Search

The Conductor on Rounded Core (CORC) cables manufactured by Advanced Conductor Technologies with current densities beyond 300 Amm^-2 at 4.2 K, and bending diameter of up to 3.5 cm, are considered as one of the strongest candidates for the next generation of high field power applications and magnets. In this paper, we present a full 3D FEM model for their monolayer and bilayer CORC cables made with up to three and six superconducting tapes respectively, disclosing the full curve of AC losses for the monolayer cable at magnetic fields beyond 60 mT, and the actual distribution of current density along and across the thickness of the superconducting tapes in both designs. The model is based on the so-called H-formulation, allowing to incorporate the true three-dimensionality of the tapes without recurring to 2D thin-film approaches where non-physical surface currents that do not follow the celebrated Bean's model for type-II superconductors appear. Likewise, good agreement with the experimentally measured AC-losses for the monolayer and bilayer cable have been obtained, with all the details of the model disclosed in this paper., Comment: Manuscript Accepted at IEEE Transactions on Applied Superconductivity 18 January 2022. Submitted 20 September 2021. his work was supported by the UK Research and Innovation, Engineering and Physical Sciences Research Council (EPSRC), through the grant Ref. EP/S025707/1 led by H.S.R

Conductor on a rounded core (CORC\textsuperscript{\textregistered}) cables with current densities beyond 300 A/mm$^{-2}$ at 4.2 K, and a capacity to retain around 90 $\%$ of critical current after bending to a diameter of 3.5 cm, make them a strong candidate for high field power applications and magnets. In this paper, we present a full 3D-FEM model based upon the so-called H-formulation for commercial CORC\textsuperscript{\textregistered} cables manufactured by Advanced Conductor Technologies LLC. The model presented consists of tapes ranging from 1 up to 3 SuperPower 4mm-width tapes in 1 single layer and at multiple pitch angles. By varying the twist pitch, local electromagnetic characteristics such as the current density distribution along the length and width are visualized. Measurements of macroscopical quantities such as AC-losses are disclosed in comparison with available experimental measurements. We particularly focused on the influence of the twist pitch by comparing the efficiency and performance of multiple cables, critically assessing the optimal twist pitch angle., Comment: 9 pages, 3 figures, CEC/ICMC'21 Conference, IOP Conference Series: Materials Science and Engineering, Advances in Cryogenic Engineering

A noteworthy physical dependence of the hysteresis losses with the axial winding misalignment of superconducting racetrack coils made with commercial \textcolor{black}{Second Generation High Temperature Superconducting (2G-HTS)} tapes is reported. A comprehensive study on the influence of the turn-to-turn misalignment factor on the local electromagnetic properties of individual turns, is presented by considering six different coil arrangements and ten amplitudes for the applied alternating transport current, $I_{a}$, together with an experimentally determined function for the magneto-angular anisotropy properties of the critical current density, $J_{c}(B,\theta)$, across the superconducting tape. It has been found that for moderate to low applied currents $I_{a} \leq 0.6~I_{c0}$, with $I_{c0}$ the self-field critical current of individual tapes, the resulting hysteretic losses under extreme winding deformations can lead to an increase in the energy losses of up to $25\%$ the losses generated by a perfectly wound coil. High level meshing considerations have been applied in order to get a realistic account of the local and global electromagnetic properties of racetrack coils, .... Our findings can be used as a practical benchmark to determine the relative losses for any 2G-HTS racetrack coil application, unveiling the physical fingerprints that possible coil winding misalignments could infer., Comment: 19 pages, 5 figures. Submitted AIP 16-Apr-2019 05:02:38