Search

Abstract: Self-assembled natural biomaterials offer a variety of ready-made nanostructures available for basic science research and technological applications. Most natural structural materials are made of self-assembled nanofibers with diameters in the nanometer range. Among these materials, chitin is the second most abundant polysaccharide after cellulose and is part of the exoskeleton or arthropods and mollusk shells. Chitin has several desirable properties as a biomaterial including mechanical strength, chemical and thermal stability, and biocompatibility. However, chitin insolubility in most organic solvents has somewhat limited its use. In this research highlight, we describe recent developments in producing biogenic chitin nanofibers using self-assembly from a solution of squid pen β-chitin in hexafluoroisopropanol. With this solution based assembly, we have demonstrated chitin-silk composite self-assembly, chitin nanofiber fabrication across length-scales, and manufacturing of chitin nanofiber substrates for tissue engineering. [Copyright &y& Elsevier]

Precision medicine endeavors to personalize treatments, considering individual variations in patient responses based on factors like genetic mutations, age, and diet. Integrating this approach dynamically, bioelectronics equipped with real-time sensing and intelligent actuation present a promising avenue. Devices such as ion pumps hold potential for precise therapeutic drug delivery, a pivotal aspect of effective precision medicine. However, implementing bioelectronic devices in precision medicine encounters formidable challenges. Variability in device performance due to fabrication inconsistencies and operational limitations, including voltage saturation, presents significant hurdles. To address this, closed-loop control with adaptive capabilities and explicit handling of saturation becomes imperative. Our research introduces an enhanced sliding mode controller capable of managing saturation, adept at satisfactory control actions amidst model uncertainties. To evaluate the controller's effectiveness, we conducted in silico experiments using an extended mathematical model of the proton pump. Subsequently, we compared the performance of our developed controller with classical Proportional Integral Derivative (PID) and machine learning (ML)–based controllers. Furthermore, in vitro experiments assessed the controller's efficacy using various reference signals for controlled Fluoxetine delivery. These experiments showcased consistent performance across diverse input signals, maintaining the current value near the reference with a relative error of less than 7% in all trials. Our findings underscore the potential of the developed controller to address challenges in bioelectronic device implementation, offering reliable precision in drug delivery strategies within the realm of precision medicine. [ABSTRACT FROM AUTHOR]

Hydrogels have become the material of choice in bioelectronic devices because their high‐water content leads to efficient ion transport and a conformal interface with biological tissue. While the morphology of hydrogels has been thoroughly studied, systematical studies on their ionic conductivity are less common. Here, an easy‐to‐implement strategy is presented to characterize the ionic conductivity of a series of polyelectrolyte hydrogels with different amounts of monomer and crosslinker and correlate their ionic conductivity with microstructure. Higher monomer increases the ionic conductivity of the polyelectrolyte hydrogel due to the increased charge carrier density, but also leads to excessive swelling that may cause device failure upon integration with bioelectronic devices. Increasing the amount of crosslinker can reduce the swelling ratio by increasing the crosslinking density and reducing the mesh size of the hydrogel, which cuts down the ionic conductivity. Further investigation on the porosity and tortuosity of the swollen hydrogels correlates the microstructure with the ionic conductivity. These results are generalizable for various polyelectrolyte hydrogel systems with other ions as the charge carrier and provide facile guidance to design polyelectrolyte hydrogel with desired ionic conductivity and microstructure for applications in bioelectronic devices. [ABSTRACT FROM AUTHOR]

