Search

Time-delay cosmography uses strong gravitational lensing of a time-variable source to infer the Hubble Constant. The measurement is independent from both traditional distance ladder and CMB measurements. An accurate measurement with this technique requires considering the effects of objects along the line of sight outside the primary lens, which is quantified by the external convergence ($\kappa_{\rm{ext}}$). In absence of such corrections, $H_0$ will be biased towards higher values in overdense fields and lower values in underdense fields. We discuss the current state of the methods used to account for environment effects. We present a new software package built for this kind of analysis and others that can leverage large astronomical survey datasets. We apply these techniques to the SDSS J0924+0219 strong lens field. We infer the relative density of the SDSS J0924+0219 field by computing weighted number counts for all galaxies in the field, and comparing to weighted number counts computed for a large number of fields in a reference survey. We then compute weighted number counts in the Millennium Simulation and compare these results to infer the external convergence of the lens field.Results. Our results show the SDSS J0924+0219 field is a fairly typical line of sight, with median $\kappa_{\rm{ext}} = -0.012$ and standard deviation $\sigma_{\kappa} = 0.028$., Comment: Submitted to A&A. 10 pages, 5 figures

The importance of alternative methods for measuring the Hubble constant, such as time-delay cosmography, is highlighted by the recent Hubble tension. It is paramount to thoroughly investigate and rule out systematic biases in all measurement methods before we can accept new physics as the source of this tension. In this study, we perform a check for systematic biases in the lens modelling procedure of time-delay cosmography by comparing independent and blind time-delay predictions of the system WGD 2038-4008 from two teams using two different software programs: GLEE and LENSTRONOMY. The predicted time delays from the two teams incorporate the stellar kinematics of the deflector and the external convergence from line-of-sight structures. The un-blinded time-delay predictions from the two teams agree within $1.2\sigma$, implying that once the time delay is measured the inferred Hubble constant will also be mutually consistent. However, there is a $\sim$4$\sigma$ discrepancy between the power-law model slope and external shear, which is a significant discrepancy at the level of lens models before the stellar kinematics and the external convergence are incorporated. We identify the difference in the reconstructed point spread function (PSF) to be the source of this discrepancy. When the same reconstructed PSF was used by both teams, we achieved excellent agreement, within $\sim$0.6$\sigma$, indicating that potential systematics stemming from source reconstruction algorithms and investigator choices are well under control. We recommend that future studies supersample the PSF as needed and marginalize over multiple algorithms or realizations for the PSF reconstruction to mitigate the systematics associated with the PSF. A future study will measure the time delays of the system WGD 2038-4008 and infer the Hubble constant based on our mass models., Comment: Accepted version by A&A. 34 pages, 26 figures, 3 tables

We present a lensed quasar search based on the variability of lens systems in the HSC transient survey. Starting from 101,353 variable objects with i-band photometry in the HSC transient survey, we used a variability-based lens search method measuring the spatial extent in difference images to select potential lensed quasar candidates. We adopted conservative constraints in this variability selection and obtained 83,657 variable objects as possible lens candidates. We then ran CHITAH, a lens search algorithm based on the image configuration, on those 83,657 variable objects, and 2,130 variable objects were identified as potential lensed objects. We visually inspected the 2,130 variable objects, and seven of them are our final lensed quasar candidates. Additionally, we found one lensed galaxy candidate as a serendipitous discovery. Among the eight final lensed candidates, one is the only known quadruply lensed quasar in the survey field, HSCJ095921+020638. None of the other seven lensed candidates have been previously classified as a lens nor a lensed candidate. Three of the five final candidates with available HST images, including HSCJ095921+020638, show clues of a lensed feature in the HST images. A tightening of variability selection criteria might result in the loss of possible lensed quasar candidates, especially the lensed quasars with faint brightness or narrow separation, without efficiently eliminating the non-lensed objects; CHITAH is therefore important as an advanced examination to improve the lens search efficiency through the object configuration. The recovery of HSCJ095921+020638 proves the effectiveness of the variability-based lens search method, and this lens search method can be used in other cadenced imaging surveys, such as the upcoming Rubin Observatory Legacy Survey of Space and Time., Comment: 12 pages, 6 figures, accepted for publication in A&A

