Search

Background: Asthma affects 3% of the global population, leading to over 0.25 million deaths. Due to its complexity, asthma is difficult to cure or prevent, and current therapies have limitations. This has led to a growing demand for alternative asthma treatments. We found rosmarinic acid (RosA) as a potential new drug candidate from natural medicine. However, RosA has poor bioavailability and remains mainly in the gastrointestinal tract after oral administration, suggesting the involvement of gut microbiota in its bioactivity., Purpose: To investigate the mechanism of RosA in alleviating allergic asthma by gut-lung axis., Methods: We used 16S rRNA gene sequencing and metabolites analysis to investigate RosA's modulation of gut microbiota. Techniques of molecular biology and metabolomics were employed to study the pharmacological mechanism of RosA. Cohousing was used to confirm the involvement of gut microbiota in RosA-induced improvement of allergic asthma., Results: RosA decreased cholate levels from spore-forming bacteria, leading to reduced 5-hydroxytryptamine (5-HT) synthesis, bronchoconstriction, vasodilation, and inflammatory cell infiltration. It also increased short-chain fatty acids (SCFAs) levels, facilitating the expression of intestinal tight junction proteins to promote intestinal integrity. SCFAs upregulated intestinal monocarboxylate transporters (MCTs), thereby improving their systemic delivery to reduce Th2/ILC2 mediated inflammatory response and suppress eosinophil influx and mucus production in lung. Additionally, RosA inhibited lipopolysaccharide (LPS) production and translocation, leading to reduced TLR4-NFκB mediated pulmonary inflammation and oxidative stress., Conclusions: The anti-asthmatic mechanism of oral RosA is primarily driven by modulation of gut microbiota-derived 5-HT, SCFAs, and LPS, achieving a combined synergistic effect. RosA is a safe, effective, and reliable drug candidate that could potentially replace glucocorticoids for asthma treatment., Competing Interests: Declaration of competing interest The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest, and all authors report no conflicts of interest in this work., (Copyright © 2024. Published by Elsevier GmbH.)

Resolvin (Rv) and lipoxin (Lx) play important regulative roles in the development of several inflammation-related diseases. The dysregulation of their metabolic network is believed to be closely related to the occurrence and development of asthma. The Hyssopus Cuspidatus Boriss extract (SXCF) has long been used as a treatment for asthma, while the mechanism of anti-inflammatory and anti-asthma action targeting Rv and Lx has not been thoroughly investigated. In this study, we aimed to investigate the effects of SXCF on Rv, Lx in ovalbumin (OVA)-sensitized asthmatic mice. The changes of Rv, Lx before and after drug administration were analyzed based on high sensitivity chromatography-multiple response monitoring (UHPLC-MRM) analysis and multivariate statistics. The pathology exploration included behavioral changes of mice, IgE in serum, cytokines in BALF, and lung tissue sections stained with H&E. It was found that SXCF significantly modulated the metabolic disturbance of Rv, Lx due to asthma. Its modulation effect was significantly better than that of dexamethasone and rosmarinic acid which is the first-line clinical medicine and the main component of Hyssopus Cuspidatus Boriss, respectively. SXCF is demonstrated to be a potential anti-asthmatic drug with significant disease-modifying effects on OVA-induced asthma. The modulation of Rv and Lx is a possible underlying mechanism of the SXCF effects., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interest., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Background: With the continuous development and progress of medical technology, the position of surgical nursing in the field of clinical medicine is becoming increasingly prominent. As an important branch of the surgical field, the nursing requirements and difficulty of gastrointestinal surgery are also increasing. In order to improve the teaching quality of nursing care in gastrointestinal surgery, many educators and researchers are actively exploring new teaching methods. Among them, the teaching method case-based learning (CBL), scene-simulated learning (SSL), task-based learning (TBL), combining self-evaluation and training mode is considered as an effective method. This method aims to help students to better master knowledge and skills and improve their comprehensive quality by cultivating their self-evaluation ability., Aim: To explore the practical effect of CBL-SSL-TBL combined with training mode and student self-assessment in nursing teaching of gastrointestinal surgery., Methods: Seventy-one nursing interns in our hospital from December 2020 to December 2021 were selected. According to different teaching modes, they were divided into observation group CBL-SSL-TBL combined with training mode combined with student self-assessment and control group (conventional teaching mode), of which 36 were in observation group and 35 were in control group. The results of operational skills, theoretical knowledge, nursing students' satisfaction, learning effectiveness questionnaire and teaching effect were compared between the two groups., Results: Compared between the two groups, the operational skills and theoretical knowledge scores of the observation group were higher than those of the control group, and the difference was statistically significant ( P < 0.05). Compared between the two groups, the total satisfaction ratio of the observation group was higher than that of the control group, the difference was statistically significant ( P < 0.05). Compared between the two groups, the observation group was lower than the control group in the questionnaire results of learning efficacy, and the difference was statistically significant ( P < 0.05). Compared between the two groups, the proportion of thinking ability, subjective initiative and understanding of theoretical knowledge in the observation group was higher than that in the control group, the difference was statistically significant ( P < 0.05)., Conclusion: The use of CBL-SSL-TBL combined with training mode and student self-assessment in gastrointestinal surgery nursing teaching can improve the operational skills of nursing interns, theoretical knowledge and satisfaction scores of nursing students, improve the results of learning efficiency questionnaire and teaching effect, which can be popularized in clinical teaching., Competing Interests: Conflict-of-interest statement: All the authors report no relevant conflicts of interest for this article., (©The Author(s) 2024. Published by Baishideng Publishing Group Inc. All rights reserved.)