The development of wearable bioelectronic systems is a promising approach for optimal delivery of therapeutic treatments. These systems can provide continuous delivery of ions, charged biomolecules, and an electric field for various medical applications. However, rapid prototyping of wearable bioelectronic systems for controlled delivery of specific treatments with a scalable fabrication process is challenging. We present a wearable bioelectronic system comprised of a polydimethylsiloxane (PDMS) device cast in customizable 3D printed molds and a printed circuit board (PCB), which employs commercially available engineering components and tools throughout design and fabrication. The system, featuring solution-filled reservoirs, embedded electrodes, and hydrogel-filled capillary tubing, is assembled modularly. The PDMS and PCB both contain matching through-holes designed to hold metallic contact posts coated with silver epoxy, allowing for mechanical and electrical integration. This assembly scheme allows us to interchange subsystem components, such as various PCB designs and reservoir solutions. We present three PCB designs: a wired version and two battery-powered versions with and without onboard memory. The wired design uses an external voltage controller for device actuation. The battery-powered PCB design uses a microcontroller unit to enable pre-programmed applied voltages and deep sleep mode to prolong battery run time. Finally, the battery-powered PCB with onboard memory is developed to record delivered currents, which enables us to verify treatment dose delivered. To demonstrate the functionality of the platform, the devices are used to deliver H + in vivo using mouse models and fluoxetine ex vivo using a simulated wound environment. Immunohistochemistry staining shows an improvement of 35.86% in the M1/M2 ratio of H + —treated wounds compared with control wounds, indicating the potential of the platform to improve wound healing. [ABSTRACT FROM AUTHOR]

The peripheral nerves (PNs) innervate the dermis and epidermis, and are suggested to play an important role in wound healing. Several methods to quantify skin innervation during wound healing have been reported. Those usually require multiple observers, are complex and labor-intensive, and the noise/background associated with the immunohistochemistry (IHC) images could cause quantification errors/user bias. In this study, we employed the state-of-the-art deep neural network, Denoising Convolutional Neural Network (DnCNN), to perform pre-processing and effectively reduce the noise in the IHC images. Additionally, we utilized an automated image analysis tool, assisted by Matlab, to accurately determine the extent of skin innervation during various stages of wound healing. The 8 mm wound is generated using a circular biopsy punch in the wild-type mouse. Skin samples were collected on days 3, 7, 10 and 15, and sections from paraffin-embedded tissues were stained against pan-neuronal marker- protein-gene-product 9.5 (PGP 9.5) antibody. On day 3 and day 7, negligible nerve fibers were present throughout the wound with few only on the lateral boundaries of the wound. On day 10, a slight increase in nerve fiber density appeared, which significantly increased on day 15. Importantly, we found a positive correlation (R2 = 0.926) between nerve fiber density and re-epithelization, suggesting an association between re-innervation and re-epithelization. These results established a quantitative time course of re-innervation in wound healing, and the automated image analysis method offers a novel and useful tool to facilitate the quantification of innervation in the skin and other tissues. [ABSTRACT FROM AUTHOR]

The development of wearable bioelectronic systems is a promising approach for optimal delivery of therapeutic treatments. These systems can provide continuous delivery of ions, charged biomolecules, and an electric field for various medical applications. However, rapid prototyping of wearable bioelectronic systems for controlled delivery of specific treatments with a scalable fabrication process is challenging. We present a wearable bioelectronic system comprised of a polydimethylsiloxane (PDMS) device cast in customizable 3D printed molds and a printed circuit board (PCB), which employs commercially available engineering components and tools throughout design and fabrication. The system, featuring solution-filled reservoirs, embedded electrodes, and hydrogel-filled capillary tubing, is assembled modularly. The PDMS and PCB both contain matching through-holes designed to hold metallic contact posts coated with silver epoxy, allowing for mechanical and electrical integration. This assembly scheme allows us to interchange subsystem components, such as various PCB designs and reservoir solutions. We present three PCB designs: a wired version and two battery-powered versions with and without onboard memory. The wired design uses an external voltage controller for device actuation. The battery-powered PCB design uses a microcontroller unit to enable pre-programmed applied voltages and deep sleep mode to prolong battery run time. Finally, the battery-powered PCB with onboard memory is developed to record delivered currents, which enables us to verify treatment dose delivered. To demonstrate the functionality of the platform, the devices are used to deliver H + in vivo using mouse models and fluoxetine ex vivo using a simulated wound environment. Immunohistochemistry staining shows an improvement of 35.86% in the M1/M2 ratio of H + —treated wounds compared with control wounds, indicating the potential of the platform to improve wound healing. [ABSTRACT FROM AUTHOR]

The article focuses on the study made by Alon Gorodetsky and his collegues regarding the protein reflectin found in a coastal squid loligo pealeii using the Escherichia coli. Topics discussed include the iridophores organelles which enable the squid to change the color of the skin where reflectin is present, the proton wires which are hyrogen bonds formed by hydrophilic residue and water content that enable protons to change following the Grotthuss mechanism.

