Search

Objectives: This study aimed to compare the marginal adaptation of a cold ceramic (CC) sealer with the single-cone obturation technique with that of an AH-26 sealer with the lateral compaction technique in single-canal teeth. Materials and methods: In this in vitro experimental study, the root canals of 24 extracted single-rooted single-canal teeth were instrumented to F3 files by the crown-down technique and randomly assigned to 2 groups (n = 12). The root canals were obturated with a CC sealer and single-cone obturation technique with 4% gutta-percha in group 1 and with an AH-26 sealer and lateral compaction technique with 2% gutta-percha in group 2. After 4 weeks of storage at room temperature and 100% humidity, the root ends were sectioned horizontally 3 mm from the apex, and the mean linear distance between the root filling material and the root dentinal wall was measured under a scanning electron microscope (SEM). Comparisons were made by the Mann‒Whitney test (alpha = 0.05). Results: The mean linear distance (gap) was significantly smaller in the CC sealer/single-cone group than the AH-26/lateral compaction group (6.72 ± 2.57 vs. 12.94 ± 4.82 μm, P = 0.001). Conclusion: Marginal adaptation was significantly higher with the CC sealer and single-cone obturation technique than with the AH-26/lateral compaction technique, suggesting the suitability of the CC sealer and single-cone obturation technique for a hermetic seal in single-canal teeth. [ABSTRACT FROM AUTHOR]

Aim Methodology Results Conclusion This randomized clinical trial assessed the outcomes of nonsurgical root canal treatment (RCT), comparing a calcium silicate‐based sealer (CSBS) with the single‐cone technique (SC) with a zinc oxide‐eugenol (ZOE) sealer and warm vertical compaction (WVC).Ninety‐two single‐ and multi‐rooted teeth were divided into two groups and treated using either the SC with BioRoot™ RCS (BIO) or WVC with Pulp Canal Sealer™ EWT (PCS). Teeth with apical periodontitis (AP) in both groups were further divided into BIOAP and PCSAP subgroups. Standardized instrumentation and disinfection protocols were followed. Periapical index (PAI) was recorded, and clinical and radiographic follow‐ups were conducted at 1, 3, 6, 12, 24, and 48 months. Outcomes considered included success rate (under strict and loose criteria), extraction, length of filling, voids, and extrusion rate, as well as changes in PAI score from baseline. Outcome variables and prognostic factors were analysed using binary and multiple logistic regression at p < .05.Sixty‐seven teeth were included (recall rate, 73%). At 4‐year follow‐up, the overall success rates (BIO + PCS) were 89.6% by loose criteria and 83.3% by strict criteria. Subgroup success rates (BIOAP+PCSAP) were 88.5% by loose criteria and 80.4% by strict criteria. There were no significant differences between the groups in terms of success rate, extraction rate, length of filling, voids, or extrusion (p > .05). The pattern of PAI reduction was similar in both groups (p = .806).Treatment using the SC‐CSBS technique and the ZOE sealer with the WVC technique demonstrated a similar success rate. [ABSTRACT FROM AUTHOR]

Background: This study conducted a thorough assessment of vertical root fracture (VRF) resistance of endodontically treated teeth filled with various canal-filling systems and techniques through frequentist network meta-analysis (NMA). Methods: A systematic literature search was performed to retrieve relevant publications using PubMed, Embase, ScienceDirect, Web of Science, and Cochrane Library databases. The retrieval time range was from Jan 2000 to Sep 2023. The literature selection and data extraction were independently conducted by two investigators. Eligible studies were critically appraised for risk of bias and quality of evidence. Subsequently, we used the 'network' package in Stata/MP 17.0 software to compare the VRF resistance of roots treated with different obturating systems or techniques. Results: Forty-eight trials involving 2724 single-canal roots were included in the NMA. The surface under the cumulative ranking curves indicated that Resilon/Epiphany (80.8%), although outdated, provided the highest VRF resistance among all obturating systems. This was followed by GP/iRootSP (55.5%), GP/MTA-Plus (47.9%), GP/AH-Plus (47.4%), GP/AH-26 (45.9%), and GP/ZOE (12.3%). The roots filled with Resilon/Epiphany showed better VRF resistance as compared to those filled with gutta-percha/AH-Plus (SMD = 0.77, 95%CI 0.10 to 1.45) and gutta-percha/zinc oxide eugenol (SMD = 1.64, 95%CI 0.47 to 2.80). The single cone technique (SCT) group displayed the highest VRF resistance, and roots filled with all techniques, except Thermafil, outperformed the positive control group. Conclusions: Resilon/Epiphany demonstrated the greatest root strength among all six obturating systems, followed by GP/iRootSP and GP/MTA-Plus, which are calcium silicate-based systems. In contrast, the gutta-percha/zinc-oxide eugenol system exhibited the weakest performance. All canal-filling techniques, particularly the SCT, strengthen endodontically treated roots, except for the Thermafil technique. Further well-designed clinical trials with large sample sizes are essential for validation. [ABSTRACT FROM AUTHOR]

Abstract Objectives This study aimed to compare the marginal adaptation of a cold ceramic (CC) sealer with the single-cone obturation technique with that of an AH-26 sealer with the lateral compaction technique in single-canal teeth. Materials and methods In this in vitro experimental study, the root canals of 24 extracted single-rooted single-canal teeth were instrumented to F3 files by the crown-down technique and randomly assigned to 2 groups (n = 12). The root canals were obturated with a CC sealer and single-cone obturation technique with 4% gutta-percha in group 1 and with an AH-26 sealer and lateral compaction technique with 2% gutta-percha in group 2. After 4 weeks of storage at room temperature and 100% humidity, the root ends were sectioned horizontally 3 mm from the apex, and the mean linear distance between the root filling material and the root dentinal wall was measured under a scanning electron microscope (SEM). Comparisons were made by the Mann‒Whitney test (alpha = 0.05). Results The mean linear distance (gap) was significantly smaller in the CC sealer/single-cone group than the AH-26/lateral compaction group (6.72 ± 2.57 vs. 12.94 ± 4.82 μm, P = 0.001). Conclusion Marginal adaptation was significantly higher with the CC sealer and single-cone obturation technique than with the AH-26/lateral compaction technique, suggesting the suitability of the CC sealer and single-cone obturation technique for a hermetic seal in single-canal teeth.

