Search

Background: This photoelastic analysis evaluated stress distribution in different osteosynthesis systems, conventional and locking, used for treatment of mandibular angle fractures with a single plate., Material and Methods: Angle fractures were simulated in mandibles made of photoelastic resin. Following Champy's method, plate osteosynthesis was performed. The samples were divided into five groups: Group 1, non-fractured mandible; Group 2, two screws were installed in each segment using a conventional system; Group 3, two screws were installed in each segment using a locking system; Group 4, three screws were installed in the proximal segment and four screws in the distal segment using a conventional plate; Group 5, three screws were installed in the proximal segment and four screws in the distal segment using a locking plate. In an universal testing machine coupled to a polariscope, a load was applied to the first molar 10 times. The 50 images were randomly numbered and analyzed qualitatively and quantitatively by two raters., Results: The locking system promoted better stress distribution along the osteosynthesis. The locking system reduced stress magnitude in the distal segment, with a significant between-group difference ( P ≤ 0.001)., Conclusions: The locking plate/screw system can distribute stress more evenly throughout the osteosynthesis, especially when long seven-hole plates are used. Key words: Internal fracture fixation, osteosynthesis, mandibular fracture, bone plates., Competing Interests: Conflicts of interest The authors have no conflicts of interest to disclose., (Copyright: © 2021 Medicina Oral S.L.)

Purpose: It is important to understand the factors that can increase the incidence of complications after mandibular fracture (MF) treatment. The objective of the present study was to investigate whether occlusal stability influences the occurrence of postoperative complications in MFs treated with internal rigid fixation., Patients and Methods: We performed a prospective cohort study of patients treated for MF by osteosynthesis with plate and screw fixation. The primary predictor variable was the occlusal stability (yes vs no). Occlusion was scored as stable (group 1) if the patients had all their teeth and no free ends in either dental arch. Occlusion was coded as unstable (group 2) if the patients were partially edentulous with free ends in either dental arch or had edentulism involving more than 6 dental elements. The primary outcome variable was postoperative complication (yes vs no). The secondary outcome variables were the osteosynthesis system used (2.0 or 2.4 mm), local factors, age, and gender. Statistical analysis was performed using the χ 2 statistical test at 5% significance., Results: Of 115 patients with 121 MFs, 73 (63.48%) had stable occlusion (group 1) and 42 (36.52%) had unstable occlusion (group 2). The mean age was 34.11 years, and 71.3% were men. The postoperative complication rate was 8.70% (10 patients). Of the 10 patients with complications, 3 (2.6%) were in group 1 and 7 (6.1%) were in group 2 (P = .021 and P < .05, respectively). The 2.0-mm system was used in 107 cases (93%). All the complications were associated with use of the 2.0-mm osteosynthesis plates, occurring in 3 of 69 patients in group 1 (4.34%) and 7 of 38 patients in group 2 (18.42%; P = .032 and P < .05, respectively). The greatest number of complications was associated with unilateral MF (9 of 109). The occurrence of postoperative complications in angle and symphysis/parasymphysis fracture sites was equal., Conclusions: The results of the present study suggest that unstable occlusion could increase the rate of postoperative complications in MFs treated with plates and screws. Future studies are required with occlusal stability included as a variable., (Copyright © 2020 American Association of Oral and Maxillofacial Surgeons. All rights reserved.)

Mandibular reconstruction techniques are always a challenge to oral and maxillofacial (OMF) surgeons. Techniques and treatment plans that offer the patient OMF rehabilitation should always be available. Technological innovations have enabled more rapid, safer, and more secure treatment than in the past. This article describes a case using a different approach. The patient was treated with marginal mandibulectomy and immediate rehabilitation with osseointegrated implants; a hybrid prosthesis was fabricated a short time thereafter. This treatment plan demonstrated its utility and efficiency in this case. An approach with fewer surgeries and OMF rehabilitation needs be considered in all cases.

