Search

International audience; Cosmic explosions have emerged as a major field of astrophysics over the last years with our increasing capability to monitor large parts of the sky in different wavelengths and with different messengers (photons, neutrinos, and gravitational waves). In this context, gamma-ray bursts (GRBs) play a very specific role, as they are the most energetic explosions in the Universe. The forthcoming Sino-French SVOM mission will make a major contribution to this scientific domain by improving our understanding of the GRB phenomenon and by allowing their use to understand the infancy of the Universe. In order to fulfill all of its scientific objectives, SVOM will be complemented by a fast robotic 1.3 m telescope, COLIBRI, with multiband photometric capabilities (from visible to infrared). This telescope is being jointly developed by France and Mexico. The telescope and one of its instruments are currently being extensively tested at OHP in France and will be installed in Mexico in spring 2023.

Focus precision and stability is crucial in confocal microscopy not only for image sharpness but also to avoid radiometric fluctuations that can wrongly be interpreted as variations of the fluorescence intensity in the sample. Here we report a focus variation provoked by a continuous wave laser of 810-nm wavelength introduced along the optical path of an inverted confocal microscope with an oil immersion ×60 objective. When the laser is turned on or off, the focus position drifts toward lower or high values of the vertical coordinate z, respectively. The maximum drift observed was 2.25 𝜇m for a laser power of 40 mW at the sample and over a 600-s exposure time. The temporal evolution of the focus position is well fitted by exponential curves that mimic temperature variations due to a heat source. Our analysis strongly suggests that the focus drift is due to heating of the immersion oil.

FRIDA is a diffraction-limited imager and integral-field spectrometer that is being built for the adaptive-optics focus of the Gran Telescopio Canarias. In imaging mode FRIDA will provide scales of 0.010, 0.020 and 0.040 arcsec/pixel and in IFS mode spectral resolutions of 1500, 4000 and 30,000. FRIDA is starting systems integration and is scheduled to complete fully integrated system tests at the laboratory by the end of 2017 and to be delivered to GTC shortly thereafter. In this contribution we present a summary of its design, fabrication, current status and potential scientific applications.

COLIBRÍ will be a Franco-Mexican 1.3-m telescope and imager for observing the visible and near infrared counterparts of transient events detected by the future SVOM mission. The imager is divided into two instruments: DDRAGO, with two 4k[Formula: see text][Formula: see text][Formula: see text]4k CCDs observing in [Formula: see text] and [Formula: see text], respectively, and CAGIRE, with one 2k[Formula: see text][Formula: see text][Formula: see text]2k LYNRED or H2RG detector observing in [Formula: see text]. DDRAGO will directly image the telescope focal plane with a field of view (FoV) of 26[Formula: see text][Formula: see text][Formula: see text]26 arcmin. CAGIRE will reimage the focal plane to make a pupil image available for a cold stop and adjust the plate scale to deliver a similar FoV. CAGIRE will not use a conventional collimator-camera configuration but rather an arrangement of lenses that sends the pupil image close to the focal plane after all of the reimaging optics. This allows most of the optics, including the infrared filters, to be at ambient temperature and avoids the complexity of having mechanisms and powered optics within the cryostat (CR). We present here the optical design of the system and a thorough analysis on the expected image quality of the instruments and the telescope.

We present optical photometry of the afterglow of the long GRB 180205A with the COATLI telescope from 217 seconds to about 5 days after the {\itshape Swift}/BAT trigger. We analyse this photometry in the conjunction with the X-ray light curve from {\itshape Swift}/XRT. The late-time light curves and spectra are consistent with the standard forward-shock scenario. However, the early-time optical and X-ray light curves show non-typical behavior; the optical light curve exhibits a flat plateau while the X-ray light curve shows a flare. We explore several scenarios and conclude that the most likely explanation for the early behavior is late activity of the central engine.