Abstract Background This study conducted a thorough assessment of vertical root fracture (VRF) resistance of endodontically treated teeth filled with various canal-filling systems and techniques through frequentist network meta-analysis (NMA). Methods A systematic literature search was performed to retrieve relevant publications using PubMed, Embase, ScienceDirect, Web of Science, and Cochrane Library databases. The retrieval time range was from Jan 2000 to Sep 2023. The literature selection and data extraction were independently conducted by two investigators. Eligible studies were critically appraised for risk of bias and quality of evidence. Subsequently, we used the ‘network’ package in Stata/MP 17.0 software to compare the VRF resistance of roots treated with different obturating systems or techniques. Results Forty-eight trials involving 2724 single-canal roots were included in the NMA. The surface under the cumulative ranking curves indicated that Resilon/Epiphany (80.8%), although outdated, provided the highest VRF resistance among all obturating systems. This was followed by GP/iRootSP (55.5%), GP/MTA-Plus (47.9%), GP/AH-Plus (47.4%), GP/AH-26 (45.9%), and GP/ZOE (12.3%). The roots filled with Resilon/Epiphany showed better VRF resistance as compared to those filled with gutta-percha/AH-Plus (SMD = 0.77, 95%CI 0.10 to 1.45) and gutta-percha/zinc oxide eugenol (SMD = 1.64, 95%CI 0.47 to 2.80). The single cone technique (SCT) group displayed the highest VRF resistance, and roots filled with all techniques, except Thermafil, outperformed the positive control group. Conclusions Resilon/Epiphany demonstrated the greatest root strength among all six obturating systems, followed by GP/iRootSP and GP/MTA-Plus, which are calcium silicate-based systems. In contrast, the gutta-percha/zinc-oxide eugenol system exhibited the weakest performance. All canal-filling techniques, particularly the SCT, strengthen endodontically treated roots, except for the Thermafil technique. Further well-designed clinical trials with large sample sizes are essential for validation.

This study aimed to evaluate and compare the quality of matching single-cone obturation using three different single-file systems—WaveOne® Gold (Dentsply Sirona, Bensheim, Germany), Reciproc® blue (VDW GmbH, Munich, Germany), and Procodile® (Komet Medical, Gebr. Brasseler GmbH & Co. KG, Lemgo, Germany). The evaluation focused on the percentage of gutta-percha-filled areas (PGFAs), sealer-filled areas (PSFAs), and unfilled areas (PUAs) across three different sections of curved and straight root canals. Sixty extracted human teeth were categorized into six groups. Based on radiographically determined root canal curvature, thirty curved and thirty straight root canals were prepared using the single-file systems according to the manufacturers' instructions and obturated with matching gutta-percha cones using AH-Plus sealer. A total of 180 sections were evaluated digitally under the microscope and the results were statistically analyzed. The mean gutta-percha percentages for Reciproc® blue, Procodile®, and WaveOne® Gold were 83%, 82%, and 80%, respectively. No significant (p > 0.05) and relevant (ηp2 < 0.10) differences were found in the proportion of form-fitting gutta-percha cones between the systems in all sections. Similarly, canal anatomy showed no significant influence (p > 0.05). Ex vivo, all three systems showed comparable filling quality in all sections of curved and straight canals. Therefore, it can be concluded that all three file systems, in combination with their corresponding gutta-percha points, might be reliable methods for root canal obturation. Reciproc® Blue, Procodile®, and WaveOne® Gold consistently achieved comparable obturation results across various root configurations and levels of the root canal. [ABSTRACT FROM AUTHOR]

Introduction: Calcium silicate-based sealers are an alternative to be used into root canal, mainly to their biological properties. However, some biological parameters need to be determined in an in vivo animal research model. So, the aim of the present study was to evaluate in vivo the tissue biocompatibility of a calcium silicate-based sealer (EndoSequence BC Sealer) and an epoxy resin-based sealer (AH-Plus). Materials and Methods: Polyethylene tubes were filled with freshly mixed sealers and implanted in connective subcutaneous tissue of 25 rats (5/euthanasia day) (Rattus norvegicus albinus). Empty tubes were used as controls and no tubes as sham. Histopathological (hematoxylin eosin) and histochemical (Picrosirius red) examinations were conducted at 3, 7, 15, 30 and 60 days (five rats/day) after the implantation procedure (n=5/group). The type/intensity of inflammation and collagenesis was analyzed statistically with Friedman or Kruskal-Wallis/Dunn tests (P<0.05). Results: The profile of inflammation induced by AH-Plus (Median=2, Range=2-3) was significantly greater than that by Endosequence BC Sealer (Median=1, Range=1-1) during the 15-day experimentation period (P=0.018). After 30 days, both materials produced similar tissue reaction (P>0.05). AH-Plus and Endosequence BC Sealer (Median=2, Range=1-2) induced a high level of fibrosis after 60-day than control (Median=1, Range=1-1) and sham (Median=0, Range=0-0) groups (P<0.001) of fibrosis based in type I collagen increase (P=0.025 and P=0.021, respectively). Tissue necrosis was not observed and the bioceramic sealer showed significant signs of endocytosed (Median=1, Range=1-1) material after 7 days than other groups (Median=0, Range=0-0) (P<0.05). The calcium silicate-based sealer induced tissue repair faster than the epoxy resin-based sealer tested. However, both materials showed adequate biocompatibility and tolerance by subcutaneous tissues, with few differences in inflammatory profiles, formation of granulation tissue, and collagenesis. Conclusions: It may be concluded that calcium silicate-based sealer (EndoSequence BC Sealer) and an epoxy resin-based sealer (AH-Plus) presented suitable biocompatibility. [ABSTRACT FROM AUTHOR]

Objectives: This ex vivo study aimed to evaluate the influence of different filling techniques on the filling removal from oval root canals filled with bioceramic sealer. Methods: Thirty-six mandibular incisors with single oval canals were filled with bioceramic sealer following the techniques (n = 12): single-cone, modified McSpadden, or continuous wave of condensation, and scanned by micro-computed tomography (micro-CT). The filling was removed using the Clearsonic ultrasound tip and Reciproc system up to the R40 instrument, and the working time was recorded. The teeth were scanned again by micro-CT. Percentage of remnant volume (mm³) of the filling material, dentin thickness, and root canal transportation were measured. The data was analyzed using parametric and non-parametric tests with a significance level of 5%. Results: It took more time to remove the filling material using the continuous wave of condensation technique (p < 0.05), followed by the modified McSpadden and single-cone techniques. There was no difference (p > 0.05) when comparing the percentage of remaining filling material among the three groups, nor did it among the segments of each tooth. There was also no difference in the analysis of dentin thickness and transportation when comparing the groups (p > 0.05). Conclusions: The filling technique did not influence the amount of remaining filling material, dentin thickness, and transportation. The working time was longer with thermoplastic filling techniques. Clinical relevance: Endodontic retreatment in teeth filled with bioceramic sealers increases with their use. Several techniques are used to fill the root canals, thus, it is important to know whether the filling technique influences the non-surgical endodontic retreatment. [ABSTRACT FROM AUTHOR]

