Search

Although most prey are attacked by multiple predators, much of the ecological theory on prey suppression focuses on the effects of a single predator. The presence of multiple predators can lead to complex interactions such as trait-mediated interactions (TMIIs) and intraguild predation which can influence the suppression of pest populations. Here we explore the effect of two predators, a native anole lizard species Anolis cristatellus (Squamata: Dactyloidae) and a non-native ant species Wasmannia auropunctata (Hymenoptera: Formicidae), on the coffee leaf miner, Leucoptera coffeella (Lepidoptera: Lyonetiidae) (CLM). In a laboratory experiment we examined the effects of these two predators in isolation and when co-occurring. Our results show that when each predator is alone, they are able to consume the CLM in a comparable way. However, when they are together, their effect is not greater than when alone. This indicates that there is a negative effect when both predators co-occur. The results from this experiment have practical implications since both predators are present in coffee agroecosystems in Puerto Rico, where the CLM is considered the main insect pest. Furthermore, these results demonstrate the potential dynamics among several predators in agroecosystems and the potential implications for herbivore regulation.

IntroductionGiven the limited number of patients in Latin America who have received a booster dose against the COVID-19, it remains crucial to comprehend the effectiveness of different vaccine combinations as boosters in real-world scenarios. This study aimed to assess the real-life efficacy of seven different vaccine schemes against COVID-19, including BNT162b2, ChAdOx1-S, Gam-COVID-Vac, and CoronaVac as primary schemes with either BNT162b2 or ChAdOx1-S as booster vaccines.MethodsIn this multicentric longitudinal observational study, participants from Mexico and Argentina were followed for infection and SARS-CoV-2 Spike 1–2 IgG antibodies during their primary vaccination course and for 185 days after the booster dose.ResultsA total of 491 patients were included, and the booster dose led to an overall increase in the humoral response for all groups. Patients who received BNT162b2 exhibited the highest antibody levels after the third dose, while those with primary Gam-COVID-Vac maintained a higher level of antibodies after six months. Infection both before vaccination and after the booster dose, and Gam-COVIDVac + BNT162b2 combination correlated with higher antibody titers.DiscussionThe sole predictor of infection in the six-month follow-up was a prior COVID-19 infection before the vaccination scheme, which decreased the risk of infection, and all booster vaccine combinations conveyed the same amount of protection.

Abstract: Whether an ecological community is controlled from above or below remains a popular framework that continues generating interesting research questions and takes on especially important meaning in agroecosystems. We describe the regulation from above of three coffee herbivores, a leaf herbivore (the green coffee scale, Coccus viridis), a seed predator (the coffee berry borer, Hypothenemus hampei), and a plant pathogen (the coffee rust disease, caused by Hemelia vastatrix) by various natural enemies, emphasizing the remarkable complexity involved. We emphasize the intersection of this classical question of ecology with the burgeoning field of complex systems, including references to chaos, critical transitions, hysteresis, basin or boundary collision, and spatial self-organization, all aimed at the applied question of pest control in the coffee agroecosystem.

In ecology, Alan Turing's proposed activation-inhibition mechanism has been abstracted as corresponding to several ecological interaction types to explain pattern formation in ecosystems. Consumer-resource interactions have strong theoretical arguments linking them to both the Turing mechanism and pattern formation, but there is little empirical support to demonstrate these claims. Here, we connect several lines of evidence to support the proposition that consumer-resource interactions can create empirically observed spatial patterns through a mechanism similar to Turing's theory. We propose the existence of a fine-scale demographic spatial pattern (DSP), in which the youngest resources are located at the periphery and oldest in the center of clusters. We find evidence of a DSP in the spatially clustered distribution of arboreal ant nests, whose large-scale spatial patterning has previously been hypothesized to be driven by ant parasitoids. Through a combination of field surveys and analysis of demographic trends, we demonstrate how the DSP structures the interactions between the ant and its parasitoid. To explore the implications of DSP for consumer-resource pattern forming systems generally, we use a spatially explicit consumer-resource model to show how relative diffusion rates of the system shape multiscale spatial patterns that structure the demographic trends of the resource population in predictable ways. This work provides both empirical support for consumer-resource spatial patterns as well as a multiscale approach to understand their spatially explicit population dynamics. [ABSTRACT FROM AUTHOR]

