Search

In the last decades, various events have shown that electromechanical oscillations are a major concern for large interconnected Alternating Current (AC) power systems. Segmentation of AC power systems with High Voltage Direct Current (HVDC) systems (DC segmentation, for short) is a method that consists in turning large AC grids into a set of asynchronous AC clusters linked by HVDC links. It is a promising solution to mitigate electromechanical oscillations and other issues. In particular, an appropriately placed DC segmentation can stop a selected inter-area electromechanical oscillation mode. However, without supplementary controllers, DC segmentation will not contribute to the damping of the intra-area oscillation modes in the remaining AC clusters and will deteriorate the frequency stability of the power system. This paper aims at filling this gap and proposes the use of DC segmentation with HVDC systems based on Voltage Source Converters (VSC-HVDC) with supplementary controllers in the converter stations: (a) active-power supplementary controllers for frequency support among the asynchronous AC clusters and (b) a reactive-power supplementary controllers for Power Oscillation Damping (POD-Q), in order to damp the intra-area oscillation modes. The proposed supplementary controllers and their design will be presented, and their efficiency will be demonstrated on the Nordic 44 test system with DC segmentation by means of non-linear time-domain simulation and small-signal stability analysis., Comment: arXiv admin note: text overlap with arXiv:2302.09931

Transient stability is a complex phenomenon presented in multi-machine and multi-converter systems, and it is still considered a key limiting factor for stressed power systems. The increasing integration of non-synchronous generation further emphasises the need to address the challenges of improving the transient stability faced by these power systems. Several studies have focused on developing control strategies for GFM-VSCs to improve transient stability. These strategies include the use of current limiting algorithms and/or control of active/reactive power injections. This paper investigates the impact of fast voltage boosters (FVBs) and hybrid current limiters (HCLs) on transient stability of power systems with 100% grid-forming VSC-based generators. Short-circuit simulations and critical clearing time analysis are performed to evaluate the effectiveness of HCLs and FVBs in improving transient stability. The simulation results demonstrate the effectiveness of these approaches in avoiding the loss of synchronism. This research contributes to the current studies on transient stability in power systems and provides valuable insights into the potential of HCLs and FVBs as effective approaches to improve system stability., Comment: 23 pages, 20 figures

In this paper, a novel approach to define the optimal bidding of renewable-only virtual power plants (RVPPs) in the day-ahead, secondary reserve, and intra-day markets is proposed. To this aim, a robust optimization algorithm is developed to account for the asymmetric nature of the uncertainties that characterize the market prices, as well as the energy production of the RVPP stochastic sources and flexible demand consumption. Simulation results show increased RVPP benefits compared to other existing solutions and demonstrate the potential of renewable sources to further increase their economic competitiveness. The simplicity of the implementation, the computational efficiency, and the flexible robustness are also verified.

Low-frequency oscillations are an inherent phenomena in transmission networks and renewable energy plants should be configured to damp them. Commonly, a centralised controller is used in PV plants to coordinate PV generators via communication channels. However, the communication systems of PV plants introduce delays of a stochastic nature that degrade the performance of centralised control algorithms. Therefore, controllers for oscillation damping may not operate correctly unless the communication channel characteristics are not considered and compensated. In this paper, a centralised controller is proposed for the oscillation damping that uses a PV plant with all the realistic effects of communication channels taken into consideration. The communication channels are modelled based on measurements taken in a laboratory environment. The controller is designed to damp several modes of oscillation by using the open-loop phase shift compensation. Theoretical developments were validated in a laboratory using four converters acting as two PV inverters, a battery and a STATCOM. A real-time processing platform was used to implement the centralised controller and to deploy the communication infrastructure. Experimental results show the communication channels impose severe restrictions on the performance of centralised POD controllers, highlighting the importance of their accurate modelling and consideration during the controller design stage.