Continuously hyperglycation-induced lesion and poor blood flow contributed to the wound incurable and susceptible to infection. About fifteen percent of people with diabetes would develop ulcers during their lifetime, especially on the feet, which could lead to severe tissue destruction and eventual amputation. Various strategies were limited to accelerate wound healing in diabetic patients for high cost and unsatisfied effects. Geniposide is well-known for its anti-inflammation and anti-apoptosis in several pathological tissues. This study is to explore the protective effect of geniposide on wound healing rate, inflammatory response, nutritional function and cellular apoptosis in diabetic rats. Diabetic rats was induced by streptozotocin and defined as plasma glucose >300 mg/dl. Western blot and immunostaining technologies were performed to mark and quantify the target proteins. The oral administration of geniposide (200 mg/kg and 500 mg/kg) could significantly promote wound healing by the increment of lesion retraction in diabetic rats compared to model group. In the apoptotic study of skin wound in diabetic rats, the TUNEL-positive cells were greatly decreased in geniposide subgroups (P < 0.05). The levels of TNF-α, IL-1β and IL-6 were significantly inhibited by geniposide with the IC 50 value of 470 mg/kg, 464 mg/kg and 370 mg/kg body weight respectively, which might be related to the enhancement of the phosphorylation of PI3K and Akt proteins. Geniposide enhanced the repairment of skin wound in diabetic rats by inhibiting inflammatory response and apoptosis., Competing Interests: All authors declared no competing interests in this work., (© 2023 The Authors.)

A method for estimating peak skin dose (PSD) from CTDI vol has been published but not validated. The objective of this study was to validate this method during CT-guided ablation procedures. Radiochromic film was calibrated and used to measure PSD. Sixty-eight patients were enrolled in this study, and measured PSD were collected for 46 procedures. CTDI vol stratified by axial and helical scanning was used to calculate an estimate of PSD using the method [1.2 × CTDI vol (helical) + 0.6 × CTDI vol (axial)], and both calculated PSD and total CTDI vol were compared to measured PSD using paired t-tests on the log-transformed data and Bland-Altman analysis. Calculated PSD were significantly different from measured PSD (P < 0.0001, bias, 18.3%, 95% limits of agreement, -63.0% to 26.4%). Measured PSD were not significantly different from total CTDI vol (P = 0.27, bias, 3.97%, 95% limits of agreement, -51.6% to 43.7%). Considering that CTDI vol is reported on the console of all CT scanners, is not stratified by axial and helical scanning modes, and is immediately available to the operator during CT-guided interventional procedures, it may be reasonable to use the scanner-reported CTDI vol as an indicator of PSD during CT-guided procedures. However, further validation is required for other models of CT scanner., (© 2021 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.)

