Search

Your search keyword '"Rojsatean, Jareenuch"' showing total 2 results
Start Over Author "Rojsatean, Jareenuch"
2 results on '"Rojsatean, Jareenuch"'

1. Friction characteristics of self-lubricating ABS under different surface roughnesses and temperatures.

Author

Rojsatean, Jareenuch, Larpsuriyakul, Patcharee, Prakymoramas, Natcha, Thanomjitr, Dumrong, Kaewket, Sanya, Singsom, Thawatchai, and Srinun, Duangruthai

Subjects
*FRICTION, *LUBRICATION & lubricants, *SURFACE roughness, *AMIDE derivatives, *CHEMICAL kinetics
Abstract

N, N"-Ethylenedistearamide (EBS) and poly(ethylene-co-octene) (EN) were selected as internal lubricants for ABS to improve its friction characteristics. The effects of additive type, part surface roughness and testing temperature on the friction characteristics were investigated and found that at 80 °C, kinetic COF were lower than at 23 °C owing to thermal softening and melting of rubber components of the contacting surfaces. EN was more effective than EBS in reducing COF and double amplitude of stick-slip curves of ABS both at 23 °C and 80 °C due to the decrease in surface energy and adhesion between moving surfaces with EN added. At 23 °C kinetic COF of ABS+5 wt%EN showed strong dependence on the surface roughness while this was not the case for ABS and ABS+0.5 wt%EBS. [ABSTRACT FROM AUTHOR]

Published
2017
Full Text
View/download PDF

2. Effect of interfacial adhesion on the mechanical properties of chopped glass fiber semipreg reinforced polymer composites.

Author

Soun, Sophy, Ruangjirakit, Kitchanon, Ohtake, Naoto, Rojsatean, Jareenuch, Keeratipinit, Kawin, and Larpsuriyakul, Patcharee

Subjects
*GLASS fibers, *FIBROUS composites, *GLASS composites, *YOUNG'S modulus, *DIFFERENTIAL scanning calorimetry, *TENSILE tests, *X-ray diffraction
Abstract

The objective of this study is to characterize the tensile properties and interfacial adhesion of chopped glass fiber semipreg reinforced polymer composites. Tensile testing was used to investigate the resistance to tension of composites. Differential Scanning Calorimetry (DSC) was also used to determine the thermal behavior of composites. Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) analysis were conducted to determine the microstructure and morphology of the composite polymers. The tensile testing results indicated that the tensile strength and Young's modulus were respectively improved by 23.45% and 53.77% for the CR-6/PA6 but decreased by 36.49% and 11.39% for CR-6/PA6GF30. DSC results revealed that crystallinity of PA6GF30 and PA6 surface of composites specimen was lower than those of PA6GF30 and PA6 specimens. SEM micrographs of CR-6/PA6 and CR-6/PA6GF30 fractured surfaces depicted good adhesion at the interface between CR-6 and injected PA6 or PA6GF30. XRD results showed that PA6 and PA6GF30 have different crystalline forms. The crystallizability of CR-6/PA6 and CR-6/PA6GF30 was promoted by the presence of CR-6. Introduction of glass fiber was shown to be helpful for formation of a more stable α-phase of PA6 and PA6GF30. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results