The H0LiCOW collaboration inferred via gravitational lensing time delays a Hubble constant $H_0=73.3^{+1.7}_{-1.8}$ km s$^{-1}{\rm Mpc}^{-1}$, describing deflector mass density profiles by either a power-law or stars plus standard dark matter halos. The mass-sheet transform (MST) that leaves the lensing observables unchanged is considered the dominant source of residual uncertainty in $H_0$. We quantify any potential effect of the MST with flexible mass models that are maximally degenerate with H0. Our calculation is based on a new hierarchical approach in which the MST is only constrained by stellar kinematics. The approach is validated on hydrodynamically simulated lenses. We apply the method to the TDCOSMO sample of 7 lenses (6 from H0LiCOW) and measure $H_0=74.5^{+5.6}_{-6.1}$ km s$^{-1}{\rm Mpc}^{-1}$. In order to further constrain the deflector mass profiles, we then add imaging and spectroscopy for 33 strong gravitational lenses from the SLACS sample. For 9 of the SLAC lenses we use resolved kinematics to constrain the stellar anisotropy. From the joint analysis of the TDCOSMO+SLACS sample, we measure $H_0=67.4^{+4.1}_{-3.2}$ km s$^{-1}{\rm Mpc}^{-1}$, assuming that the TDCOSMO and SLACS galaxies are drawn from the same parent population. The blind H0LiCOW, TDCOSMO-only and TDCOSMO+SLACS analyses are in mutual statistical agreement. The TDCOSMO+SLACS analysis prefers marginally shallower mass profiles than H0LiCOW or TDCOSMO-only. While our new analysis does not statistically invalidate the mass profile assumptions by H0LiCOW, and thus their $H_0$ measurement relying on those, it demonstrates the importance of understanding the mass density profile of elliptical galaxies. The uncertainties on $H_0$ derived in this paper can be reduced by physical or observational priors on the form of the mass profile, or by additional data, chiefly spatially resolved kinematics of lens galaxies., Comment: accepted by A&A. Full analysis available at https://github.com/TDCOSMO/hierarchy_analysis_2020_public updated permanent analysis script links

We investigate the environment and line of sight of the H0LiCOW lens B1608+656 using Subaru Suprime-Cam and the Hubble Space Telescope (HST) to perform a weak lensing analysis. We compare three different methods to reconstruct the mass map of the field, i.e. the standard Kaiser-Squires inversion coupled with inpainting and Gaussian or wavelet filtering, and $\tt{Glimpse}$ a method based on sparse regularization of the shear field. We find no substantial difference between the 2D mass reconstructions, but we find that the ground-based data is less sensitive to small-scale structures than the space-based observations. Marginalising over the results obtained with all the reconstruction techniques applied to the two available HST filters F606W and F814W, we estimate the external convergence, $\kappa_{\rm ext}$ at the position of B1608+656 is $\kappa_{\rm ext} = 0.11^{+0.06}_{-0.04}$, where the error bars corresponds respectively to the 16th and 84th quartiles. This result is compatible with previous estimates using the number-counts technique, suggesting that B1608+656 resides in an over-dense line of sight, but with a completely different technique. Using our mass reconstructions, we also compare the convergence at the position of several groups of galaxies in the field of B1608+656 with the mass measurements using various analytical mass profiles, and find that the weak lensing results favor truncated halo models., Comment: Accepted MNRAS

In time-delay cosmography, three of the key ingredients are 1) determining the velocity dispersion of the lensing galaxy, 2) identifying galaxies and groups along the line of sight with sufficient proximity and mass to be included in the mass model, and 3) estimating the external convergence $\kappa_\mathrm{ext}$ from less massive structures that are not included in the mass model. We present results on all three of these ingredients for two time-delay lensed quasar systems, DES J0408-5354 and WGD 2038-4008. We use the Gemini, Magellan and VLT telescopes to obtain spectra to both measure the stellar velocity dispersions of the main lensing galaxies and to identify the line-of-sight galaxies in these systems. Next, we identify 10 groups in DES J0408-5354 and 2 groups in WGD 2038-4008using a group-finding algorithm. We then identify the most significant galaxy and galaxy-group perturbers using the "flexion shift" criterion. We determine the probability distribution function of the external convergence $\kappa_\mathrm{ext}$ for both of these systems based on our spectroscopy and on the DES-only multiband wide-field observations. Using weighted galaxy counts, calibrated based on the Millennium Simulation, we find that DES J0408-5354 is located in a significantly underdense environment, leading to a tight (width $\sim3\%$), negative-value $\kappa_\mathrm{ext}$ distribution. On the other hand, WGD 2038-4008 is located in an environment of close to unit density, and its low source redshift results in a much tighter $\kappa_\mathrm{ext}$ of $\sim1\%$, as long as no external shear constraints are imposed., Comment: 40 pages, 18 figures Added missing author to the author list