Background: The performance of root canal filling materials in sealing is crucial for the effectiveness of endodontic procedures as it prevents the escape of microorganisms and guarantees the durability of the treatment. Materials and Methods: The present in vitro investigation included the preparation of 90 human single-rooted teeth using a standardized process. These teeth were then randomly separated into three groups (n = 30) according to the obturation technique: Group A (Lateral Compaction), Group B (Thermafil), and Group C (Continuous Wave of Condensation). Furthermore, each group was separated into two subgroups based on the specific kind of root canal filling material employed: Subgroup 1 (Gutta-Percha) and Subgroup 2 (Resilon). The sealing capacity was evaluated using a dye penetration technique, with measurements conducted at three specific time intervals: 24 hours, 1 week, and 4 weeks after the obturation process. Statistical analysis of the data was conducted using analysis of variance and post hoc tests to identify significant differences across groups. Results: The findings showed that the Continuous Wave of Condensation method (Group C) had the lowest dye penetration, with an average depth of penetration of 1.2 mm. The Thermafil technique (Group B) followed closely with a penetration depth of 1.8 mm, while the Lateral Compaction technique (Group A) achieved a penetration depth of 2.5 mm. In terms of sealing ability, Gutta-Percha demonstrated superior performance compared to Resilon, achieving average penetration depths of 1.5 mm and 2.0 mm, respectively. Statistical analysis showed statistically significant differences between the groups (P < 0.05), with the Continuous Wave of Condensation approach utilizing Gutta-Percha showing the highest level of sealing effectiveness. Conclusion: In conclusion, the Continuous Wave of Condensation approach showed a substantial improvement in the sealing efficacy of root canal fillings when compared to the Lateral Compaction and Thermafil procedures.

Background: The efficacy of root canal obturation is crucial for the long-term success of endodontic treatments. Recently, bioceramic materials have gained attention due to their superior biological and physical properties compared to traditional materials. Materials and Methods: In this study, 60 extracted human teeth with single canals were randomly divided into three groups (n = 20) based on the obturation material used: Group A (EndoSequence BC Sealer), Group B (BioRoot RCS), and Group C (Conventional Gutta-Percha with AH Plus Sealer). All canals were prepared using a standardized protocol and obturated using the respective materials. The quality of obturation was assessed using micro-CT analysis, measuring void volume percentage and adaptation to canal walls. Additionally, apical sealing ability was evaluated using a dye penetration test. Results: Group A showed a significantly lower void volume percentage (2.1% ±0.3) compared to Group B (3.4% ±0.5) and Group C (5.6% ±0.7) (P < 0.05). Micro-CT analysis revealed better adaptation to canal walls in Group A and Group B compared to Group C. The dye penetration test indicated that Group A had the least apical leakage (0.5 mm ± 0.2), followed by Group B (0.8 mm ± 0.3), and Group C (1.5 mm ± 0.4) (P < 0.05). Conclusion: The new bioceramic materials, EndoSequence BC Sealer and BioRoot RCS demonstrated superior performance in root canal obturation compared to the conventional AH Plus Sealer.

Objective: To assess the clinical outcomes of regenerative endodontic procedures using autologous platelet concentrate. Both regeneration and apexification procedures were examined and compared with each other. Material and Methods: The PRISMA 2020 Checklist has been utilized to carry out the systematic review and meta-analysis for the present study. PubMed, Scopus, Web of Science, EBSCO, Embase, and ISI Web of Knowledge have been reviewed for systematic literature until May 2023. A fixed-effect model and a Mantel-Haenszel methodology have been used to measure the risk ratio's 95% confidence interval. Then, Meta-analyses were carried out utilizing Stata/MP version 17. Results: Duplicate studies were eliminated from the first review, 849 studies' abstracts were reviewed, two authors reviewed 103 papers' full texts, and finally, 20 articles were selected. The survival rate in regenerative endodontic procedures between apexification and regenerative endodontic procedures was -0.01 (RR: -0.01, 95% CI: -0.05, 0.02; p=0.35). Conclusion: Throughout the present meta-analysis, regenerative endodontic therapy is an effective intervention with a high survival and success rate in managing immature necrotic permanent teeth.

Abstract: The minimally invasive endodontic access is not directly associated with tooth discoloration in the presence of bioceramic or epoxy resin-based root canal sealers. This study aimed to evaluate the influence of minimally invasive access and endodontic sealer composition on the color stability of endodontically-treated teeth, the restorative material adaptation, and the presence of remaining filling material in the pulp chamber. Endodontic access surgery was performed in maxillary central incisors, either through conservative or minimally invasive approaches, and the root was filled with AH Plus or Bio-C Sealer. The crown color was measured with a spectrophotometer at baseline and after root obturation, restoration, and specimen storage for one year in an oven. The occurrence of voids in the restoration and the remaining filling material was analyzed using micro-CT scans. The Yellowness Index (YI) and color changes (∆E00) were calculated after each color measurement. Data of micro-CT were submitted to 2-way ANOVA, and YI and ∆E00 were analyzed with repeated-measures ANOVA. Pair-wise comparisons were performed with Tukey's test (α = 0.05). The experimental conditions had no effect on the presence of the remaining material. The minimally invasive access associated with Bio-C Sealer resulted in more voids between the restoration and the remaining filling material. Only the evaluation time affected YI and ∆E00 values. Specimens became more yellow after filling and storage in the oven (the highest ∆E00 values). The present study showed that sealer and minimally invasive cavities are not associated with crown color stability following endodontic treatment.