Terminals obtained from spent lead-acid batteries in Mexico contain around 2 wt% Sb. The terminals were melted in an electric furnace and then oxygen was injected at 750 °C with a gas flow rate of 2 L/min to produce high purity Sb2O3. The antimony trioxide obtained was treated with a mixture of Na2CO3-SiC at 1000 °C to obtain metallic antimony. The antimony trioxide was reduced by C present in reagents while silicon and sodium formed a slag phase. The amounts of Sb2O3 and SiC were held constant while the Na2CO3 was evaluated in the range from 30 to 42 wt%. The produced antimony and slag were characterized by the X-ray diffraction and SEM-EDS techniques. The addition of 34 wt% Na2CO3 led to the recovery of antimony up to 90.16 wt% (99.57 wt% purity) and the lowest antimony losses in the slag (2 wt%). In addition, the compounds Na2SiO3 and Na2Si2O5 formed in the slag indicated a more stable slag. Na2CO3 contents higher than 38 wt% decreased the antimony recovery since Na2Sb4O7 compound was promoted in the slag. The oxidation and reduction process was modeled in FactSage 7.3 software for a better understanding of the Na2CO3 and SiC additions on the antimony recovery rates and compounds formed in the slag.

Understanding the ecology of mutualisms becomes a particularly important task when considering agroecosystems, as many ecosystem services are associated with mutualistic interactions. Here we report on experiments associated with an indirect pest control mutualism between the arboreal nesting ant Azteca sericeasur and coffee. This system is particularly interesting because the indirect Azteca-Coffea mutualism emerges from an Azteca-scale insect mutualism that takes place on the coffee plant. We describe this interaction structure as a mutualism-dependent mutualism and ask whether the density of intermediary mutualist (scale insects, Coccus) that benefits Azteca also influences the benefits provided to coffee plants. We found that indeed Azteca’s benefit to Coffea is consistent when Coccus density is high. Furthermore, we also found that at low Coccus density Azteca only benefits Coffea in the beginning of the rainy season, and this effect is likely due to the fact that Coccus produces less sugars with higher precipitation. We suggest a framework for thinking about context-dependency in agroecosystem mutualisms that may provide a more mechanistic way to tease apart the prevalent context-dependent results in ecological literature. Finally, we address some past recommendations as it pertains to the management of the Azteca-Coffea-Coccus complex in coffee agroecosystems.

Highlights The demand for natural fiber‐reinforced polymer composites is increasing in the automotive industry, and Mexican blue‐gave fiber (AF) is getting attention from automakers. Quantitative characterization of the tensile behavior of AF allows for a better ascertain of fiber performance. This work developed a model to study the elastoplastic behavior of AF prior and after its incorporation within a thermoplastic matrix. Finite element predictions showed excellent agreement with both theoretical and experimental values from literature. It was revealed that the increase in the fiber aspect ratio hastens the interaction between nearby defects within the fiber with earlier coalescence of voids, and ultimately fosters the loss of both fiber ductility and load carrying capacity. Moreover, the preponderant character of the damage in AF is controlled by nucleation and growth of voids. On the other hand, AF reinforced thermoplastic composites exhibit a microfailure based essentially on the matrix failure, and the composites become more damage tolerant with the increase in fiber aspect ratio. Stiffer AF leads to a more uniform interfacial shear stress distribution, with higher stiffness of the composite. Therefore, the effectiveness of AF to reinforce polymeric matrixes depends strongly on the elastic mismatch of the coupled materials. Local stress state in AF is correlated to macroscopic stress. AF may be recognized as a von Mises material. Ductile fracture in AF is controlled by nucleation and growth of voids. Increasing the fiber aspect ratio leads to more damage tolerant composites. Stiffer AF led to a more uniform interfacial shear stress distribution. [ABSTRACT FROM AUTHOR]

BackgroundScarce information exists in relation to the comparison of seroconversion and adverse events following immunization (AEFI) with different SARS-CoV-2 vaccines. Our aim was to correlate the magnitude of the antibody response to vaccination with previous clinical conditions and AEFI.MethodsA multicentric comparative study where SARS-CoV-2 spike 1-2 IgG antibodies IgG titers were measured at baseline, 21-28 days after the first and second dose (when applicable) of the following vaccines: BNT162b2 mRNA, mRNA-1273, Gam-COVID-Vac, Coronavac, ChAdOx1-S, Ad5-nCoV and Ad26.COV2. Mixed model and Poisson generalized linear models were performed.ResultsWe recruited 1867 individuals [52 (SD 16.8) years old, 52% men]. All vaccines enhanced anti-S1 and anti-S2 IgG antibodies over time (p