We report the results of the STRong lensing Insights from the Dark Energy Survey (STRIDES) follow-up campaign of the late 2017/early 2018 season. We obtained spectra of 65 lensed quasar candidates either with EFOSC2 on the NTT or ESI on Keck, which confirm 10 new gravitationally lensed quasars and 10 quasar pairs with similar spectra, but which do not show a lensing galaxy in DES images. Eight lensed quasars are doubly imaged with source redshifts between 0.99 and 2.90, one is triply imaged by a group (DESJ0345-2545, $z=1.68$), and one is quadruply imaged (quad: DESJ0053-2012, $z=3.8$). Singular isothermal ellipsoid models for the doubles, based on high-resolution imaging from SAMI on SOAR or NIRC2 on Keck, give total magnifications between 3.2 and 5.6, and Einstein radii between 0.49 and 1.97 arcseconds. After spectroscopic follow-up, we extract multi-epoch $grizY$ photometry of confirmed lensed quasars and contaminant quasar+star pairs from the first 4 years of DES data using parametric multi-band modelling, and compare variability in each system's components. By measuring the reduced ${\chi}^2$ associated with fitting all epochs to the same magnitude, we find a simple cut on the less variable component that retains all confirmed lensed quasars, while removing 94 per cent of contaminant systems with stellar components. Based on our spectroscopic follow-up, this variability information can improve selection of lensed quasars and quasar pairs from 34-45 per cent to 51-70 per cent, with the majority of remaining contaminants being compact star-forming galaxies. Using mock lensed quasar lightcurves we demonstrate that selection based only on variability will over-represent the quad fraction by 10 per cent over a complete DES magnitude-limited sample (excluding microlensing differences), explained by the magnification bias and hence lower luminosity (more variable) sources in quads., Comment: 22 pages, 16 figures, submitted to MNRAS

Time-delay cosmography of lensed quasars has achieved 2.4% precision on the measurement of the Hubble constant, $H_0$. As part of an ongoing effort to uncover and control systematic uncertainties, we investigate three potential sources: 1- stellar kinematics, 2- line-of-sight effects, and 3- the deflector mass model. To meet this goal in a quantitative way, we reproduced the H0LiCOW/SHARP/STRIDES (hereafter TDCOSMO) procedures on a set of real and simulated data, and we find the following. First, stellar kinematics cannot be a dominant source of error or bias since we find that a systematic change of 10% of measured velocity dispersion leads to only a 0.7% shift on $H_0$ from the seven lenses analyzed by TDCOSMO. Second, we find no bias to arise from incorrect estimation of the line-of-sight effects. Third, we show that elliptical composite (stars + dark matter halo), power-law, and cored power-law mass profiles have the flexibility to yield a broad range in $H_0$ values. However, the TDCOSMO procedures that model the data with both composite and power-law mass profiles are informative. If the models agree, as we observe in real systems owing to the "bulge-halo" conspiracy, $H_0$ is recovered precisely and accurately by both models. If the two models disagree, as in the case of some pathological models illustrated here, the TDCOSMO procedure either discriminates between them through the goodness of fit, or it accounts for the discrepancy in the final error bars provided by the analysis. This conclusion is consistent with a reanalysis of six of the TDCOSMO (real) lenses: the composite model yields $74.0^{+1.7}_{-1.8}$ $km.s^{-1}.Mpc^{-1}$, while the power-law model yields $H_0=74.2^{+1.6}_{-1.6}$ $km.s^{-1}.Mpc^{-1}$. In conclusion, we find no evidence of bias or errors larger than the current statistical uncertainties reported by TDCOSMO., Comment: 19 pages, 9 figures, 4 tables, published in A&A