ABSTRACT: Background: The performance of root canal filling materials in sealing is crucial for the effectiveness of endodontic procedures as it prevents the escape of microorganisms and guarantees the durability of the treatment. Materials and Methods: The present in vitro investigation included the preparation of 90 human single-rooted teeth using a standardized process. These teeth were then randomly separated into three groups (n = 30) according to the obturation technique: Group A (Lateral Compaction), Group B (Thermafil), and Group C (Continuous Wave of Condensation). Furthermore, each group was separated into two subgroups based on the specific kind of root canal filling material employed: Subgroup 1 (Gutta-Percha) and Subgroup 2 (Resilon). The sealing capacity was evaluated using a dye penetration technique, with measurements conducted at three specific time intervals: 24 hours, 1 week, and 4 weeks after the obturation process. Statistical analysis of the data was conducted using analysis of variance and post hoc tests to identify significant differences across groups. Results: The findings showed that the Continuous Wave of Condensation method (Group C) had the lowest dye penetration, with an average depth of penetration of 1.2 mm. The Thermafil technique (Group B) followed closely with a penetration depth of 1.8 mm, while the Lateral Compaction technique (Group A) achieved a penetration depth of 2.5 mm. In terms of sealing ability, Gutta-Percha demonstrated superior performance compared to Resilon, achieving average penetration depths of 1.5 mm and 2.0 mm, respectively. Statistical analysis showed statistically significant differences between the groups (P < 0.05), with the Continuous Wave of Condensation approach utilizing Gutta-Percha showing the highest level of sealing effectiveness. Conclusion: In conclusion, the Continuous Wave of Condensation approach showed a substantial improvement in the sealing efficacy of root canal fillings when compared to the Lateral Compaction and Thermafil procedures. [ABSTRACT FROM AUTHOR]

ABSTRACT: Background: The efficacy of root canal obturation is crucial for the long-term success of endodontic treatments. Recently, bioceramic materials have gained attention due to their superior biological and physical properties compared to traditional materials. Materials and Methods: In this study, 60 extracted human teeth with single canals were randomly divided into three groups (n = 20) based on the obturation material used: Group A (EndoSequence BC Sealer), Group B (BioRoot RCS), and Group C (Conventional Gutta-Percha with AH Plus Sealer). All canals were prepared using a standardized protocol and obturated using the respective materials. The quality of obturation was assessed using micro-CT analysis, measuring void volume percentage and adaptation to canal walls. Additionally, apical sealing ability was evaluated using a dye penetration test. Results: Group A showed a significantly lower void volume percentage (2.1% ±0.3) compared to Group B (3.4% ±0.5) and Group C (5.6% ±0.7) (P < 0.05). Micro-CT analysis revealed better adaptation to canal walls in Group A and Group B compared to Group C. The dye penetration test indicated that Group A had the least apical leakage (0.5 mm ± 0.2), followed by Group B (0.8 mm ± 0.3), and Group C (1.5 mm ± 0.4) (P < 0.05). Conclusion: The new bioceramic materials, EndoSequence BC Sealer and BioRoot RCS demonstrated superior performance in root canal obturation compared to the conventional AH Plus Sealer. [ABSTRACT FROM AUTHOR]

Abstract Background This study aimed to assess the quality of various obturation techniques to fill perforation caused by internal root resorption using Micro-computed Tomography. Methods Cone-beam computed tomography images of a maxillary central incisor tooth with perforating internal resorptive defect were used to create a 3D printed model of the affected tooth. The replicas were divided into four groups based on the obturation technique used. The techniques included Group 1: a polydimethylsiloxane-based sealer (GuttaFlow-2) with gutta-percha. Group 2: same as Group 1 except for using a pre-mixed Bioceramic-based sealer (NeoSEALER Flo). Group 3: the defect was filled entirely using the NeoSealer Flo Bioceramic-based sealer. Group 4: the samples were obturated using the warm vertical compaction technique with a resin-based sealer (ADSeal). The resin models were then scanned a micro-computed scanner to evaluate the percentage of voids in each group. Results The results showed that NeoSEALER Flo groups had significantly the highest volume of voids while GuttaFlow-2 and warm vertical compaction groups had the lowest void volume. Conclusions GuttaFlow-2 and warm vertical compaction techniques performed best in filling the internal resorptive defect.

Introduction This study aimed to compare the effectiveness of two endodontic cleaning techniques, passive ultrasonic irrigation (PUI) and the XP-endo Finisher R (XPR) system, in removing residual filling material during endodontic retreatment procedures. Materials and Methods: Forty mandibular premolars with oval canals were divided into four groups based on the sealer used (AH-Plus or Bio-C Sealer) and the cleaning technique employed (PUI or XPR). To ensure uniformity of canal volume among groups, initial micro-CT scans were conducted. The canals were instrumented, filled, and then re-instrumented before undergoing either PUI or XPR cleaning techniques. Residual filling material volumes were assessed through micro-CT scans, and statistical analysis was performed using the Kruskal-Wallis and Mann-Whitney U tests. Results: Following instrumentation, there was no significant difference in residual filling material volumes between AH-Plus and Bio-C Sealer groups (1.35 mm³ and 1.02 mm³, respectively; P>0.05). However, after supplementary cleaning techniques, XPR-cleaned specimens exhibited significantly less residual material compared to PUI-cleaned specimens (0.01 mm³ and 0.29 mm³ for Bio-C Sealer, and 0.07 mm³ and. 0.30 mm³ for AH-Plus, P<0.05). Conclusion: The XPR system was found to be more effective than PUI in removing residual filling material from Bio-C Sealer-filled root canals. This highlights its potential as a useful supplementary cleaning technique in endodontic retreatment procedures. [ABSTRACT FROM AUTHOR]

The aim of the study was to evaluate the ability of a modified passive deflation needle to reduce the apical voids during the intra-canal iRoot SP sealer injection. A modified passive deflation injection needle was designed. Forty 20°-curved and twenty S-shaped single-canal resin block models were allocated into six groups. Each group was mechanically prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Radiographs were taken to measure the length of apical void in each specimen. Similarly, twenty single-canal extracted premolars were collected and randomly divided into four groups. Each group was prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Roots were then scanned using micro-computed tomography (micro-CT), and the volume of voids in root canals was analyzed and compared among groups. Statistical analysis demonstrated that the length and the volumetric percentage of voids were much lower in the modified needle group in both resin block root canal models and extract teeth than the normal plastic needle group (P < 0.05). The modified passive deflation needle can efficiently reduce apical voids during the intra-canal iRoot SP sealer injection. [ABSTRACT FROM AUTHOR]

