB and BET models, from which monolayer moisture content and specific area are derived. Current studies on surface tension, gas permeability, crystallinity, and so on of the TPS are also reviewed. [ABSTRACT FROM AUTHOR]

Canola Council of Canada, Winnipeg, Manitoba, Canada The rising costs of nonrenewable feedstocks and environmental concerns with their industrial usage have encouraged the study and development of renewable products, including thermoplastic starch (TPS). Starch is an abundant, plant-based biodegradable material with interesting physicochemical characteristics that can be exploited, and this has received attention for development of TPS products. Starch exhibits usable thermoplastic properties when plasticizers, elevated temperatures, and shear are present. The choice of plasticizer has an effect on TPS, even when these have similar plasticization principles. Most TPS have glass transition temperature, Tg, in the range of approximately −75 to 10°C. Glassy transition of TPS is detected by differential scanning calorimeter (DSC) and thermodynamic analyzer (DMA), although DMA has been found to be more sensitive and effective. TPS has low tensile properties, typically below 6 MPa in tensile strength (TS). The addition of synthetic polymers, nanoclay, and fiber can improve TS and water-resistance ability. The moisture sorption behavior of TPS is described in GAB and BET models, from which monolayer moisture content and specific area are derived. Current studies on surface tension, gas permeability, crystallinity, and so on of the TPS are also reviewed. [ABSTRACT FROM AUTHOR]

Canola (Brassica napusL.,B. rapaL. andB. junceaL.) produces one of the vegetable oils most beneficial for human health. Consequently, canola is a valuable crop for Canada. The canola industry in Canada is estimated at an annual average value of C$15.4 billion between 2007–08 and 2009–10. Farm cash receipts of canola were valued at C$8.9 billion in 2012. The value of this crop is now threatened by clubroot disease caused byPlasmodiophora brassicae(Woronin.), which has expanded dramatically since its discovery on canola in Alberta in 2003. Since this pathogen moves with infested soil from field to field, control can be very costly to farmers. Even with new control options such as pathogen resistance, the proactive management of clubroot will represent a challenge to the canola industry. Continued research into pathogen control is a necessity for the sustained success of the Canadian canola industry. [ABSTRACT FROM PUBLISHER]

The article discusses a study which shows the effects of spray drying and excipients on the chemical and physical properties of nutraceutical capsules with phytochemicals derived from black beans. The study uses flowability parameters, experimental matrix design, and Carr's compressibility indexes (CI) to determine the black bean properties. The study reveals the correlations between weight variability and composite flow index (CFI) of nutraceutical capsules.

Interest increased recently in manufacturing food packaging, such as films and coatings, from protein-based biopolymers. Among various protein sources, canola protein is a novel source for manufacturing polymer films. It can be concentrated or isolated by aqueous extraction technology followed by protein precipitation. Using this procedure, it was claimed that more than 99% of protein was extracted from the defatted canola meal, and protein recovery was 87.5%. Canola protein exhibits thermoplastic properties when plasticizers are present, including water, glycerol, polyethylene glycol, and sorbitol. Addition of these plasticizers allows the canola protein to undergo glass transition and facilitates deformation and processability. Normally, canola protein-based bioplastics showed low mechanical properties, which had tensile strength (TS) of 1.19 to 4.31 MPa. So, various factors were explored to improve it, including blending with synthetic polymers, modifying protein functionality through controlled denaturation, and adding cross-linking agents. Canola protein-based bioplastics were reported to have glass transition temperature,Tg, below −50°C but it highly depends on the plasticizer content. Canola protein-based bioplastics have demonstrated comparable mechanical and moisture barrier properties compared with other plant protein-based bioplastics. They have great potential in food packaging applications, including their use as wraps, sacks, sachets, or pouches. [ABSTRACT FROM PUBLISHER]