We present a blind time-delay cosmographic analysis for the lens system DES J0408$-$5354. This system is extraordinary for the presence of two sets of multiple images at different redshifts, which provide the opportunity to obtain more information at the cost of increased modelling complexity with respect to previously analyzed systems. We perform detailed modelling of the mass distribution for this lens system using three band Hubble Space Telescope imaging. We combine the measured time delays, line-of-sight central velocity dispersion of the deflector, and statistically constrained external convergence with our lens models to estimate two cosmological distances. We measure the "effective" time-delay distance corresponding to the redshifts of the deflector and the lensed quasar $D_{\Delta t}^{\rm eff}=3382^{+146}_{-115}$ Mpc and the angular diameter distance to the deflector $D_{\rm d}=1711^{+376}_{-280}$ Mpc, with covariance between the two distances. From these constraints on the cosmological distances, we infer the Hubble constant $H_0 = 74.2^{+2.7}_{-3.0}$ km s$^{-1}$ Mpc$^{-1}$ assuming a flat $\Lambda$CDM cosmology and a uniform prior for $\Omega_{\rm m}$ as $\Omega_{\rm m} \sim \mathcal{U}(0.05, 0.5)$. This measurement gives the most precise constraint on $H_0$ to date from a single lens. Our measurement is consistent with that obtained from the previous sample of six lenses analyzed by the $H_0$ Lenses in COSMOGRAIL's Wellspring (H0LiCOW) collaboration. It is also consistent with measurements of $H_0$ based on the local distance ladder, reinforcing the tension with the inference from early Universe probes, for example, with 2.2$\sigma$ discrepancy from the cosmic microwave background measurement., Comment: 32 pages, 17 figures, 10 tables. Accepted by MNRAS

Context. The precise determination of the present-day expansion rate of the Universe, expressed through the Hubble constant $H_0$, is one of the most pressing challenges in modern cosmology. Assuming flat $\Lambda$CDM, $H_0$ inference at high redshift using cosmic-microwave-background data from Planck disagrees at the 4.4$\sigma$ level with measurements based on the local distance ladder made up of parallaxes, Cepheids and Type Ia supernovae (SNe Ia), often referred to as "Hubble tension". Independent, cosmological-model-insensitive ways to infer $H_0$ are of critical importance. Aims. We apply an inverse-distance-ladder approach, combining strong-lensing time-delay-distance measurements with SN Ia data. By themselves, SNe Ia are merely good relative distance indicators, but by anchoring them to strong gravitational lenses one can obtain an $H_0$ measurement that is relatively insensitive to other cosmological parameters. Methods. A cosmological parameter estimate is performed for different cosmological background models, both for strong-lensing data alone and for the combined lensing + SNe Ia data sets. Results. The cosmological-model dependence of strong-lensing $H_0$ measurements is significantly mitigated through the inverse distance ladder. In combination with SN Ia data, the inferred $H_0$ consistently lies around 73-74 km s$^{-1}$ Mpc$^{-1}$, regardless of the assumed cosmological background model. Our results agree nicely with those from the local distance ladder, but there is a >2$\sigma$ tension with Planck results, and a ~1.5$\sigma$ discrepancy with results from an inverse distance ladder including Planck, Baryon Acoustic Oscillations and SNe Ia. Future strong-lensing distance measurements will reduce the uncertainties in $H_0$ from our inverse distance ladder., Comment: 5 pages, 3 figures, A&A letters accepted version

Galaxies and galaxy groups located along the line of sight towards gravitationally lensed quasars produce high-order perturbations of the gravitational potential at the lens position. When these perturbation are too large, they can induce a systematic error on $H_0$ of a few-percent if the lens system is used for cosmological inference and the perturbers are not explicitly accounted for in the lens model. In this work, we present a detailed characterization of the environment of the lens system WFI2033-4723 ($z_{\rm src} = 1.662$, $z_{\rm lens}$ = 0.6575), one of the core targets of the H0LICOW project for which we present cosmological inferences in a companion paper (Rusu et al. 2019). We use the Gemini and ESO-Very Large telescopes to measure the spectroscopic redshifts of the brightest galaxies towards the lens, and use the ESO-MUSE integral field spectrograph to measure the velocity-dispersion of the lens ($\sigma_{\rm {los}}= 250^{+15}_{-21}$ km/s) and of several nearby galaxies. In addition, we measure photometric redshifts and stellar masses of all galaxies down to $i < 23$ mag, mainly based on Dark Energy Survey imaging (DR1). Our new catalog, complemented with literature data, more than doubles the number of known galaxy spectroscopic redshifts in the direct vicinity of the lens, expanding to 116 (64) the number of spectroscopic redshifts for galaxies separated by less than 3 arcmin (2 arcmin) from the lens. Using the flexion-shift as a measure of the amplitude of the gravitational perturbation, we identify 2 galaxy groups and 3 galaxies that require specific attention in the lens models. The ESO MUSE data enable us to measure the velocity-dispersions of three of these galaxies. These results are essential for the cosmological inference analysis presented in Rusu et al. (2019)., Comment: Matches the version accepted for publication by MNRAS. Note that this paper previously appeared as H0LICOW XI

