Search

This article presents the use of advanced tools applied to the design of devices that can solve specific acoustic problems, improving the already existing devices based on classic technologies. Specifically, we have used two different configurations of a material called Sonic Crystals, which is formed by arrays of acoustic scatterers, to obtain acoustic screens with high diffusion properties by means of an optimization process. This design procedure has been carried out using a multiobjective evolutionary algorithm along to an acoustic simulation model developed with the numerical method called Finite Difference Time Domain (FDTD). The results obtained are discussed in terms of both the acoustic performance and the robustness of the devices achieved., Comment: 19 pages, 5 figures

We report Bessel-like beam formation of acoustic waves by means of an axisymmetric grating of rigid tori. The results show that the generated beam pattern is similar to that of Bessel beams, characterized by elongated non-diffracting focal spots. A multiple foci structure is observed, due to the finite size of the lens. The dependence of the focal distance on the frequency is also discussed, on the basis of an extended grating theory. Experimental validation of acoustic Bessel-like beam formation is also reported for sound waves. The results can be generalized to wave beams of different nature, as optical or matter waves.

The symmetry matching between the source and the lens results of fundamental interest for lensing applications. In this work we have modeled an axisymmetric gradient index (GRIN) lens made of rigid toroidal scatterers embedded in air considering this symmetry matching with radially symmetric sources. The sound amplification obtained in the focal spot of the reported lens (8.24 dB experimentally) shows the efficiency of the axisymmetric lenses with respect to the previous Cartesian acoustic GRIN lenses. The axisymmetric design opens new possibilities in lensing applications in different branches of science and technology.

The effect of the presence of a finite impedance surface on the wave propagation properties of a two-dimensional periodic array of rigid cylinders with their axes perpendicular to the surface is both numerically and experimentally analyzed in this work. In this realistic situation both the incident and the scattered waves interact with these two elements, the surface and the array. The interaction between the excess attenuation effect, due to the destructive interference produced by the superposition of the incident wave and the reflected one by the surface, and the bandgap, due to the periodicity of the array, is fundamental for the design of devices to control the transmission of waves based on periodic arrays. The most obvious application is perhaps the design of Sonic Crystals Noise Barriers. Two different finite impedance surfaces have been analyzed in the work in order to observe the dependence of the wave propagation properties on the impedance of the surface.

Complex Band Structures and Multiple Scattering Theory have been used in this paper to analyze the overlapping of the evanescent waves localized in point defects in Sonic Crystals. The Extended Plane Wave Expansion (EPWE) with supercell approximation gives the imaginary part of the Bloch vectors that produces the decay of the localized modes inside the periodic system. Double-cavities can present a coupling between the evanescent modes localized in the defect, showing a symmetric or antisymmetric modes. When point defects are close, the complex band structures reveal a splitting of the frequencies of the localized modes. Both the real part and the imaginary values of wave vector of the localized modes in the cavities present different values for each localized mode, which gives different properties for each mode. Novel measurements, in very good agreement with analytical data, show the experimental evidences of the symmetric and antisymmetric localized modes for a double-point defect in Sonic Crystals (SC). The investigation on the localization phenomena and the coupling between defects in periodic systems has a fundamental importance both in pure and in applied physics.

This work theoretically and experimentally reports the evanescent connections between propagating bands in periodic acoustic materials. The complex band structures obtained by solving for the $k(\omega)$ problem reveal a complete interpretation of the propagation properties of these systems. The prediction of evanescent modes, non predicted by classical $\omega(\vec{k})$ methods, is of interest for the understanding of these propagation properties. Complex band structures provide an interpretation of the evanescent coupling and the level repulsion states showing the possibility to control of evanescent waves in periodic materials.

An acoustic metamaterial made of a two-dimensional (2D) periodic array of multi-resonant acoustic scatterers is analysed in this paper. The building blocks consist of a combination of elastic beams of Low-Density Polyethylene Foam (LDPF) with cavities of known volume. Sound inside the structure can excite elastic resonances of the material as well as acoustic resonances in the cavities producing several attenuation peaks in the low-frequency range. Due to this behaviour at the subwavelength regime we can define this periodic array as a Locally Multi-Resonant Acoustic Metamaterial (LMRAM) presenting strong dispersive characteristics of the effective properties with subwavelength multi-resonant structural units. The results shown in this paper could be use to design effective Sonic Crystal Acoustic Barriers with wide tunable attenuation bands in the low-frequency range.

The physical properties of a periodic distribution of absorbent resonators is used in this work to design a tunable wideband bandstop acoustic filter. Analytical and numerical simulations as well as experimental validations show that the control of the resonances and the absorption of the scatterers along with their periodic arrangement in air introduces high technological possibilities to control noise. Sound manipulation is perhaps the most obvious application of the structures presented in this work. We apply this methodology to develop a device as an alternative to the conventional acoustic barriers with several properties from the acoustical point of view but also with additional aesthetic and constructive characteristics.

The use of Sonic Crystals as environmental noise barriers has certain advantages from the acoustical and the constructive point of view with regard to conventional ones. One aspect do not studied yet is the acoustic interaction between the Sonic Crystals and the ground due to, up to now, this latter is not included in the analytical models used to characterize these Sonic Crystals. We present here an analytical model, based on multiple scattering theory, to study this interaction considering the ground as a finite impedance surface. Using this model we have obtained interesting conclusions that allow to design more effectively noise screens based on Sonic Crystals. The obtained results have been compared with experimental and numerical, finding a good agreement between them.

Research into properties of heterogeneous artificial materials, consisting of arrangements of rigid scatterers embedded in a medium with different elastic properties, has been intense throughout last two decades. The capability to prevent the transmission of waves in predetermined bands of frequencies -called bandgaps- becomes one of the most interesting properties of these systems, and leads to the possibility of designing devices to control wave propagation. The underlying physical mechanism is destructive Bragg interference. Here we show a technique that enables the creation of a wide bandgap in these materials, based on fractal geometries. We have focused our work in the acoustic case where these materials are called Phononic/Sonic Crystals (SC) but, the technique could be applied any types of crystals and wave types in ranges of frequencies where the physics of the process is linear.

Evanescent modes in complete sonic crystals (SC) and SC with point defects are reported both theoretically and experimentally in this paper. Plane wave expansion (PWE) and, in general, $\omega(k)$ methods have been used to calculate band structures showing gaps that have been interpreted as ranges of frequencies where no real $k$ exists. In this work, we extend PWE to solve the complex $k(\omega)$ problem applied to SC, introducing the supercell approximation for studying one vacancy. Explicit matrix formulation of the equations is given. This $k(\omega)$ method enables the calculation of complex band structures, as well as enabling an analysis of the propagating modes related with real values of the function $k(\omega)$, and the evanescent modes related with imaginary values of $k(\omega)$. This paper shows theoretical results and experimental evidences of the evanescent behavior of modes inside the SC band gap. Experimental data and numerical results using the finite elements method are in very good agreement with the predictions obtained using the $k(\omega)$ method., Comment: 15 pages, 3 figures

We show both experimentally and theoretically the evanescent behaviour of modes in the Band Gap (BG) of finite Phononic Crystal (PC). Based on experimental and numerical data we obtain the imaginary part of the wave vector in good agreement with the complex band structures obtained by the Extended Plane Wave Expansion (EPWE). The calculated and measured acoustic field of a localized mode out of the point defect inside the PC presents also evanescent behaviour. The correct understanding of evanescent modes is fundamental for designing narrow filters and wave guides based on Phononic Crystals with defects., Comment: 8 pages, 3 figures