Proton conductivity is important in many natural phenomena including oxidative phosphorylation in mitochondria and archaea, uncoupling membrane potentials by the antibiotic Gramicidin, and proton actuated bioluminescence in dinoflagellate. In all of these phenomena, the conduction of protons occurs along chains of hydrogen bonds between water and hydrophilic residues. These chains of hydrogen bonds are also present in many hydrated biopolymers and macromolecule including collagen, keratin, chitosan, and various proteins such as reflectin. All of these materials are also proton conductors. Recently, our group has discovered that the jelly found in the Ampullae of Lorenzini- shark’s electro-sensing organs- is the highest naturally occurring proton conducting substance. The jelly has a complex composition, but we proposed that the conductivity is due to the glycosaminoglycan keratan sulfate (KS). Here we measure the proton conductivity of hydrated keratan sulfate purified from Bovine Cornea. PdHx contacts at 0.50 ± 0.11 mS cm -1, which is consistent to that of Ampullae of Lorenzini jelly at 2 ± 1 mS cm -1. Proton conductivity, albeit with lower values, is also shared by other glycosaminoglycans with similar chemical structures including dermatan sulfate, chondroitin sulfate A, heparan sulfate, and hyaluronic acid. This observation supports the relationship between proton conductivity and the chemical structure of biopolymers. [ABSTRACT FROM AUTHOR]

Bioelectronic ion pumps deliver ions and biomolecules from a source to a target biological system with high spatiotemporal control for bioengineering and regenerative medicine applications. A voltage between a working electrode and a reference/counter electrode delivers the charged ions and biomolecules from a source to the desired target. The source and the target are separated by an ion exchange membrane so that only the charged molecules of interest are delivered. Future wearable and implantable applications require high efficiency of delivery to minimize power consumption. The majority of recent efforts on improving ion pump efficiency have focused on optimizing the ion exchange membrane. However, the contribution of the working electrode material to the ion pump efficiency has been mostly overlooked. This work identifies how changing the working electrode material greatly affects the efficiency of delivery in ion pumps. With an electrical circuit model analysis, voltammetry studies on silver, platinum, and palladium hydride working electrodes, and implementation of the Butler–Volmer equation, results show that the material‐dependent equilibrium potential at the working electrode surface has a large impact on ion pump efficiency. With this knowledge, a simple predictive model to optimize the working electrode material for delivering each specific ion or molecule of interest is designed. [ABSTRACT FROM AUTHOR]

The growing number of multicampus interdisciplinary projects in academic institutions expedites a necessity for tracking systems that provide instantly accessible data associated with devices, samples, and experimental results to all collaborators involved. This need has become particularly salient with the COVID pandemic when consequent travel restrictions have hampered in person meetings and laboratory visits. Minimizing post-pandemic travel can also help reduce carbon footprint of research activities. Here we developed a Quick Response (QR) code tracking system that integrates project management tools for seamless communication and tracking of materials and devices between multicampus collaborators: one school of medicine, two engineering laboratories, three manufacturing cleanroom sites, and three research laboratories. Here we aimed to use this system to track the design, fabrication, and quality control of bioelectronic devices, in vitro experimental results, and in vivo testing. Incorporating the tracking system into our project helped our multicampus teams accomplish milestones on a tight timeline via improved data traceability, manufacturing efficiency, and shared experimental results. This tracking system is particularly useful to track device issues and ensure engineering device consistency when working with expensive biological samples in vitro and animals in vivo to reduce waste of biological and animal resources associated with device failure. [ABSTRACT FROM AUTHOR]

Bioelectronic devices that interface electronics with biological systems can actuate and control biological processes. The potassium ion plays a vital role in cell membrane physiology, maintaining the cell membrane potential (Vmem) and generating action potentials. In this work, we present two bioelectronic ion pumps that use an electronic signal to modulate the potassium ion concentration in solution. The first ion pump is designed to integrate directly with six-well cell culture plates for optimal ease of integration with in vitro cell culture, and the second on-chip ion pump provides high spatial resolution. These pumps offer increased ease of integration with in vitro systems and demonstrate K+ concentration distribution with high spatial resolution. We systematically investigate the ion pump's performance using electrical characterization and computational modeling, and we explore closed-loop control of K+ concentration using fluorescent dyes as indicators. As a proof-of-concept, we study the effects of modulating K+ concentration on Vmem of THP-1 macrophages. [ABSTRACT FROM AUTHOR]