Abstract: Dietary energy restriction (ER) offers certain health benefits, particularly when ER is controlled through manipulation of dietary fats. Our hypothesis is that cellular immunity is modulated by dietary ER. Furthermore, we believe that the immune response may differ between spleen and colon because their lymphatic and vascular organization is different. The objective of the study was to test this hypothesis by determining the effects of dietary ER through manipulation of energy intake from high-fat (HF) diets on the expression and frequency of the CD4+ (T-helper/T-inducer) and CD8+ (T-cytotoxic/T-suppressor) cells, CD45RA (B-cell–specific marker), and immunoglobulins (Ig) A-, G-, and M-bearing cells in spleen and colon in rats by immunohistochemical method. Rats fed the HF diet had a significantly (P < .05) reduced number of immune cells as compared with those fed ER diets. Energy-restricted diet–fed rats showed higher (P < .05) numbers of CD4+, CD8+, IgA, IgM, IgG, and CD45RA cells in spleen and CD4+, IgA, and CD45RA cells in colonic lamina propria. The IgA-containing cells were markedly higher in the colon compared with the spleen. No change occurred in the number of IgM- and IgG-containing cells in colonic tissues between groups, except for the 20% ER group where IgM-labeled cells were higher (P < .05) compared with HF and 40% ER groups. These findings suggest that ER may modulate adaptive immune function and that CD4+ and IgA cells may serve as biological indicators for dietary energy-modulated immunoresponse in spleen and colon, respectively. [Copyright &y& Elsevier]

Samples of canola meal (CM), a by-product of canola oil extraction, with different particle sizes and canola protein (CP) content were obtained by ball milling followed by air classification. In an effort to produce highly deformable "green" biodegradable materials, these CM samples were used to prepare CM bioplastics and their mechanical properties were characterized and compared. It was found that greater CP content led to an increase in elongation at break and a decrease in tensile strength; however, particle size of CM had no apparent impact on the tensile properties. Considering its high mechanical properties and miscibility with the CM matrix, cellulose fiber (CF) was added to the composite formulation to fabricate samples with enhanced tensile strength. The effects of fiber loading on mechanical and thermal properties were characterized using tensile testing and dynamic mechanical analysis. Marked improvements in tensile strength and modulus were found with increasing fiber content above 5 wt%, while mechanical properties were constant between fiber contents of 1-5 wt% because of the inefficient packing of the CF, indicating that the fiber content of 5 wt% is a percolation threshold to increase the mechanical property of the CM composite. The DMA results illustrate that the addition of fiber produced an increase in storage modulus and decreased damping factors for the composites with > 5 wt% CF, reflecting strong interfacial adhesion between CM and CF which resulted in a decrease in chain mobility. [ABSTRACT FROM AUTHOR]

Canola meal (CM), a by-product of canola oil extraction, was modified by poly (styrene-co-glycidyl methacrylate) (PSG) and could potentially be used as a sustainable natural composite. Infrared analysis indicated that PSG could efficiently react with the proteins in CM and become covalently bonded. DSC results revealed that the modified CM composites showed new glass transition temperatures ( T g ) decreasing with the introduction of PSG, which were attributed to the disruption of intermolecular association. Torque curves and melt flow index tests showed the flow property of the modified CM composites increased due to interference by PSG of the hydrogen and disulfide bonding among the protein species. DMA results showed greater amorphous character for the modified CM composites and new glassy plateaus with increased storage moduli, indicating a change in molecular structure and enhancement in mechanical property and usability below T g . Furthermore, the thermostability, the tensile strength, and the elastic moduli of the modified CM composites increased because of the formation of cross-linked proteins in the CM composites, which will potentially increase the application value in some fields, such as single-use agricultural planting containers replacing high-impact polystyrene (HIPS) containers, and food or coffee trays. [ABSTRACT FROM AUTHOR]

To increase the usage value of canola meal (CM), a by-product of canola oil extraction, poly (styrene- co -maleic anhydride-co-glycidyl methacrylate) (PSMG) was prepared and used as a novel chain extender to modify CM. FTIR tests showed that cross-linking took place in the CM matrix and PSMG was covalent bonded with canola proteins; furthermore, the surface of fibers present in the CM composite was covered by proteins, attributed to the reactivity of anhydride groups on PSMG. The modified CM composites showed more apparent amorphous characteristic with the addition of PSMG, according to DSC results. DMA results suggested that cross-linked proteins could be further coupled by glycerol reacting with the anhydride groups remaining in the cross-linked proteins, and thus the storage moduli and the glass transition temperature ( T g ) of the modified CM composites increased with the addition of more PSMG. The reactions of proteins with proteins, proteins with fibers, and proteins with glycerol were further confirmed by TGA. SEM images showed that the CM matrix became much denser and the interfacial adhesion between fibers and the CM matrix was increased by the chemical modification, which also contributed to an increase in the tensile strength of the modified CM composites. [ABSTRACT FROM AUTHOR]