An initial assessment of the gray cast irons production by injecting an inoculant with a conveying gas into a molten iron bath was evaluated at a laboratory scale. A numerical simulation was carried out to determine the hydrodynamic behavior between the inoculant particles injected into the molten iron. It was determined that an optimal interaction between the particles with the molten iron occurred at a lance depth of 7 cm and for the particle sizes fine (211 to 297 μm) and medium (421 to 590 μm), and the residence time was of 0.38 and 0.4 s, respectively. The melting time was calculated at 0.0008 and 0.003 s for the particle sizes fine and medium, respectively. After the injection, the FeSi of the inoculant melted quickly, releasing the elements of the inoculant which interacted with the molten iron and formed oxides and sulfides creating nucleating sites during solidification. The injection technique allowed obtaining a type-A graphite distribution for the fine and medium particle sizes. The number of eutectic cells increased when the inoculant particle size decreased despite of the low graphitisers elements and manganese contents used in the gray cast iron manufacturing.

Comparisons among the different vaccines against SARS-CoV-2 are important to understand which type of vaccine provides more protection. This study aimed to evaluate the real-life efficacy through symptomatic infection and the humoral response of six different vaccines against SARS-CoV-2—BNT162b2, mRNA-1273, ChAdOx1-S, CoronaVac, Ad26.COV2, and Ad5-nCoV. This multicentric observational longitudinal study involved hospitals from Mexico and Brazil in which volunteers who received complete vaccination schemes were followed for 210 days after the last dose. SARS-CoV-2 Spike 1–2 IgG levels were taken before receiving the first vaccine, 21 days after each dose, and the last sample at six months (+/−1 month) after the last dose. A total of 1132 individuals exposed to five COVID-19 waves were included. All vaccines induced humoral responses, and mRNA vaccines had the highest antibody levels during follow-up. At six months, there was a decline in the SARS-CoV-2 Spike 1–2 IgG antibody titers of 69.5% and 36.4% in subjects with negative and positive history of infection respectively. Infection before vaccination and after complete vaccination scheme correlated with higher antibody titers. The predictors of infection were vaccination with CoronaVac compared to BNT162b2 and ChAdOx1-S. In the presence of comorbidities such as diabetes, rheumatoid arthritis, or dyslipidemia, CoronaVac lowered the risk of infection.

Within modern biotechnology, different tools and methodologies have been developed to maximize canine semen conservation protocol to optimize reproductive results. In the last decades, the survival of chilled semen has been prolonged from 2 to 3 days with the first basic diluents, to 10–14 days with the modern extenders. However, their main limitation is that sperm quality decreases during cold storage. Sperm activators (SA) have been produced to provide the molecules necessary to maximize the sperm survival and quality with the aim to enhance fertility and prolificacy. In this study, the effect of commercial extender SA (Theriosolution® Canine AI extender -Chile-) was recorded by daily evaluation of chilled semen for 14 days. In this experiment, sperm-rich ejaculate fraction was collected from six adult healthy Neapolitan Mastiff dogs. The semen evaluation started immediately after collection (d0), and after that a next generation extender was added (d0) for every 24 h from d1 (with and without SA) to d14, to determine spermatozoa progressive motility, velocity of forward progression (VFP), morphology, and integrity of the spermatic membrane. The initial sperm concentration of extended semen was 417.3 ± 170.4 x 106/mL (mean ± SEM) with 85.89 ± 4.76% of MNS (morphologically normal sperm), 84.47 ± 5.22 % live sperm, and pH of 6.2 ± 2.8. The initial VFP was 3.83 ± 0.48, but after 1 min with SA, it rises to 4.45 ± 0.45 (P < 0.001). The sperm progressive motility parameter increases significantly (P < 0.05) in experimental trial, respect to control, starting to d2 at finish (except for d7). The VFP analysis significantly increases in experimental trial (P < 0.05) during most days of the study with the exclusion of d3 and d14. To evaluate the seminal characteristics over time, the experiment was divided into T1 (d0–d5), T2 (d6–d10), and T3 (d11–d14) (P < 0.001) in evaluation of morphology and membrane functionality. The MNS reached 70% at d10 and finally 65% at d14, being considered normal and possibly fertile. With Host-s, 65% of MNS were also achieved at d14. The presence of glucose and fructose in the diluents used for refrigeration can exert very important effects given the fact that metabolic routes have been found in both sugars, providing both different and complementing effects. It can be concluded that the use of SA prior to artificial insemination improves the quality of chilled semen significantly, although it does not reverse the effects of deterioration due to cellular metabolism over time.