Organ-on-a-chip systems combine microfluidics, cell biology, and tissue engineering to culture 3D organ-specific in vitro models that recapitulate the biology and physiology of their in vivo counterparts. Here, we have developed a multiplex platform that automates the culture of individual organoids in isolated microenvironments at user-defined media flow rates. Programmable workflows allow the use of multiple reagent reservoirs that may be applied to direct differentiation, study temporal variables, and grow cultures long term. Novel techniques in polydimethylsiloxane (PDMS) chip fabrication are described here that enable features on the upper and lower planes of a single PDMS substrate. RNA sequencing (RNA-seq) analysis of automated cerebral cortex organoid cultures shows benefits in reducing glycolytic and endoplasmic reticulum stress compared to conventional in vitro cell cultures. [ABSTRACT FROM AUTHOR]

The synthesis of a positively charged and water soluble chitosan derivative from chitosan is presented. [ABSTRACT FROM AUTHOR]

In article number 2100687 by Marco Rolandi and co-workers, the ionic conductivity and microstructure of a series of polyelectrolyte hydrogels are investigated to provide simple guidance for hydrogel design. B Front Cover b : Polyelectrolyte hydrogels have received increasing attention in bioelectronics because they allow ion transport and form a conformal interface with biological tissue. [Extracted from the article]

Simultaneous longitudinal imaging across multiple conditions and replicates has been crucial for scientific studies aiming to understand biological processes and disease. Yet, imaging systems capable of accomplishing these tasks are economically unattainable for most academic and teaching laboratories around the world. Here, we propose the Picroscope, which is the first low-cost system for simultaneous longitudinal biological imaging made primarily using off-the-shelf and 3D-printed materials. The Picroscope is compatible with standard 24-well cell culture plates and captures 3D z-stack image data. The Picroscope can be controlled remotely, allowing for automatic imaging with minimal intervention from the investigator. Here, we use this system in a range of applications. We gathered longitudinal whole organism image data for frogs, zebrafish, and planaria worms. We also gathered image data inside an incubator to observe 2D monolayers and 3D mammalian tissue culture models. Using this tool, we can measure the behavior of entire organisms or individual cells over long-time periods. Ly et al. report a multi-well imaging system (the Picroscope) that can perform longitudinal bright-field z-stack imaging for 24 wells simultaneously. They demonstrate its capability by imaging zebrafish embryos, planaria worms, development of Xenopus tropicalis over a 28-h period and embryonic stem cell monolayer and organoids inside an incubator. [ABSTRACT FROM AUTHOR]

[Display omitted] • Morphology and composition of an internal shell have been studied for the first time. • The internal shell is organized in layers that control calcite nucleation and growth. • Diverse morphologies of calcite crystals were observed on the two pages of the shell. • The two faces of the shell might act as short- and long- term calcium reserve. A slug is a shell-less terrestrial gastropod mollusk. During evolution, slugs have lost their mineralized external shell but some of them have retained an internal shell (IS). Unlike external shells, which have been widely investigated, the ISs have been poorly studied. We report for the first time the compositional and complete morphological characterization of Ariolimax californicus' IS. According to literature, this shell calcifies and decalcifies depending on the animal's needs. Its composition is mostly organic, consisting of proteins and β-chitin. The internal shell is organized in layers and membranes in which CaCO 3 crystal formation occurs in specific areas. In the two faces of the IS we observed different morphologies and aggregations of calcite bio-crystals along with a different organization of the organic matrix. Dorsally, the mineral forms a thick layer composed of misaligned crystal aggregates of large dimensions, separated by thin organic layers. This suggests a protective purpose and the use of this layer as a long-term calcium storage system. Ventrally, the mineral phase is organized in small crystal aggregates of comparable size, separated by thin organic layers, and quite aligned one to the other. The whole ventral mineral layer is covered by a membrane, identified as the hypostracum. This face is proposed to be a short-term calcium storage system. In vitro crystallization experiments suggest massive calcium ions sequestration from the solution for the precipitation of calcite crystals inside the organic matrix. In conclusion, this research provides new information on the dynamic of biomineralization on mollusk evolved in calcium-poor environments. [ABSTRACT FROM AUTHOR]

