Search

Synthetic surrogate head models are used in biomechanical studies to investigate skull, brain, and cervical spine injury. To ensure appropriate biofidelity of these head models, the stiffness is often tuned so that the surrogate’s response approximates the cadaveric response corridor. Impact parameters such as energy, and loading direction and region, can influence injury prediction measures, such as impact force and head acceleration. An improved understanding of how impact parameters affect the head’s structural response is required for designing better surrogate head models. This study comprises a synthesis and review of all existingex vivohead stiffness data, and the primary factors that influence the force–deformation response are discussed. Eighteen studies from 1972 to 2019 were identified. Head stiffness statistically varied with age (pediatric vs. adult), loading region, and rate. The contact area of the impactor likely affects stiffness, whereas the impactor mass likely does not. The head’s response to frontal impacts was widely reported, but few studies have evaluated the response to other impact locations and directions. The findings from this review indicate that further work is required to assess the effect of head constraints, loading region, and impactor geometry, across a range of relevant scenarios.

Refereed/Peer-reviewed BACKGROUND: A nanostructured titanium surface that promotes antimicrobial activity and osseointegration would provide the opportunity to create medical implants that can prevent orthopaedic infection and improve bone integration. Although nanostructured surfaces can exhibit antimicrobial activity, it is not known whether these surfaces are safe and conducive to osseointegration. QUESTIONS/PURPOSES: Using a sheep animal model, we sought to determine whether the bony integration of medical-grade, titanium, porous-coated implants with a unique nanostructured surface modification (alkaline heat treatment [AHT]) previously shown to kill bacteria was better than that for a clinically accepted control surface of porous-coated titanium covered with hydroxyapatite (PCHA) after 12 weeks in vivo. The null hypothesis was that there would be no difference between implants with respect to the primary outcomes: interfacial shear strength and percent intersection surface (the percentage of implant surface with bone contact, as defined by a micro-CT protocol), and the secondary outcomes: stiffness, peak load, energy to failure, and micro-CT (bone volume/total volume [BV/TV], trabecular thickness [Tb.Th], and trabecular number [Tb.N]) and histomorphometric (bone-implant contact [BIC]) parameters. METHODS: Implants of each material (alkaline heat-treated and hydroxyapatite-coated titanium) were surgically inserted into femoral and tibial metaphyseal cancellous bone (16 per implant type; interference fit) and in tibial cortices at three diaphyseal locations (24 per implant type; line-to-line fit) in eight skeletally mature sheep. At 12 weeks postoperatively, bones were excised to assess osseointegration of AHT and PCHA implants via biomechanical push-through tests, micro-CT, and histomorphometry. Bone composition and remodeling patterns in adult sheep are similar to that of humans, and this model enables comparison of implants with ex vivo outcomes that are not permissible with humans. Comparisons of primary and secondary outcomes were undertaken with linear mixed-effects models that were developed for the cortical and cancellous groups separately and that included a random effect of animals, covariates to adjust for preoperative bodyweight, and implant location (left/right limb, femoral/tibial cancellous, cortical diaphyseal region, and medial/lateral cortex) as appropriate. Significance was set at an alpha of 0.05. RESULTS: The estimated marginal mean interfacial shear strength for cancellous bone, adjusted for covariates, was 1.6 MPa greater for AHT implants (9.3 MPa) than for PCHA implants (7.7 MPa) (95% CI 0.5 to 2.8; p = 0.006). Similarly, the estimated marginal mean interfacial shear strength for cortical bone, adjusted for covariates, was 6.6 MPa greater for AHT implants (25.5 MPa) than for PCHA implants (18.9 MPa) (95% CI 5.0 to 8.1; p < 0.001). No difference in the implant-bone percent intersection surface was detected for cancellous sites (cancellous AHT 55.1% and PCHA 58.7%; adjusted difference of estimated marginal mean -3.6% [95% CI -8.1% to 0.9%]; p = 0.11). In cortical bone, the estimated marginal mean percent intersection surface at the medial site, adjusted for covariates, was 11.8% higher for AHT implants (58.1%) than for PCHA (46.2% [95% CI 7.1% to 16.6%]; p < 0.001) and was not different at the lateral site (AHT 75.8% and PCHA 74.9%; adjusted difference of estimated marginal mean 0.9% [95% CI -3.8% to 5.7%]; p = 0.70). CONCLUSION: These data suggest there is stronger integration of bone on the AHT surface than on the PCHA surface at 12 weeks postimplantation in this sheep model. CLINICAL RELEVANCE: Given that the AHT implants formed a more robust interface with cortical and cancellous bone than the PCHA implants, a clinical noninferiority study using hip stems with identical geometries can now be performed to compare the same surfaces used in this study. The results of this preclinical study provide an ethical baseline to proceed with such a clinical study given the potential of the alkaline heat-treated surface to reduce periprosthetic joint infection and enhance implant osseointegration.