Objective: This study aimed to compare the effectiveness of the Tagger technique and the lateral condensation technique with different obturation cements in achieving optimal apical sealing in endodontic treatments. Methods: An in vitro study was conducted on 68 extracted human upper or lower first premolars. Teeth were randomly divided into four experimental groups (n=17) based on two obturation techniques and endodontic sealers employed, as follows: Group 1, Tagger technique with the zinc oxide-eugenol sealer; Group 2, Tagger technique with the resin-based sealer; Group 3, lateral condensation technique with zinc oxide-eugenol sealer, and Group 4, lateral condensation technique with resin-based sealer. Homogeneity of the gutta-percha mass and apical obliteration were evaluated under a digital stereomicroscope. Data were analyzed using the chi-square test, and a P-value<0.05 was considered statistically significant. Results: Most group specimens exhibited non-homogeneous gutta-percha, whereas apical obliteration was achieved in a significant proportion of samples across all groups. No significant difference was found between the study groups either in the homogeneity of the gutta-percha mass (P=0.978) or in the optimal apical obliteration (P=0.782). Conclusions: The study found no significant difference in the effectiveness of the Tagger hybrid and lateral condensation techniques using different sealers in achieving optimal apical sealing and gutta-percha homogeneity. This highlights the critical role of the clinician's expertise in ensuring successful endodontic outcomes. [ABSTRACT FROM AUTHOR]

Copyright of Acta Odontologica Latinoamericana: AOL is the property of Acta Odontologica Latinoamericana and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Revista Ciencias de la Salud is the property of Colegio Mayor de Nuestra Senora del Rosario and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract Objective To evaluate the radiographic quality of endodontic treatments and their respective coronal restorations, correlating it with periapical status. Material and method The root filling quality of four hundred and sixteen teeth was carefully evaluated regarding three radiographic parameters: i) apical extension, ii) homogeneity and iii) taper, being E0, E1 and E2. E0 and E1 corresponding to sharp and mild deviation from normality, respectively; while E2 corresponding to the gold standard. Due to the combination of the assigned scores, filling was classified as perfect (PF), with three E2 scores; satisfactory (ST), with two E2 scores; or deficient (DF), with one or no E2 score. In addition, periapical status was considered to be a healthy periodontium; thickening of the periodontal ligament and presence of apical periodontitis. Coronary restorations were classified according to the presence and type of restoration. Associations between variables were analyzed using Spearman's Correlation test (p0.05); however, it was significantly associated with the general filling quality (p=0.021). Conclusion Fillings presented low quality standard, being the most critical parameter, negatively influencing the periapical status of the entire sample.

Background: Achieving a reliable seal in root canal obturation is essential for the success of endodontic treatment. Despite the availability of multiple techniques, the comparative sealing abilities of these methods remain a topic of investigation, particularly in permanent molars. Materials and Methods: This in vitro study involved 60 extracted permanent molars, divided randomly into three groups: Group A (lateral compaction), Group B (thermoplasticized gutta-percha), and Group C (single cone). After instrumentation and obturation, the sealing ability was assessed using a dye penetration method. Arbitrary values were assigned to quantify the extent of dye penetration. Results: The mean dye penetration values were as follows: Group B (thermoplasticized gutta-percha) had the lowest penetration (2.1 ± 0.3 mm), followed by Group A (lateral compaction) (3.5 ± 0.4 mm), and Group C (single cone) exhibited the highest penetration (5.2 ± 0.6 mm). Conclusion: In this study, thermoplasticized gutta-percha demonstrated superior sealing ability compared to lateral compaction and single cone techniques in permanent molars. These findings underscore the importance of selecting an effective obturation technique to ensure optimal seal integrity in root canal therapy.

Abstract Objectives This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). Materials and methods Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. Results Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P

Objective: The present study aimed to evaluate the bond strength of Sure-Seal Root as a new bioceramic-based sealer, and compare it with other sealers, including an epoxy resin-based sealer (AH-Plus), zinc oxide eugenol (ZOE) and a mineral trioxide aggregate-based sealer (MTA Fillapex).Methods: In this in vitro study, 40 extracted mandibular premolars were randomly assigned into 4 groups (n=10) according to the type of sealer applied as follows: Group 1: AH-Plus, Group 2: MTA-Fillapex, Group 3: Sure-Seal Root, and Group 4: ZOE. The canals were prepared and obturated with gutta-percha and the corresponding sealer. The samples were sectioned into horizontal segments, and the push-out bond strength was determined using a universal testing machine at the coronal, middle, and apical root thirds. The data were analyzed by repeated measures ANOVA, and the significance level was set at P0.05). In the middle third, AH-Plus exhibited significantly greater bond strength compared to Sure-Seal Root and ZOE sealers (P0.05). In the apical third, both AH-Plus and MTA-Fillapex showed significantly greater push-out bond strength than Sure-Seal Root and ZOE sealers (P

Introduction: Tricalcium silicate-based cements exhibit several beneficial properties for dental health and biocompatibility, which can induce biomineralisation. Objectives: To assess the sealing ability and intratubular penetration of tricalcium silicate-based sealers using warm and cold obturation techniques. Materials and Methods: An electronic search was conducted in PubMed, Scopus, and Web of Science databases for endodontically treated teeth with bioceramics and their sealing capacity in root canal obturation published up to February 2023. Results: Of the 90 articles, 16 met the inclusion criteria, and only 10 were used for the meta-analysis, of which four addressed intratubular penetration, four addressed sealing capacity, and two addressed both variables. In the sealing capacity group, the meta-analysis concluded a standardised mean difference (SMD) of −1.31 in favour of the test group (warm) with a certain nonsignificant trend (p = 0.081); regarding intratubular penetration, the meta-analysis concluded an SMD = 2.34 in favour of the test group (warm) with significantly greater penetration (p = 0.032). Conclusion: The warm obturation technique introduced significantly greater intratubular penetration than the cold technique, along with a remarkably superior sealing capacity compared to the cold technique, approaching statistical significance.

Abstract Background The educational process in the field of endodontics commences with preclinical exercises to enhance students’ proficiency in cleaning, shaping, and performing root canal fillings. Therefore, this study aimed to radiographically evaluate the technical quality of root canal fillings performed by preclinical students on extracted teeth at the College of Dentistry, University of Ha’il, Saudi Arabia. Methods A total of 788 extracted human teeth received root canal treatment by undergraduate students. The samples were then gathered and radiographically assessed using the three quality criteria of length, density, and taper. The category of root canal fillings was classified as either acceptable or unacceptable. The criteria for evaluating the acceptability of filling quality were defined based on the presence of adequate length, density, and taper. The effectiveness of root canal fillings was also evaluated in relation to the tooth type, sex, and treatment year. The agreement between the examiners was evaluated using Cohen’s kappa test, and the relationship between the research variables was determined using the chi-squared test. The significance threshold was set at 0. 05. Results The overall quality of root filling was determined to be satisfactory in 532 (67.5%) of 788 endodontically treated extracted teeth. The majority of the research sample (88.1%) had enough length, 89.6% had adequate density, and 86.4% had acceptable taper. The quality of anterior teeth was substantially better than that of posterior teeth (p