A potentiostat is an essential piece of analytical equipment for studying electrochemical devices and reactions. As the design of electrochemical devices evolve, applications for systems with multiple working electrodes have become more common. These applications drive a need for low-cost multi-channel potentiostat systems. We have developed a portable, low-cost and scalable system with a modular design that can support 8 to 64 channels at a cost as low as $8 per channel. This design can replace the functionality of commercial potentiostats which cost upwards of $10k for certain applications. Each channel in the multi-channel potentiostat has an independent adjustable voltage source with a built-in ammeter and switch, making the device flexible for various configurations. The multi-channel potentiostat is designed for low current applications (nA range), but its purpose can change by varying its shunt resistor value. The system can either function as a standalone device or remotely controlled. We demonstrate the functionality of this system for the control of a 24-channel bioelectronic ion pump for open- and closed- loop control of pH. [ABSTRACT FROM AUTHOR]

Biological materials such as chiton tooth, squid beak, and byssal threads of bivalves have inspired the development of new technologies. To this end, we have characterized the acellular components in the buccal mass of the terrestrial slug Ariolimax californicus (banana slug). These components are the radula, the jaw, and the odontophore. In the radula, calcium-rich denticles are tightly interlocked one to the other on top of a nanofibrous chitin membrane. The jaw has a nanostructured morphology made of chitin to achieve compression resistance and is directly linked to the foregut cuticle, which has a protective nanofibrous structure. Finally, in the odontophore, we observed a structurally elastic microstructure that interfaces soft tissues with a highly stressed radula membrane. Based on those observations, we discuss the interaction between these components and highlight how the materials in these task-specific components have evolved. This structure-properties-function study of the A. californicus’ buccal mass may aid in the design and fabrication of novel bioinspired materials. [ABSTRACT FROM AUTHOR]

Visual design, learning sciences, and nanotechnology may be strange bedfellows; yet, as this paper highlights, peer interaction between a designer and a scientist is an effective method for helping scientists acquire visual design skills. We describe our findings from observing twelve sessions at the Design Help Desk, a tutoring center at the University of Washington. At each session, a scientist (who is expert in his own domain but a novice in design) consulted a designer (who is expert in design but a novice in science) in order to receive advice and guidance on how to improve a scientific visualization. At the Design Help Desk, this pairing consistently produced a momentary disequilibrium in the scientist’s thought process: a disequilibrium that led to agency (where the scientist gained ownership of his/her own learning) and conceptual change in the scientist’s understanding of visual design. Scientists who visited the Design Help Desk were satisfied with their experience, and their published work demonstrated an improved ability to visually communicate research findings—a skill critical to the advancement of science. To our knowledge, the Design Help Desk is a unique effort to educate scientists in visual design; we are not aware of any other design-advice/tutoring centers at public or private universities in the United States or abroad. [ABSTRACT FROM AUTHOR]

Hybrid biotic abiotic devices can be used to interface electronics with biological systems for novel therapies or to increase device functionality beyond silicon. Many strategies exist to merge the electronic and biological worlds, one dominated by electrons and holes as charge carriers, the other by ions. In the biological world, lipid bilayers and ion channels are essential to compartmentalize the cell machinery and regulate ionic fluxes across the cell membrane. Here, we demonstrate a bioelectronic device in which a lipid bilayer supported on H+-conducting Pd/PdHx contacts contains carbon nanotubes porin (CNTP) channels. This bioelectronic device uses CNTPs to control of H+ flow across the lipid bilayer with a voltage applied to the Pd/PdHx contacts. Potential applications of these devices include local pH sensing and control. [ABSTRACT FROM AUTHOR]