We present new measurements of the time delays of WFI2033-4723. The data sets used in this work include 14 years of data taken at the 1.2m Leonhard Euler Swiss telescope, 13 years of data from the SMARTS 1.3m telescope at Las Campanas Observatory and a single year of high-cadence and high-precision monitoring at the MPIA 2.2m telescope. The time delays measured from these different data sets, all taken in the R-band, are in good agreement with each other and with previous measurements from the literature. Combining all the time-delay estimates from our data sets results in Dt_AB = 36.2-0.8+0.7 days (2.1% precision), Dt_AC = -23.3-1.4+1.2 days (5.6%) and Dt_BC = -59.4-1.3+1.3 days (2.2%). In addition, the close image pair A1-A2 of the lensed quasars can be resolved in the MPIA 2.2m data. We measure a time delay consistent with zero in this pair of images. We also explore the prior distributions of microlensing time-delay potentially affecting the cosmological time-delay measurements of WFI2033-4723. There is however no strong indication in our measurements that microlensing time delay is neither present nor absent. This work is part of a H0LiCOW series focusing on measuring the Hubble constant from WFI2033-4723., Comment: Submitted to Astronomy and Astrophysics

We present a blind time-delay strong lensing (TDSL) cosmographic analysis of the doubly imaged quasar SDSS 1206+4332. We combine the relative time delay between the quasar images, Hubble Space Telescope imaging, the Keck stellar velocity dispersion of the lensing galaxy, and wide-field photometric and spectroscopic data of the field to constrain two angular diameter distance relations. The combined analysis is performed by forward modelling the individual data sets through a Bayesian hierarchical framework, and it is kept blind until the very end to prevent experimenter bias. After unblinding, the inferred distances imply a Hubble constant $H_0 = 68.8^{+5.4}_{-5.1}$ kms$^{-1}$Mpc$^{-1}$, assuming a flat Lambda cold dark matter cosmology with uniform prior on $\Omega_{\rm m}$ in [0.05, 0.5]. The precision of our cosmographic measurement with the doubly imaged quasar SDSS 1206+4332 is comparable with those of quadruply imaged quasars and opens the path to perform on selected doubles the same analysis as anticipated for quads. Our analysis is based on a completely independent lensing code than our previous three H0LiCOW systems and the new measurement is fully consistent with those. We provide the analysis scripts paired with the publicly available software to facilitate independent analysis. The consistency between blind measurements with independent codes provides an important sanity check on lens modelling systematics. By combining the likelihoods of the four systems under the same prior, we obtain $H_0 = 72.5^{+2.1}_{-2.3}$kms$^{-1}$Mpc$^{-1}$. This measurement is independent of the distance ladder and other cosmological probes., Comment: 30 pages, 17 figures, MNRAS published likelihood available here: http://shsuyu.github.io/H0LiCOW/site/notebooks/H0_from_lenses.html, all modeling and analysis scripts available upon request

The primary goals of the STRong lensing Insights into the Dark Energy Survey (STRIDES) collaboration are to measure the dark energy equation of state parameter and the free streaming length of dark matter. To this aim, STRIDES is discovering strongly lensed quasars in the imaging data of the Dark Energy Survey and following them up to measure time delays, high resolution imaging, and spectroscopy sufficient to construct accurate lens models. In this paper, we first present forecasts for STRIDES. Then, we describe the STRIDES classification scheme, and give an overview of the Fall 2016 follow-up campaign. We continue by detailing the results of two selection methods, the Outlier Selection Technique and a morphological algorithm, and presenting lens models of a system, which could possibly be a lensed quasar in an unusual configuration. We conclude with the summary statistics of the Fall 2016 campaign. Including searches presented in companion papers (Anguita et al.; Ostrovski et al.), STRIDES followed up 117 targets identifying 7 new strongly lensed systems, and 7 nearly identical quasars (NIQs), which could be confirmed as lenses by the detection of the lens galaxy. 76 candidates were rejected and 27 remain otherwise inconclusive, for a success rate in the range 6-35\%. This rate is comparable to that of previous searches like SQLS even though the parent dataset of STRIDES is purely photometric and our selection of candidates cannot rely on spectroscopic information., Comment: (MNRAS in press; color scheme of Figures 1-4 improved with respect to v1)