BackgroundVaccination is our main strategy to control SARS-CoV-2 infection. Given the decrease in quantitative SARS-CoV-2 spike 1-2 IgG antibody titers three months after the second BNT162b2 dose, healthcare workers received a third booster six months after completing the original protocol. This study aimed to analyze the quantitative SARS-CoV-2 spike 1-2 IgG antibody titers and the safety of the third dose.Material and methodsA prospective longitudinal cohort study included healthcare workers who received a third booster six months after completing the BNT162b2 regimen. We assessed the quantitative SARS-CoV-2 spike 1-2 IgG antibody titers 21-28 days after the first and second dose, three months after the completed protocol, 1-7 days following the third dose, and 21-28 days after booster administration.ResultsThe cohort comprised 168 participants aged 41(10) years old, 67% of whom were female. The third dose was associated with an increase in quantitative antibody titers, regardless of previous SARS-CoV-2 history. In cases with a negative SARS-CoV-2 history, the median (IQR) antibody titer values increased from 379 (645.4) to 2960 (2010) AU/ml, whereas in cases with a positive SARS-CoV-2 history, from 590 (1262) to 3090 (2080) AU/ml (pConclusionThe third dose applied six months after the original BNT162b2 regimen increased the quantitative SARS-CoV-2 spike 1-2 IgG antibody titers. The booster dose was well tolerated and caused no severe AEFI.

There is scarce information related to transplacental antibody transfer against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) with different homologous and heterologous vaccination schemes. This study aimed to correlate the magnitude of transplacental transfer anti-SARS-CoV-2 antibodies in different homologous and heterologous schemes. An observational cross-sectional study was developed to identify pregnant women vaccinated against SARS-CoV-2. They were questioned about their immunization status; blood samples from the mother, umbilical cord during labor, and the newborn 72 h after birth were taken to measure anti-S1 and anti-S2 specific IgG antibodies for SARS-CoV-2. We recruited 104 women with a median age of 29 (SD 1.17). We found antibodies in all newborns with vaccinated mothers. Homologous BNT162b2 mRNA regimen had the highest mean (SD) antibody titers (AU/mL) in maternal (994.93 (3.08), p = 0.039), umbilical cord (1316.43 (2.79), p = 0.016), and newborn (1192.02 (3.55), p = 0.020) blood. The generalized linear model showed a positive effect over antibodies with at least one dose in maternal (β = −1.1, p = 0.002) and newborn (β= −0.717, p = 0.044) blood, and with two doses (β = −0.684, p = 0.026) in umbilical cord blood. In conclusion, antibodies were detected in all vaccinated women and their newborns. Transfer of antibodies was found from the first dose, and the levels increased with the number of vaccine doses. Vaccination should be encouraged in pregnant women with any available scheme.

There is scarce information on seroconversion and adverse events after immunization (AEFI) with the fourth dose of BNT162b2. Our aim was to correlate the magnitude of the antibody response to this vaccination regimen in terms of clinical conditions and AEFI. This was an observational pilot study in which SARS-CoV-2 S1–S2 IgG antibodies titers were measured 21–28 days after the first and second dose, three months after the second dose, 1–7 and 21–28 days after the third dose, before the fourth dose, and 21–28 days after the fourth dose. We recruited 112 subjects in a hospital in Mexico, 74% women, with an average age of 43 (SD 9) years. After the first dose, subjects had a median IgG AU/mL (IQR) of 122 (1904) that increased to 1875 (2095), 3020 (2330), and 4230 (3393) 21–28 days after the second, third, and fourth doses, respectively (p < 0.01). The number (%) who experienced any AEFI between the first and fourth doses was 90 (80.4), 89 (79), 65 (58), and 69 (61.5), respectively (p < 0.001). After the fourth dose, the most frequent of AEFI was pain at the injection site (87%). There was a correlation between AEFI and gender after the fourth dose, as well as with antibody levels (p < 0.05). During the Omicron outbreak, six (5.3%) had mild COVID-19 for 8–28 days after the fourth dose. The median increase in S1/S2 IgG was 30.8-fold after the fourth BNT162b2 dose when compared with the first dose and caused mild AEFI.