Objectives: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). Materials and methods: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. Results: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). Conclusions: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument. [ABSTRACT FROM AUTHOR]

Objectives: An evaluation of the effectiveness of a new computational system proposed for automatic classification, developed based on a Siamese network combined with Convolutional Neural Networks (CNNs), is presented. It aims to identify endodontic technical errors using Cone Beam Computed Tomography (CBCT). The study also aims to compare the performance of the automatic classification system with that of dentists. Methods: One thousand endodontically treated maxillary molars sagittal and coronal reconstructions were evaluated for the quality of the endodontic treatment and the presence of periapical hypodensities by three board-certified dentists and by an oral and maxillofacial radiologist. The proposed classification system was based on a Siamese network combined with EfficientNet B1 or EfficientNet B7 networks. Accuracy, sensivity, precision, specificity, and F1-score values were calculated for automated artificial systems and dentists. Chi-square tests were performed. Results: The performances were obtained for EfficienteNet B1, EfficientNet B7 and dentists. Regarding accuracy, sensivity and specificity, the best results were obtained with EfficientNet B1. Concerning precision and F1-score, the best results were obtained with EfficientNet B7. The presence of periapical hypodensity lesions was associated with endodontic technical errors. In contrast, the absence of endodontic technical errors was associated with the absence of hypodensity. Conclusions: Quality evaluation of the endodontic treatment performed by dentists and by Siamese Network combined with EfficientNet B7 or EfficientNet B1 networks was comparable with a slight superiority for the Siamese Network. Clinical relevance: CNNs have the potential to be used as a support and standardization tool in assessing endodontic treatment quality in clinical practice. [ABSTRACT FROM AUTHOR]

The aim of this study was to assess by confocal laser microscope the depth of dentinal tubule penetration of two tricalcium silicate‐based sealers promoted by two obturation techniques in curved canals compared with AHPlus. One hundred and twenty canals were divided into six groups (n = 20): BCSC‐Bio‐C Sealer (BC) and single‐cone technique (SC); BCCW‐BC and continuous condensation wave (CW); TFSC‐Total Fill (TF) and SC; TFCW‐TF and CW; AHSC‐AH Plus (AH) and SC; AHCW‐AH and CW. Data were analysed using the three‐way ANOVA and Tukey's test (α = 5%). Penetration depth was significantly greater for TFCW than TFSC and greater for AHCW than AHSC (p < 0.05). There was no significant difference between BCCW and BCSC (p > 0.05). The penetration of TF was significantly greater (p < 0.05). The CW technique promoted greater intratubular penetration, except for the BC sealer. [ABSTRACT FROM AUTHOR]

Copyright of Turkiye Klinikleri Journal of Dental Sciences is the property of Turkiye Klinikleri and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

(1) Background: Non-surgical endodontic treatment has been shown to be clinically successful; however, clinical long-term data are scarce. This practice-based retrospective clinical investigation evaluated endodontic outcomes over 40 years and identified relevant clinical co-factors. (2) Methods: Two experienced dental practitioners in two different private dental practices treated 174 patients with 245 teeth from 1969 to 1993. After root canal obturation, either a new direct restoration (amalgam, resin composite, or glass-ionomer cement) or the re-cementation of a pre-existing prosthetic restoration or renewal of prosthetic restoration followed. Metal posts (operator A) or metal screws (operator B) were inserted when coronal substance loss was significant. The primary outcome (i.e., tooth survival) was achieved when the endodontically treated tooth was, in situ, painless and had full function at the end of the observation period. A secondary outcome, the impact of different prognostic factors on survival rate, was evaluated. (3) Results: The overall mean survival was 56.1% of all treated teeth after 40 years of clinical service, resulting in an annual failure rate of 1.1%. Most investigated clinical co-factors (jaw, tooth position, intracanal dressings, post/screw placement, and gender) showed no significant influence on survival. (4) Conclusions: Even with materials and techniques from the 1970s and 1980s, successful root canal treatment was achievable. Except for post-endodontic restorations, most of the evaluated factors had no significant influence on the clinical long-term survival of root canal-treated teeth. [ABSTRACT FROM AUTHOR]

This study aimed to review the considerations for choosing a suitable sealer according to various endodontic scenarios. An electronic search of PubMed, Scopus, and the Web of Science was undertaken for the keywords of 'sealer choosing', 'appropriate sealer', 'suitable sealer', 'sealer for clinical scenario', and 'sealer for clinical situations'. However, the literature review revealed a lack of studies with practical clinical recommendations regarding the choice of appropriate endodontic root canal sealers for particular clinical situations of root canal treatment. Therefore, a narrative review was undertaken under the basis of the characteristics of an epoxy resin-based sealer (ERS) versus a calcium silicate-based sealer (CSS). Based on the evidence found through the review, the choice of an appropriate sealer in a variety of clinical scenarios was proposed. An ERS is recommended for one-visit non-vital cases, teeth with periodontal involvement, cracked teeth, and internal root resorption without root perforation. A CSS is recommended for vital or non-vital cases in multiple visits, teeth with internal root resorption with perforation or internal approach for external cervical resorption, teeth with open apices, and teeth with iatrogenic aberrations. [ABSTRACT FROM AUTHOR]

Introduction: The current study aimed to compare the quality of root canal obturation performed with cold lateral condensation with other obturation techniques. Materials and Methods: Diverse Search was conducted using six electronic/academic databases following PICOS (i.e. population, intervention, control, outcomes, and study design) strategy: (P) Extracted mature permanent teeth; (I) Obturation techniques except for cold lateral condensation; (C) Cold lateral condensation tyechnique; (O) Quality of root canal obturation; and (S) In vitro studies assessing parameters using micro-computed tomography. The statistical method used for the meta-analyses was the "inverse variance DerSimonian-Laird test". The heterogeneity data was calculated using the T2, Cochran Q test, and 12 statistics. Results: Fifteen studies were included for the final analysis; one had a low risk of bias, eight a moderate risk, and six a high risk of bias. Ten studies were selected for meta-analyses; three studies comparing cold lateral condensation with carrier-based gutta-percha techniques [P=0.96; mean difference (MD)=- 0.02; confidence interval (CI): (-0.77, 0.73); 12=21%]; three comparing cold lateral condensation with single-cone techniques [P=0.75; MD=-0.39; CI: (-2.77, 1.99); 12=92%]; two comparing cold lateral condensation and thermo-plasticized injectable techniques [P=0.37; MD=5.91; CI: (-7.13,18.94); 12=99%]; and five comparing cold lateral condensation with warm vertical condensation techniques [P<0.0001; MD=5.29; CI=(2.84, 7.74); 12=92%]. The overall effect reported significant results [P=0.0003; MD=2.69; CI=(1.23, 4.16); 12=96%]; favoring fewer voids and gaps for the other used obturation techniques. Conclusions: Cold lateral condensation and single-cone techniques presented no statistical differences. Nonetheless, Warm vertical condensation technique had better results compared to cold lateral condensation. [ABSTRACT FROM AUTHOR]