The top working electrode (WE) interfaces with the source solution, while the bottom reference/counter electrode (RE/CE) interfaces with the target solution. Bioelectronics, electrode materials, ion delivery, ion pumps, ions and biomolecules Keywords: bioelectronics; electrode materials; ion delivery; ion pumps; ions and biomolecules EN bioelectronics electrode materials ion delivery ion pumps ions and biomolecules 1 1 1 07/14/23 20230710 NES 230710 B Bioelectronic Ion Pumps b An example of an ion pump for delivering therapeutic ions and biomolecules is demonstrated in article 2201996, by Marco Rolandi and co-workers. [Extracted from the article]

Racemates often have lower solubility than enantiopure compounds, and the mixing of enantiomers can enhance the aggregation propensity of peptides. Amyloid beta (Aβ) 42 is an aggregation-prone peptide that is believed to play a key role in Alzheimer's disease. Soluble Aβ42 aggregation intermediates (oligomers) have emerged as being particularly neurotoxic. We hypothesized that the addition of mirror-image d-Aβ42 should reduce the concentration of toxic oligomers formed from natural l-Aβ42. We synthesized l- and D-Aβ42 and found their equimolar mixing to lead to accelerated fibril formation. Confocal microscopy with fluorescently labeled analogues of the enantiomers showed their colocalization in racemic fibrils. Owing to the enhanced fibril formation propensity, racemic Aβ42 was less prone to form soluble oligomers. This resulted in the protection of cells from the toxicity of l-Aβ42 at concentrations up to 50 μ m. The mixing of Aβ42 enantiomers thus accelerates the formation of non-toxic fibrils. [ABSTRACT FROM AUTHOR]

Racemates often have lower solubility than enantiopure compounds, and the mixing of enantiomers can enhance the aggregation propensity of peptides. Amyloid beta (Aβ) 42 is an aggregation-prone peptide that is believed to play a key role in Alzheimer's disease. Soluble Aβ42 aggregation intermediates (oligomers) have emerged as being particularly neurotoxic. We hypothesized that the addition of mirror-image d-Aβ42 should reduce the concentration of toxic oligomers formed from natural l-Aβ42. We synthesized l- and D-Aβ42 and found their equimolar mixing to lead to accelerated fibril formation. Confocal microscopy with fluorescently labeled analogues of the enantiomers showed their colocalization in racemic fibrils. Owing to the enhanced fibril formation propensity, racemic Aβ42 was less prone to form soluble oligomers. This resulted in the protection of cells from the toxicity of l-Aβ42 at concentrations up to 50 μ m. The mixing of Aβ42 enantiomers thus accelerates the formation of non-toxic fibrils. [ABSTRACT FROM AUTHOR]

This article focuses on the miniature organic transistors with carbon nantotubes as quasi-one dimensional eletrodes. Small organic molecules and conjugated polymers can be easily processed to afford functional electronics such as field effect transistors (FETs), and in principle, scalingtm to single-molecule-long devices could circumvent the low carrier mobility problem for these materials to afford high performance ballistic FETs. For highly scaled molecular transistors with short channels, however, it is crucial to develop novel device geometries to optimize gate electrostatics needed for efficient ON/OFF switching.

Theelectrical properties of eumelanin, a ubiquitous natural pigment,have fascinated scientists since the late 1960s. For several decades,the hydration-dependent electrical properties of eumelanin have mainlybeen interpreted within the amorphous semiconductor model. Recentworks undermined this paradigm. Here we study protonic and electroniccharge carrier transport in hydrated eumelanin in thin film form.Thin films are ideal candidates for these studies since they are readilyaccessible to chemical and morphological characterization and potentiallyamenable to device applications. Current–voltage (I-V) measurements, transient current measurementswith proton-transparent electrodes, and electrochemical impedancespectroscopy (EIS) measurements are reported and correlated with theresults of the chemical characterization of the films, performed byX-ray photoelectron spectroscopy. We show that the electrical responseof hydrated eumelanin films is dominated by ionic conduction (10–4–10–3S cm–1), largely attributable to protons, and electrochemical processes.To propose an explanation for the electrical response of hydratedeumelanin films as observed by EIS and I-V, we considered the interplay of proton migration, redoxprocesses, and electronic transport. These new insights improve thecurrent understanding of the charge carrier transport properties ofeumelanin opening the possibility to assess the potential of eumelaninfor organic bioelectronic applications, e.g. protonic devices andimplantable electrodes, and to advance the knowledge on the functionsof eumelanin in biological systems. [ABSTRACT FROM AUTHOR]

