Search

Abstract Resin cement exhibits numerous therapeutic advantages over conventional luting materials. However, the effectiveness of the antibacterial properties of resin cement remains unclear. Nanotechnology provides a viable option, whereby the integration of nanoparticles (NPs) can potentially augment the antibacterial effectiveness of resin cement. The objective of this study was to conduct a comprehensive literature review to assess resin cement’s antibacterial effectiveness by incorporating nanoparticles. An extensive search of PubMed and Scopus databases up to September 12, 2023, was conducted to identify relevant scholarly articles that examined and evaluated resin cement’s antibacterial effectiveness with and without the incorporation of nanoparticles (NPs). This systematic review adhered to the PRISMA guidelines for reporting the results. The search retrieved seven eligible studies. Studies indicated that resin cement with NPs significantly reduced the colony forming unit (CFU) counts compared to resin cement without NPs. Furthermore, resin cement, in addition to NPs, significantly reduced the bacterial metabolic activity compared to the control group. The use of nanoparticles (NPs) in resin cement has been shown to enhance its antibacterial properties, possibly mitigating the occurrence of secondary caries. Future clinical trials are required to validate the beneficial effects of NPs in conjunction with resin cement in the prevention of secondary caries.

Abstract This study aimed to assess the knowledge regarding impacts, causes and management of black triangles (BT) among participants from different educational backgrounds including dental students, dentists and laypeople. This descriptive cross-sectional observational research included 435 participants who comprised 4 groups: pre-clinical (3rd year) dental students, clinical (4th and 5th year) dental students, dentists, and laypeople. A constructed self-reported questionnaire was utilized to assess participants’ demographic data and their knowledge of the impacts, causes and management of BT. The VAS scale was used to assess participants’ ratings for the impacts of BT on esthetics, with 0 meaning no impact and 10 meaning very severe negative impacts. The most reported treatments for BT were “cannot be treated” 99.3% and “non-surgical periodontal treatment” 67.1%. Meanwhile, the least reported was “modify the porcelain” 41.8%. The most reported cause of BT was “periodontal disease” 85.1%. However, the least reported were “parafunction” and “deep implants” 33.1% each. Dental professionals had better knowledge of the causes (t = 8.189, P

Abstract The anatomy of furcation favours the bacterial retention and makes periodontal debridement as well as oral hygiene procedures difficult. Teeth that have lost attachment to a level of the furcation are said to have a furcal invasion or furcation involved. Involvement of furcation in a multi-rooted tooth poses a very different type of clinical situation in terms of establishment of diagnosis, determination of prognosis and of course planning the treatment modality.The present study was carried out on 200 selected extracted human first and second permanent molar teeth based on a predefined criteria. Teeth with prosthetic crowns, fused or fractured roots, those not fully developed, grossly carious or heavily restored at the cementoenamel junction (CEJ) were excluded from the study. The morphology of the root trunk was recorded by measuring various dimensions of the root trunk,including furcal angle and root trunk volume was calculated by using a custom made special apparatus. The furcation areas were debrided with different types of curettes in the market in order to see how best the instrument could be maneuvered in the furcation area. The data so obtained was statistically analysed using SPSS version 22. The highest root trunk volume and the longest root trunk length were found to be in the maxillary second molar. 48.60% furcations didn’t allow instrument engagementof furcation area with standard area specific curettes. The proposal of inclusion of root trunk length (mm) is suggested in addition to classification of FI to have assess prognosis and appropriate treatment for of the involved tooth.

IntroductionThis investigation delves into the mechanical behaviour of titanium dental implants, a preferred choice for tooth replacement due to their superior reliability over alternative materials. The phenomenon of implant loosening, frequently induced by masticatory activities, underscores the significance of surface modification or texturing to bolster the interaction between the implant and bone tissue. This research comprehensively examines the effects of four distinct surface texturing techniques and five varied bone quality conditions on the biomechanical performance of these implants.MethodsThe scope of this study is delineated by its focus on implants of diameters 4 mm and 6 mm, with lengths measuring 9 mm and 12 mm respectively. Furthermore, the analysis incorporates the evaluation of four different coatings—hydroxyapatite, HA3TO, HA3Sr, and HA1.5TO1.5Sr—to investigate their efficacy in enhancing the osseointegration process on textured surfaces of dental implants.ResultsThe experimental design entails the assessment of stress distribution within the implant and its coatings, alongside the strain exerted on the surrounding cancellous bone, under the conditions of an average vertical biting force. A comparative analysis between solid implants and those subjected to surface texturing techniques has been conducted. This comparison elucidates the advantageous microstrain profiles presented by certain textured surfaces, which are deemed more conducive to optimal osseointegration.DiscussionNotably, across all examined textures, the application of hydroxyapatite (HA) and a modified HA composition (HA1.5TO1.5Sr) demonstrates significant improvements in mechanical stability, particularly in scenarios involving weak and very weak bone conditions. This study's findings contribute to the ongoing advancement in dental implant technology, emphasizing the critical role of surface texturing and coating strategies in promoting implant longevity and integration within the biomechanical environment of the human oral cavity.

