Search

Purpose: Surgical complications during sinus floor elevation are frequently caused by septa in the maxillary sinus. In this study, the prevalence of septa was retrospectively determined via three-dimensional imaging to assess the necessity for appropriate imaging prior to sinus floor elevation. Materials and Methods: The cone-beam computed tomography scans of 1,029 consecutive patients were evaluated to assess the prevalence of septa, taking into account patient age and sex as well as the number and orientation of septa and their locations. If septa were present, the height was measured and the orientation was determined. Results: Septa were found in 47% of patients and 33.2% of sinuses. There was no statistical difference in prevalence with respect to age, sex, or side. Most patients with septa showed one septum in one sinus (24.6%); 13.7% showed one septum in each sinus. Other combinations (up to three septa per sinus) were found in 8.7% of patients. Septa were most commonly located in the first molar region (256 septa), followed by the second molar region (225 septa), the third molar region (144), second premolar region (136), the first premolar region (44), and the canine region (5). The mean septal height was 11.7 +/- 6.08 mm for septa in a sagittal orientation (n = 206, 25.3%; maximum height of 37 mm) and 7.3 +/- 5.08 mm for those oriented transversely (n = 608, 74.7%; maximum height of 36 mm). The variance was larger for the sagittal orientation group (37.03 mm) than for transversely oriented septa (25.9 mm). Conclusion: Septa were found in 47% of the patients in this sample. Appropriate imaging prior to performing sinus surgery seems justified, since complications and the success rate of sinus floor elevation are clearly related to the presence of septa. Int J Oral Maxillofac Implants 2010;25:258-265. [ABSTRACT FROM AUTHOR]

Purpose: Because vertical ridge augmentation with autogenous bone blocks carries with it a risk of graft resorption and donor site morbidity, the aim of the present study was to compare histologically the healing following vertical ridge augmentation using screwable, xenogenous deproteinized blocks or autologous bone blocks in dogs. Materials and Methods: Standardized vertical mandibular defects were surgically created in edentulous ridges of six foxhounds. Two bone blocks (6 x 10 x 15 mm) were inserted on each mandibular side and fixed with both a titanium implant and an osteosynthetic screw. Three different therapies were tested: (1) xenogenous block alone; (2) xenogenous block, covered with a chemically cross-linked collagen membrane; and (3) autologous blocks, harvested during defect preparation. After 3 months of submerged healing, the miniscrews were removed and replaced by dental implants. Following an additional healing period of 3 months, the animals were sacrificed, and dissected blocks were prepared for histomorphometric analysis. Results: During the primary healing period, three of 12 hemimandibles (six blocks) had to be removed because of severe inflammatory reactions (two xenogenous block sites with collagen membrane, one autologous block site). In general, histologic analysis revealed that xenogenous blocks, used alone or combined with a collagen membrane, exhibited osteoconductive properties on a level equivalent to that of autologous blocks, resulting in means of 50% to 60% of ossification of the blocks. Some parts of the xenograft were encased in soft tissue, partly surrounded by multinuclear giant cells. However, all groups showed obvious signs of bone/graft resorption. Conclusions: Within the limits of the present study, it was concluded that the examined screwable xenogenous bone block might be a useful scaffold for ridge augmentation procedures. However, the combination of xenogenous blocks with a cross-linked collagen membrane did not appear to improve outcomes. INT J ORAL MAXILLOFAC IMPLANTS 2009;24:243-250 [ABSTRACT FROM AUTHOR]

Copyright of Der MKG-Chirurg is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

