Search

In this work, bismuth sulfide (Bi2S3) thin films were deposited by a chemical bath deposition (CBD) technique (called soft chemistry), while titanium dioxide (TiO2) nanoparticles were synthesized by sol–gel and zinc oxide (ZnO) nanoparticles were extracted from alkaline batteries. The resulting nanoparticles were then deposited on the Bi2S3 thin films by spin coating at 1000 rpm for 60 s each layer to create heterojunctions of Bi2S3/ZnO and Bi2S3/TiO2. These materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). The optical and contact angle analyses were undertaken by UV–Vis spectroscopy and a contact microscopy angle meter, respectively. The calculated band gap values were found to be between 1.9 eV and 2.45 eV. The Bi2S3 presented an orthorhombic structure, the TiO2 nanoparticles presented an anatase structure, and the ZnO nanoparticles presented a wurtzite hexagonal crystal structure. Furthermore, heterogeneous solar photocatalysis was performed using the Bi2S3, Bi2S3/ZnO, and Bi2S3/TiO2 thin film combinations, which resulted in the degradation of Congo red increasing from 8.89% to 30.80% after a 30 min exposure to sunlight. [ABSTRACT FROM AUTHOR]

Nowadays, different industries, such as the aerospace and biomedical industries, prefer using Ti alloys due to their excellent anti-corrosion properties and ability to generate a TiO2 oxide layer; this induces the use of anodization to increase the useful life of components. The aim of this work is to characterize the electrochemical effect of anodizing treatment on titanium alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V, and Ti Beta-C) in NaOH and KOH at 1 M, applying a current density of 0.0025 A/cm2. The electrochemical techniques employed were electrochemical noise (EN) and electrochemical impedance spectroscopy (EIS), supported by ASTM G199 and ASTM G106 in electrolytes of NaCl and H2SO4 at 3.5 wt. % as a simulation of marine and industrial atmospheres. Also, the anodized transversal section and surface morphology were characterized by a scanning electron microscope (SEM). The results of both electrochemical techniques indicated that Ti-6Al-2Sn-4Zr-2Mo anodized in NaOH presented the best properties against corrosion, and the thickness of the oxide was the biggest. [ABSTRACT FROM AUTHOR]

Low density polyethylene (LDPE) and polystyrene (PS) samples were functionalized with oregano's essential oil (OEO) for possible antimicrobial packing applications. Different concentrations of OEO were used (0.5-1.5% v/v). Polymers were UV light irradiated during 60 min to improve the OEO adhesion through the polar groups (COOH, OH or COO-) generation on their surface. The effect of OEO different concentration on their antimicrobial activity, mechanical properties and cytotoxicity of the functionalized polymers were analyzed. All functionalized samples showed antimicrobial activity against Gram positive and Gram negative bacteria and this activity increased with OEO concentration. The addition of OEO did not affect the LDPE mechanical properties. The flexural properties of PS were affected by the OEO highest concentration. A cytotoxic effect was found in samples with 1.0% and 1.5% v/v OEO concentrations. [ABSTRACT FROM AUTHOR]