The surgical treatment of dentofacial deformities is performed routinely and predictably in dentate patients. However, when dealing with the edentulous maxilla, treatment becomes more challenging and less predictable. In these cases, the combination of orthognathic surgery and osseointegrated implants could be a viable alternative to enable fixed rehabilitation. A patient with an edentulous and atrophic maxilla with maxillomandibular discrepancy and high esthetic requirement was treated with a combination of osseointegrated implants and orthognathic surgery. The rehabilitative sequence was composed of maxillary grafting procedures, installation of dental implants, placement of a fixed implant-supported prosthesis, and bimaxillary orthognathic surgery. During provisional restoration before orthognathic surgery, smaller teeth were used, allowing achievement of appropriate tooth length for the final restoration, even after natural and expected postoperative relapse. This restorative approach provided an implant-supported fixed prosthesis without prosthetic compensation and with optimum esthetics and biomechanics., (Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Objective: This retrospective study evaluated the use of a single miniplate for the treatment of mandibular angle fractures (MAF)., Methods: Fifty patients with 53 MAF were treated by open reduction and internal fixation with the use of a single miniplate and were analyzed in this study., Results: Five patients with MAF had postoperative complications that required additional procedures. Three patients had postoperative infection, one patient complained of malocclusion in the first postoperative week, and one patient had miniplate exposure three months after surgery. Every additional procedure was performed in the office under local anesthesia without disruption of the initial fracture treatment. Postoperative maxillomandibular fixation (MMF) was performed in four patients. Treatment of MAF using a single miniplate was effective, with low morbidity and with low rates of postoperative complications. MAF can be treated without MMF, and stability is improved when long miniplates are used., Conclusions: The use of a single miniplate is therefore encouraged. However, postoperative MMF should be considered with the presence of little contact between bone segments, malocclusion, or extensive tooth loss.

The aim of this study was to assess the biomechanical stability of six different osteosynthesis methods after sagittal split osteotomy. Sixty polyurethane hemimandibles were divided into two groups, with six subgroups in each. After 10-mm advancement of the distal segment (group 1) and 10-mm advancement combined with 20° counterclockwise rotation (group 2), the bone segments were fixed using 2.0-mm plates/screws as follows: subgroup A, one conventional straight plate; subgroup B, two conventional straight plates; subgroup C, one conventional sagittal plate; subgroup D, one locking straight plate; subgroup E, two locking straight plates; subgroup F, one locking sagittal plate. The hemimandibles were tested for compressive strength by three-point biomechanical test, until there was 3mm of displacement between the segments. The fixations showed better performance in group 1 than in group 2 in all cases, with statistical significance for subgroups A, C, and D. In both groups, the use of two straight miniplates showed the most resistance, followed by the sagittal miniplates. However, in counterclockwise rotations, no statistically significant difference was found between two conventional straight plates and the sagittal locking plate. This study shows that the use of two plates is the form of fixation with the minimum displacement. If the clinician opts to use one plate, a sagittal plate is the best alternative., (Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. All rights reserved.)

Introduction: Sports' practitioners are vulnerable to dental trauma; if this occurs, the emergency treatment should be fast and efficient. This may be performed by any person at the site of the accident, not only by dental professionals. Physical educators may face dental trauma and should be able to provide proper care. This study had the objective evaluated the knowledge of physical education graduates on dental trauma., Materials and Methods: A questionnaire containing questions on dental trauma was applied to 199 physical education students; after collection of the questionnaires, data were tabulated and processed on the software Epi Info 2000 (Centers for Disease Control and Prevention, 1600 Clifton Rd., Atlanta, GA 30333, USA). As a result, only 36.7% of participants would take the individual suffering trauma to the dental professional, 56.8% believe that the avulsed tooth should be replanted, and 42.2% would replant it. Only 7.5% would store the avulsed tooth in an ideal storage medium for transportation., Conclusion: It was concluded that there is a lack of knowledge on dental trauma among physical education graduates, evidencing the need of public policies to allow education on this issue., Competing Interests: There are no conflicts of interest.

Facial nerve has great functional and aesthetic importance to the face, and damage to its structure can lead to major complications. This article reports a clinical case of neuroanastomosis of the facial nerve after facial trauma, describing surgical procedure and postoperative follow-up. A trauma patient with extensive injury cut in right mandibular body causing neurotmesis of the VIIth cranial nerve and mandibular angle fracture right side was treated. During surgical exploration, the nerve segments were identified and a neuroanastomosis was performed using nylon 10-0, after reduction and internal fixation of the mandibular fracture. Postoperatively, an 8-month follow-up showed good evolution and preservation of motor function of the muscles of facial mime, highlighting the success of the surgical treatment. Nerve damage because of facial trauma can be a surgical treatment challenge, but when properly conducted can functionally restore the damaged nerve.