Feedback from radiologists indicated that differences in image appearance and noise impeded reading of post-contrast computed tomography (CT) scans from an updated CT scanner that was recently added to a fleet of existing scanners from the same vendor, despite using identically named reconstruction algorithms. The goals of this work were to quantify and possibly standardize image quality on the new and an existing scanner using phantom images. Three months of daily quality control images were analyzed to determine the mean CT number and noise magnitude in a water phantom. Next, subtraction images from the uniformity section of an American College of Radiology CT phantom were used to generate noise power spectra for both scanners. Then, a semi-anthropomorphic liver phantom was imaged with both scanners in triplicate using identical body protocols to quantify differences CT number and noise magnitude. Finally, the scanner dependence of CT number and noise magnitude on material attenuation was quantified using a multi-energy CT phantom with 15 material inserts. Significant differences between scanners were determined using a paired or Welch's t test as appropriate. In daily quality control images, the new scanner exhibited slightly higher CT number (0.697 vs. 0.412, P < 0.001, n = 85) and slightly lower noise magnitude (4.85 vs. 4.94, P < 0.001, n = 85). Measured NPS was not significantly different between the existing and new scanners. Interestingly, it was observed that the noise magnitude from the new scanner increased with increasing material attenuation in both the liver (P = 0.008) and multi-energy (P < 0.001) phantoms. Using an alternate reconstruction algorithm with the new scanner eliminated this deviation at high material attenuations. While standard noise evaluation in a water phantom was unable to discern differences between the scanners, more comprehensive testing with higher attenuation materials allowed for the characterization and homogenization of image quality., (© 2019 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.)

Vibrio rotiferianus is an important marine pathogen of various aquatic organisms and can be found widely distributed in the marine environment. To further characterize this pathogen, the pathogenic properties and genome of V. rotiferianus SSVR1601 isolated from Sebastes schlegelii with skin ulcer were analysed. SSVR1601 was shown to be short rod-shaped cell with a single polar flagellum. Different degrees of pathological changes in fish kidney, intestine, gills and liver were observed after SSVR1601 challenge. The SSVR1601 genome consists of two chromosomes and two plasmids with a total of 5,717,113 bp, 42.04%-44.93% GC content, 5,269 predicted CDSs, 134 tRNAs and 40 rRNAs. The common virulence factors including OMPs, haemolysin, flagellin, DNase, entF, algU, tcpI, acfB and rfaD were found in strain SSVR1601. Furthermore, factors responsible for iron uptake (fur, fepC and ccmC) and types II, IV and VI secretion systems were detected, which are likely responsible for the pathogenicity of SSVR1601. The antimicrobial resistance genes, bacA, tet34 and norM, were detected based on Antibiotic Resistance Genes Database. The phylogenetic analysis revealed SSVR1601 to be most closely related to V. rotiferianus strains CAIM577 and B64D1., (© 2019 John Wiley & Sons Ltd.)

This study aimed to determine the effects of Androstenodione (AED) on the transcriptional expression of genes involved in the hypothalamic-pituitary-gonadal (HPG) and the hypothalamic-pituitary-adrenal (HPA) axes in the zebrafish embryos/larvae. Zebrafish embryos were exposed to 0, 4.0, 45.0, 487.0, and 980.0 ng/L of AED from the day of fertilization to 144 h post fertilization (hpf), during which the transcriptional profiles of key genes related to the HPG and HPA axes were examined daily using quantitative real-time PCR. The AED exposure significantly up-regulated several receptor signaling pathways and the key genes involved in various steps of the steroidogenic pathways were also affected. In addition, the AED exposure could significantly modulate the transcriptional profiles of the other target genes related to hypothalamic and pituitary hormones. The findings of this study suggest that AED, at environmentally relevant concentrations, affects the adrenal endocrine systems and the reproduction of zebrafish by interrupting the HPG and HPA axes., (Copyright © 2018. Published by Elsevier Inc.)