We present in this article some of the techniques applied at the Instituto de Astronomia of the Universidad Nacional Autonoma de Mexico (IA-UNAM) to the mechanical structural design for astronomical instruments. With this purpose we use two recent projects developed by the Instrumentation Department. The goal of this work is to give guidelines about support structures design for achieving a faster and accurate astronomical instruments design. The main guidelines that lead all the design stages for instrument subsystems are the high-level requirements and the overall specifications. From these, each subsystem needs to get its own requirements, specifications, modes of operation, relative position, tip/tilt angles, and general tolerances. Normally these values are stated in the error budget of the instrument. Nevertheless, the error budget is dynamic, it is changing constantly. Depending on the manufacturing accuracy achieved, the error budget is again distributed. That is why having guidelines for structural design helps to know some of the limits of tolerances in manufacture and assembly. The error budget becomes then a quantified way for the interaction between groups; it is the key for teamwork.

We propose an alternative method to generate an artificial reference source for a Ground Layer Adaptive Optics system airborne on a Multirotor Unmanned Aerial Vehicle. Turbulence profiles from the Ground Layer at the National Astronomical Observatory in San Pedro Martir were analyzed to establish the requirements in luminosity, altitude, and flight stability of an artificial source. We found the source must be at least 800 m above the observatory's surface and follow a fixed trajectory to emulate the apparent movement of the stars with a stability of 1.54 cm in time intervals smaller than 18 ms. We establish some commercial and customized MUAVs can nearly accomplish this task., Comment: 7 pages, 1 figure

At present, new approaches for the use of drones in high-precision optical applications are rising, especially with those known as multirotor. However, the optical turbulence effects generated by multirotor drones are not entirely understood. These optical effects can reduce the performance of the optical instruments that they transport. We present measurements of the wavefront deformation generated by the temperature fluctuations and the airflow of a drone’s propulsion system. To do so, we used a single arm of a DJI S800 EVO Hexacopter (professional drone) and measured its operating temperature with a commercial infrared camera. The resulting temperature variation, between a switched-off propulsion system at room temperature and one running at its maximum performance, was 34.2°C. Later, we performed two different interferometric tests: Takeda’s method and the phase-shifting technique, using a ZYGO interferometer. These tests show that the total deformation over an incident wavefront to the propeller airflow is lower than 0.074 λ PV and 0.007 λ RMS (HeNe laser, λ = 633 nm). We determine that the optical turbulence produced by a drone propulsion system is negligible.

COATLI is a new instrument and telescope that will provide 0.3 arcsec FWHM images from 550 to 920 nm over a large fraction of the sky. It consists of a robotic 50-cm telescope with a diffraction-limited imager. The imager has a steering mirror for fast guiding, a blue channel using an EMCCD from 400 to 550 nm to measure image motion, a red channel using a standard CCD from 550 to 920 nm, and an active optics system based on a deformable mirror to compensate static aberrations in the red channel. Since the telescope is small, fast guiding will provide diffraction-limited image quality in the red channel over a large fraction of the sky, even in relatively poor seeing. The COATLI telescope will be installed at the Observatorio Astronomico Nacional in Sierra San Pedro Martir, Baja California, Mexico, in 2016 and will initially operate with a simple interim imager. The definitive COATLI instrument will be installed in 2017. In this work we present the general optomechanical and control electronics design of COATLI.

FRIDA will be a near infrared imager and integral field spectrograph covering the wavelength range from 0.9 to 2.5 microns. FRIDA will work in two observing modes: direct imaging and integral field spectroscopy. This paper presents the main structure of the FRIDA mechanisms control system. In order to comply with a high level of re-configurability FRIDA will comprise eight cryogenic mechanisms and one room temperature mechanism. Most of these mechanisms require high positioning repeatability to ensure FRIDA fulfills with high astronomical specifications. In order to set up the mechanisms positioning control parameters a set of programs have been developed to perform several tests of mechanisms in both room and cryogenic environments. The embedded control software for most of the FRIDA mechanisms has been developed. A description of some mechanisms tests and the software used for this purpose are presented.

We present a real-time, fully automated method to remove instrumental signatures from stellar scintillation images. The method was developed in connection with the Low Layer SCIDAR (Scintillation Detection and Ranging) (LOLAS), an instrument dedicated to the measurement of atmospheric optical-turbulence profiles, , in the first kilometre of altitude, with high altitude-resolution. By examining the scintillation images and their correlation maps we evaluate, and then correct, image deficiencies typical of a portable telescope, such as defocus, image movement, field rotation and tracking errors, prior to processing according to the SCIDAR technique. In addition, detector spreading noise is corrected for, and flux variations caused by clouds or fog are monitored. The efficiency of the methods is demonstrated by comparing double-star scintillation autocorrelations obtained with and without the use of the self-adjusting procedures. Applying those stabilization methods, LOLAS was successfully exploited to characterize the vertical profiles along the lower layer on top of Mauna Kea Observatory.