Abstract This analytical cross-sectional study evaluated the perception of black triangles (BT) and examined the relationships between the perception of BT, personality factors, different educational backgrounds and demographic factors. 435 participants were included and divided into four groups: dentists, clinical (4th and 5th year) dental students, pre-clinical (3rd year) dental students, and laypeople. Participants’ perception of the attractiveness of smile profiles of maxillary and mandibular anterior dentition with BT was rated using a ten-point VAS scale with 0 being the least, and 10 being the most attractive smile profile. The personality was assessed using the NEO-FFI personality questionnaire. The smile profile with multiple large BT was rated the least attractive for the maxillary (mean = 3.6) and mandibular (mean = 3.9) tested profiles. The smile profile without BT was rated the most attractive for the maxillary (mean = 9.1) and mandibular (mean = 8.8) tested profiles. The dental professionals perceived the maxillary smile profile with multiple large BT as less attractive than the non-dental participants (t = − 2.715, P = 0.007). Being a male, having dental education, having lower Neuroticism scores, as well as having higher Openness, Agreeableness, Conscientiousness, and Extraversion scores predicted and contributed more towards perceiving various tested smile profiles as more attractive. These findings show that black triangles negatively impacts the perception of smile attractiveness, and that personality traits and having dental education impact the perception of smile attractiveness for smiles with black triangles.

Abstract Background The effectiveness of newly developed elastomeric polymer hybrid siloxane (PVES), which combines the properties of polyethylene (PE) and polyvinyl siloxane (PVS) elastomers, has been a subject of interest in recent studies. This study aimed to assess the physical properties of hybrid PVES materials by analyzing existing data from recent studies on this topic. Methods A systematic literature search was conducted to retrieve peer-reviewed articles published up to February 5, 2023. The population, intervention, comparison, and pertinent outcomes were specified under the PICO framework. The primary data analysis was performed in Microsoft Excel, while statistical analysis used Meta-Essentials. Results Of the 1152 articles assessed, 14 met the inclusion criteria. The meta-analysis of the selected studies indicated that polyether (PE) and polyvinyl siloxane (PVS) were highly correlated (two-tailed p-values of 0.000 and 0.001, respectively) with the improved tensile strength of vinyl polyether siloxane (PVES) with a significantly positive effect size. Similarly, the hydrophilic characteristics of PVES were significantly improved compared to those of PE and PVS. PE was a significant contributor to the hydrophilic characteristics of PVES, with a two-tailed p-value of 0.000. The effect size was highly positive for hydrophilicity but showed high heterogeneity. It was also observed that the dimensional accuracy of PVES was comparable to those of PE and PVS, with no statistically significant differences among the three materials. Conclusions PVES showed promising features, with improved tensile strength and hydrophilic characteristics compared to those of PE and PVS.