The purpose of this paper was to analyze specimens of autogenous bone block grafts exposed to the oral cavity after ridge reconstructions. Specimens of chronic suppurative osteomyelitis (CSO) of the jaws were used as comparison for bacterial colonization pattern. For this, 5 specimens of infected autogenous bone grafts were used and 10 specimens of CSO embedded in paraffin were stained with Brown and Brenn technique and analyzed under light microscopy. The results showed a similar colonization pattern in both situations, with the establishment of bacterial biofilm and the predominance of Gram-positive bacteria. The conclusion was that the similarity in bacterial distribution and colonization between autogenous bone grafts and CSO stresses the necessity of more invasive procedures for the treatment of the autogenous bone grafts early exposed to the oral cavity.

Success of alveolar reconstructions using onlay autogenous block bone grafts depends on their adequate integration to the recipient bed influenced by a number of local molecules. Considering the fundamental role of cyclooxygenase (COX-2) in bone repair, the aim of this study was to analyze the effect of its inhibition in the integration of endochondral (EC) iliac crest, and intramembranous (IM) calvaria bone grafts. Thirty-two rabbits were divided into 4 groups: Calvaria Control (CC) and Iliac Control--treated with oral 0.9 % saline solution, and Calvarial-NSAID (C-NSAID) and Iliac-NSAID (I-NSAID) groups--treated with oral 6 mg/Kg non-steroidal anti-inflammatory drug etoricoxib. After 7, 14, 30 and 60 days the animals were euthanized and the specimens removed for histological, histomorphometric and immunohistochemistry analysis. At day 60, a tight integration of IM blocks could be seen with the presence of remodeling bone, whereas integration of EC grafts was mainly observed at the edges of the grafts. A significant higher percentage of bone matrix in the interface region of the CC grafts in comparison to C-NSAID only at day 14, whereas no differences were detected comparing the EC grafts. No differences were observed in Runx-2 and vascular endothelial growth factor (VEGF) immunolabeling when comparing CC and C-NSAID groups, while a significant weaker Runx-2 and VEGF labeling was detected in I-NSAID group at day 60. Although some influence was detected in osteogenesis, it is concluded that drug induced inhibition of COX-2 does not impair onlay bone grafts' healing of both embryologic origins in rabbits.

This study verified the resistance to displacement of six miniplate fixation methods after sagittal split osteotomy (SSO). SSO was performed in 30 polyurethane synthetic mandible replicas. The distal segments were advanced (4 mm) and specimens were grouped according to the fixation method: four-hole standard miniplate; four-hole locking miniplate; six-hole standard miniplate; six-hole locking miniplate; six-hole standard sagittal miniplate; six-hole locking sagittal miniplate. Biomechanical evaluation was performed by applying compression loads to three points on the second molar region, using an Instron universal testing machine until a 3mm displacement of the segments occurred. Compression loads able to produce 3mm displacement were recorded in kN and subjected to analysis of variance (P<0.01) and Tukey's tests for comparison between groups (P<0.05). The locking sagittal miniplate showed higher resistance to displacement than the regular four- and six-hole locking and standard miniplates. No significant differences were observed between the locking sagittal miniplate and the regular sagittal or the four-hole locking miniplates. Two of the three groups with the best results had locking plate fixation methods. Fixation of SSO with a single miniplate is better accomplished using six-hole locking sagittal miniplates, six-hole standard sagittal miniplates, or four-hole locking miniplates; these methods are more resistant to displacement., (Copyright © 2012 International Association of Oral and Maxillofacial Surgeons. All rights reserved.)

This in vitro study evaluated the influence of the type of miniplate and the number of screws installed in the proximal and distal segments on the stability and resistance of Champy's osteosynthesis in mandibular angle fractures. Sixty polyurethane hemimandibles with bone-like consistency were randomly assigned to four groups (n=15) and sectioned in the mandibular angle region to simulate fracture. The bone segments were fixed by different osteosynthesis methods using 2.0 mm miniplates and 2.0 mm × 6 mm monocortical screws. In groups 1 and 2, two conventional (G1) or locking (G2) screws were installed in each bone segment using a conventional (G1) or a locking (G2) straight miniplate; in groups 3 and 4, three conventional (G3) or locking (G4) screws were installed in the proximal segment and four conventional (G3) or locking (G4) screws were installed in the distal segment using a conventional (G3) or a locking (G4) seven-hole straight miniplate. The hemimandibles were loaded in compressive strength until a 4mm displacement occurred between the segments, vertically or horizontally. Locking plate/screw systems provided significantly greater resistance to displacement than conventional ones (p<.01). Locking miniplates offered more resistance than conventional miniplates. Long locking miniplates provided greater stability than short ones., (Copyright © 2010 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