OBJECTIVE: The aim of this study was to compare the performance of cone-beam computerized tomography (CBCT) with multislice CT (MSCT) and single photon emission CT (SPECT) in the detection of bone invasion from oral malignancies. STUDY DESIGN: In this prospective investigation, 77 patients with histologically proven malignancy of the oral cavity received MSCT, CBCT, and SPECT imaging of the head presurgically. Radiologic evaluations were compared with histopathologic examinations of the resected tumor specimens. Receiver operating characteristic (ROC) analysis as well as the sensitivity, specificity, and positive and negative predictive values were calculated. RESULTS: The sensitivity, specificity, positive predictive value, and negative predictive value for MSCT were 0.8, 1.0, 1.0, and 0.75, respectively; for CBCT 0.92, 0.965, 0.98, and 0.875; and for SPECT 0.91, 0.4, 0.7, and 0.75. ROC analysis showed area under the curve values of 0.894 (95% confidence interval [CI] 0.806-0.982) for MSCT; 0.931 (95% CI 0.835-1.000) for CBCT, and 0.716 (95% CI 0.566-0.866) for SPECT. CONCLUSION: CBCT is accurate in predicting malignancies' bone involvement and can compete with MSCT and SPECT in detecting bone invasion in patients with oral malignancies. [ABSTRACT FROM AUTHOR]

OBJECTIVES: The aim of the present case series was to evaluate the 2-year results obtained following treatment of peri-implantitis lesions using either a nanocrystalline hydroxyapatite (NHA) or a natural bone mineral in combination with a collagen membrane (NBM+CM). MATERIAL AND METHODS: Twenty-two patients suffering from moderate peri-implantitis (n=22 intra-bony defects) were randomly treated with (i) access flap surgery (AFS) and the application of NHA, or with AFS and the application of NBM+CM. Clinical parameters were recorded at baseline and after 12, 18, and 24 months of non-submerged healing. RESULTS: Two patients from the NHA group were excluded from the study due to severe pus formation at 12 months. At 24 months, both groups revealed clinically important probing depth (PD) reductions (NHA: 1.5+/-0.6 mm; NBM+CM: 2.4+/-0.8 mm) and clinical attachment level (CAL) gains (NHA: 1.0+/-0.4 mm; NBM+CM: 2.0+/-0.8 mm). However, these clinical improvements seemed to be better in the NBM+CM group (difference between groups: PD reduction: 0.9+/-0.2 mm; CAL gain: 1.0+/-0.3 mm). CONCLUSION: Both treatment procedures have shown efficacy over a period of 24 months, however, the application of NBM+CM may result in an improved outcome of healing. [ABSTRACT FROM AUTHOR]

Chiriac G, Herten M, Schwarz F, Rothamel D, Becker J. Autogenous bone chips: influence of a new piezoelectric device (Piezosurgery®) on chip morphology, cell viability and differentiation. J Clin Periodontol 2005; 32: 994–999. doi: 10.1111/j.1600-051X.2005.00809.x. © Blackwell Munksgaard, 2005. The aim of the present study was to investigate the influence of a new piezoelectric device, designed for harvesting autogenous bone chips from intra-oral sites, on chip morphology, cell viability and differentiation. A total of 69 samples of cortical bone chips were randomly gained by either (1) a piezoelectric device (PS), or (2) conventional rotating drills (RD). Shape and size of the bone chips were compared by means of morphometrical analysis. Outgrowing osteoblasts were identified by means of alkaline phosphatase activity (AP), immunhistochemical staining for osteocalcin (OC) synthesis and reverse transcriptase-polymerase chain reaction phenotyping. In 88.9% of the RD and 87.9% of the PS specimens, an outgrowth of adherent cells nearby the bone chips was observed after 6–19 days. Confluence of cells was reached after 4 weeks. Positive staining for AP and OC identified the cells as osteoblasts. The morphometrical analysis revealed a statistically significant more voluminous size of the particles collected with PS than RD. Within the limits of the present study, it may be concluded that both the harvesting methods are not different from each other concerning their detrimental effect on viability and differentiation of cells growing out of autogenous bone chips derived from intra-oral cortical sites. [ABSTRACT FROM AUTHOR]