Objective: The aim of this study was to investigate the noise power properties of a micro-computed tomography (micro-CT) system under different operating conditions., Methods: A commercial micro-CT was used in the study that used a flat panel detector with a 127-μm-pixel pitch and a micro-focus x-ray tube. Conical tubes of various diameters were used under different acquisition conditions. Multidimensional noise power spectrums were used as a metric to investigate the noise properties of the system. Noise power spectrum was calculated from the difference data generated by subtraction of 2 identical scans. The noise properties with respect to various parameters that include the impact of number of projections, x-ray spectra, milliampere-second, slice location, object diameter, voxel size, geometric magnification (M), back-projection filters, and reconstruction magnification (Mrecon) were studied., Results: At a same isocentric exposure rate of 270 mR/s, the noise power was much lower for the image reconstructed with 3672 views (122 seconds) as compared with the 511 views (17 seconds), whereas at a fixed isocentric exposure of 4600 mR, the noise power levels were almost similar. Image noise with a 50-kV beam was higher as compared with the 90-kV beam at a same isocentric exposure. Image noise from a 16-mm-diameter conical tube was much lower as compared with the 28- and 56-mm tubes under identical isocentric exposures. The choice of back-projection filter influences noise power spectrum curves in terms of width and amplitudes. Reconstruction magnification applied during the reconstruction process increased the noise power at lower spatial frequencies but reduced the noise power at higher spatial frequencies. It can be established that, for small details corresponding to high spatial frequencies, reconstruction magnification can provide an improved signal-to-noise ratio. At all spatial frequencies, the in-plane images had lower noise power levels as compared with the z-plane images., Conclusions: The noise power properties investigated in this study provide important image quality references for refined cone beam system development, optimization, and operations.

To evaluate the feasibility of radiation dose reduction using model-based iterative reconstruction (MBIR) for evaluating the ureters and vasculature in a phantom, a tissue-equivalent CT dose phantom was scanned using a 64-channel CT scan-ner. Tubes of varying diameters filled with different dilutions of a contrast agent, simulating ureters or vessels, were inserted into the center of the phantom. Each combination was scanned using an existing renal protocol at 140 kVp or 120 kVp, yielding a display volumetric CT dose index (CTDIvol) of 24 mGy. The scans were repeated using reduced scan techniques to achieve lower radiation doses down to 0.8 mGy. The images were reconstructed using filtered back-projection (FBP) and model-based iterative reconstruction (MBIR). The noise and contrast-to-noise ratio (CNR) was measured for each contrast object. Comparisons between the two reconstruction methods at different dose levels were evaluated using a factorial design. At each CTDIvol the measured image noise was lower using MBIR compared to FBP (p < 0.0001). At low doses, the percent change in measured image noise between FBP and MBIR was larger. For the 12 mm object simulating a ureter or large vessel with an HU of 600, the measured CNR using MBIR at a CTDIvol of 1.7 mGy was greater than the CNR of FBP at a CTIDvol of 24 mGy (p < 0.0001). For the 5 mm object simulating a medium-sized vessel with a HU of 250, the mea-sured CNR using MBIR at a CTDIvol of 1.7 mGy was equivalent to that of FBP at a CTDIvol of 24 mGy. For the 2 mm, 100 HU object simulating a small vessel, the measured CNR using MBIR at a CTDIvol of 1.7 mGy was equivalent to that of FBP at a CTDIvol of 24 mGy. Low-dose (3.6 mGy) CT imaging of vasculature and ureter phantoms using MBIR results in similar noise and CNR compared to FBP at approximately one-sixth the dose. This suggests that, using MBIR, a one milliSievert exam of the ureters and vasculature may be clinically possible whilst still maintaining adequate image quality., (© 2016 The Authors.)

The purpose of this study was to evaluate performance of the third generation of model-based iterative reconstruction (MBIR) system, Veo 3.0, based on noise power spectrum (NPS) analysis with various clinical presets over a wide range of clinically applicable dose levels. A CatPhan 600 surrounded by an oval, fat-equivalent ring to mimic patient size/shape was scanned 10 times at each of six dose levels on a GE HD 750 scanner. NPS analysis was performed on images reconstructed with various Veo 3.0 preset combinations for comparisons of those images reconstructed using Veo 2.0, filtered back projection (FBP) and adaptive statistical iterative reconstruc-tion (ASiR). The new Target Thickness setting resulted in higher noise in thicker axial images. The new Texture Enhancement function achieved a more isotropic noise behavior with less image artifacts. Veo 3.0 provides additional reconstruction options designed to allow the user choice of balance between spatial resolution and image noise, relative to Veo 2.0. Veo 3.0 provides more user selectable options and in general improved isotropic noise behavior in comparison to Veo 2.0. The overall noise reduction performance of both versions of MBIR was improved in comparison to FBP and ASiR, especially at low-dose levels., (© 2016 The Authors.)