Abstract The motivation of this work is to show that the structural model, which was initially used to estimate the thermodynamic properties of binary silicate systems, can be also used to estimate the viscosity of binary and ternary silicate melts in terms of temperature and composition. The model links the viscosity to the internal structure of melts through the concentration of the oxygen bridges present in the slag. A previously proposed structural thermodynamic model was used to calculate the content of oxygen bridges. The viscosity model requires only three parameters to obtain a good agreement between experimental and calculated data for the SiO2−FeO binary system and for the SiO2−CaO−FeO, SiO2−MgO−FeO and SiO2−MnO−FeO ternary systems. The viscosity of ternary systems was calculated with the model while assuming a linear function of the parameters from binary systems; however, the content of the oxygen bridges was calculated using the thermodynamic model for ternary systems.

The efficacy of one dose Ad5-nCoV has been concerning. This study aimed to evaluate the effect of a single dose BNT162b2 in individuals after a completed Ad5-nCoV vaccination regiment compared to a group without this boost measuring SARS-CoV-2 Spike 1–2 IgG antibodies in plasma. This observational study included a subgroup analysis of patients who were immunized with Ad5-nCoV in a northern city of Mexico. During follow-up, some patients self-reported having received a BNT162b2 booster. We report baseline IgG levels, 21–28 days after the Ad5-nCoV dose, three months, and an additional 21–28 days after BNT162b2 (four months after Ad5-nCoV). Seventeen patients, age 40 (16), 52.9% men, were analyzed. We created four groups: G1 and G2 refer to patients without a history of SARS-CoV-2 infection, vaccinated with Ad5-nCoV and Ad5-nCoV/BNT162b2 (n = 4 and n = 6), respectively; G3 and G4 included patients with a history of SARS-CoV-2 infection and immunized with Ad5-nCoV and Ad5-nCoV/BNT162b2 (n = 5 and n = 2), respectively. The Ad5-nCoV/BNT162b2 protocol reported higher antibody titers after 21–28 days. Median (IQR) values were: G1 46.7 (-), G2 1077.5 (1901), G3 1158.5 (2673.5), and G4 2090 (-) (p < 0.05). Headache and pain at injection site were the most frequent adverse reactions associated with Ad5-nCoV (n = 10, 83%) and BNT162b2 (n = 5, 83.3%), respectively. Patients receiving BNT162b2 after Ad5-nCoV had higher SARS-CoV-2 spike 1–2 IgG antibody titers and had no severe adverse reactions.

Rivera, P., Chávez, R., & Rivera-Salinas, F. (enero-febrero, 2018). Avances y limitantes en el tratamiento del agua residual del estado de Zacatecas. Tecnología y Ciencias del Agua, 9(1), 113-123, DOI: 10.24850/j-tyca-2018-01-08. El tratamiento del agua residual y el que éstas cumplan la(s) norma(s) establecida(s) es uno de los grandes retos gubernamentales. Sin embargo, los diferentes contextos demandan acciones acordes con las necesidades y características de cada lugar. En los últimos diez años, en el estado de Zacatecas, México, se han construido una serie de plantas de tratamiento con el objetivo de contribuir al saneamiento de las cuencas hidrológicas. Sin embargo, a pesar de estos avances en la infraestructura, es necesario analizar el funcionamiento y tratamiento de las plantas estatales, a fin de clarificar los retos en la materia. Para efectuar este trabajo se consultaron cuatro fuentes clave: Inventario y situación actual de las plantas de tratamiento del estado de Zacatecas (Rivera-Salinas, 2011); el Inventario nacional de plantas municipales de potabilización y de tratamiento de aguas residuales en operación (Conagua, 2011); el Diagnóstico de las plantas de tratamiento de agua residual (PTAR, 2014) y, finalmente, el Inventario de la Secretaría de Agua y Medio Ambiente (SAMA, 2017). Se encontró que sólo un 53% de las plantas opera, el resto presenta problemas diversos que muestran la incapacidad municipal para paliar los problemas de tratamiento (p. ej., plantas obsoletas, bajo nivel de tratamiento, incapacidad financiera de los municipios y personal no capacitado, entre otros), obligando al gobierno a intervenir y centralizar el tratamiento en zonas urbanas, con plantas con tecnología avanzada. Ello significa una no eficiente descentralización de servicios y una baja coordinación entre municipios, factores indispensables a retomar en una planificación de mediano y largo plazos.