Background/aim: Macrophages and biomaterial-induced multinucleated giant cells (BMGCs) are central elements in the tissue reaction cascade towards bone substitute materials (BSM). The enzymatic detection of the lytic enzyme tartrate-resistant acid phosphatase (TRAP) has manifoldly been used to examine the so-called "bioactivity" of BSM. The present study aimed to compare the detection validity and expression pattern of the TRAP enzyme using enzymatic and immunohistochemical detection methods in the context of biocompatibility analyses of BSM., Patients and Methods: Biopsies from 8 patients were analyzed after sinus augmentation with a xenogeneic bone substitute. Analysis of both macrophage and BMGC polarization were performed by histochemical TRAP detection and immunohistochemical detection of TRAP5a. Histomorphometrical analysis was used for comparison of the TRAP detection of BMGCs., Results: The enzymatic TRAP detection method revealed that in 7 out of 8 biopsies only single cells were TRAP-positive, whereas most of the cells and especially the BMGCs were TRAP-negative. The immunohistochemical detection of TRAP5a showed moderate numbers of stained mononuclear cells, while the majority of the BMGCs showed signs of TRAP5a-expression. The enzymatic TRAP detection was comparable to the results obtained via immunohistochemistry only in one case. The histomorphometrical analysis showed that significantly more mononuclear and multinucleated TRAP-positive cells were found using immunohistochemical TRAP5a-staining compared to the enzymatic TRAP detection method. Also, significantly more TRAP-negative BMGCs were found using the enzymatic TRAP detection., Conclusion: The immunohistochemical detection of TRAP is more accurate for examination of the bioactivity and cellular degradability of BSM., (Copyright © 2022, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Purpose: The collar region of an implant is its connection to the oral cavity. A balance between osseointegration on one hand and the absence of plaque accumulation on the other hand is necessary for successful implantation. It is yet to be determined which implant collar design, polished or rough, is best to stabilize the crestal bone level, avoiding peri-implantitis and subsequent risk of implant loss. The aim of this study was to investigate the influence of the architecture of the collar region on marginal bone and soft tissue response., Methods: This prospective, randomized, clinically controlled multicenter study included 58 patients undergoing dental implant treatment using a pair of dental implants with either machined or rough-surfaced shoulder regions. Patients were clinically and radiologically examined for bone level height and signs of inflammation after 6, 12 and 24 months., Results: No implant was lost within the 2 years of follow-up (100% survival rate). No significant differences on crestal bone loss (machined neck: 0.61 mm ± 0.28 mm, rough neck 0.58 mm ± 0.24 mm) and on soft tissue response (probing depth 3-6 mm with bleeding on probing 7.6% in machined-neck implants and in 8.3% in rough neck implants) were observed between implants with machined and roughened neck after 2 years., Conclusions: Machined and roughened neck implants achieved equally good results concerning peri-implant bone loss, the rate of peri-implantitis and implant survival rate/hard and soft tissue integration. None of the two collar designs showed a clear advantage in peri-implant reaction. Trial registration German Clinical Trials Register, DKRS00029033. Registered 09 May 2022-Retrospectively registered, http://www.dkrs.de., (© 2022. The Author(s).)

Nowadays, the most commonly used fixation systems are non-resorbable, but new resorbable magnesium alloy fixation screws have been introduced recently. Therefore, the aim of this study was to compare the magnesium fixation screw and the commonly used non-resorbable titanium screw in an animal model. Four 3-wall defect sites were covered with collagen membranes in the mandible of twenty beagle dogs (two sites on the left and two on the right). Each membrane was fixed with either four magnesium screws or four titanium screws. Post-operative follow-up revealed the expected observations such as transient inflammation and pain. Both groups showed a good healing response, with no differences between groups. Micro-CT analysis showed no significant difference between groups in terms of BV/TV or soft tissue volume. The void volume in the magnesium fixation screw group continued to decrease on average between the different timepoints, but not significantly. Furthermore, a gradual progression of the degradation process of the magnesium screws was observed in the same group. Magnesium screws and titanium screws showed equal performance in tissue regeneration according to GBR principles. An additional advantage of magnesium screws is their resorbable nature, which eliminates the need for a second surgical step to remove the screws.