The purpose of this study was to characterize image quality and dose performance with GE CT iterative reconstruction techniques, adaptive statistical iterative recontruction (ASiR), and model-based iterative reconstruction (MBIR), over a range of typical to low-dose intervals using the Catphan 600 and the anthropomorphic Kyoto Kagaku abdomen phantoms. The scope of the project was to quantitatively describe the advantages and limitations of these approaches. The Catphan 600 phantom, supplemented with a fat-equivalent oval ring, was scanned using a GE Discovery HD750 scanner at 120 kVp, 0.8 s rotation time, and pitch factors of 0.516, 0.984, and 1.375. The mA was selected for each pitch factor to achieve CTDIvol values of 24, 18, 12, 6, 3, 2, and 1 mGy. Images were reconstructed at 2.5 mm thickness with filtered back-projection (FBP); 20%, 40%, and 70% ASiR; and MBIR. The potential for dose reduction and low-contrast detectability were evaluated from noise and contrast-to-noise ratio (CNR) measurements in the CTP 404 module of the Catphan. Hounsfield units (HUs) of several materials were evaluated from the cylinder inserts in the CTP 404 module, and the modulation transfer function (MTF) was calculated from the air insert. The results were con-firmed in the anthropomorphic Kyoto Kagaku abdomen phantom at 6, 3, 2, and 1mGy. MBIR reduced noise levels five-fold and increased CNR by a factor of five compared to FBP below 6mGy CTDIvol, resulting in a substantial improvement in image quality. Compared to ASiR and FBP, HU in images reconstructed with MBIR were consistently lower, and this discrepancy was reversed by higher pitch factors in some materials. MBIR improved the conspicuity of the high-contrast spatial resolution bar pattern, and MTF quantification confirmed the superior spatial resolution performance of MBIR versus FBP and ASiR at higher dose levels. While ASiR and FBP were relatively insensitive to changes in dose and pitch, the spatial resolution for MBIR improved with increasing dose and pitch. Unlike FBP, MBIR and ASiR may have the potential for patient imaging at around 1 mGy CTDIvol. The improved low-contrast detectability observed with MBIR, especially at low-dose levels, indicate the potential for considerable dose reduction.

Background: Cross-sectional imaging techniques as magnetic resonance enterography (MRE) may offer additional information on transmural inflammation, stricturing and fistulising complications in Crohn's disease (CD). The purpose of our study was to evaluate the diagnostic accuracy of Magnetic Resonance Imaging (MRI) combined with Diffusion-weighted Imaging (DWI) and MRE for determination of inflammation in small bowel CD., Methods: MR imaging examination was performed with a GE Signa EXCITE 3.0 T MRI scanner. The optimal b value in DWI with a learning cohort of patients was determined. The diagnostic accuracy for active lesions and disease activity were accessed by MRE combined with DWI., Results: The b value 800 s/mm(2) group showed the highest diagnostic sensitivity (74.19%) for diagnostic assessment of active Crohn's lesions on DWI. MRE combined with DWI showed the highest sensitivity (93.55%), specificity (89.47%) and diagnostic accuracy (92%) compared with MRE or DWI alone. The segmental MR score (MR-score-S) showed a significantly positive correlation with the Capsule Endoscopy Crohn's Disease Activity Index Score (CECDAI-S) (r = 0.717, p < 0.01). The total MR score (MR-score-T) showed significant association with C-reactive protein (CRP) (r = 0.445, p = 0.019) and erythrocyte sedimentation rate (ESR) (r = 0.688, p < 0.01)., Conclusions: MRE combined with DWI improves the diagnostic accuracy for active lesions and correlates the endoscopic disease activity. MRE with DWI could represent a non-invasive tool in assessing active inflammation in CD.