Abstract Background This study aimed to determine the relative positioning accuracy of multiple implants utilizing four distinct types of splinting materials. Methods The purpose of this in-vitro study was to compare the precision of four splinting materials in an open tray impression technique in multiple implant situations. Based on the material used for splinting, four groups were made (n = 40)- Group A: Conventional Method, Group B: Prefabricated Pattern Resin Framework, Group C: Prefabricated Metal Framework, Group D: Light Cured Pattern Resin, these groups were compared with the master model. A heat-cured clear acrylic resin and a master model were constructed. A pilot milling machine drill was used to drill four parallel holes in the anterior and premolar regions, which were later labeled as A, B, C, and D positions from right to left. Then, sequential drilling was carried out, and four 3.75‑mm diameter and 13-mm long ADIN implant analogs with internal hex were placed in the acrylic model using a surveyor for proper orientation. The impression posts were then manually screwed to the implant analogs using an open tray, and they were secured to the implants using 10 mm flat head guide pins with a 15 N.cm torque. 10 Open tray polyether impressions were made, and casts were poured. Each splinting method’s distortion values were measured using a coordinate measuring machine capable of recordings in the X-, Y-, and Z-axes. Comparison of mean distances for X1, X2, and X3 was made using the Kruskal-Wallis test, and Pairwise comparison was done using Post Hoc Tukey’s Test. Results The differences between the groups were significant when assessing the distances X1, X2, and X3 (p 0.05). Conclusions All splinting materials produced master casts with measurements in close proximity to the reference model. However, prefabricated pattern resin bars splinting showed the highest accuracy among the studied techniques. The most recent splinting techniques using prefabricated metal framework and light-cure pattern resin showed similar accuracy.

Objective This study aimed to provide valuable insights into the current research status and gaps in digital intraoral scanner literature in dentistry. Methodology Scopus Search Query TITLE-ABS-KEY (intraoral AND scanners AND (dentistry OR digital AND dentistry)). The search query used in Scopus for the bibliometric analysis was “TITLE-ABS-KEY (intraoral AND scanners AND (dentistry OR digital AND dentistry)).” This query indicates that the analysis focused on documents in which the title, abstract, or keywords contained the terms “intraoral,” “scanners,” and either “dentistry” or “digital dentistry.” Results The analysis covers a timespan from 1998 to 2023 and includes 331 documents sourced from 136 publications. The annual growth rate of research in this field is reported to be 15.9%, indicating a steady increase over time. Among the top sources, the “Journal of Esthetic and Restorative Dentistry” and the “Journal of Prosthetic Dentistry” have the highest number of articles, indicating their significance in the field. Some notable authors and their corresponding statistics include WÖSTMANN B, with 15 articles and a fractionalized value of 3.16, and SCHLENZ MA, with 14 articles and a fractionalized value of 2.91. The United States has the highest number of articles, indicating a significant presence in research publications. Germany closely follows this, demonstrating a notable contribution to the scientific community. Conclusions This bibliometric analysis of intraoral scanners used in dentistry provided valuable insights into the current state of research and scholarly publications in this field. This analysis sheds light on the trends, patterns, and advancements in the use of these scanners in dental practice.

Abstract Background and objectives Polyvinyl ether siloxane (PVES) possesses ideal characteristics for making precise and accurate dental impressions. PVES dimensional stability owes to its better polymeric properties derived from its parent materials poly ethers and polyvinyl siloxanes. As recommended use of chemical disinfecting agents is getting more popular, there is a growing concern associated with the effect of disinfectants on PVES dimensional stability. This study was aimed to understand the PVES behavior when subjected to chemical disinfectants. Materials and methodology The data was collected from research studies retrieved from Google Scholar, Scopus, and PubMed using MeSH terms of keywords “vinyl polyether siloxane AND Disinfection” or (Vinyl polyether siloxane OR polyvinyl siloxane ether OR PVES) AND (disinfectant OR disinfection)” without any restriction to publication date. The PRISMA (Preferred Reporting Items for Systemic Review and Meta-Analysis) directions were observed during the data collection, screening of studies, and meta-analysis. The primary data were retrieved, and batch exported from databases using Harzing’s Publish or Perish software; primary analysis was performed in Microsoft Excel, while statistical analysis for effect size, two-tailed p-values, and heterogeneity among studies was performed using Meta Essentials. The effect size was calculated using Hedge’s g values at the 95% confidence level using the random-effects model. Heterogeneity among studies was measured using the Cochrane Q and I2. Results and conclusion Dental impressions made from the PVES elastomeric impression materials showed no significant changes in dimensional stability. Immersion in the chemical disinfectant for 10 min was associated with clinically irrelevant changes in the dimensions of the PVES impressions. Disinfection with sodium hypochlorite was associated with clinically significant changes in dimensions, with a two-tailed p-value of 0.049. Disinfection with 2–2.5% glutaraldehyde solution was not associated with any significant dimensional variability.

Conclusions: Bleaching protocols with 38% hydrogen peroxide were associated with less bleaching sensitivity when followed by ozone application on the teeth.