We present the design concept and validation of a cryogenic lens mount for a noncemented doublet for the near-infrared diffraction limited instrument FRIDA. The design uses an autocentering mount that maintains the relative alignment of the lenses, acting against any displacement that may be induced by external forces by automatically returning the lenses to their nominal positions. Autocentering techniques have been used for instruments at room temperature with relatively relaxed image quality requirements. We present in detail its application to a mount for a cryogenic instrument working at the diffraction limit. The design has been tested on the collimator of FRIDA, a noncemented doublet of CaF2 and S-FTM16. We describe the alignment requirements of the system, and we show the calculations that ensure that the lenses will suffer both appropriate stresses and temperature differences. We present the experimental validation of a prototype, demonstrating that the design delivers an excellent performance without inducing unnecessary stresses on the optical components, provided that the lenses are previously aligned with very high precision.

Curvature wavefront sensors obtain the wave-front aberrations from two defocused intensity images at each side of the pupil plane. Typically, when high modulation speeds are required, as it is the case with Adaptive Optics, that defocusing is done with a fast vibrating membrane mirror. We propose an alternative defocusing mechanism based on an electrowetting variable focus liquid lens. The use of such lenses may perform the required focus modulation without the need of extra moving parts, reducing the overall size of the system.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias (GTC)) is designed as a diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy capabilities with low, intermediate and high (R ~ 30,000) spectral resolutions, to operate in the wavelength range 0.9 – 2.5 μm. The integral field unit is based on a monolithic image slicer and the imaging and IFS observing modes will use the same Teledyne 2Kx2K detector. FRIDA will be based on a Nasmyth B of GTC, behind the adaptive optics (AO) system. The key scientific objectives of the instrument include studies of solar system bodies, low mass objects, circumstellar outflow phenomena in advanced stages of stellar evolution, active galactic nuclei high redshift galaxies, including resolved stellar populations, semidetached binary systems, young stellar objects and star forming environments. FRIDA subsystems are presently being manufactured and tested. In this paper we present the challenges to perform the verification of some critical specifications of a cryogenic and diffraction limited NIR instrument as FRIDA. FRIDA is a collaborative project between the main GTC partners, namely, Spain, Mexico and Florida.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) has been designed as a cryogenic and diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy (IFS). Both, the imaging mode and IFS observing modes will use the same Teledyne 2Kx2K detector. This instrument will be installed at Nasmyth B station, behind the GTC Adaptive Optics system (GTCAO). FRIDA will provide the IFS mode using a 30 slices Integral Field Unit (IFU). This IFU design is based on the University of Florida FISICA where the mirror block arrays are diamond turned on monolithic metal blocks. The FRIDA IFU is of the slicer type; conformed mainly by 3 mirror blocks with 30 spherical mirrors each. It also has a Schwarzschild relay based on two off axis spherical mirrors and an afocal system of two parabolic off axis mirrors. Including two insertion mirrors the IFU holds 96 metal mirrors. All the mirrors have been manufactured by diamond turning techniques on monolithic blocks of aluminum 6061-T6 coated by a Nickel alloy. Except for the Schwarzschild relay and the insertion mirrors, 92 mirrors were manufactured by Corning in Keene NH, USA. The different blocks and mirrors are mounted on an opto-mechanical support that ensures the image quality and integrity of the complete IFU. In this work advances on the manufacturing of the FRIDA IFU components are described. Furthermore, the mirror blocks individual verification tests and are also described.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) has been designed as a cryogenic and diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy (IFS). Both, the imaging mode and IFS observing modes will use the same Teledyne 2Kx2K detector. This instrument will be installed at Nasmyth B station, behind the GTC Adaptive Optics system (GTCAO). FRIDA will provide the IFS mode using a 30 slices Integral Field Unit (IFU). This IFU design is based on University of Florida FISICA where the mirror block arrays are diamond turned on monolithic metal blocks. FRIDA IFU is conformed mainly by 2 mirror blocks with 30 spherical mirrors each. The image slicing is performed by a block of 30 cylindrical mirrors each of 400 μm width. It also has a Schwarzschild relay based on two off axis spherical mirrors that adapts the GTCAO corrected PSF to the slicer mirrors dimensions. To readapt the sliced PSF to the spectrograph input numerical aperture the IFU has an afocal system of two parabolic off axis mirrors. The AO PSF is bigger than the slice mirror dimensions and this produces diffraction effects. These diffraction effects combined with the intrinsic IFU and spectrograph aberrations produce the final instrumental PSF of the IFS mode. In order to evaluate the instrumental PSF quality of the FRIDA IFS, modeling simulations were performed by the ZEMAX Physical Optics Propagation (POP) module. In this work the simulations are described and the PSF quality and uniformity on a reconstructed IFS image is evaluated. It is shown the PSF quality of the IFS mode including the instrument manufacturing tolerances fulfills the specifications.