ObjectiveIt is unclear if different factors influence osteoarthritis (OA) progression and the changes characterising OA disease in hip and knee. We investigated the difference between hip OA and knee OA at the subchondral bone tissue and cellular level, relative to the degree of cartilage degeneration.DesignBone samples were collected from 11 patients (aged 70±8 years) undergoing knee arthroplasty and 8 patients (aged 64±12 years) undergoing hip arthroplasty surgery. Bone microstructure, osteocyte-lacunar network and bone matrix vascularity were evaluated using synchrotron micro-CT imaging. Samples were additionally examined histologically to determine osteocyte density, viability, and connectivity.ResultsAfter adjustment for donor gender and age, associations between the extent of cartilage degeneration, bone volume fraction [8.7, 95% CI (3.4, 14.1)], trabecular number [1.5, 95% CI (0.8, 2.3)], osteocyte lacunar density [4714.9; 95% CI (2079.1, 7350.6)] and trabecular separation [-0.06, 95% CI (0.01, 0.1)] were found in both knee and hip OA.When compared to knee OA, hip OA was characterised by higher trabecular thickness [0.006, 95% CI (-4, 0.01)], larger but less spheric osteocyte lacunae [47.3; 95% CI (11.2, 83.4), -0.04; 95% CI (-0.6, -0.01), respectively], lower vascular canal density [-22.8; 95% CI (-35.4, -10.3)] lower osteocyte density [-84.9; 95% CI (-102.4, -67.4)], and less senescent but more apoptotic osteocytes [-2.4; 95% CI (-3.6, -1.2), 24.9; 95% CI (17.7, 32.1)], respectively.ConclusionSubchondral bone from hip OA and knee OA exhibits different characteristics at the tissue and cellular levels, suggesting different mechanisms of OA progression between the hip and knee joints.

Pathological outcomes of traumatic brain injury (TBI), including diffuse axonal injury, are influenced by the direction, magnitude, and duration of head acceleration during the injury exposure. Ovine models have been used to study injury mechanics and pathological outcomes of TBI. To accurately describe the kinematics of the head during an injury exposure, and better facilitate comparison with human head kinematics, anatomical coordinate systems (ACS) with an origin at the head or brain center of mass (CoM), and axes that align with the ovine Frankfort plane equivalent, are required. The aim of this study was to determine the mass properties of the sheep head and brain, and define an ACS

During cervical spine trauma, complex intervertebral motions can cause a reduction in facet joint cartilage apposition area (CAA), leading to cervical facet dislocation (CFD). Intervertebral compression and distraction likely alter the magnitude and location of CAA, and may influence the risk of facet fracture. The aim of this study was to investigate facet joint CAA resulting from intervertebral distraction (2.5 mm) or compression (50, 300 N) superimposed on shear and bending motions. Intervertebral and facet joint kinematics were applied to multi rigid-body kinematic models of twelve C6/C7 motion segments (70 ± 13 year, nine male) with specimen-specific cartilage profiles. CAA was qualitatively and quantitatively compared between distraction and compression conditions for each motion; linear mixed-effects models (α = 0.05) were applied. Distraction significantly decreased CAA throughout all motions, compared to the compressed conditions (p