This laboratory experiment was conducted with the objective of augmenting the mechanical properties of glass ionomer cement (GIC) via altering the composition of GIC luting powder through the introduction of micron-sized silanized glass fibres (GFs). Experimental GICs were prepared through the addition of two concentrations of GFs (0.5% and 1.0% by weight) to the powder of commercially available GIC luting materials. The effect of GF in set GIC was internally evaluated using micro-CT while the mechanical attributes such as nano hardness (nH), elastic modulus (EM), compressive strength (CS), and diametral tensile strength (DTS) were gauged. Additionally, the physical properties such as water solubility and sorption, contact angle (CA), and film thickness were evaluated. Reinforced Ketac Cem Radiopaque (KCR) GIC with 0.5 wt.% GF achieved improved nH, EM, CS, and DTS without affecting the film thickness, CA or internal porosity of the set GIC cement. In contrast, both GF-GIC formulations of Medicem (MC) GIC showed the detrimental effect of the GF incorporation. Reinforcing KCR GIC with 0.5 wt.% silanized GFs could improve the physical and mechanical attributes of luting material. Silanized GF, with optimal concentration within the GIC powder, can be used as a functional additive in KCR GIC with promising results.

Biopolymers are organic polymers that can be treated into intricate designs with porous characteristics that mimic essential biologic components. Due to their superior biosafety, biodegradability, biocompatibility, etc., they have been utilized immensely in biomedical engineering, regeneration, and drug delivery. To obtain the greatest number of results, a literature search was undertaken in scientific search engines utilizing keywords. Chitosan is used in a variety of medical sectors, with the goal of emphasizing its applications and benefits in the clinical dental industry. Chitosan can be dissolved in liquid form and combined with other substances to create a variety of products, including fibers, hydrogels, membranes, microspheres, resins, sponges, pastes, tablets, and micro granules. Chitosan has been studied in a variety of dental applications. Chitosan is used in the prevention of caries and wear, in pulpotomy to accelerate osteogenesis in guided tissue regeneration due to its hemostatic property, and primarily to benefit from its antimicrobial activity by adding it to materials, such as glass ionomer cement, calcium hydroxide, and adhesive systems. With its antibacterial activity and biocompatibility, chitosan is leading the pack as a promising ingredient in the production of dental materials. The current review provides an update on the background, fundamentals, and wide range of uses of chitosan and its gels in dental science.

Artificial intelligence (AI) is a contemporary, information-driven innovative technology. Prosthetic dentistry, also known as prosthodontics, is the restoration and reconstruction of missing teeth utilizing implants for permanent and removable prostheses. It enhances healthy soft and hard tissues, promoting oral health. This study examined the use of artificial intelligence in prosthodontics to diagnose abnormalities and create patient-specific prostheses. Two researchers searched Google Scholar, Scopus, PubMed/MEDLINE, EBSCO host, Science Direct, and Web of Science (MEDLINE, WOS, and KJD). Articles on AI in English were reviewed. We also collected the following broad article aspects: research and control groups, assessment methodology, outcomes, and quality rankings. This methodological study examined AI use in prosthodontics using the latest scientific findings. The findings were statistically evaluated using ANOVA. Titles and abstracts revealed 172 AI-related dentistry studies, which were analyzed in this research. Thirty-eight papers were eliminated. According to the evaluation, AI was found to have significantly increased in prosthodontics. Despite the vast number of studies documenting AI applications, the description of the data illustrated the latest breakthroughs in AI in prosthodontics, highlighting its use in automatically produced diagnostics, predicting analytics, and classification or verification tools.

Retention and support are needed for removable partial denture stability. The stability can be achieved by clasps, occlusal and cingulum rests on healthy abutment teeth. However, implants or crowns can be used to support the removable partial denture instated on unhealthy abutment teeth. This study was conducted to investigate the fracture strength of two types of all-ceramic restorations used as abutments for the removable partial denture framework. The crowns were manufactured with two types of ceramic materials: zirconia and IPS e.max Press ceramics. The metal alloy (cobalt-chrome) was cast to form the removable partial denture framework. A universal testing machine was used to evaluate the fracture strength of both ceramic crown materials. The results presented no fractures in all-ceramic crowns, but deformation of the partial denture frameworks occurred. With the limitation of this study, it can be concluded that zirconia and IPS e.max Press ceramic can be used as abutments to provide adequate support to the removable partial denture.