Multi-terminal high-voltage Direct Current technology based on Voltage-Source Converter stations (VSC-MTDC) is expected to be one of the most important contributors to the future of electric power systems. In fact, among other features, it has already been shown how this technology can contribute to improve transient stability in power systems by the use of supplementary controllers. Along this line, this paper will investigate in detail how these supplementary controllers may affect electromechanical oscillations, by means of small-signal stability analysis. The paper analyses two control strategies based on the modulation of active-power injections (P-WAF) and reactive-power injections (Q-WAF) in the VSC stations. Both control strategies use global signals of the frequencies of the VSC-MTDC system and they presented significant improvements on transient stability. The paper will provide guidelines for the design of these type of controllers to improve both, large- and small-disturbance angle stability. Small-signal stability techniques (in Matlab) will be used to assess electromechanical-oscillation damping, while non-linear time domain simulation (in PSS/E) will be used to confirm the results. Results will be illustrated in Nordic32A test system with an embedded VSC-MTDC system. The paper analyses the impact of the controller gains and communication latency on electromechanical-oscillation damping. The main conclusion of the paper is that transient-stability-tailored supplementary controllers in VSC-MTDC systems can be tuned to damp inter-area oscillations too, maintaining their effectiveness for transient-stability improvement.

In this paper, an approach to evaluate the benefits of demand flexibility for Virtual Power Plants (VPPs) is presented. The flexible demands chosen in this study are part of a renewable energy source-based VPP that participates in Day-Ahead Market (DAM) and Intra-Day Market (IDM) and has dispatchable and non-dispatchable assets. A demand model with bi-level flexibility is proposed: the first level is associated with DAM, whereas the second level is related to IDM sessions. Simulations are carried out considering a 12-node network to ascertain the eventual impacts of modeling demand flexibility on VPP operation. The market structure considered in the case study resembles the different trading floors in the Spanish electricity market. Results obtained show that the proposed demand flexibility scheme increases the overall profit of the VPP, as well as the revenues of the demand owners without disrupting consumers' comfort., Comment: 5 pages, 5 figures, conference. arXiv admin note: substantial text overlap with arXiv:2112.02200

In this work, we present a detailed model of a Renewable Energy Source (RES)-based Virtual Power Plant (VPP) that participates in Day-Ahead Market (DAM) and Intra-Day Market (IDM) with dispatchable and non-dispatchable RESs and flexible demand assets. We propose a demand model with bi-level flexibility which are associated with the market sessions plus an improved solar thermal plant model with piece-wise linear formulation of efficiency. A network-constrained unit commitment model is used by the VPP to submit DAM auctions and consequently participates in IDM to correct for deviations. Finally, we validate our model by assessing its operation on different weather conditions of uncertainty., Comment: 7pages, 10 figures, conference

Grid-forming voltage source converter (GF-VSC) has been identified as the key technology for the operation of future converter-dominated power systems. Among many other issues, transient stability of this type of power systems remains an open topic of research because it is still a key limiting factor for stressed power systems. Previous studies have proposed control strategies for GF-VSC to improve transient stability of this type of systems by suitable current-limitation algorithms and/or control of active-power injections. As an alternative, this paper proposes two fast voltage boosters to improve transient stability of power systems with 100% of GF-VSC-based generation with virtual synchronous machine (VSM). One control strategy uses local measurements, whereas the other one uses global measurements of the frequency of the centre of inertia (COI). Both strategies improve transient stability of this type of systems significantly. The advantage of using fast voltage boosters for this purpose is that the set points linked to frequency/active-power injection (i.e set points linked to the primary energy source of the VSCs) will not be modified. Furthermore, strategies such as current-limitation, active-power control and fast voltage controllers for transient stability improvement are compatible and complementary.

High voltage direct current links based on voltage source converters (VSC-HVDC) embedded in alternating current (AC) systems are receiving a great deal of attention recently because they can contribute positively to the flexibilisation of modern power systems. Among several possibilities, AC-line-emulation control has been highlighted as an simple-but-useful alternative for these type of systems. With this strategy, the power flow through the link is controlled proportionally to the angle difference between its two AC terminals and this provides self-adaptation of the power flow in case of contingencies in the parallel AC lines, naturally. Although this controller is mainly concerned with steady state, it can also have an impact on the dynamic behaviour of the system, which has not been sufficiently analysed. Along this line, this paper analyses the impact of AC-line-emulation controllers of VSC-HVDC on power system transient stability. Nonlinear time-domain simulations were carried out by using PSS/E on a small test system with an embedded point-to-point VSC-HVDC link. The critical clearing time (CCT) of a test fault has been used to assess transient-stability margins of the whole system. The paper provides recommendations for the design of AC-line-emulation controllers in order to ensure that transient stability is not jeopardised., Comment: conference