Search

Cells store energy in lipid droplets, known as oleosomes, which have a neutral lipid core surrounded by a dilatable membrane of phospholipids and proteins. Oleosomes can be loaded with therapeutic lipophilic cargos through their permeable membrane and used as carriers. However, the cargo can also adsorb between the phospholipids and affect the membrane properties. In the present work, we investigated the effect of adsorbed curcumin on the mechanical properties of oleosome membranes using dilatational interfacial rheology (LAOD). The oleosome membrane had a weak-stretchable behavior, while the adsorption of curcumin led to stronger in-plane interactions, which were dependent on curcumin concentration and indicated a glassy-like structure. Our findings showed that adsorbed curcumin molecules can enhance the molecular interactions on the oleosome membrane. This behavior suggests that oleosomes membranes can be modulated by loaded cargo. Understanding cargo and membrane interactions can help to design oleosome-based formulations with tailored mechanical properties for applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Inc.)

Hypothesis: Oilseeds use triacylglycerides as main energy source, and pack them into highly stable droplets (oleosomes) to facilitate the triacylglycerides' long-term storage in the aqueous cytosol. To prevent the coalescence of oleosomes, they are stabilized by a phospholipid monolayer and unique surfactant-shaped proteins, called oleosins. In this study, we use state-of-the-art interfacial techniques to reveal the function of each component at the oleosome interface., Experiments: We created model oil-water interfaces with pure oleosins, phosphatidylcholines, or mixtures of both components (ratios of 3:1, 1:1, 1:3), and applied large oscillatory dilatational deformations (LAOD). The obtained rheological response was analyzed with general stress decomposition (GSD) to get insights into the role of phospholipids and oleosins on the mechanics of the interface., Findings: Oleosins formed viscoelastic solid interfacial films due to network formation via in-plane interactions. Between adsorbed phosphatidylcholines, weak interactions were observed, suggesting the surface stress response upon dilatational deformations was dominated by density changes. In mixtures with 3:1 and 1:1 oleosin-to-phosphatidylcholine ratios, oleosins dominated the interfacial mechanics and formed a network, while phosphatidylcholines contributed to interfacial tension reduction. At higher phosphatidylcholine concentrations (1:3 oleosin-to-phosphatidylcholine), phosphatidylcholine dominated the interface, and no network formation occurred. Our findings improve the understanding of both components' role for oleosomes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

The objective of this study was to investigate granule size and distribution and deformability of granules and their effect on the rheological properties of waxy starch gels. Native (granular) waxy rice gels (10%) were prepared, and their response in oscillatory shear was investigated in the linear and non-linear viscoelastic regime. The results show the gels were mainly composed of aggregated and deformed swollen granules. Significance of granule size and its distribution, deformability of granules, and the molecular characteristics of amylopectin (AP) on storage modulus of those gels was demonstrated. A low degree of deformability of granules, typical for small granules with a broad size distribution and small molecular size of AP with short external chains, resulted in rigid and brittle gels. Highly deformed granules and high AP leachates, however, yielded soft gels. It was found that the transition of elastic to plastic behavior in the non-linear regime (LAOS) was gradual when AP had long external chains, but an abrupt transition was observed with the gel with short exterior chains of AP. Differences in rheological properties of cohesive waxy starch gels appear to be mainly impacted by the varying degrees of granule deformability and rigidity, which is further attributed to a combination of factors, including granule size, particle size distribution, molecular size, the external chain length of amylopectin (AP), and lipid content. The significance of this study is that it will assist the food industry in selecting suitable waxy rice starches to gain desired textural properties of end products.