The purpose of this study was to compare the resulting full width at half maximum of slice sensitivity profiles (SSP) generated by several commercially available point response phantoms, and determine an appropriate imaging technique and analysis method. Four CT phantoms containing point response objects designed to produce a delta impulse signal used in this study: a Fluke CT-SSP phantom, a Gammex 464, a CatPhan 600, and a Kagaku Micro Disc phantom. Each phantom was imaged using 120 kVp, 325 mAs, head scan field of view, 32 × 0.625 mm helical scan with a 20 mm beam width and a pitch of 0.969. The acquired images were then reconstructed into all available slice thicknesses (0.625 mm - 5.0 mm). A computer program was developed to analyze the images of each dataset for generating a SSP from which the full width at half maximum (FWHM) was determined. Two methods for generating SSPs were evaluated and compared by choosing the mean vs. maximum value in the ROI, along with two methods for evaluating the FWHM of the SSP, linear interpolation and Gaussian curve fitting. FWHMs were compared with the manufacturer's specifications using percent error and z-test with a significance value of p < 0.05. The FWHMs from each phantom were not significantly different (p ≥ 0.089) with an average error of 3.5%. The FWHMs from SSPs generated from the mean value were statistically different (p ≤ 3.99 × 10¹³). The FWHMs from the different FWHM methods were not statistically different (p ≤ 0.499). Evaluation of the SSP is dependent on the ROI value used. The maximum value from the ROI should be used to generate the SSP whenever possible. SSP measurement is independent of the phantoms used in this study.

We investigated the genetic diversity of the southern flounder Paralichthys lethostigma. Microsatellite-enriched libraries were constructed and novel microsatellite markers were developed and applied for genetic detection of wild populations. Cross-species amplification was also conducted in five pleuronectiforme species. Of 45 randomly selected and sequenced clones, 43 contained a CA or GA repeat motif. Fourteen pairs of primers were designed to investigate the polymorphism and genetic structure of a wild population collected from North Carolina State coastal waters. Two loci were monomorphic and 12 loci were polymorphic. The number of alleles per polymorphic locus ranged from 2 to 16, with an average of 7.3, and the expected heterozygosity per locus ranged from 0.10 to 0.92, with an average of 0.58. Cross-species amplification showed that most of the markers could successfully amplify Paralichthys olivaceus DNAs, few markers amplified in Verasper variegatus and Verasper moseri, and none of them could amplify Scophthatmus maximus and Cynoglossus semilaevis DNAs. The isolated polymorphic markers would be useful for the genetic breeding and assessment of genetic variation within the genus Paralichthys.

Coilia ectenes (Jordan and Seale 1905) is an important anadromous species that is an important resource at risk of extinction because of over-fishing, pollution, and coastal construction. To evaluate the genetic diversity of C. ectenes for use in breeding programs, elite microsatellite-enriched libraries were constructed and novel microsatellite markers were developed, and applied to genetically detect wild populations. Out of 92 randomly selected and sequenced clones, 89 contained a CA or GA repeat motif. Twenty-two pairs of primers were designed to investigate the polymorphism and genetic structure of a wild population collected from the Yellow River estuary, China. It was found that 2 loci were monomorphic and 20 loci were polymorphic. The number of alleles per polymorphic loci ranged from 3 to 13, with an average of 7.9. The expected heterozygosity per locus ranged from 0.05 to 0.89, with an average of 0.68. The isolated polymorphic markers are expected to be of use in future genetic breeding programs for C. ectenes, and in the assessment of genetic variation within this species.

Objective: To measure surface skin dose from various cone-beam computed tomography (CBCT) scanners using point-dosimeters., Materials & Methods: A head anthropomorphic phantom was used with nanoDOT optically stimulated luminescence (OSL) dosimeters (Landauer Corp., Glenwood, IL) attached to various anatomic landmarks. The phantom was scanned using multiple exposure protocols for craniofacial evaluations in three different CBCT units and a conventional x-ray imaging system. The dosimeters were calibrated for each of the scan protocols on the different imaging systems. Peak skin dose and surface doses at the eye lens, thyroid, submandibular and parotid gland levels were measured., Results: The measured skin doses ranged from 0.09 to 4.62 mGy depending on dosimeter positions and imaging systems. The average surface doses to the lens locations were ~4.0 mGy, well below the threshold for cataractogenesis (500 mGy). The results changed accordingly with x-ray tube output (mAs and kV) and also were sensitive to scan field of view (SFOV). As compared to the conventional panoramic and cephalometric imaging system, doses from all three CBCT systems were at least an order of magnitude higher., Conclusions: Peak skin dose and surface doses at the eye lens, thyroid, and salivary gland levels measured from the CBCT imaging systems were lower than the thresholds to induce deterministic effects. However, our findings do not justify the routine use of CBCT imaging in orthodontics considering the lifetime-attributable risk to the individual.