Two branched canola protein isolates (CPI) with different branching degree were prepared using bis-epoxide as a chain extender. It was found that the branching reaction may take place in any protein fraction in native CPI; furthermore, by increasing the amount of chain extender, more native protein chains in CPI were coupled to form branches. In the study of flow properties of native and branched CPI solutions, it was found that the apparent viscosities of two branched CPI remarkably increased compared to that of native CPI over all concentrations tested. At 22 °C and pH 7, native CPI solution showed slight shear thinning behavior with the increase of shear rate; however, shear thickening was observed at low shear rate for branched CPI. Furthermore, shear thickening was more pronounced with the increase of branching degree and concentration of branched CPI solution. Shear thinning behavior of native CPI became marked at pH 11; however, the shear thickening property of branched sample was weakened at high pH. The novel findings in flow properties of the branched CPI solution could be potentially applied in the food industry, such as increasing foaming property and gelling ability of food products. [ABSTRACT FROM AUTHOR]

Resistant starch (RS) has been well characterized for its glycemic control properties; however, there is little consensus regarding the influence of RS on blood lipid concentrations and lipoprotein distribution and size. Therefore, this study aimed to characterize the effect of daily RS supplementation in a controlled capsule delivery on biomarkers of cardiovascular (blood lipids, lipoproteins) and diabetes (glucose, insulin) risk in a pig model. Twelve 8-week-old male Yorkshire pigs were placed on a synthetic Western diet and randomly divided into two groups (n = 6/group) for 30 days: (1) a placebo group supplemented with capsules containing unmodified pre-gelatinized potato starch (0 g/RS/day); and (2) an RS group supplemented with capsules containing resistant potato starch (10 g/RS/day). Serum lipids including total-cholesterol (C), low-density lipoprotein cholesterol (LDL-C), high-density lipoprotein cholesterol (HDL-C), and triglycerides did not differ (p > 0.05) between the RS and placebo groups. Although the total numbers of very low-density lipoprotein (VLDL) and low-density lipoprotein (LDL) particles were similar (p > 0.05) between the two groups, total high-density lipoprotein (HDL) particles were higher (+28%, p < 0.05) in the RS group compared with placebo, resulting from an increase (p < 0.05) in the small HDL subclass particles (+32%). Compared with the placebo group, RS supplementation lowered (p < 0.05) fasting serum glucose (−20%) and improved (p < 0.05) insulin resistance as estimated by Homeostatic Model Assessment-Insulin Resistance (HOMA-IR) without a change in insulin. Additionally, total serum glucagon-like-peptide 1 (GLP-1) was higher (+141%, p < 0.05) following RS supplementation compared with placebo. This data suggests that in addition to the more well-characterized effect of RS intake in lowering blood glucose and improving insulin sensitivity, the consumption of RS may be beneficial in lipid management strategies by enhancing total HDL particle number. [ABSTRACT FROM AUTHOR]

Cross-linked canola protein isolate (CPI) films were prepared using a bisepoxide as a chain extender by wet cast followed by heat compression. By DSC measurements, it was verified that the cross-linking reaction took place in the CPI matrix and was completed in 10 min at 90 °C. FTIR analysis confirmed that the chain extenders were covalently bonded with CPI chains. The reaction led to the formation of a cross-linked architecture which was revealed by an increase in molecular weight of the modified CPI films. The newly formed chain architecture increased the thermostability of CPI as evaluated by TGA; furthermore, the thermostability increased with the increase in cross-linking degree of the modified CPI films. DMA results of the unmodified CPI film showed that microcosmic phase separation occurred between two major proteins, cruciferin and napin in CPI; however, the extent of phase separation decreased with the increase of chain extenders and finally disappeared because of the increased compatibility between cruciferin and napin. Elastomeric mechanical behavior was observed with the introduction of cross-linked architecture in the modified CPI films. At low humidity of 55%, the cross-linked CPI films showed an increase in tensile strength and a decrease in elongation at break. At high humidity of 98%, the increase in hydrophobicity of cross-linked CPI matrix resisted the decreasing tensile strength seen in unmodified films. [ABSTRACT FROM AUTHOR]