Hypothesis: Two major protein families are present in rapeseed, namely cruciferins and napins. The structural differences between the two protein families indicate that they might behave differently when their mixture stabilises oil-water interfaces. Therefore, this work focuses on elucidating the role of both proteins in interface and emulsion stabilisation., Experiments: Protein molecular properties were evaluated, using SEC, DSC, CD, and hydrophobicity analysis. The oil-water interface mechanical properties were studied using LAOS and LAOD. General stress decomposition (GSD) was used as a novel method to characterise the nonlinear response. Additionally, to evaluate the emulsifying properties of the rapeseed proteins, emulsions were prepared using pure napins or cruciferin and also their mixtures at 1:3, 1:1 and 3:1 (w:w) ratios., Findings: Cruciferins formed stiff viscoelastic solid-like interfacial layers (G s ' = 0.046 mN/m; E d ' = 30.1 mN/m), while napin formed weaker and more stretchable layers at the oil-water interface (G s ' = 0.010 mN/m; E d ' = 26.4 mN/m). As a result, cruciferin-formed oil droplets with much higher stability against coalescence (coalescence index, CI up to 10%) than napin-stabilised ones (CI up to 146%) during two months of storage. Both proteins have a different role in emulsions produced with napin-cruciferin mixtures, where cruciferin provides high coalescence stability, while napin induces flocculation. Our work showed the role of each rapeseed protein in liquid-liquid multiphase systems., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier Inc. All rights reserved.)

Proteins used as building blocks to template nanostructures with manifold morphologies have been widely reported. Understanding their self-assembly and reassembly mechanism is important for designing functional biomaterials. Herein, we show that enzyme-hydrolyzed α-lactalbumin (α-lac) can self-assemble into either nanotubes in the presence of Ca 2+ ions or nanospheres in the absence of Ca 2+ in solution. Remarkably, such assembled α-lac nanotubes can be elongated by adding preassembled α-lac nanospheres and Ca 2+ solution, which suggests that the self-assembled α-lac nanospheres undergo disassembly and reassembly processes into existing nanotube nuclei. By performing atomic force microscopy (AFM), transmission electron microscopy (TEM), and confocal laser scanning microscopy (CLSM), it indicates that there is an equilibrium among nanotubes, nanospheres, hydrolyzed α-lac, and Ca 2+ in solution. The structural transition between nanotubes and nanospheres is driven from a less stable structure into a more stable structure determined by the conditions. During the transition from nanospheres into nanotubes, the hydrolyzed α-lac in nanospheres transfers into helical ribbon form at both nanotube extremities. Then helical ribbons close into mature nanotubes, extending the length of the initial nuclei. Besides, by dilution or adding ethylene glycol bis(2-aminoethyl ether) tetraacetic acid (EGTA), the decreased Ca 2+ concentration in solution drives the Ca 2+ dissociating from nanotubes into solution, leading to the transitions from nanotubes into nanospheres. The reversible transformation between nanotubes and nanospheres is achieved by adjusting the pH value from 7.5 to 5.0 and back to 7.5. This is because the stability of nanotubes decreases from pH 7.5 to 5 but increases from 5 to 7.5. Significantly, this approach can be used for the fabrication of various responsive nanomaterials from the same starting material.

Oleosomes are natural oil droplets, present in all organisms and abundant in oilseeds. After their aqueous extraction from oilseeds, they can be directly utilized as oil droplets in food, cosmetics and all types of oil-in-water emulsion systems. However, to expand the potential uses of oleosomes as green ingredients and to valorize oilseeds as efficient as possible, we explored their emulsifying ability. Oleosomes were extracted from rapeseeds, and 10.0 wt% oil-in-water emulsions were created after homogenization with 0.5-6.0 wt% oleosomes, and the droplet size of the emulsions and their structure was measured by laser diffraction and confocal laser scanning microscopy (CLSM), respectively. The emulsion with an oleosome concentration lower than 1.0 wt% gave unstable emulsions with visible free oil. At oleosome concentrations at 1.5 wt% or higher, we obtained stable emulsions with droplet sizes between 2.0 and 12.0 µm. To investigate the role of the oleosome interfacial molecules in stabilizing emulsions we also studied their emulsifying and interfacial properties (using drop tensiometry) after isolating them from the oleosome structure. Both oleosomes and their isolated interfacial molecules exhibited a similar behavior on the oil-water interfaces, forming predominantly elastic interfacial films, and also showed a similar emulsifying ability. Our results show that oleosomes are not stabilizing the oil-in-water emulsions as intact particles, but they provide their interfacial molecules, which are enough to stabilize an oil-water surface up to about 2 times bigger than the initial oleosome surface. The understanding of the behavior of oleosomes as emulsifiers, opens many possibilities to use oleosomes as alternative to synthetic emulsifiers in food and pharma applications., Competing Interests: Declaration of Competing Interest The authors have declared that no competing interest exist. This manuscript has not been published and is not under consideration for publication in any other journal. All authors approve this manuscript and its submission to the Journal of Colloids and Surfaces B: Biointerfaces., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

