Search

A thermal-mechanical fatigue criterion is proposed to assess the lifetime of aluminium alloys produced by a lost foam casting process. It is based on the observed size distribution of pores sizes which are considered as critical zones for cracks initiation and gives reliable results when both pores sizes are identified from X-ray tomography and mean stresses are taken into account. Lifetime probabilities are finally successfully compared with experimental results.

ABSTRACT The purpose of this paper is to define a thermo-mechanical fatigue criterion in order to predict the failure of aluminum alloys components issued with the lost foam casting process and used in particular in the automotive industry. The microstructure of the studied materials (A356-A319 aluminum alloys) is clearly affected by the lost foam casting process which can directly affect the mechanical properties, the damage mechanisms and the fatigue failure of specimens and components. The major problem in defining a predictive fatigue criterion in this case is the fact that it should be applicable for the component which is submitted to complex multiaxial thermo-mechanical loadings. Since many years, energy-based criteria have been used to predict fatigue failure of this class of materials. Then, different energy-based criteria are tested in order to take into account different types of triaxiality and mean stress effects corrections. The fatigue lifetime results predicted by both of them show a good agreement with experimental results. [ABSTRACT FROM AUTHOR]

The mechanical study of Running Specific Prostheses (RSPs) is often limited to the blade. The setup developed and presented herein is a simple experiment, based on a mechanical testing machine and a camera, that assesses two indicators relevant to coaches and athletes in the field of athletics: secant stiffness and energy dissipation. The influence of four parameters on global prosthesis behaviour is evaluated: the load line offset, the prosthesis-ground angle, the sole type and the flooring type. The load line offset and the flooring type have little to no influence on their behaviour. The prosthesis-ground angle impacts the stiffness: an increase in the angle brings a significant decrease in stiffness, which strongly impacts the performance. The type of sole modifies the kinematics of the blade tip's interaction with the ground. However, this effect is less likely to enhance the sports practice since athletics imposes the use of spikes. The camera images allow assessing the local behaviour of the sole, thus enabling to follow its strain through the compression process., (© 2023. The Author(s).)

Introduction : Durable reconstruction of critical size bone defects is still a surgical challenge despite the availability of numerous autologous and substitute bone options. In this paper, we have investigated the possibility of creating a living bone allograft, using the perfusion/decellularization/recellularization (PDR) technique, which was applied to an original model of vascularized porcine bone graft. Materials and Methods : 11 porcine bone forelimbs, including radius and ulna, were harvested along with their vasculature including the interosseous artery and then decellularized using a sequential detergent perfusion protocol. Cellular clearance, vasculature, extracellular matrix (ECM), and preservation of biomechanical properties were evaluated. The cytocompatibility and in vitro osteoinductive potential of acellular extracellular matrix were studied by static seeding of NIH-3T3 cells and porcine adipose mesenchymal stem cells (pAMSC), respectively. Results : The vascularized bone grafts were successfully decellularized, with an excellent preservation of the 3D morphology and ECM microarchitecture. Measurements of DNA and ECM components revealed complete cellular clearance and preservation of ECM's major proteins. Bone mineral density (BMD) acquisitions revealed a slight, yet non-significant, decrease after decellularization, while biomechanical testing was unmodified. Cone beam computed tomography (CBCT) acquisitions after vascular injection of barium sulphate confirmed the preservation of the vascular network throughout the whole graft. The non-toxicity of the scaffold was proven by the very low amount of residual sodium dodecyl sulfate (SDS) in the ECM and confirmed by the high live/dead ratio of fibroblasts seeded on periosteum and bone ECM-grafts after 3, 7, and 16 days of culture. Moreover, cell proliferation tests showed a significant multiplication of seeded cell populations at the same endpoints. Lastly, the differentiation study using pAMSC confirmed the ECM graft's potential to promote osteogenic differentiation. An osteoid-like deposition occurred when pAMSC were cultured on bone ECM in both proliferative and osteogenic differentiation media. Conclusion : Fully decellularized bone grafts can be obtained by perfusion decellularization, thereby preserving ECM architecture and their vascular network, while promoting cell growth and differentiation. These vascularized decellularized bone shaft allografts thus present a true potential for future in vivo reimplantation. Therefore, they may offer new perspectives for repairing large bone defects and for bone tissue engineering., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Rougier, Maistriaux, Fievé, Xhema, Evrard, Manon, Olszewski, Szmytka, Thurieau, Boisson, Kadlub, Gianello, Behets and Lengelé.)