Objective: To identify the challenges faced by final year dental students and house officers while performing endodontic treatment. Study Design: Cross sectional study. Setting: Multicenter study. Setting: Involving Dental Colleges of Twin Cities Dental Hospitals of Islamabad and Rawalpindi including Islamabad Dental Hospital, Islamic International Dental Hospital, Pakistan Institute of Medical Sciences, Armed Forces Institute of Dentistry, Rawal Institute of Health Sciences and Margalla Institute of Health Sciences. Period: June 2023 to December 2023. Methods: This cross sectional descriptive study was conducted on 263 participants. The inclusion criteria was final year dental students and house officers who had completed their mandatory rotation in endodontics department and performed root canal treatment with conventional methods. A structured questionnaire consisting of five sections containing patient management, access opening, working length determination, cleaning and shaping procedure and obturation was constructed. Google forms were sent to the participants after sample size was calculated with WHO calculator. Data was analyzed through Google forms. Results: The current study shows that majority of the participants faced difficulties in the patient management and obturation procedure. The overall most common difficulty encountered was rubber dam application (44.1%) followed by accessory GP bending during obturation (42%), apex locator use (39.4%), and canal orifice location (39.8%). Conclusion: The students and house officers are facing multiple difficulties in performing root canal treatment independently. Therefore there is a need to focus more on the training of students and house officers in their endodontic department rotation. [ABSTRACT FROM AUTHOR]

Objective: The present study aimed to evaluate the bond strength of Sure-Seal Root as a new bioceramic-based sealer, and compare it with other sealers, including an epoxy resin-based sealer (AH-Plus), zinc oxide eugenol (ZOE) and a mineral trioxide aggregate-based sealer (MTA Fillapex). Methods: In this in vitro study, 40 extracted mandibular premolars were randomly assigned into 4 groups (n=10) according to the type of sealer applied as follows: Group 1: AH-Plus, Group 2: MTA-Fillapex, Group 3: Sure-Seal Root, and Group 4: ZOE. The canals were prepared and obturated with gutta-percha and the corresponding sealer. The samples were sectioned into horizontal segments, and the push-out bond strength was determined using a universal testing machine at the coronal, middle, and apical root thirds. The data were analyzed by repeated measures ANOVA, and the significance level was set at P<0.05. Results: There were no significant differences in the push-out bond strength between groups in the coronal third (P>0.05). In the middle third, AH-Plus exhibited significantly greater bond strength compared to Sure-Seal Root and ZOE sealers (P<0.05), whereas MTA-Fillapex was not significantly different from the other groups (P>0.05). In the apical third, both AH-Plus and MTA-Fillapex showed significantly greater push-out bond strength than Sure-Seal Root and ZOE sealers (P<0.05). Conclusions: AH-Plus sealer exhibited the highest and ZOE showed the lowest bond strength. Sure-Seal Root indicated promising bond strength results when compared to ZOE and MTA-Fillapex. The push-out bond strength of all sealers to dentin increased from the coronal to the apical third. [ABSTRACT FROM AUTHOR]

Background: The educational process in the field of endodontics commences with preclinical exercises to enhance students' proficiency in cleaning, shaping, and performing root canal fillings. Therefore, this study aimed to radiographically evaluate the technical quality of root canal fillings performed by preclinical students on extracted teeth at the College of Dentistry, University of Ha'il, Saudi Arabia. Methods: A total of 788 extracted human teeth received root canal treatment by undergraduate students. The samples were then gathered and radiographically assessed using the three quality criteria of length, density, and taper. The category of root canal fillings was classified as either acceptable or unacceptable. The criteria for evaluating the acceptability of filling quality were defined based on the presence of adequate length, density, and taper. The effectiveness of root canal fillings was also evaluated in relation to the tooth type, sex, and treatment year. The agreement between the examiners was evaluated using Cohen's kappa test, and the relationship between the research variables was determined using the chi-squared test. The significance threshold was set at 0. 05. Results: The overall quality of root filling was determined to be satisfactory in 532 (67.5%) of 788 endodontically treated extracted teeth. The majority of the research sample (88.1%) had enough length, 89.6% had adequate density, and 86.4% had acceptable taper. The quality of anterior teeth was substantially better than that of posterior teeth (p < 0.001). Our findings showed that the quality of root canals was better in 2022 than it had been in earlier years (p = 0.001). The three RCT quality criteria differed significantly when compared between sexes (p = 0.002). Conclusions: The quality of the root canal fillings completed by undergraduate students was rated as acceptable. The findings of the research suggest that the implementation of routine assessments to evaluate the technical competence of undergraduate dental students performing root canal treatments could provide significant insights into the efficacy of the curriculum requirements. [ABSTRACT FROM AUTHOR]

Tricalcium silicate-based cements exhibit several beneficial properties for dental health and biocompatibility, which can induce biomineralisation. To assess the sealing ability and intratubular penetration of tricalcium silicate-based sealers using warm and cold obturation techniques. An electronic search was conducted in PubMed, Scopus, and Web of Science databases for endodontically treated teeth with bioceramics and their sealing capacity in root canal obturation published up to February 2023. Of the 90 articles, 16 met the inclusion criteria, and only 10 were used for the meta -analysis, of which four addressed intratubular penetration, four addressed sealing capacity, and two addressed both variables. In the sealing capacity group, the meta -analysis concluded a standardised mean difference (SMD) of −1.31 in favour of the test group (warm) with a certain nonsignificant trend (p = 0.081); regarding intratubular penetration, the meta -analysis concluded an SMD = 2.34 in favour of the test group (warm) with significantly greater penetration (p = 0.032). The warm obturation technique introduced significantly greater intratubular penetration than the cold technique, along with a remarkably superior sealing capacity compared to the cold technique, approaching statistical significance. [ABSTRACT FROM AUTHOR]

