Search

A small number of anomalously bright boulders on the near-Earth, rubble-pile asteroid (101955) Bennu were recently identified as eucritic material originating from asteroid (4) Vesta. Building on this discovery, we explored the global presence of exogenic boulders on Bennu. Our analysis focused on boulders larger than 1 m that show the characteristic 1-micron pyroxene absorption band in the four-color MapCam data from the OSIRIS-REx mission. We confirm the presence of exogenic boulders similar to eucrites and find that mixtures of eucrites with carbonaceous material is also a possible composition for some boulders. Some of the exogenic boulders have spectral properties similar to those of ordinary chondrite (OC) meteorites, although the laboratory spectra of these meteorites have a higher albedo than those measured on Bennu, which could be explained by either a grain size effect, the presence of impact melt, or optical mixing with carbonaceous material owing to dust coating. Our Monte Carlo simulations predict that the median amount of OC mass added to the parent body of Bennu is 0.055% and 0.037% of the volume of a 100- and 200-km-diameter parent body, respectively. If Bennu was a uniformly mixed byproduct of parent body and S-type projectiles, the equivalent mass of OC material would be a sphere with a diameter of 36 to 40 m (or a volume of 24,200 to 33,600 m3). The total amount of OC material in the interior of Bennu estimated from the MapCam data is slightly higher (91,000-150,000 m3)., Comment: 36 pages, 11 figures, 2 tables

The Design Reference Asteroid (DRA) is a compilation of all that is known about the OSIRIS-REx mission target, asteroid (101955) Bennu. It contains our best knowledge of the properties of Bennu based on an extensive observational campaign that began shortly after its discovery, and has been used to inform mission plan development and flight system design. The DRA will also be compared with post-encounter science results to determine the accuracy of our Earth-based characterization efforts. The extensive observations of Bennu in 1999 has made it one of the best-characterized near-Earth asteroids. Many physical parameters are well determined, and span a number of categories: Orbital, Bulk, Rotational, Radar, Photometric, Spectroscopic, Thermal, Surface Analog, and Environment Properties. Some results described in the DRA have been published in peer-reviewed journals while others have been reviewed by OSIRIS-REx Science Team members and/or external reviewers. Some data, such as Surface Analog Properties, are based on our best knowledge of asteroid surfaces, in particular those of asteroids Eros and Itokawa. This public release of the OSIRIS-REx Design Reference Asteroid is a annotated version of the internal OSIRIS-REx document OREX-DOCS-04.00-00002, Rev 9 (accepted by the OSIRIS-REx project on 2014-April-14). The supplemental data products that accompany the official OSIRIS-REx version of the DRA are not included in this release. We are making this document available as a service to future mission planners in the hope that it will inform their efforts., Comment: 116 pages, 42 figures, 10 tables

Microporous black polytetrafluoroethylene (PTFE) flexible thin sheets are successfully flown as solar diffusers on NASA's Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer (OSIRIS-REx) spacecraft. They serve as multilayer insulation (MLI) blanket outer covers for the arm of the Touch And Go Sample Acquisition Mechanism (TAGSAM), the sunshade of the OSIRIS-REx Camera Suite (OCAMS) PolyCam imager, and the motor riser of the OCAMS SamCam imager. Additionally, microporous white PTFE flexible thin sheets are successfully flown as a MLI blanket outer cover with a low ratio of absorptance to emittance for the Regolith X-ray Imaging Spectrometer (REXIS). For ground testing, microporous black and white PTFE flexible thin sheets were successfully used as optical targets of the Touch And Go Camera System (TAGCAMS) NavCam imagers in the flight system thermal vacuum test.

The OSIRIS-REx spacecraft launched on September 8, 2016, on a seven-year journey to return samples from asteroid (101955) Bennu. This presentation summarizes the scientific results from the Approach and Preliminary Survey phases. Bennu observations are set to begin on August 17, 2018,when the asteroid is bright enough for detection by the PolyCam. PolyCam and MapCam collect data to survey the asteroid environment for any hazards and characterize the asteroid point-source photometric properties. Resolved images acquired during final approach, starting in late October 2018, allow the creation of a shape model using stereophotoclinometry (SPC), needed by both the navigation team and science planners. The OVIRS and OTES spectrometers characterize the point- source spectral properties over a full rotation period, providing a first look at any features and thermophysical properties. TAGSAM is released from the launch container and deployed into the sampling configuration then returned to the stow position.Preliminary Survey follows the Approach Phase in early December 2018. This phase consists of a series of hyperbolic trajectories that cross over the North and South poles and the equator of Bennu at a close-approach distance of 7 km. Images from these Preliminary Survey passes provide data to complete the 75-cm resolution SPC global shape model and solve for the rotation state. Once the shape model is complete, the asteroid coordinate system is defined for co-registration of all data products. These higher-resolution images also constrain the photometric properties and allow for an initial assessment of the geology. In Preliminary Survey the team also obtains the first OLA data, providing a measure of the surface topography. OVIRS and OTES collect data as "ride-along" instruments, with the spacecraft pointing driven by imaging constraints. These data provide a first look at the spectral variation across the surface of Bennu. Radio science measurements, combined with altimetry and imagery, determine Bennu's mass, a prerequisite to placing the spacecraft into orbit in late December 2018. Together, data from the Approach and Preliminary Survey phases set the stage for the extensive mapping planned for 2019. These dates are the baseline plan. Any contingency or unexpected discovery may change this mission profile.

The quantity of water ice that sublimates during the free fall of grains into the solar nebula from a surrounding interstellar cloud varies from over 90 percent of the grain mass as 30 AU from the nebular center to less than 10 percent at more than 100 AU. Virtually all the water that is sublimated ultimately recondenses, since the cold nebular gas lying beyond 10 AU is unable to hold more than a small portion as vapor. The return of most of the gas to solid phase near the nebular ambient temperature, of about 50 K, may result in at least two grain populations consisting, in one case, of unaltered interstellar grains which did not undergo sublimation, and in the other of water ice which cocondensed with more volatile gases at nebular ambient temperatures to yield volatile-rich amorphous phases.

The present model of Titan's atmosphere/surface evolution assumes the presence of a kilometer-deep ethane-methane ocean at the surface that serves as a tropospheric thermal balance-determining atmospheric-gas reservoir. The evolution of the atmospheric thermal structure is driven by gas-abundance changes occurring as stratospheric photolysis irreversibly converts methane into higher hydrocarbons, whereby the ocean becomes ethane-enriched and methane-depleted. A family of evolution models is presented whose various members correspond to different present-day ocean compositions, various atmospheric hydrogen abundances, and different schemes for frequency-averaging the gas opacity. A slow evolution over several billion years is envisioned.