It has been reported that lipid droplets (LDs), called oleosomes, have an inherent ability to inflate or shrink when absorbing or fueling lipids in the cells, showing that their phospholipid/protein membrane is dilatable. This property is not that common for membranes stabilizing oil droplets and when well understood, it could be exploited for the design of responsive and metastable droplets. To investigate the nature of the dilatable properties of the oleosomes, we extracted them from rapeseeds to obtain an oil-in-water emulsion. Initially, we added an excess of rapeseed oil in the dispersion and applied high-pressure homogenization, resulting in a stable oil-in-water emulsion, showing the ability of the molecules on the oleosome membrane to rearrange and reach a new equilibrium when more surface was available. To confirm the rearrangement of the phospholipids on the droplet surface, we used molecular dynamics simulations and showed that the fatty acids of the phospholipids are solubilized in the oil core and are homogeneously spread on the liquid-like membrane, avoiding clustering with neighbouring phospholipids. The weak lateral interactions on the oleosome membrane were also confirmed experimentally, using interfacial rheology. Finally, to investigate whether the weak lateral interactions on the oleosome membrane can be used to have a triggered change of conformation by an external force, we placed the oleosomes on a solid hydrophobic surface and found that they destabilise, allowing the oil to leak out, probably due to a reorganisation of the membrane phospholipids after their interaction with the hydrophobic surface. The weak lateral interactions on the LD membrane and their triggered destabilisation present a unique property that can be used for a targeted release in foods, pharmaceuticals and cosmetics.

Immature rice has potential to be used as healthy food. The relation between molecular structure and rheological properties was investigated. The lamellar repeating distance (8.42-8.63 nm) and crystalline thickness (4.60-4.72 nm) were not different among stages indicating a complete lamellar structure even at early stage. The relative crystallinity was higher in dough (39.62 %) than milky (36.69 %) and mature starch (35.22 %) caused by molecular structure, amylose, and amylose-lipid complex. The short amylopectin branched chains (A and B1) in dough starch were easily entangled resulted in higher Payne effect and elastic dominant. Dough starch paste exhibited higher G' Max (738 Pa) than milky (685 Pa) and mature (645 Pa) starch. In a non-linear viscoelastic regime, small strain hardening was found in milky and dough starch. Mature starch showed the highest plasticity and shear thinning at high-shear strains as the long-branched chains (B3) microstructure was disrupted, disentangled, followed by chain orientation along shear., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Hypothesis: Multiphase materials are often subjected to large deformations during processing, but the rheological responses of complex interfaces (e.g. stabilized by proteins) in this nonlinear deformation regime are still poorly understood. We expect nonlinearities in the response to be introduce by changes of the interfacial network and surface density of the emulsifier., Experiments: Large amplitude oscillatory dilatation (LAOD) experiments were performed on WPI-, pea albumin-, pea globulin- and rapeseed lecithin-stabilized interfaces and analyzed with a general stress decomposition (GSD). With GSD, the stress response was decomposed into the four stress terms (τ 1 -τ 4 ). Here, τ 1 and τ 2 represent, the elastic and viscous contribution of the odd Fourier harmonics, and τ 3 and τ 4 represent the dissipative and recoverable contribution of the even harmonics., Findings: Analysis of WPI-, pea albumin-, pea globulin- and rapeseed lecithin-stabilized interfaces revealed that higher odd harmonics (k≥3) describe in-plane network responses and that even harmonics describe surface density changes. Analysis of these complex interfaces showed that GSD is a valuable tool for (quantitative) description of interfacial responses in LAOD, providing new insights into the origin of asymmetric nonlinear stress responses., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Author(s). Published by Elsevier Inc. All rights reserved.)