Objective: The aim of this study was to evaluate the impact of filling irregularly bounded internal resorption cavities created by acid demineralization using different filling techniques on the quality of the filling. Methods: A total of 54 extracted single-rooted teeth were sectioned mesiodistally. Each tooth segment was subjected to 5% nitric acid for 12 hours followed by 8% sodium hypochlorite for 10 minutes. Samples were rinsed with distiled water between the two solutions. The demineralization protocol was renewed every 24 hours and applied for 11 days. At the end of the process, the teeth were reassembled, and randomly divided into six groups, each containing 9 samples: 1. Group 1: AH Plus + Cold Lateral Condensation Technique, 2. Group 2: AH Plus + Thermoplastic Injection Technique, 3. Group 3: T-Endo Bioserra + Cold Lateral Condensation Technique, 4. Group 4: T-Endo Bioserra + Thermoplastic Injection Technique, 5. Group 5: GuttaFlow 2, 6. Group 6: GuttaFlow 2 + Single-Cone Technique. Filling quality was evaluated by determining the percentage of gutta-percha, sealer, and remaining voids in the resorption cavities through stereomicroscopic examination. Results: The group filled with AH Plus sealer using the cold lateral condensation technique showed a significantly higher gutta-percha percentage compared to the other groups (p

Objective: The access cavity preparation technique might influence the fracture resistance of endodontically treated teeth. This study evaluated the impact of preserving the enamel-dentin bridge on fracture resistance of endodontically treated mandibular molars.Methods: A total of 42 mandibular molars were randomly divided into three groups according to the access cavity design: Traditional endodontic access cavity (TEC), truss endodontic access cavity (TREC), and control (CON) (n=14). The teeth in each group were divided into two equal subgroups (with and without thermocycling). The control group was stored in saline over the experiment, whereas class II mesio-occlusal access cavities were prepared in the two experimental groups. In the TEC design, a conventional access cavity was prepared. In the TREC design, the occlusal enamel and dentin between the mesial and distal root canal orifices were not removed. Endodontic treatment, and composite resin restoration were performed similarly in the experimental groups. The teeth were subjected to fracture resistance testing in an Instron machine and the load at fracture was compared among the groups.Results: The CON group had significantly superior fracture resistance than the two experimental groups (P0.05). Thermal cycling reduced fracture resistance in both TEC and TREC groups (P

This study aimed to evaluate and compare the quality of matching single-cone obturation using three different single-file systems—WaveOne® Gold (Dentsply Sirona, Bensheim, Germany), Reciproc® blue (VDW GmbH, Munich, Germany), and Procodile® (Komet Medical, Gebr. Brasseler GmbH & Co. KG, Lemgo, Germany). The evaluation focused on the percentage of gutta-percha-filled areas (PGFAs), sealer-filled areas (PSFAs), and unfilled areas (PUAs) across three different sections of curved and straight root canals. Sixty extracted human teeth were categorized into six groups. Based on radiographically determined root canal curvature, thirty curved and thirty straight root canals were prepared using the single-file systems according to the manufacturers’ instructions and obturated with matching gutta-percha cones using AH-Plus sealer. A total of 180 sections were evaluated digitally under the microscope and the results were statistically analyzed. The mean gutta-percha percentages for Reciproc® blue, Procodile®, and WaveOne® Gold were 83%, 82%, and 80%, respectively. No significant (p > 0.05) and relevant (ηp2 < 0.10) differences were found in the proportion of form-fitting gutta-percha cones between the systems in all sections. Similarly, canal anatomy showed no significant influence (p > 0.05). Ex vivo, all three systems showed comparable filling quality in all sections of curved and straight canals. Therefore, it can be concluded that all three file systems, in combination with their corresponding gutta-percha points, might be reliable methods for root canal obturation. Reciproc® Blue, Procodile®, and WaveOne® Gold consistently achieved comparable obturation results across various root configurations and levels of the root canal.

Prolonged exposure to elevated temperatures exceeding 47°C, which can occur during root canal obturation, can cause damage of both dental and bone tissues. In order to study the temperature distribution on the surface of the tooth root a temperature measuring device with cold-junction compensation is proposed. For in vitro measurement of the temperature distribution on the surface of the tooth, 8 thermocouples placed in direct contact with the cementum of the tooth were used. In order to eliminate the cold-junction temperature variations, the temperature equilibration device and RTD were used. The suggested linear approximation for the thermocouples' conversion function provides a nonlinearity relative error of less than 0.05% for K-type thermocouples and 0.07% for J-type thermocouples over the temperature range from 20 to 60°C.

Copyright of Dental Press Endodontics is the property of Dental Press International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Dental Press Endodontics is the property of Dental Press International and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Root canal filling is a necessary skill for dental students and an important aspect of endodontic education. This study aimed to evaluate the effect of students' clinical experiences on isthmus filling using different techniques and sealers. One hundred eight three-dimensional-printed resin replicas of isthmus were divided into six groups and either continuous wave of condensation (CWC) or single-cone obturation (SC) was performed. One of three sealers (AH Plus Jet®, GuttaFlow2, iRoot SP) was used together with a size-fitted gutta-percha master cone. All the obturations were completed by students with three different levels of clinical experience including senior postgraduate students (SPS), junior postgraduate students (JPS), and undergraduate students (US). The percentages of filled areas (PFA) at 2, 4, 6, and 8 mm from the apex were analyzed using a light microscope. Data were analyzed using the Mann-Whitney U test or Kruskal-Wallis 1-way ANOVA with Dunn's tests (α = 0.05). The CWC group exhibited a higher PFA than the SC group (P < 0.05). The PFA was higher in the SPS group than in the JPS group or the US group with CWC (P < 0.05). The three clinical experience groups showed similar PFAs with SC (P > 0.05); however, when using SC with iRoot SP, the PFA was higher than with either of the other two sealers (P < 0.05). CWC was found to be technique-sensitive and required clinical training. With SC, clinical experience did not improve the quality of isthmus filling without additional training. CWC was superior to SC for type IV isthmuses. When using SC, better filling quality was obtained with a bioceramic sealer. [ABSTRACT FROM AUTHOR]

Copyright of Universidade Estadual Paulista. Revista de Odontologia is the property of Universidade Estadual Paulista. Revista de Odontologia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This article discusses a temperature-measuring device for dentistry investigations, specifically during root canal obturation. The device uses thermocouples placed in direct contact with the tooth's cementum to measure temperature distribution. The article proposes a linear approximation function for thermocouples to reduce error and describes the design of the temperature measuring device. The findings suggest that the suggested linear approximation provides accurate temperature measurements with minimal nonlinearity error. The device utilizes a microprocessor to perform mathematical computations and transmit the results to a digital readout, which can be connected to a personal computer for further processing of the measurement results. [Extracted from the article]