Computational models of experimental data can provide a noninvasive method to estimate spinal facet joint biomechanics. Existing models typically consider each vertebra as one rigid-body and assume uniform facet cartilage thickness. However, facet deflection occurs during motion, and cervical facet cartilage is nonuniform. Multi rigid-body computational models were used to investigate the effect of specimen-specific cartilage profiles on facet contact area estimates. Twelve C6/C7 segments underwent non-destructive intervertebral motions. Kinematics and facet deflections were measured. Three-dimensional models of the vertebra and cartilage thickness estimates were obtained from pre-test CT data. Motion-capture data was applied to two model types (2RB: C6, C7 vertebrae each one rigid body; 3RB: left and right C6 posterior elements, and C7 vertebrae, each one rigid body) and maximum facet mesh penetration was compared. Constant thickness cartilage (CTC) and spatially-varying thickness cartilage (SVTC) profiles were applied to the facet surfaces of the 3RB model. Cartilage apposition area (CAA) was compared. Linear mixed-effects models were used for all quantitative comparisons. The 3RB model significantly reduced penetrating mesh elements by accounting for facet deflections (p = 0.001). The CTC profile resulted in incongruent facet articulation, whereas realistic congruence was observed for the SVTC profile. The SVTC profile demonstrated significantly larger CAA than the CTC model (p

Spinal cord injury (SCI) frequently results in motor, sensory, and autonomic dysfunction for which there is currently no cure. Recent pre-clinical and clinical research has led to promising advances in treatment; however, therapeutics indicating promise in rodents have not translated successfully in human trials, likely due, in part, to gross anatomical and physiological differences between the species. Therefore, large animal models of SCI may facilitate the study of secondary injury processes that are influenced by scale, and may assist the translation of potential therapeutic interventions. The aim of this study was to characterize two severities of thoracic contusion SCI in female domestic pigs, measuring motor function and spinal cord lesion characteristics, over 2 weeks post-SCI. A custom-instrumented weight-drop injury device was used to release a 50 g impactor from 10 cm (

ObjectiveOver-activity of transforming growth factor β1 (TGFβ1) in subchondral bone has a direct causal role in rodent models of knee osteoarthritis (OA), which can be blocked by TGFβ1 neutralisation. In this study, we investigated whether the spatially distributed level of active TGFβ1 in human subchondral bone associates with the characteristic structural, cellular and molecular parameters of human knee OA.DesignSubchondral bone samples (35 OA arthroplasty patients, aged 69±9 years) were obtained from regions below either macroscopically present or denuded cartilage. Bone samples were processed to determine the concentration of active TGFβ1 (ELISA) and gene-specific mRNA expression (RT-PCR). Synchrotron micro-CT imaging was utilised to assess the bone microstructure, bone mineralization, the osteocyte lacunar network and bone matrix vascularity. Finally, samples were histologically examined for cartilage OARSI grading, quantification of tartrate resistant acid phosphatase positive cells and bone marrow micro-vasculature.ResultsSubchondral bone below severely degenerated/depleted cartilage, characterised by impaired bone matrix quality due to sclerotic microarchitecture, disorganised collagen, high heterogeneity of the mineral distribution, contained increased concentrations of active TGFβ1, compared to adjacent areas with more intact cartilage. In addition, increased levels of active TGFβ1 related directly to increased bone volume while increased OARSI grade associated directly with morphometric characteristics (size, shape and orientation) of osteocyte lacunae.ConclusionThese results indicate that increased active TGFβ1 associates spatially with impaired bone quality and the disease severity of human OA. This study therefore suggests that TGFβ1 could be a therapeutic target to prevent or reduce human disease progression.