A water resistant surface was first obtained by immobilizing hydrophobic copolymers, poly (styrene- co -glycidyl methacrylate) (PSG), with functional groups on soy protein isolate (SPI) films. XPS and AFM results showed that PSG copolymers were immobilized on the film by chemical bonding, and formed a rough surface with some bumps because of the segregation of two different phases on PSG copolymers. Water resistance of the modified films could be adjusted dramatically by further immobilizing different amounts of guanidine-based antimicrobial polymers, poly (hexamethylene guanidine hydrochloride) (PHMG) on the resulting hydrophobic surface. The introduction of hydrophilic PHMG on the resulting surface generated many micropores, which potentially increased the water uptake of the modified films. Furthermore, the modified SPI films showed higher thermostability compared to native SPI film and broad-spectrum antimicrobial activity by contact killing, attributed to the presence of PHMG on the surface. The modified SPI film with a multi-functional surface showed potential for applications in the packaging and medical fields. [ABSTRACT FROM AUTHOR]

Background: Given the highly debated role of dairy food consumption in modulating biomarkers of metabolic syndrome, this study was conducted to examine the influence of long-term (6 month) dairy consumption on metabolic parameters in healthy volunteers under free-living conditions without energy restriction. Methods: Twenty-three healthy subjects completed a randomized, crossover trial of 12 months. Participants consumed their habitual diets and were randomly assigned to one of two treatment groups: a high dairy supplemented group instructed to consume 4 servings of dairy per day (HD); or a low dairy supplemented group limited to no more than 2 servings of dairy per day (LD). Baseline, midpoint, and endpoint metabolic responses were examined. Results: Endpoint measurements of body weight and composition, energy expenditure, blood pressure, blood glucose, and blood lipid and lipoprotein responses did not differ (p > 0.05) between the LD and HD groups. HD consumption improved (p < 0.05) plasma insulin (-9%) and insulin resistance (-11%, p = 0.03) as estimated by HOMA-IR compared with the LD group. Conclusions: Study results suggest that high dairy consumption (4 servings/d) may improve insulin resistance without negatively impacting bodyweight or lipid status under free-living conditions. [ABSTRACT FROM AUTHOR]

It is increasingly clear that North Americans prefer dietary approaches to enhance health in favour of pharmaceutical approaches. Although the incorporation of phytosterols (PS) into various food matrices has been effective in lowering cholesterol, the lipid-lowering potential of PS-enriched soymilk has not been investigated. Therefore, the objective of this study was to examine the lipid-lowering efficacy of a PS-enriched soymilk beverage in comparison to a 1% dairy milk control. Twenty-three hypercholesterolemic subjects consumed 3 tetrapacks per day of a PS-enriched soy beverage (1.95g PS/d) or a 1% dairy milk control. The study was conducted as a 28 d controlled dietary intervention according to a two-period cross-over design. Total cholesterol was reduced by 12% (P< 0.0001) in the PS-enriched soymilk group (5.59±0.27 mmol/L) in comparison to the milk control (6.28±0.27 mmol/L). PS-enriched soymilk consumption did not affect HDL cholesterol concentrations but did reduce (P<0.0001) LDL cholesterol by 16% compared to the control group (3.60 vs. 4.20 mmol/L). Plasma triglyceride concentration was reduced (P =0.02) by 9.4% in response to the PS-enriched soy beverage in comparison to the milk control. We conclude that consumption of a PS-enriched soy beverage is an effective dietary strategy to reduce circulating lipid levels in hypercholesterolemic individuals. Supported by WhiteWave Foods Company. [ABSTRACT FROM AUTHOR]

Background: Given the highly debated role of dairy food consumption in modulating biomarkers of metabolic syndrome, this study was conducted to examine the influence of long-term (6 month) dairy consumption on metabolic parameters in healthy volunteers under free-living conditions without energy restriction.Methods: Twenty-three healthy subjects completed a randomized, crossover trial of 12 months. Participants consumed their habitual diets and were randomly assigned to one of two treatment groups: a high dairy supplemented group instructed to consume 4 servings of dairy per day (HD); or a low dairy supplemented group limited to no more than 2 servings of dairy per day (LD). Baseline, midpoint, and endpoint metabolic responses were examined.Results: Endpoint measurements of body weight and composition, energy expenditure, blood pressure, blood glucose, and blood lipid and lipoprotein responses did not differ (p > 0.05) between the LD and HD groups. HD consumption improved (p < 0.05) plasma insulin (-9%) and insulin resistance (-11%, p = 0.03) as estimated by HOMA-IR compared with the LD group.Conclusions: Study results suggest that high dairy consumption (4 servings/d) may improve insulin resistance without negatively impacting bodyweight or lipid status under free-living conditions.Trial Registration: Clinical Trials.gov: NCT01761955. [ABSTRACT FROM AUTHOR]