Squamous cell lung cancer is a major histotype of non-small cell lung cancer (NSCLC) that is distinct from lung adenocarcinoma. We used whole-exome sequencing to identify novel non-synonymous somatic mutations in squamous cell lung cancer. We identified 101 single-nucleotide variants (SNVs) including 77 non-synonymous SNVs (67 missense and 10 nonsense mutations) and 11 INDELs causing frameshifts. We also found four SNVs located within splicing sites. We verified 62 of the SNVs (51 missense, 10 nonsense and 1 splicing-site mutation) and 10 of the INDELs as somatic mutations in lung cancer tissue. Sixteen of the mutated genes were also mutated in at least one patient with a different type of lung cancer in the Catalogue of Somatic Mutation in Cancer (COSMIC) database. Four genes (LPHN2, TP53, MYH2 and TGM2) were mutated in approximately 10% of the samples in the COSMIC database. We identified two missense mutations in C10orf137 and MS4A3 that also occurred in other solid-tumor tissues in the COSMIC database. We found another somatic mutation in EP300 that was mutated in 4.2% of the 2,020 solid-tumor samples in the COSMIC database. Taken together, our results implicate TP53, EP300, LPHN2, C10orf137, MYH2, TGM2 and MS4A3 as potential driver genes of squamous cell lung cancer.

The risks and benefits of using computed tomography (CT) as opposed to another imaging modality to accomplish a particular clinical goal should be weighed carefully. To accurately assess radiation risks and keep radiation doses as low as reasonably achievable, radiologists must be knowledgeable about the doses delivered during various types of CT studies performed at their institutions. The authors of this article propose a process improvement approach that includes the estimation of effective radiation dose levels, formulation of dose reduction goals, modification of acquisition protocols, assessment of effects on image quality, and implementation of changes necessary to ensure quality. A first step toward developing informed radiation dose reduction goals is to become familiar with the radiation dose values and radiation-associated health risks reported in the literature. Next, to determine the baseline dose values for a CT study at a particular institution, dose data can be collected from the CT scanners, interpreted, tabulated, and graphed. CT protocols can be modified to reduce overall effective dose by using techniques such as automated exposure control and iterative reconstruction, as well as by decreasing the number of scanning phases, increasing the section thickness, and adjusting the peak voltage (kVp setting), tube current-time product (milliampere-seconds), and pitch. Last, PDSA (plan, do, study, act) cycles can be established to detect and minimize negative effects of dose reduction methods on image quality.

Objective: Studying the proven and probable invasive pulmonary aspergillosis (IPA) cases of some hospitals in Shanghai to provide evidence for the improvement of IPA clinical diagnosis and therapy., Methods: Forty-nine IPA cases were retrospectively analyzed for demography data, host factors, underlying conditions, chest CT, microorganism and histopathology examination, as well as therapy and clinical outcome., Results: Of 49 subjects including 19 (38.8%) proven and 30 (61.2%) probable IPA, 3 patients (6.1%) had no host factors, 25 patients (51.0%) had IPA associated host factors and underlying conditions, while 21 patients (42.9%) had uncertain fundamental diseases. Chest CT evaluation demonstrated that radiological lesions include nodules in 29 patients, patching in 15, mass in 12, consolidation in 10, cavitation in 34, Halo sign in 19, air bronchogram in 18, crescentic sign in 6, bilateral in 33 and multifocal lesions in 38. The yielding rate of fungus culture in sputum was 26.5% (13/49), and in bronchoalveolar lavage fluid was 66.7% (10/15). Eleven of thirty-six patients (30.6%) had positive results of serum galactomannan antigen tests. Nineteen of twenty-one patients (90.5%) were proven as IPA by lung histologic examinations. Aspergillus fumigatus was the most common pathogen 81.0% (17/21). The responding rate to initial anti-fungus therapy was 50% (21/42)., Conclusion: Our study suggests that in IPA patients, bilateral, multifocal and nodular lesion could be the most common radiological characteristic, while Halo and crescentic sign occur occasionally. Invasive technologies are more valuable to IPA diagnosis.