Lead was recovered through a direct smelting reduction route from a lead concentrate by using mixtures of Na2CO3 and SiC to 1000 °C. The lead concentrate was obtained from the mining State of Zacatecas, México by traditional mineral processing and froth flotation. The experimental trials showed that 86 wt.% of lead with a purity up to 97% can be recovered from the lead concentrate by a single step reduction process when 40 wt.% Na2CO3 and 0.4 g SiC were used in the initial charge. The process was modeled in the thermodynamic software FactSage 7.3 to evaluate the effect of adding different amounts of Na2CO3 on the lead recovery rates while holding constant the SiC amount and temperature. The stability phase diagram obtained showed that an addition of 34 wt.% Na2CO3 was enough to reach the highest lead recovery. It was observed that the interaction of Na2CO3 and SiC at a high temperature promotes the formation of C and Na2O, and SiO2, respectively, where the Na2O partially bonds with silica and sulfur forming Na2S and sodium silicates which may decrease the SO2 emissions and increase the weather degradation of the slag. The PbS was mainly reduced by the produced C and CO formed by the interaction between Na2CO3 and SiC at 1000 °C. The predicted results reasonably match with those obtained experimentally in the lead recovery rates and compounds formation.

Although most prey are attacked by multiple predators, much of the ecological theory on prey suppression focuses on the effects of a single predator. The presence of multiple predators can lead to complex interactions such as trait-mediated interactions (TMIIs) and intraguild predation which can influence the suppression of pest populations. Here we explore the effect of two predators, a native anole lizard species Anolis cristatellus (Squamata: Dactyloidae) and a non-native ant species Wasmannia auropunctata (Hymenoptera: Formicidae), on the coffee leaf miner, Leucoptera coffeella (Lepidoptera: Lyonetiidae) (CLM). In a laboratory experiment we examined the effects of these two predators in isolation and when co-occurring. Our results show that when each predator is alone, they are able to consume the CLM in a comparable way. However, when they are together, their effect is not greater than when alone. This indicates that there is a negative effect when both predators co-occur. The results from this experiment have practical implications since both predators are present in coffee agroecosystems in Puerto Rico, where the CLM is considered the main insect pest. Furthermore, these results demonstrate the potential dynamics among several predators in agroecosystems and the potential implications for herbivore regulation. [ABSTRACT FROM AUTHOR]

It is frequently emphasized that the action of interfacial adhesion is a critical parameter to improve the stiffness and toughness of polylactic acid/thermoplastic starch (PLA/TS) blends. In this work, the micromechanical behavior of PLA/TS blends with droplet morphology selected from literature is predicted and analyzed systematically by finite element analysis. A quantitative assessment of the effect of interface (perfect or imperfect) on the elastic behavior and craze initiation for toughening of PLA/TS blends is presented. For the elastic behavior, the PLA phase is the blend's load‐bearing component as the TS is more compliant than PLA, so an interface perfectly bonded reduces the blend's elastic modulus when compared to the modulus obtained if the interface is weakly bonded. Regarding the toughening behavior, as a compliant phase, the TS has the potential to nucleate stable crazes in the host PLA matrix independently of the degree of interfacial adhesion because the highly stressed region lies near the equator of the particle; nonetheless, the critical stress for craze initiation is very sensitive to the TS particle size. On the other hand, as the TS is less capable than PLA to develop large hydrostatic stresses, the TS has a low potential to dissipate energy by cavitation. [ABSTRACT FROM AUTHOR]