This study was to investigate the impact of granule size, amylose content, and starch molecular characteristics on pasting and rheological properties of starch paste/gels in neutral (water) and sugar-acid systems. Normal rice starch (RS), waxy rice starch (WRS), normal tapioca starch (TS), and waxy tapioca starch (WTS) representing small-granule starches and intermediate-granule starches respectively, were used in the study. Impacts of granule size, AM content, and their synergistic effects resulted in different starch susceptibility to acid hydrolysis and interactions between starch and sucrose-water, yielding different paste viscosities in both systems. The high molecular weight (Mw¯) and linearity of amylopectin and amylose molecules increased the consistency of starch pastes. RS produced a stronger and more brittle gel than other starch gels in both neutral and sugar-acid systems. The results indicated the impact of the effect of granule size and amylose content on starch gel behaviors. Properties of waxy starch gels were mainly governed by amylopectin molecular characteristics, especially in the sugar-acid system. Adding sugar and acid had minor impacts on starch gel behaviors in the linear viscoelastic (LVE) region but were most evident in the nonlinear response regime of starch gels as shown in the Lissajous curves at large oscillatory strain.

Understanding the interface-stabilizing properties of surface-active components is key in designing stable macroscopic multiphase systems, such as emulsions and foams. When poorly soluble materials are used as an interface stabilizer, the insoluble material may sediment and interfere with the analysis of interfacial properties in pendant (or hanging) drop tensiometry. Here, the impact of sedimentation of particles on the interfacial properties determined by pendant drop tensiometry was evaluated using a model system of whey protein isolate and (non surface-active) glass beads (2.2-34.7 μm). Although the glass beads did not adsorb to the air-water interface, a 1% (w/w) glass bead solution appeared to decrease the surface tension by nearly 12 mN/m after 3 h. A similar effect was shown for a mixture of whey proteins and glass beads: the addition of 1% (w/w) of glass beads led to an apparent surface tension decrease of 31 mN/m rather than the 20 mN/m observed for pure whey proteins. These effects are attributed to the sedimentation of particles near the apex of the droplet, leading to droplet shape changes, which are interpreted as a decrease in surface tension using tensiometer software. The droplet density at the apex increases due to sedimentation, and this density increase is not accounted for when fitting the droplet shape with the Young-Laplace equation. The result is the observed apparent decrease in surface tension. In contrast to the significant impact of sedimenting material on the surface tension measurements, the impact on the results of oscillatory deformations was limited. These findings show that the impact of sedimentation should be considered when studying the interface-stabilizing properties of materials with reduced solubility, such as certain plant protein extracts. The presence of such particles should be carefully considered when conducting pendant drop tensiometry.

The interest in plant-based meat analogues as an alternative to meat is currently growing. Rheological benchmarking is used to reveal how closely meat analogues resemble the original meat products. Texture maps and dissipation colour schemes were used to reveal similarities in and differences between rheological responses of meat and meat analogues (especially chicken analogues). Under heating, meat analogues differ in terms of their lower elasticity compared with heated meat. The changes caused by heating meat and meat analogues were different as well. Heating of meat resulted in a tougher and more elastic material, while heating has a minor effect on meat analogues. Future developments should therefore focus on routes to create more elasticity and possibly allow heating effects on texture to mimic meat characteristics even better., (© 2022. The Author(s).)