For the surgical technique of guided bone regeneration (GBR), the choice of available barrier membranes has until recently not included an option that is mechanically strong, durable, synthetic and resorbable. The most commonly used resorbable membranes are made from collagen, which are restricted in their mechanical strength. The purpose of this study is to evaluate the degradation and regeneration potential of a magnesium membrane compared to a collagen membrane. In eighteen beagle dogs, experimental bone defects were filled with bovine xenograft and covered with either a magnesium membrane or collagen membrane. The health status of the animals was regularly monitored and recorded. Following sacrifice, the hemimandibles were prepared for micro-CT (μ-CT) analysis. Complications during healing were observed in both groups, but ultimately, the regenerative outcome was similar between groups. The μ-CT parameters showed comparable results in both groups in terms of new bone formation at all four time points. In addition, the μ-CT analysis showed that the greatest degradation of the magnesium membranes occurred between 1 and 8 weeks and continued until week 16. The proportion of new bone within the defect site was similar for both treatment groups, indicating the potential for the magnesium membrane to be used as a viable alternative to collagen membranes. Overall, the new magnesium membrane is a functional and safe membrane for the treatment of defects according to the principles of GBR.

An ideal fixation system for guided bone (GBR) regeneration in oral surgery must fulfil several criteria that includes the provision of adequate mechanical fixation, complete resorption when no longer needed, complete replacement by bone, as well as be biocompatible and have a good clinical manageability. For the first time, a biodegradable magnesium fixation screw made of the magnesium alloy WZM211 with a MgF 2 coating has been designed and tested to fulfill these criteria. Adequate mechanical fixation was shown for the magnesium fixation screw in several benchtop tests that directly compared the magnesium fixation screw with an equivalent polymeric resorbable device. Results demonstrated slightly superior mechanical properties of the magnesium device in comparison to the polymeric device even after 4 weeks of degradation. Biocompatibility of the magnesium fixation screw was demonstrated in several in vitro and in vivo tests. Degradation of the magnesium screw was investigated in in vitro and in vivo tests, where it was found that the screw is resorbed slowly and completely after 52 weeks, providing adequate fixation in the early critical healing phase. Overall, the magnesium fixation screw demonstrates all of the key properties required for an ideal fixation screw of membranes used in guided bone regeneration (GBR) surgeries., Competing Interests: The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:The following authors are employees of the company biotrics bioimplants AG (Frank Witte, Marco Bartosch) and botiss biomedical AG (Zeljka Peric Kacarevic, Patrick Rider, Drazen Tadic) which companies have financed the study.A CE mark has been successfully applied for the biodegradable magnesium barrier membrane using the published data in this manuscript., (© 2021 The Authors.)

Barrier membranes are commonly used as part of the dental surgical technique guided bone regeneration (GBR) and are often made of resorbable collagen or non-resorbable materials such as PTFE. While collagen membranes do not provide sufficient mechanical protection of the covered bone defect, titanium reinforced membranes and non-resorbable membranes need to be removed in a second surgery. Thus, biodegradable GBR membranes made of pure magnesium might be an alternative. In this study a biodegradable pure magnesium (99.95%) membrane has been proven to have all of the necessary requirements for an optimal regenerative outcome from both a mechanical and biological perspective. After implantation, the magnesium membrane separates the regenerating bone from the overlying, faster proliferating soft tissue. During the initial healing period, the membrane maintained a barrier function and space provision, whilst retaining the positioning of the bone graft material within the defect space. As the magnesium metal corroded, it formed a salty corrosion layer and local gas cavities, both of which extended the functional lifespan of the membrane barrier capabilities. During the resorption of the magnesium metal and magnesium salts, it was observed that the membrane became surrounded and then replaced by new bone. After the membrane had completely resorbed, only healthy tissue remained. The in vivo performance study demonstrated that the magnesium membrane has a comparable healing response and tissue regeneration to that of a resorbable collagen membrane. Overall, the magnesium membrane demonstrated all of the ideal qualities for a barrier membrane used in GBR treatment., Competing Interests: PR and ZP are employees of botiss biomaterials GmbH and FW is an employee of biotrics bioimplants AG.The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: The following authors are employees of the company biotrics bioimplants AG (Frank Witte, Marco Bartosch) and botiss biomedical AG (Zeljka Peric Kacarevic, Patrick Rider, Drazen Tadic) which companies have financed the study. A CE mark has been successfully applied for the biodegradable magnesium barrier membrane using the published data in this manuscript., (© 2021 The Authors.)