© 2018 Elsevier Ltd. This manuscript version is made available under the CC-BY-NC-ND 4.0 license: http://creativecommons.org/licenses/by-nc-nd/4.0/ This author accepted manuscript is made available following 12 month embargo from date of publication (December 2018) in accordance with the publisher’s archiving policy, The subaxial cervical facets are important load-bearing structures, yet little is known about their mechanical response during physiological or traumatic intervertebral motion. Facet loading likely increases when intervertebral motions are superimposed with axial compression forces, increasing the risk of facet fracture. The aim of this study was to measure the mechanical response of the facets when intervertebral axial compression or distraction is superimposed on constrained, non-destructive shear, bending and rotation motions. Twelve C6/C7 motion segments (70 ± 13 yr, nine male) were subjected to constrained quasi-static anterior shear (1 mm), axial rotation (4°), flexion (10°), and lateral bending (5°) motions. Each motion was superimposed with three axial conditions: (1) 50 N compression; (2) 300 N compression (simulating neck muscle contraction); and, (3) 2.5 mm distraction. Angular deflections, and principal and shear surface strains, of the bilateral C6 inferior facets were calculated from motion-capture data and rosette strain gauges, respectively. Linear mixed-effects models (α = 0.05) assessed the effect of axial condition. Minimum principal and maximum shear strains were largest in the compressed condition for all motions except for maximum principal strains during axial rotation. For right axial rotation, maximum principal strains were larger for the contralateral facets, and minimum principal strains were larger for the left facets, regardless of axial condition. Sagittal deflections were largest in the compressed conditions during anterior shear and lateral bending motions, when adjusted for facet side.

Bilateral cervical facet dislocation (BFD) with facet fracture (Fx) often causes tetraplegia but is rarely recreated experimentally, possibly due to a lack of muscle replication. Intervertebral axial compression (due to muscle activation) or distraction (due to inertial loading), when combined with excessive anterior translation, may influence interfacet contact or separation and the subsequent production of BFD with or without Fx. This paper presents a methodology to produce C6/C7 BFD+Fx using anterior shear motion superimposed with 300 N compression or 2.5 mm distraction. The effect of these superimposed axial conditions on six-axis loads, and C6 inferior facet deflections and surface strains, was assessed. Twelve motion segments (70 ± 13 yr) achieved 2.19 mm of supraphysiologic anterior shear without embedding failure (supraphysiologic shear analysis point; SSP), and BFD+Fx was produced in all five specimens that reached 20 mm of shear. Linear mixed-effects models (α = 0.05) assessed the effect of axial condition. At the SSP, the compressed specimens experienced higher axial forces, facet shear strains, and sagittal facet deflections, compared to the distracted group. Facet fractures had similar radiographic appearance to those that are observed clinically, suggesting that intervertebral anterior shear motion contributes to BFD+Fx.

Introduction Adhesions are often considered to be an inevitable consequence of abdominal and pelvic surgery, jeopardizing the medium and long-term success of these procedures. Numerous strategies have been tested to reduce adhesion formation, however, to date, no surgical or medical therapeutic approaches have been successful in its prevention. This study demonstrates the safety and efficacy of Chitogel with Deferiprone and/or antibacterial Gallium Protoporphyrin in different concentrations in preventing adhesion formation after abdominal surgery. Materials and methods 112 adult (8–10 week old) male Wistar albino rats were subjected to midline laparotomy and caecal abrasion, with 48 rats having an additional enterotomy and suturing. Kaolin (0.005g/ml) was applied to further accelerate adhesion formation. The abrasion model rats were randomized to receive saline, Chitogel, or Chitogel plus Deferiprone (5, 10 or 20 mM), together with Gallium Protoporphyrin (250μg/mL). The abrasion with enterotomy rats were randomised to receive saline, Chitogel or Chitogel with Deferiprone (1 or 5 mM). At day 21, rats were euthanised, and adhesions graded macroscopically and microscopically; the tensile strength of the repaired caecum was determined by an investigator blinded to the treatment groups. Results Chitogel with Deferiprone 5 mM significantly reduced adhesion formation (p Conclusions Chitogel with Deferiprone 1 mM constitutes an effective preventative anti-adhesion barrier after abdominal surgery in a rat model. Moreover, this therapeutic combination of agents is safe and does not weaken the healing of the sutured enterotomy site.