Proton conduction is essential in biological systems. Oxidative phosphorylation in mitochondria, proton pumping in bacteriorhodopsin, and uncoupling membrane potentials by the antibiotic Gramicidin are examples. In these systems, H+ hop along chains of hydrogen bonds between water molecules and hydrophilic residues - proton wires. These wires also support the transport of OH- as proton holes. Discriminating between H+ and OH- transport has been elusive. Here, H+ and OH- transport is achieved in polysaccharide- based proton wires and devices. A H+-OH- junction with rectifying behaviour and H+-type and OH--type complementary field effect transistors are demonstrated. We describe these devices with a model that relates H+ and OH- to electron and hole transport in semiconductors. In turn, the model developed for these devices may provide additional insights into proton conduction in biological systems [ABSTRACT FROM AUTHOR]

Continuous glucose monitoring from sweat and tears can improve the quality of life of diabetic patients and provide data for more accurate diagnosis and treatment. Current continuous glucose sensors use enzymes with a one-to-two week lifespan, which forces periodic replacement. Metal oxide sensors are an alternative to enzymatic sensors with a longer lifetime. However, metal oxide sensors do not operate in sweat and tears because they function at high pH (pH > 10), and sweat and tears are neutral (pH = 7). Here, we introduce a non-enzymatic metal oxide glucose sensor that functions in neutral fluids by electronically inducing a reversible and localized pH change. We demonstrate glucose monitoring at physiologically relevant levels in neutral fluids mimicking sweat, and wireless communication with a personal computer via an integrated circuit board. [ABSTRACT FROM AUTHOR]

Bioelectronic devices that modulate pH can affect critical biological processes including enzymatic activity, oxidative phosphorylation, and neuronal excitability. A major challenge in controlling pH is the high buffering capacity of many biological media. To overcome this challenge, devices need to be able to store and deliver a large number of protons on demand. Here, a bioelectronic modulator that controls pH using palladium nanoparticles contacts with high surface area as a proton storage medium is developed. Reversible electronically triggered acidosis (low pH) and alkalosis (high pH) in physiologically relevant buffer conditions are achieved. As a proof of principle, this new platform is used to control the degradation and fluorescence of acid sensitive polymeric microparticles loaded with a pH sensitive fluorescent dye. A bioelectronic modulator controls pH using palladium nanoparticle contacts as a proton storage medium. This powerful tool achieves reversible electronically triggered acidosis and alkalosis in physiologically relevant buffer conditions. [ABSTRACT FROM AUTHOR]

In article number 1800935, Marco Rolandi and co‐workers present a bioelectronic proton pump based on palladium hydride that changes pH in physiological conditions. [ABSTRACT FROM AUTHOR]

Bioelectronic devices that modulate pH can affect critical biological processes including enzymatic activity, oxidative phosphorylation, and neuronal excitability. A major challenge in controlling pH is the high buffering capacity of many biological media. To overcome this challenge, devices need to be able to store and deliver a large number of protons on demand. Here, a bioelectronic modulator that controls pH using palladium nanoparticles contacts with high surface area as a proton storage medium is developed. Reversible electronically triggered acidosis (low pH) and alkalosis (high pH) in physiologically relevant buffer conditions are achieved. As a proof of principle, this new platform is used to control the degradation and fluorescence of acid sensitive polymeric microparticles loaded with a pH sensitive fluorescent dye. [ABSTRACT FROM AUTHOR]

The article presents a study that proposes electrochemical scanning probe lithography (SPL) method for patterning amine and oxygen-rich species in a monolayer surface. The study assesses SPL patterning in Benzoquinone- modified and trimethylbenzoquinon-based surfaces through doped silicon contact and atomic force microscope (AFM)-based oxidative methods, respectively. Result shows efficiency of electrochemical SPL for typical amine chemistry; however, its oxidative patterning was unsuccessful.

The article presents information on the development of a chemical patterning method through the investigation of nitrene insertions in carbon nanotubes.