Hypothesis: Plant seeds store lipids in oleosomes, which are storage organelles with a triacylglycerol (TAG) core surrounded by a phospholipid monolayer and proteins. Due to their membrane components, oleosomes have an affinity for the air/oil-water interface. Therefore, it is expected that oleosomes can stabilise interfaces, and also compete with proteins for the air-water interface., Experiments: We mixed rapeseed oleosomes with whey protein isolate (WPI), and evaluated their air-water interfacial properties by interfacial rheology and microstructure imaging. To understand the contribution of the oleosome components to the interfacial properties, oleosome membrane components (phospholipids and membrane proteins) or rapeseed lecithin (phospholipids) were also mixed with WPI., Findings: Oleosomes were found to disrupt after adsorption, and formed TAG/phospholipid-rich regions with membrane fragments at the interface, forming a weak and mobile interfacial layer. Mixing oleosomes with WPI resulted in an interface with TAG/phospholipid-rich regions surrounded by whey protein clusters. Membrane components or lecithin mixed with proteins also resulted in an interface where WPI molecules aggregated into small WPI domains, surrounded by a continuous phase of membrane components or phospholipids. We also observed an increase in stiffness of the interfacial layer, due to the presence of oleosome membrane proteins at the interface., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Plants offer a vast variety of protein extracts, typically containing multiple species of proteins that can serve as building blocks of soft materials, like emulsions. However, the role of each protein species concerning the formation of emulsions and interfaces with diverse rheological properties is still unknown. Therefore, deciphering the role of the individual proteins in an extract is highly relevant, since it determines the optimal level of purification, and hence the sustainability aspects of the extract. Here, we will show that when oil/water emulsions were prepared with a rapeseed protein extract containing napins and cruciferins (in a mass ratio of 1:1), only napins adsorbed at the interface exhibiting a soft solid-like rheological behavior. The dominance of napins at the interface was ascribed to their small size (radius r = 1.7 nm) and its unique Janus-like structure, as 45% of the amino acids are hydrophobic and primarily located at one side of the protein. Cruciferins with a bigger size (r = 4.4 nm) and a more homogeneous distribution of the hydrophobic domains couldn't reach the interface, but they appear to just weakly interact with the adsorbed layer of napins., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 The Author(s). Published by Elsevier Inc. All rights reserved.)

The linear and nonlinear rheological behaviors of heterogeneous emulsions gels made from natural glycyrrhizic acid (GA) nanofibrils and sitosterol-oryzanol mixtures (sterols) were investigated using small amplitude oscillatory shear (SAOS) and large amplitude oscillatory shear (LAOS). The nonlinear rheological response was qualitatively analyzed using normalized Lissajous-Bowditch curves. The microstructure of the emulsion gels strongly depended on the concentration of sterols in the oil phase, and showed a percolated segregated network at 10-20 wt% sterols due to the partial coalescence of droplets, and a jamming transition without coalescence at higher sterols concentration of 30 wt%. The microstructure differences led to different linear and nonlinear viscoelastic behaviors of these emulsion gels. SAOS tests showed that the oil phase structuring by the sterols significantly enhance the viscoelasticity of GA nanofibril emulsion gels, and the percolating emulsion gels exhibited higher elasticity than the jammed emulsion gel, as evidenced by a lower damping factor and frequency power-law exponent. The data of crossover strain, phase angle, and the normalized Lissajous-Bowditch curves from LAOS tests further revealed that compared to the samples in a jammed state or without oil phase structuring, the emulsion gels with a percolating segregated network showed higher structural elasticity and thus were more resistant to large deformations, probably due to the slow relaxation of rigid, hydrodynamically interacting clusters of partially coalesced droplets. These findings could potentially aid in the design of novel emulsion gels, based on all-natural and sustainable building blocks, with specific textural and functional properties for foods, cosmetics, and pharmaceutical applications., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Hypothesis: Escin, a monodesmosidic triterpenoid saponin, was shown previously to form viscoelastic interfaces with a very high dilatational and surface shear storage modulus. This is expected to be due to the arrangement of Escin into 2D disordered soft viscoelastic solid interfacial structures, which results in turn in a distribution of relaxation times., Experiments: The responses to dilatational and surface shear deformations of Escin-stabilized air-water interfaces were studied, both in the linear viscoelastic (LVE) and non-linear (NLVE) regime. Step relaxation and amplitude sweeps were performed in dilatation experiments. For surface shear, amplitude sweeps and creep recovery experiments were performed., Findings: Escin stabilized-interfaces displayed a highly non-linear behavior in dilatation as seen in the Lissajous plots. In large oscillatory shear the Lissajous curves had a rhomboidal shape, indicating intracycle yielding and recovery, typical of glassy systems. The relaxation of the interface showed stretched exponential behavior, with stretched exponents typical of disordered solids with dynamic heterogeneity. The use of surface rheological measurements beyond the commonly measured LVE regime clearly has provided new insights into the behavior of these interfaces and their microstructure. These results highlight the need to reconsider other complex interfaces as disordered solids and not as 2D homogenous viscoelastic fluids., (Copyright © 2019 The Author(s). Published by Elsevier Inc. All rights reserved.)