Purpose: Xenogeneic bone substitute materials are often used for augmentation of larger bone defects. Purification methods for these materials vary, mainly in terms of temperature. The aim of this study was to determine in vivo how sintering affects quantitative and qualitative bone regeneration of 2 bovine augmentation materials., Methods: A total of 56 critical size defects were set at the frontal bone of 14 domestic pigs (4 each) and filled randomly with either bovine, sintered hydroxyapatite (BO), bovine, non-sintered hydroxyapatite (BOS), local autologous bone (AB) or left empty. All defects were additionally covered with a collagen membrane. Specimens were harvested after 4 and 8 weeks and were evaluated histologically and histomorphometrically., Results: Histologically new bone could be seen in every group. Significantly highest new bone formation was found in AB. No significant difference could be detected between BO and BOS., Conclusions: According to the results of this study, sintered bone substitute material remains histologically distinguishable but does not affect quantitative and qualitative bone regeneration., (Copyright © 2021 The American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Background: The aim of this study was to compare new bone formation, resorbed bone matrix, and fibrous enclosed residual bone substitute material in laterally augmented alveolar bone defects using allogeneic, pre-treated and cleaned human bone blocks (tested in dogs, therefore considered to be xenogeneic), and pre-treated and cleaned bovine cancellous bone blocks, both with and without a collagen membrane in order to evaluate their augmentative potential., Methods: Thirty-two critical size horizontal defects were prepared in the mandible of 4 adult foxhound dogs (8 per dog, 4 on each side). After 3 months of healing, the defects were laterally augmented in a split-mouth-design with either human (HXB) or bovine solvent-preserved bone blocks (BXB). Afterwards, defects were randomly covered with a bovine collagenous membrane (HXB + M, BXB + M). After a healing interval of 6 months, percentages of new bone formation, resorbed bone matrix, and fibrous enclosed residual bone substitute material were compared., Results: Results showed little new bone formation of up to 3.7 % in human bone blocks (HXB 3.7 % ± 10.2, HXB + M 0.3 %± 0.4, BXB, 0.1 % ± 0.8, BXB + M 2.6 % ± 3.2, p = > 0.05). Percentages of fibrous encapsulation were higher in human bone blocks than in bovine bone blocks (HXB 71.2 % ± 8.6, HXB + M 73.71 % ± 10.6, BXB, 60.5 % ± 27.4, BXB + M 52.5 % ± 28.4, p = > 0.05). Resorption rates differed from 44.8 % in bovine bone blocks covered with a membrane to 17.4 % in human bone blocks (HXB 17.4 % ± 7.4, HXB + M 25.9 % ± 10.7, BXB, 38.4 % ± 27.2, BXB + M 44.8 % ± 29.6, p = > 0.05). The use of additional membranes did not significantly affect results., Conclusions: Within its limitations, results of this study suggest that solvent-preserved xenogenic human and bovine bone blocks are not suitable for lateral bone augmentation in dogs. Furthermore, defect coverage with a membrane does not positively affect the outcome.