© 2018 Elsevier Ltd. This manuscript version is made available under the CC-BY-NC-ND 4.0 license: http://creativecommons.org/licenses/by-nc-nd/4.0/ This author accepted manuscript is made available following 12 month embargo from date of publication (March 2018) in accordance with the publisher’s archiving policy, Traumatic cervical facet dislocation (CFD) is often associated with devastating spinal cord injury. Facet fractures commonly occur during CFD, yet quantitative measures of facet deflection, strain, stiffness and failure load have not been reported. The aim of this study was to determine the mechanical response of the subaxial cervical facets when loaded in directions thought to be associated with traumatic bilateral CFD – anterior shear and flexion. Thirty-one functional spinal units (6 × C2/3, C3/4, C4/5, and C6/7, 7 × C5/6) were dissected from fourteen human cadaver cervical spines (mean donor age 69 years, range 48–92; eight male). Loading was applied to the inferior facets of the inferior vertebra to simulate the in vivo inter-facet loading experienced during supraphysiologic anterior shear and flexion motion. Specimens were subjected to three cycles of sub-failure loading (10–100 N, 1 mm/s) in each direction, before being failed in a randomly assigned direction (10 mm/s). Facet deflection, surface strains, stiffness, and failure load were measured. Linear mixed-effects models (α = 0.05; random effect of cadaver) accounted for variations in specimen geometry and bone density. Specimen-specific parameters were significantly associated with most outcome measures. Facet stiffness and failure load were significantly greater in the simulated flexion loading direction, and deflection and surface strains were higher in anterior shear at the non-destructive analysis point (47 N applied load). The sub-failure strains and stiffness responses differed between the upper and lower subaxial cervical regions. Failure occurred through the facet tip during anterior shear loading, while failure through the pedicles was most common in flexion.

© 2017 Elsevier Inc. This manuscript version is made available under the CC-BY-NC-ND 4.0 license: http://creativecommons.org/licenses/by-nc-nd/4.0/ This author accepted manuscript is made available following 12 month embargo from date of publication (July 2017) in accordance with the publisher’s archiving policy, Background Context Distractive flexion injuries (DFIs) of the subaxial cervical spine are major contributors to spinal cord injury (SCI). Prompt assessment and early intervention of DFIs associated with SCI are crucial to optimize patient outcome; however, neurologic examination of patients with subaxial cervical injury is often difficult, as patients commonly present with reduced levels of consciousness. Therefore, it is important to establish potential associations between injury epidemiology and radiographic features, and neurologic involvement. Purpose The aims of this study were to describe the epidemiology and radiographic features of DFIs presenting to a major Australian tertiary hospital and to identify those factors predictive of SCI. The agreement and repeatability of radiographic measures of DFI severity were also investigated. Study Design/Setting This is a combined retrospective case-control and reliability-agreement study. Patient Sample Two hundred twenty-six patients (median age 40 years [interquartile range = 34]; 72.1% male) who presented with a DFI of the subaxial cervical spine between 2003 and 2013 were reviewed. Outcome Measures The epidemiology and radiographic features of DFI, and risk factors for SCI were identified. Inter- and intraobserver agreement of radiographic measurements was evaluated. Methods Medical records, radiographs, and computed tomography and magnetic resonance imaging scans were examined, and the presence of SCI was evaluated. Radiographic images were analyzed by two consultant spinal surgeons, and the degree of vertebral translation, facet apposition, spinal canal occlusion, and spinal cord compression were documented. Multivariable logistic regression models identified epidemiology and radiographic features predictive of SCI. Intraclass correlation coefficients (ICCs) examined inter- and intraobserver agreement of radiographic measurements. Results The majority of patients (56.2%) sustained a unilateral (51.2%) or a bilateral facet (48.8%) dislocation. The C6–C7 vertebral level was most commonly involved (38.5%). Younger adults were over-represented among motor-vehicle accidents, whereas falls contributed to a majority of DFIs sustained by older adults. Greater vertebral translation, together with lower facet apposition, distinguished facet dislocation from subluxation. Dislocation, bilateral facet injury, reduced Glasgow Coma Scale, spinal canal occlusion, and spinal cord compression were predictive of neurologic deficit. Radiographic measurements demonstrated at least a “moderate” agreement (ICC>0.4), with most demonstrating an “almost perfect” reproducibility. Conclusions This large-scale cohort investigation of DFIs in the cervical spine describes radiographic features that distinguish facet dislocation from subluxation, and associates highly reproducible anatomical and clinical indices to the occurrence of concomitant SCI.