Surface dilatational viscoelasticity of adsorbed layers of pluronics triblock copolymers at the air-water interface was measured using the oscillating barrier technique. The effect of molecular architecture and concentration on surface viscoelasticity was explored for two different types of pluronics with different degrees of hydrophobicity, Pluronic F-108 ( M w ≈ 14 600 g/mol) and Pluronic P-123 ( M w ≈ 5800 g/mol), the former exhibiting a larger hydrophilic to hydrophobic block length ratio. Frequency sweeps in the linear regime suggested that interfacial films of F-108 have higher surface limiting elasticity and larger in-plane and out-of-plane relaxation times at the same bulk concentration (the former possibly related to in-plane microstructure rearrangements, the latter to surface/bulk diffusion). Increasing the bulk concentration of pluronics from 1 to 100 μM led to a decrease in both in- and out-of-plane relaxation times. Large amplitude oscillatory dilatation (LAOD) tests were performed to capture nonlinear behavior of these interfacial films by means of elastic and viscous Lissajous plots. Nonlinearities in elastic responses were quantified through calculation of the strain-stiffening indices in extension S E and compression S C . Both pluronics exhibited strain softening in extension. In compression, P-123 showed strain-hardening and F-108 displayed a relatively linear response. Apparent strain hardening in extension was observed for the P-123 adsorbed film, at high strain, at a bulk concentration of 100 μM. However, at these strains, the response was dominated by the viscous contribution and calculation of strain rate-thickening factors in extension and compression showed that the overall response was strain rate-thinning in extension and strain rate-thickening in compression.

Complex interfaces stabilized by proteins, polymers or nanoparticles, have a much richer dynamics than those stabilized by simple surfactants. By subjecting fluid-fluid interfaces to step extension-compression deformations, we show that in general these complex interfaces have dynamic heterogeneity in their relaxation response that is well described by a Kohlrausch-Williams-Watts function, with stretch exponent β between 0.4-0.6 for extension, and 0.6-1.0 for compression. The difference in β between expansion and compression points to an asymmetry in the dynamics. Using atomic force microscopy and simulations we prove that the dynamic heterogeneity is intimately related to interfacial structural heterogeneity and show that the dominant mode for stretched exponential relaxation is momentum transfer between bulk and interface, a mechanism which has so far largely been ignored in experimental surface rheology. We describe how its rate constant can be determined using molecular dynamics simulations. These interfaces clearly behave like disordered viscoelastic solids and need to be described substantially different from the 2d homogeneous viscoelastic fluids typically formed by simple surfactants.

The gas-liquid expanded phase transition of a Langmuir monolayer happens at very low surface concentrations which makes this phenomenon extremely expensive to explore in finite three-dimensional (3D) atomistic simulations. Starting with a 3D model reference system of amphiphilic surfactants at a 2D vapor-liquid interface, we apply our recently developed approach (Phys. Chem. Chem. Phys., 2018, 20, 16238) and map the entire system to an effective 2D system of surfactant center-of-masses projected onto the interface plane. The coarse-grained interaction potential obtained via a force-matching scheme from the 3D simulations is then used to predict the 2D gas-liquid phase equilibrium of the corresponding Langmuir monolayer. Monte Carlo simulations in the Gibbs ensemble are performed to calculate areal densities, chemical potentials and surface pressures of the gaseous and liquid coexisting phases within the monolayer. We compare these simulations to the results of a 2D density functional approach based on Weeks-Chandler-Anderson perturbation theory. We furthermore use this approach to determine the density profiles across the equilibrium gas-liquid dividing line and the corresponding line tensions.