Objectives: Biphasic calcium phosphate (BCP) is a bioceramic material successfully used in alloplastic bone augmentation. Despite many advantages, a disadvantage of BCP seems to be a difficult application and position instability. The aim of this study was to determine how different carrier materials influence BCP-induced quantitative and qualitative bone regeneration., Materials and Methods: A total of 70 critical size defects were set in the frontal bone of 14 domestic pigs (5 each) and filled randomly with either BCP alone (BCP), BCP in combination with nano-hydroxyapatite (BCP + NHA), BCP embedded in native porcine type I/III collagen blocks (BCP + C), autologous bone (AB), or were left empty (ED). Specimens were harvested after 4 and 8 weeks and were evaluated histologically as well as histomorphometrically., Results: Significantly lowest rate of new bone formation was found in ED (p = < 0.001) and BCP + NHA groups (p = 0.05). After 8 weeks, the highest percentage of new bone formation was observed in the BCP + C group. Fibrous matrix was detected highest in BCP alone. The lowest residual bone substitute material was found in BCP + C after 8 weeks., Conclusions: BCP-induced bone regeneration is indeed affected by different carrier types. Surface morphology and bioactive characteristics influence osseointegration and new bone formation in vivo. The combination of type I/III collagen seems most suitable for qualitative and quantitative bone regeneration., Clinical Relevance: Stabilization of granular bone substitutes using type I/III collagen might be an alternative to granulates alone, indicating excellent volume stability, satisfactory plasticity, and easy application.

Collagen-based barrier membranes are an essential component in Guided Bone Regeneration (GBR) procedures. They act as cell-occlusive devices that should maintain a micromilieu where bone tissue can grow, which in turn provides a stable bed for prosthetic implantation. However, the standing time of collagen membranes has been a challenging area, as native membranes are often prematurely resorbed. Therefore, consolidation techniques, such as chemical cross-linking, have been used to enhance the structural integrity of the membranes, and by consequence, their standing time. However, these techniques have cytotoxic tendencies and can cause exaggerated inflammation and in turn, premature resorption, and material failures. However, tissues from different extraction sites and animals are variably cross-linked. For the present in vivo study, a new collagen membrane based on bovine dermis was extracted and compared to a commercially available porcine-sourced collagen membrane extracted from the pericardium. The membranes were implanted in Wistar rats for up to 60 days. The analyses included well-established histopathological and histomorphometrical methods, including histochemical and immunohistochemical staining procedures, to detect M1- and M2-macrophages as well as blood vessels. Initially, the results showed that both membranes remained intact up to day 30, while the bovine membrane was fragmented at day 60 with granulation tissue infiltrating the implantation beds. In contrast, the porcine membrane remained stable without signs of material-dependent inflammatory processes. Therefore, the bovine membrane showed a special integration pattern as the fragments were found to be overlapping, providing secondary porosity in combination with a transmembraneous vascularization. Altogether, the bovine membrane showed comparable results to the porcine control group in terms of biocompatibility and standing time. Moreover, blood vessels were found within the bovine membranes, which can potentially serve as an additional functionality of barrier membranes that conventional barrier membranes do not provide.

To date, there are no bioresorbable alternatives to non-resorbable and volume-stable membranes in the field of dentistry for guided bone or tissue regeneration (GBR/GTR). Even magnesium (Mg) has been shown to constitute a favorable biomaterial for the development of stabilizing structures. However, it has been described that it is necessary to prevent premature degradation to ensure both the functionality and the biocompatibility of such Mg implants. Different coating strategies have already been developed, but most of them did not provide the desired functionality. The present study analyses a new approach based on ion implantation (II) with PVD coating for the passivation of a newly developed Mg membrane for GBR/GTR procedures. To demonstrate comprehensive biocompatibility and successful passivation of the Mg membranes, untreated Mg (MG) and coated Mg (MG-Co) were investigated in vitro and in vivo. Thereby a collagen membrane with an already shown biocompatibility was used as control material. All investigations were performed according to EN ISO 10993 regulations. The in vitro results showed that both the untreated and PVD-coated membranes were not cytocompatible. However, both membrane types fulfilled the requirements for in vivo biocompatibility. Interestingly, the PVD coating did not have an influence on the gas cavity formation compared to the uncoated membrane, but it induced lower numbers of anti-inflammatory macrophages in comparison to the pure Mg membrane and the collagen membrane. In contrast, the pure Mg membrane provoked an immune response that was fully comparable to the collagen membrane. Altogether, this study shows that pure magnesium membranes represent a promising alternative compared to the nonresorbable volume-stable materials for GBR/GTR therapy.