The purpose of this study was to evaluate the use of digital x-ray imaging detectors for the measurement of diagnostic x-ray tube focal spot size using a slit camera. Slit camera images of two focal spots for a radiographic x-ray tube were acquired with direct-exposure film (DF) (as specified by the National Electrical Manufacturers Association [NEMA] Standards Publication No. XR 5, 1992), computed radiography (CR) imaging plates, and an a-Si:H/CsI:Tl-based flat-panel (FP) detector. Images obtained with the CR and the FP were acquired over a broad range of detector entrance exposure levels. The DF slit images were evaluated according to NEMA specifications (visually, using a 7x magnifying glass with reticule) by six medical physicists. Additionally, the DF images were digitized and the focal spot sizes obtained from the digital profiles of the slit. The CR and the FP images were analyzed in a manner similar to the digitized DF images. It took less than 20 minutes for a complete CR or FP measurement of focal spot size in two dimensions. In comparison, a typical DF measurement with visual evaluation takes at least 60 minutes, in our experience. In addition to a great reduction in measurement time achieved by using digital detectors, the tube loading requirements were reduced to approximately 20 mAs compared with approximately 1000 mAs when using the DF technique. The calculated focal spot sizes for CR and FP differed from those of digitized DF by -2.4% to +4.8% (sigma=2.5%), far less than the -16.6% to +9.3% (sigma=8.1%) variability introduced by the visual evaluation of the slit image. In addition, the calculated focal spot sizes for the CR and the FP images maintained a coefficient of variation <1.0% over the broad range of exposure levels. Based upon these results, we conclude that (1) FP and CR detectors yield consistent results in measurements of x-ray tube focal spot sizes, (2) compared to DF, CR and FP significantly reduce measurement time and tube loading requirements, (3) CR and FP readily permit digital profile analysis, thereby eliminating observer error, and (4) unlike DF, CR and FP are independent of exposure level.

Amorphous silicon/cesium iodide (a-Si:H/CsI:Tl) flat-panel (FP)-based full-field digital mammography systems have recently become commercially available for clinical use. Some investigations on physical properties and imaging characteristics of these types of detectors have been conducted and reported. In this perception study, a phantom containing simulated microcalcifications (microCs) of various sizes was imaged with four detector systems: a FP system, a small field-of-view charge coupled device (CCD) system, a high resolution computed radiography (CR) system, and a conventional mammography screen/film (SF) system. The images were reviewed by mammographers as well as nonradiologist participants. Scores reflecting confidence ratings were given and recorded for each detection task. The results were used to determine the average confidence-rating scores for the four imaging systems. Receiver operating characteristics (ROC) analysis was also performed to evaluate and compare the overall detection accuracy for the four detector systems. For calcifications of 125-140 microm in size, the FP system was found to have the best performance with the highest confidence-rating scores and the greatest detection accuracy (Az = 0.9) in the ROC analysis. The SF system was ranked second while the CCD system outperformed the CR system. The p values obtained by applying a Student t-test to the results of the ROC analysis indicate that the differences between any two systems are statistically significant (p<0.005). Differences in microC detectability for the large (150-160 microm) and small (112-125 microm) size microC groups showed a wider range of p values (not all p values are smaller than 0.005, ranging from 0.6 to <0.001) compared to the p values obtained for the medium (125-140 microm) size microC group. Using the p values to assess the statistical significance, the use of the average confidence-rating scores was not as significant as the use of the ROC analysis p value for p value.

Flat-panel (FP) based digital radiography systems have recently been introduced as a new and improved digital radiography technology; it is important to evaluate and compare this new technology with currently widely used conventional screen/film (SF) and computed radiography (CR) techniques. In this study, the low-contrast performance of an amorphous silicon/cesium iodide (aSi/Csl)-based flat-panel digital chest radiography system is compared to those of a screen/film and a computed radiography system by measuring their contrast-detail curves. Also studied were the effects of image enhancement in printing the digital images and dependence on kVp and incident exposure. It was found that the FP system demonstrated significantly better low-contrast performance than the SF or CR systems. It was estimated that a dose savings of 70%-90% could be achieved to match the low-contrast performance of the FP images to that of the SF images. This dose saving was also found to increase with the object size. No significant difference was observed in low-contrast performances between the SF and CR systems. The use of clinical enhancement protocols for printing digital images was found to be essential and result in better low-contrast performance. No significant effects were observed for different kVps. From the results of this contrast-detail phantom study, the aSi/CsI-based flat-panel digital chest system should perform better under clinical situations for detection of low-contrast objects such as lung nodules. However, proper processing prior to printing would be essential to realizing this better performance.