Colloidal particles adsorbed at fluid-fluid interfaces interact via mechanisms that can be specific to the presence of interfaces, for instance, lateral capillary interactions induced by nonspherical particles. Capillary interactions are highly relevant for self-assembly and the formation of surface microstructures, however, these are very challenging to model due to the multibody nature of capillary interactions. This work pursues a direct comparison between our computational modelling approach and experimental results on surface microstructures formed by ellipsoidal particles. We begin by investigating the accuracy of using pairwise interactions to describe the multibody capillary interaction by contrasting exact two- and three-particle interaction energies and we find that the pairwise approximation appears reasonable for the experimentally relevant configurations studied. We then develop an empirical pair potential and use it in Monte-Carlo type simulations to efficiently model the structure formation process for relevant particle properties such as aspect ratio, contact angle and surface coverage, and succeed in reproducing our experimental observations where we spread sterically-stabilised ellipsoidal particles onto an oil-air interface at high surface coverage. At lower surface coverages, we find that the self-assembly process falls into the diffusion-limited colloid aggregation universality class., (Copyright © 2018 Elsevier Inc. All rights reserved.)

Cellulose nanocrystals (CNCs) are an emerging natural material with the ability to stabilize fluid/fluid interfaces. Native CNC is hydrophilic and does not change the interfacial tension of the stabilized emulsion or foam system. In this study, rodlike cellulose particles were isolated from hemp and chemically modified to alter their hydrophobicity, i.e., their surface activity, which was demonstrated by surface tension measurements of the particles at the air/water interface. The buildup and mechanical strength of the interfacial structure were investigated using interfacial shear and dilatational rheometry. In contrast to most particle or protein-based interfacial adsorption layers, we observe in shear flow a Maxwellian behavior instead of a glasslike frequency response. The slow and reversible buildup of the layer and its unique frequency dependence indicate a weakly aggregated system, which depends on the hydrophobicity and, thus, on the contact angle of the CNC particles at the air/water interface. Exposed to dilatational flow, the weakly aggregated particles cluster and form compact structures. The interfacial structure generated by the different flow fields is characterized by the contact angle, immersion depth, and layer roughness obtained by neutron reflectometry with contrast variation while the size and local structural arrangement of the CNC particles were investigated by AFM imaging.

Pectins with distinct molecular design were isolated by aqueous extraction at pH 2.0 or 6.0 and were examined in terms of their formation and stabilisation capacity of model n-alkane-in-water emulsions at acidic pH (pH 2.0). The properties and stability of the resulting emulsions were examined by means of droplet size distribution analysis, Lifshitz-Slyozov-Wagner modelling, bulk rheology, interfacial composition analysis, large-amplitude oscillatory surface dilatational rheology, electrokinetic analysis and fluorescence microscopy. Both pectin preparations were able to emulsify alkanes in water but exhibited distinct ageing characteristics. Emulsions prepared using pectin isolated at pH 6.0 were remarkably stable with respect to droplet growth after thirty days of ageing, while those prepared with pectin isolated at pH 2.0 destabilised rapidly. Examination of chemical composition of interfacial layers indicated multi-layered adsorption of pectins at the oil-water interface. The higher long-term stability of emulsions prepared with pectin isolated at high pH is attributed to mechanically stronger interfaces, the highly branched nature and the low hydrodynamic volume of the chains that result in effective steric stabilisation whereas acetyl and methyl contents do not contribute to the long-term stability. The present work shows that it is possible by tailoring the fine structure of pectin to engineer emulsions that operate in acidic environments., (Copyright © 2016 Elsevier B.V. All rights reserved.)