Strong-gravitational lens systems with quadruply-imaged quasars (quads) are unique probes to address several fundamental problems in cosmology and astrophysics. Although they are intrinsically very rare, ongoing and planned wide-field deep-sky surveys are set to discover thousands of such systems in the next decade. It is thus paramount to devise a general framework to model strong-lens systems to cope with this large influx without being limited by expert investigator time. We propose such a general modelling framework (implemented with the publicly available software Lenstronomy) and apply it to uniformly model three-band Hubble Space Telescope Wide Field Camera 3 images of 13 quads. This is the largest uniformly modelled sample of quads to date and paves the way for a variety of studies. To illustrate the scientific content of the sample, we investigate the alignment between the mass and light distribution in the deflectors. The position angles of these distributions are well-aligned, except when there is strong external shear. However, we find no correlation between the ellipticity of the light and mass distributions. We also show that the observed flux-ratios between the images depart significantly from the predictions of simple smooth models. The departures are strongest in the bluest band, consistent with microlensing being the dominant cause in addition to millilensing. Future papers will exploit this rich dataset in combination with ground based spectroscopy and time delays to determine quantities such as the Hubble constant, the free streaming length of dark matter, and the normalization of the initial stellar mass function., Comment: 22 pages, 9 figures, 8 tables, Accepted to MNRAS. This version: updated Table 4 from the erratum

We present the discovery of a gravitationally lensed dust-reddened QSO at $z=2.517$ discovered in a survey for red QSOs by infrared selection. $Hubble~Space~Telescope$ imaging in the WFC3/IR F160W and F125W filters reveals a quadruply lensed system in a cusp configuration. We find that compared to the central image of the cusp, the nearby, brightest image is anomalous by a factor of $\sim7-11$. Although the source is extremely bright in the mid-infrared, a magnification by a factor of $\sim50-120$ places an upper limit of 1.35 mJy on the intrinsic mid-infrared brightness, well below the $WISE~W4$ detection limit of 6 mJy. We find that this QSO is moderately reddened, with $E(B-V)=0.7$ and that $\sim1\%$ of the intrinsic spectrum is leaked back into the line of sight resulting in an upturn in its UV spectrum. We conclude that the QSO's reddening is intrinsic and not due to the lens. Consistent with previous red quasar samples, this source exhibits outflows in its spectrum as well as morphological properties suggestive of it being in a merger-driven transitional phase. Depending on how $L_{\rm bol}$ is computed, the quasar's accretion rate may be as high as $0.26~L_{\rm Edd}$. We detect two Lyman limit systems, at $z=2.102$ and $z=2.431$, with absorption by metal lines likely at small impact parameter to the QSO, and a putative lens redshift of $z=0.599$. Given the rarity of quad lenses, the discovery of this source allows detailed study of a less luminous, more typical infrared-selected quasar at high redshift., Comment: Submitted to the Astrophysical Journal. 15 pages, 8 Figures, 6 tables

We report upon the follow up of 34 candidate lensed quasars found in the Dark Energy Survey using NTT-EFOSC, Magellan-IMACS, KECK-ESI and SOAR-SAMI. These candidates were selected by a combination of double component fitting, morphological assessment and color analysis. Most systems followed up are indeed composed of at least one quasar image and 13 with two or more quasar images: two lenses, four projected binaries and seven Nearly Identical Quasar Pairs (NIQs). The two systems confirmed as genuine gravitationally lensed quasars are one quadruple at $z_s=1.713$ and one double at $z_s=1.515$. Lens modeling of these two systems reveals that both systems require very little contribution from the environment to reproduce the image configuration. Nevertheless, small flux anomalies can be observed in one of the images of the quad. Further observations of 9 inconclusive systems (including 7 NIQs) will allow to confirm (or not) their gravitational lens nature., Comment: 13 pages, 8 figures. MNRAS submitted (05/24). Approved by the DES Collaboration Wide Review

We present a weak gravitational lensing measurement of the external convergence along the line of sight to the quadruply lensed quasar HE$\,$0435$-$1223. Using deep r-band images from Subaru-Suprime-Cam we observe galaxies down to a 3$\sigma$ limiting magnitude of $\sim 26$ mags resulting in a source galaxy density of 14 galaxies / arcmin$^2$ after redshift-based cuts. Using an inpainting technique and Multi-Scale Entropy filtering algorithm, we find that the region in close proximity to the lens has an estimated external convergence of $\kappa=-0.012^{+0.020}_{-0.013}$ and is hence marginally under-dense. We also rule out the presence of any halo with a mass greater than $M_{\rm vir}=1.6\times10^{14}h^{-1}M_\odot$ (68$\%$ confidence limit). Our results, consistent with previous studies of this lens, confirm that the intervening mass along the line of sight to HE$\,$0435$-$1223 does not affect significantly the cosmological results inferred from the time delay measurements of that specific object., Comment: 14 pages, 8 figures, 2 tables