Background/aim: The aim of this study was the development of a new osteoconductivity index to determine the bone healing capacities of bone substitute materials (BSM) on the basis of 3D microcomputed tomographic (μ-CT) data., Materials and Methods: Sinus biopsies were used for the comparative analysis of the integration behavior of two xenogeneic BSM (cerabone® and Bio-Oss®). 3D μ-CT and data sets from histomorphometrical measurements based on 2D histological slices were used to measure the bone-material-contact and the tissue distribution within the biopsies. The tissue reactions to both BSM were microscopically analyzed., Results: The 3D and 2D results of the osteoconductivity measurements showed comparable material-bone contacts for both BSM, but the 2D data were significantly lower. The same results were found when tissue distribution was measured in both groups. The histopathological analysis showed comparative tissue reactions in both BSM., Conclusion: Osteoconductivity index is a reliable measurement parameter for determining the healing capacities of BSM. The observed differences between both measurement methods could be assigned to the resolution capacity of μ-CT data that did not allow for a precise interface distinction between both BSM and bone tissue. Histomorphometrical data based on histological slides still allow for a more exact evaluation., (Copyright© 2019, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.)

Objectives: The aim of this in vitro study was to evaluate osteotomy speed, heat development, and bone structure influence from osteotomies performed by various piezoelectric devices and insert tips. These devices and tips were compared among each other with regard to conventional rotatory and oscillating systems with special focus on the insert tip design and thickness., Material and Methods: The osteotomies were conducted on porcine ribs utilizing 12 different insert tips (straight and angulated) and three conventional systems. After time and temperature measurements, histological analysis was carried out. Light microscopy was used to evaluate the roughness of the osteotomic surface and to search for indications of thermal bone necrosis. A special software analyzing tool was employed to determine cutting width (mm) and debris (%)., Results: All piezoelectric tips created smooth cuts. Cutting widths in general were wider than the actual insert tip size with a tendency for narrow straight insert tips producing relatively wide osteotomies, whereas narrow angulated inserts produced relatively small osteotomies. None of the samples demonstrated distinct indication of necrosis. Overall, there was only a small amount of debris in all osteotomy gaps. Conventional rotatory saws were faster and created less heat compared to all tested piezoelectric systems. Straight tips proved faster osteotomy speed than angulated tips. Thin insert tips indicated to have a positive correlation to osteotomy time and performed faster than conventional microsaw. The average temperature rise was lower when using conventional systems, but critical exceeding temperatures were only observed in short-time exceptional cases. In general, temperature rise was less when using angulated inserts., Conclusion: All tested tips are appropriate for bone surgery. Only small differences were found among the piezoelectric insert tips. Although conventional rotatory systems in general performed faster osteotomies, special designed and thin piezoelectric insert tips seem to have a positive influence on osteotomy speed. Ultimately, none of the tested devices or inserts combined all best features of speed, heat development, bone structure influence, and safety., Clinical Relevance: Narrow and straight piezoelectric insert tips demonstrated reduced osteotomy times. Nevertheless, a combination of conventional and piezoelectric systems in clinical practice might be the best way to work time-efficient, patient-oriented, and safe. The choice of instrument should be based on clinical experience of the user and should be evaluated individually depending on the case.