FRIDA will be a near infrared imager and integral field spectrograph covering the wavelength range from 0.9 to 2.5 microns. Primary observing modes are: direct imaging and integral field spectroscopy. This paper describes the main advances in the development of the electronics and control system for both the mechanisms and house-keeping of FRIDA. In order to perform several tests of mechanisms in both room and cryogenic environments, a set of programs had been developed. All variables of the vacuum control system were determined and the main control structure based on one Programmable Logic Controller (PLC) had been established. A key function of the FRIDA’s control system is keeping the integrity of cryostat during all processes, so we have designed a redundant heating control system which will be in charge of avoiding cryostat inner overheating. In addition, some improvements of cryogenic and room temperature cabling structure are described.

FRIDA is a diffraction limited imager and integral field spectrometer that is being built for the Gran Telescopio Canarias. FRIDA has been designed and is being built as a collaborative project between institutions from Mexico, Spain and the USA. In imaging mode FRIDA will provide scales of 0.010, 0.020 and 0.040 arcsec/pixel and in IFS mode spectral resolutions R ~ 1000, 4,500 and 30,000. FRIDA is starting systems integration and is scheduled to complete fully integrated system tests at the laboratory by the end of 2015 and be delivered to GTC shortly after. In this contribution we present a summary of its design, fabrication, current status and potential scientific applications.

The nulling coronagraph, first proposed by Roddier and Roddier, uses a small mask (less than half the size of the central Airy spot) that shifts the phase of the incoming light by 180° to strongly attenuate the Airy spot as well as the rings. We report on both theoretical and laboratory performance. In our laboratory experiment, we reduce the peak intensity of the Airy pattern by a factor of 16. We derive estimates of the performance of a nulling coronagraph used on a telescope equipped with an adaptive optics system, based upon the performance of the University of Hawaii Hokupa'a adaptive optics system. On a 3.6 m telescope at 1.65 μm, it is found that a tip/tilt amplitude lower than 20 mas is needed for such a coronagraph to yield an extinction better than 2 stellar mag.

The results obtained from 3398 vertical profiles of atmospheric turbulence measured during 11 nights at the Observatorio Astronomico Nacional in San Pedro Martir (Baja California, Mexico) are presented. The observations were carried out with the generalized scidar (GS) installed at the 1.5 m and the 2.1 m telescopes of that site, in 1997 March and April. The open-air seeing was measured with a differential image motion monitor (DIMM). The GS can detect turbulence profiles along the whole optical path, unlike the classical scidar, which is insensitive to low-altitude turbulence. For the first time, to our knowledge, profiles including turbulence near the ground are monitored and statistically analyzed. Isoplanatic angles for speckle interferometry and adaptive optics (AO) in either full or partial compensation are deduced, as well as the focus anisoplanatism parameter for sodium laser guide stars. The advantage of minimizing the distance between the turbulent layers and the conjugated plane of the deformable mirror of an AO system is studied. The comparison of GS profiles obtained at both telescopes, together with DIMM measurements, show that the turbulence near the ground is more strongly dominant at the 1.5 m telescope than at the 2.1 m telescope, where the median values of the seeing near the ground, in the free atmosphere and in the whole optical path are , and , respectively. These values are comparable to or better than those of the major astronomical observatories, although a larger data sample is needed for a definitive comparison.