We report on discovery results from a quasar lens search in the ATLAS public footprint, extending quasar lens searches to a regime without $u-$band or fiber-spectroscopic information, using a combination of data mining techniques on multi-band catalog magnitudes and image-cutout modelling. Spectroscopic follow-up campaigns, conducted at the 2.6m Nordic Optical Telescope (La Palma) and 3.6m New Technology Telescope (La Silla) in 2016, yielded seven pairs of quasars exhibiting the same lines at the same redshift and monotonic flux-ratios with wavelength (hereafter NIQs, Nearly Identical Quasar pairs). The quasar redshifts range between $\approx1.2$ and $\approx 2.7;$ contaminants are typically pairs of bright blue stars, quasar-star alignments along the line of sight, and narrow-line galaxies at $0.3

We report the serendipitous discovery of the first gravitationally lensed quasar candidate from Pan-STARRS. The grizy images reveal four point-like images with magnitudes between 14.9 mag and 18.1 mag. The colors of the point sources are similar, and they are more consistent with quasars than with stars or galaxies. The lensing galaxy is detected in the izy bands, with an inferred photometric redshift of ~0.6, lower than that of the point sources. We successfully model the system with a singular isothermal ellipsoid with shear, using the relative positions of the five objects as constraints. While the brightness ranking of the point sources is consistent with that of the model, we find discrepancies between the model-predicted and observed fluxes, likely due to microlensing by stars and millilensing due to the dark matter substructure. In order to fully confirm the gravitational lens nature of this system and add it to the small but growing number of the powerful probes of cosmology and astrophysics represented by quadruply lensed quasars, we require further spectroscopy and high-resolution imaging., Comment: 29 pages, 7 figures, accepted in ApJ

We report the discovery and spectroscopic confirmation of the quad-like lensed quasar system DES J0408-5354 found in the Dark Energy Survey (DES) Year 1 (Y1) data. This system was discovered during a search for DES Y1 strong lensing systems using a method that identified candidates as red galaxies with multiple blue neighbors. DES J0408-5354 consists of a central red galaxy surrounded by three bright (i < 20) blue objects and a fourth red object. Subsequent spectroscopic observations using the Gemini South telescope confirmed that the three blue objects are indeed the lensed images of a quasar with redshift z = 2.375, and that the central red object is an early-type lensing galaxy with redshift z = 0.597. DES J0408-5354 is the first quad lensed quasar system to be found in DES and begins to demonstrate the potential of DES to discover and dramatically increase the sample size of these very rare objects., Comment: 9 pages, 4 figures, submitted to ApJ Letters

We present a new measurement of the Hubble Constant H0 and other cosmological parameters based on the joint analysis of three multiply-imaged quasar systems with measured gravitational time delays. First, we measure the time delay of HE0435-1223 from 13-year light curves obtained as part of the COSMOGRAIL project. Companion papers detail the modeling of the main deflectors and line of sight effects, and how these data are combined to determine the time-delay distance of HE 0435-1223. Crucially, the measurements are carried out blindly with respect to cosmological parameters in order to avoid confirmation bias. We then combine the time-delay distance of HE0435-1223 with previous measurements from systems B1608+656 and RXJ1131-1231 to create a Time Delay Strong Lensing probe (TDSL). In flat $\Lambda$CDM with free matter and energy density, we find $H_0$ = 71.9 +2.4 -3.0 km/s/Mpc and $\Omega_{\Lambda}$ = 0.62 +0.24 -0.35 . This measurement is completely independent of, and in agreement with, the local distance ladder measurements of H0. We explore more general cosmological models combining TDSL with other probes, illustrating its power to break degeneracies inherent to other methods. The TDSL and Planck joint constraints are $H_0$ = 69.2 +1.4 -2.2 km/s/Mpc, $\Omega_{\Lambda}$ = 0.70 +0.01 -0.01 and $\Omega_k$ = 0.003 +0.004 -0.006 in open $\Lambda$CDM and $H_0$ = 79.0 +4.4 -4.2 km/s/Mpc, $\Omega_{de}$ = 0.77 +0.02 -0.03 and $w$ = -1.38 +0.14 -0.16 in flat $w$CDM. Combined with Planck and Baryon Acoustic Oscillation data, when relaxing the constraints on the numbers of relativistic species we find $N_{eff}$ = 3.34 +0.21 -0.21 and when relaxing the total mass of neutrinos we find 0.182 eV. In an open $w$CDM in combination with Planck and CMB lensing we find $H_0$ = 77.9 +5.0 -4.2 km/s/Mpc, $\Omega_{de}$ = 0.77 +0.03 -0.03, $\Omega_k$ = -0.003 +0.004 -0.004 and $w$ = -1.37 +0.18 -0.23., Comment: 19 pages, 7 figures, 4 tables. Accepted for publication in MNRAS. Light curves and simulated data can be downloaded at http://www.h0licow.org