Purpose: The aim of this in vitro study was to assess the biomechanical stability of 9 different osteosynthesis methods after sagittal split ramus osteotomy by simulating the masticatory forces and using a 3-point biomechanical test method., Materials and Methods: Forty-five polyurethane hemimandibles with bone-like consistency were randomly assigned to 9 groups (n = 5) and subjected to sagittal split ramus osteotomy. After 4-mm advancement of the distal segment, the bone segments were fixed by different osteosynthesis methods using 2.0-mm miniplate/screw systems: group A, one 4-hole conventional straight miniplate; group B, one 4-hole locking straight miniplate; group C, one 4-hole conventional miniplate and one bicortical screw; group D, one 4-hole locking miniplate and 1 bicortical screw; group E, one 6-hole conventional straight miniplate; group F, one 6-hole locking straight miniplate; group G: two 4-hole conventional straight miniplates; group H, two 4-hole locking straight miniplates; and group I, 3 bicortical screws in an inverted-L pattern. All models were mounted on a base especially constructed for this purpose. Using a 3-point biomechanical test model, the hemimandibles were loaded in compressive strength in an Instron machine (Norwood, MA) until a 3-mm displacement occurred between segments vertically or horizontally. Data were analyzed by analysis of variance and Tukey test (alpha = 1%)., Results: The multiparametric comparison of the groups showed a statistically significant difference (P < .01) between groups that used 2 miniplates (groups G and H), 1 miniplate and 1 bicortical screw (groups C and D), and only bicortical screws (group I) compared with groups that used only 1 miniplate with 2 screws per segment (groups A and B) and 3 screws per segment (groups E and F)., Conclusion: The placement of 2.0-mm-diameter bicortical screws in the retromolar region, associated or not with conventional and locking miniplates with monocortical screws, promoted a better stabilization of bone segments. Locking miniplates presented a better performance in bone fixation in all groups., (2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

The atrophic maxilla often results in lateral, anteroposterior and vertical disproportion of the maxillary arches. This paper presents the case of a 40-year-old male with a severely atrophic maxilla who underwent oral rehabilitation. He was treated with onlay and inlay iliac bone grafts followed by vestibuloplasty and dental implant placement 170 days after initial bone grafting. The dental implants were uncovered after 4 months of healing. The patient also underwent orthognathic surgery for correction of the maxillary basal bone and to improve implant positioning. At the 48-month follow-up there were no complications.

Selective cyclooxygenase-2 non-steroidal anti-inflammatory drugs are known to inhibit bone repair, especially when long-term administration is required due to chronicle inflammatory diseases. In order to evaluate the action of this drug in bone repair during short-term administration, 48 rats underwent surgical bone defects in their tibias, being randomly distributed into three groups: (Group 1) negative control; (Group 2) animals treated with celecoxib, and (Group 3) animals treated with ketoprofen, both experimental groups at 1 mg/kg dose, beginning 1 h before the surgical procedure and after every 12 h for the following 3 days, or until the day of sacrifice. The animals were killed after 48 h, 7, 14, and 21 days. The tibias were removed for morphological, morphometric, and immunohistochemistry analysis for COX-2. No statistical significant differences were observed in the quality of bone repair and quantity of formed bone among the groups. COX-2 immunoreactivity of the celecoxib treated specimens was more intense in the first analyzed period, and no longer observed in the periods of 14 and 21 days. Such results suggest that the administration of the analyzed drugs in short periods does not interfere with the process of bone repair in the tibia of rats.

In oral surgery, the quality of bone repair may be influenced by several factors that can increase the morbidity of the procedure. The type of equipment used for ostectomy can directly affect bone healing. The aim of this study was to evaluate bone repair of mandible bone defects prepared in rabbits using three different rotary devices. Fifteen New Zealand rabbits were randomly assigned to 3 groups (n=5) according to type of rotary device used to create bone defects: I--pneumatic low-speed rotation engine, II--pneumatic high-speed rotation engine, and III--electric low-speed rotation engine. The anatomic pieces were surgically obtained after 2, 7 and 30 days and submitted to histological and morphometric analysis. The morphometric results were expressed as the total area of bone remodeling matrix using an image analysis system. Increases in the bone remodeling matrix were noticed with time along the course of the experiment. No statistically significant differences (p>0.05) were observed among the groups at the three sacrificing time points considering the total area of bone mineralized matrix, although the histological analysis showed a slightly advanced bone repair in group III compared to the other two groups. The findings of the present study suggest that the type of rotary device used in oral and maxillofacial surgery does not interfere with the bone repair process.