FRIDA has been conceived as the first science instrument for the adaptive optics system of the Gran Telescopio Canarias (GTC). It is designed to be installed at the Nasmyth A platform, behind the GTC adaptive optics system. FRIDA will be a diffraction limited, near infrared imager and integral field spectrograph sensitive from 0.9 to 2.5 μm. It may also include provisions for future upgrades such as coronographic masks and long slits. FRIDA is a collaborative project between the Instituto de Astronomia, UNAM, Mexico, the Instituto de Astrofisica de Canarias, Spain, and the Astronomy Department of the University of Florida, USA.

FRIDA will be a common-user near infrared imager and integral field spectrograph covering the wavelength range from 0.9 to 2.5 microns. Primary observing modes driven the instrument design are two: direct imaging and integral field spectroscopy. FRIDA will be installed at the Nasmyth-B platform of the Gran Telescopio Canarias (GTC) behind the GTC Adaptive Optics (GTCAO) system. Instrument will use diffraction-limited optics to avoid degrading the high Strehl ratios derived by the GTCAO system in the near infrared. High-performance astronomical instruments with a high reconfiguration degree as FRIDA, not only depends on optical and mechanical efficient designs but also on the good quality of its electronics and control systems design. In fact, astronomical instruments operating performance on telescope greatly relies on electronics and control system. This paper describes the main design topics for the FRIDA electronics and mechanisms control system, pointing on the development that these areas have reached on the project status. FRIDA Critical Design Review (CDR) was held on September 2011.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) has been designed as a cryogenic and diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy (IFS). Both, the imaging mode and IFS observing modes will use the same Teledyne 2Kx2K detector. This instrument will be installed at Nasmyth B station, behind the GTC Adaptive Optics system. FRIDA will provide the IFS mode using a 30 slices Integral Field Unit (IFU). This IFU design is based on University of Florida FISICA where the mirror block arrays are diamond turned on monolithic metal blocks. FRIDA IFU is conformed mainly by 3 mirror blocks with 30 spherical mirrors each. It also has a Schwarzschild relay based on two off axis spherical mirrors and an afocal system of two parabolic off axis mirrors. Including two insertion mirrors the IFU holds 96 metal mirrors. Each block or individual mirror is attached on its own mechanical mounting. In order to study beam interferences with mechanical parts, ghosts and scattered light, an iterative optical-mechanical modeling was developed. In this work this iterative modeling is described including pictures showing actual ray tracing on the opto-mechanical components.

Circular phase mask concepts represent promising options for high contrast imaging and spectroscopy of exo-planets. Depending on their design, they can either work as a diffraction suppression system or as a focal plane wavefront sensor. While the apodized Roddier coronagraph uses a π-phase mask to obtain complete suppression of the star image in monochromatic light, the Zernike sensor uses a π/2-phase mask to measure the residual aberrations in the focal plane by encoding them into intensity variations in the relayed pupil. Implementations of the Zernike sensor can be considered in exoplanet imagers such as VLT-SPHERE, Gemini planet imager, Palomar-P1640 or Subaru-SCExAO to enlarge their capabilities. However, such concepts have not been validated experimentally up to now. Our goal is to perform lab demonstration of this concept on our visible coronagraph testbed at LAM and to propose an upgrade design for SPHERE. In this communication, we report on results of lab measurements of the Zernike sensor and determine its sensitivity to small wavefront errors.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) is designed as a diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy capabilities with low (R similar to 1,500), intermediate (R similar to 4,500) and high (R similar to 30,000) spectral resolutions to operate in the wavelength range 0.9 - 2.5 mu m. The integral field unit is based on a monolithic image slicer. The imaging and IFS observing modes will use the same Teledyne 2K x 2K detector. FRIDA will be based at the Nasmyth B platform of GTC, behind the AO system. The key scientific objectives of the instrument include studies of solar system bodies, low mass objects, circumstellar outflow phenomena in advanced stages of stellar evolution, active galactic nuclei, high redshift galaxies, resolved stellar populations, semi-detached binary systems, young stellar objects and star forming environments. FRIDA is a collaborative project between the main GTC partners, namely, Spain, Mexico and Florida. In this paper, we present the status of the instrument design as it is currently being prepared for its manufacture, after an intensive prototypes' phase and design optimization. The CDR was held in September 2011.