Galaxies located in the environment or on the line of sight towards gravitational lenses can significantly affect lensing observables, and can lead to systematic errors on the measurement of $H_0$ from the time-delay technique. We present the results of a systematic spectroscopic identification of the galaxies in the field of view of the lensed quasar HE0435-1223, using the W. M. Keck, Gemini and ESO-Very Large telescopes. Our new catalog triples the number of known galaxy redshifts in the vicinity of the lens, expanding to 102 the number of measured redshifts for galaxies separated by less than 3 arcmin from the lens. We complement our catalog with literature data to gather redshifts up to 15 arcmin from the lens, and search for galaxy groups or clusters projected towards HE0435-1223. We confirm that the lens is a member of a small group that includes at least 12 galaxies, and find 8 other group candidates near the line of sight of the lens. The flexion shift, namely the shift of lensed images produced by high order perturbation of the lens potential, is calculated for each galaxy/group and used to identify which objects produce the largest perturbation of the lens potential. This analysis demonstrates that i) at most three of the five brightest galaxies projected within 12 arcsec of the lens need to be explicitly used in the lens models, and ii) the groups can be treated in the lens model as an external tidal field (shear) contribution., Comment: Version revised to address referee's comments, submitted to MNRAS, 21 pages (incl. Appendix). Data associated to the paper available from the H0LICOW website www.h0licow.org

Strong gravitational lens systems with time delays between the multiple images allow measurements of time-delay distances, which are primarily sensitive to the Hubble constant that is key to probing dark energy, neutrino physics, and the spatial curvature of the Universe, as well as discovering new physics. We present H0LiCOW ($H_0$ Lenses in COSMOGRAIL's Wellspring), a program that aims to measure $H_0$ with $<3.5\%$ uncertainty from five lens systems (B1608+656, RXJ1131-1231, HE0435-1223, WFI2033-4723 and HE1104-1805). We have been acquiring (1) time delays through COSMOGRAIL and Very Large Array monitoring, (2) high-resolution Hubble Space Telescope imaging for the lens mass modeling, (3) wide-field imaging and spectroscopy to characterize the lens environment, and (4) moderate-resolution spectroscopy to obtain the stellar velocity dispersion of the lenses for mass modeling. In cosmological models with one-parameter extension to flat $\Lambda$CDM, we expect to measure $H_0$ to $<3.5\%$ in most models, spatial curvature $\Omega_{\rm k}$ to 0.004, $w$ to 0.14, and the effective number of neutrino species to 0.2 (1$\sigma$ uncertainties) when combined with current CMB experiments. These are, respectively, a factor of $\sim15$, $\sim2$, and $\sim1.5$ tighter than CMB alone. Our data set will further enable us to study the stellar initial mass function of the lens galaxies, and the co-evolution of supermassive black holes and their host galaxies. This program will provide a foundation for extracting cosmological distances from the hundreds of time-delay lenses that are expected to be discovered in current and future surveys., Comment: 16 pages, 3 figures, submitted to MNRAS and revised based on referee's comments

The low-temperature microscopic magnetic properties of the quasi-2D heavyfermion compound, CePt2In7 are investigated by using a positive muon-spin rotation and relaxation (?muSR) technique. Clear evidence for the formation of a commensurate antiferromagnetic order below TN=5.40 K is presented. The magnetic order parameter is shown to fit well to a modified BSC gap-energy function in a strong-coupling scenario., Comment: Accepted in Journal of Physics: Conference Series (2014)