The aim of this clinical report case was to perform non-instrumental pulp therapy with CTZ in temporary dental organs in a patient with sickle cell disease (SCD). Female 5 years 7 months old, diagnosed with SCD was treated at Regional Hospital of High Speciality of the Child "Dr. Rodolfo Nieto Padrón" in the pediatric dentistry area. At the clinical observation presented tendons and conjunctival palidity, at the intraoral level presented mucous pallidity, hypomineralization, caries in various dental organs (DO), the results of blood biometry were a hemoglobin: 6.04 g/dl, erythrocytes: 1.82 g/dl, leukocytes: 15 450 x 103/µL. Dental diagnosis was early childhood caries and pulpar necrosis in temporary molars 64 and 85 the first with dentoalveolar abscess. Non-instrumental pulp therapy treatment was carried out with CTZ in both temporary molars with pulp necrosis and as temporary glass ionomer restoration and subsequently steel crowns, temporary obturations in different DO for caries lesions. Result of CTZ treatment was effective, showing clinical and radiographic improvements. Non-instrumental pulp therapy with CTZ is a viable, fast and safe effective treatment in patients with SCD, prevents bacterial spread to periodontal tissues and minimizes systemic risk. [ABSTRACT FROM AUTHOR]

The viscoelastic and mechanical performance of sustainable raw materials on biodegradable matrices provide insights into how to develop and improve materials that contribute to the circular economy. Thus, we aim to evaluate the effect of conventional (acid or alkali) and dual (alkali/acid‐ultrasound) treatment on Agave fibers, as well as their rheological and micromechanical performance on polyvinyl alcohol (PVA)‐based composites. TGA results indicate that the treatments promote the removal of moisture, waxes, pectin, hemicellulose, and lignin from the fibers to different extents. PVA matrix containing modified fibers exhibits low viscosity, flux index, and critical shear values, indicating a high interaction and dispersion of the filler in the matrix. Furthermore, tensile tests and theoretical predictions of micromechanics‐based finite element analysis show evidence that the modified fiber type provides a different stress transfer ratio (∑) than in the matrix, which changes Young's modulus values. The results indicate that Agave fibers modified by dual treatment are a useful filler to produce soft or stiff PVA composites when looking for potential applications in the mobility industry or other fields like the packaging. [ABSTRACT FROM AUTHOR]

Although the porosity in Al-SiC metal matrix composites (MMC) can be diminished; its existence is unavoidable. The purpose of this work is to study the effect of porosity on Young’s modulus of SiC reinforced aluminum matrix composites. Finite element analysis is performed based on the unit cell and the representative volume element approaches. The reliability of the models is validated by comparing the numerical predictions against several experimental data ranging in low- and high-volume fractions and good agreement is found. It is found that despite the stress transfer from the soft matrix to the reinforcement remains effective in the presence of pores, there is a drop in the stress gathering capability of the particles and thus, the resulting effective elastic modulus of composite decreases. The elastic property of the composite is more sensitive to pores away the reinforcement. It is confirmed, qualitatively, that the experimentally reported in the literature decrease in the elastic modulus is caused by the presence of pores.

Magnesium removal process from molten aluminum using particles of silica sand was studied from a hydrodynamic point of view using computational fluid dynamics (CFD). The gas-liquid flow was modeled by a model of the Euler type for both gas and liquid phase transport. Newton´s law of motion was used to describe the subsurface motion of injected solid particles from the calculated flow field in one-way coupling. The kinetics of the transitory reaction was described by using the model proposed by Ohguchi and Robertson for transitory reactions. The contacting method of reaction for silica particles of 75, 210 and 425 µm was established according to its dynamic interaction with the two phases flow. When the particle size was increased, the residence time increased as well; however, the efficiency for the transitory reaction was decreased. The reaction rate simulation showed a good agreement with experimental results reported in the literature.

A multiphase- hydrodynamic model was solved with the phase field method and the Cahn-Hilliard equation to simulate the behavior of particle injection with nitrogen as conveying gas through a submerged lance into a lead bath in two dimensions. The residence and mixing time were obtained for different operating parameters like gas flow rate, lance depth, and different kettle and lance dimensions. The residence and mixing time decreased when the injection rate and the lance diameter increased. Therefore, the particle will have less opportunity to react with the liquid bath decreasing the refining metal processes efficiency. When the lance height and kettle dimensions were increased, the residence and mixing time also increased. In order to have an efficient disengagement of the particles from the carrier gas within molten lead, the operating parameters must take into account the residence and mixing times. The Cahn-Hilliard equation represents adequately the hydrodynamic behavior in the lance-kettle system studied.