The Mid-resolution InfRAreD Astronomical Spectrograph (MIRADAS, a near-infrared multi-object echelle spectrograph operating at spectral resolution R=20,000 over the 1-2.5 mu m bandpass) was selected in 2010 by the Gran Telescopio Canarias (GTC) partnership as the next-generation near-infrared spectrograph for the world's largest optical/infrared telescope, and is being developed by an international consortium. The MIRADAS consortium includes the University of Florida, Universidad de Barcelona, Universidad Complutense de Madrid, Instituto de Astrofisica de Canarias, Institut de Fisica d'Altes Energies, Institut d'Estudis Espacials de Catalunya and Universidad Nacional Autonoma de Mexico, as well as probe arm industrial partner A-V-S (Spain). In this paper, we review the overall system design for MIRADAS, as it nears Preliminary Design Review in the autumn of 2012.

Stellar coronagraphs using circular phase masks are promising concepts dedicated to the image suppression of an observed bright star in order to enhance the substellar mass companions present in its vicinity, typically 2 λ/D angular separation. These concepts include a focal plane phase mask which introduces a phase delay on a part of the stellar image. With an adequate choice of the mask parameters (thickness, diameter), the light going through the mask and the light going outside the mask will interfere destructively inside the geometric pupil in the following pupil plane. The light rejected outside this re-imaged pupil will be blocked by a Lyot stop. Typically, the mask physical size is about λF, where F denotes the f-number of the optical system, and the mask thickness depends on the required phase shifting. The contrast provided by these concepts is highly related to the quality of thickness profile of the phase mask and therefore, severe manufacturing tolerances are necessary to reach the theoretical performance of the corresponding coronagraphic system. In 2007, we designed a Roddier & Roddier phase mask with a 65 μm diameter and ordered it to GEPI of Paris Observatory which manufactured it using ion etching process. A roughness of 0.8 nm rms and a transition width of 1% of the mask diameter were measured with a profilometer for this mask showing the good quality of the mask (N'Diaye et al. 2010). We pursue our efforts to design and manufacture high quality masks in collaboration with the firm SILIOS. Several tests of manufacturing procedures are currently realized to reach the best trade-off between mask roughness and mask transition width. These values, measured in our laboratory with a profilometer, allow us to determine the best configuration for fabrication. In addition, by knowing the mask profile, we can estimate theoretically the performance that can be reached.

Stellar coronagraphy is a key technology for current and future instruments for exoplanet imaging and spectroscopy, both on the ground and in space. We pursue the research on coronagraphs based on circular phase masks and report in this paper on recent advances in terms of the trade between spectral bandwidth and achievable contrast. Circular phase masks combined with colored apodizations prove to be promising options in such coronagraphic systems to reach high contrast gains within the search area over a wide band of wavelengths.

International audience; Context. Coronagraphic techniques are required to observe substellar mass companions close to nearby bright stars by direct imagery. Phase mask coronagraphs are particularly interesting because they give access to the innermost regions. While the principle of the first such concept was validated experimentally a decade ago, the achieved brightness attenuation was too low to be conclusive, probably due to the imperfect thickness profile of the mask. Aims. We have manufactured and tested a second-generation Roddier & Roddier coronagraph in preparation for the development of more elaborate phase mask designs, planned to be used in the future European Extremely Large Telescope. Methods. A monolithic phase mask was made by ion beam machining. Experimentally obtained coronagraphic images were compared with simulated images. Results. Good agreement with theory was obtained. A peak attenuation of 216 was achieved, and a contrast of similar to 10(-5) was measured at 5.7 lambda/D. The results exploring contrasts obtained at different distances from the star for different mask dimensions are particularly interesting, confirming predictions made in the literature.

In response to an Announcement of Opportunity for new instrumentation for the Gran Telescopio Canarias (GTC) issued on October 2009, an international team led by the University of Florida and composed of scientists and engineers from 8 institutions in 3 countries submitted a proposal for building a highly powerful instrument within the required envelope and budget. The MIRADAS instrument will be a common user NIR multi object spectrograph equipped with a sophisticated multiplexing system (MXS) able to deliver spectral resolutions of R~20,000 in the wavelength range from 1 to 2.5 microns for up to 20 objects simultaneously sparsely distributed over a field of regard of 5 arcmin in diameter. In this paper, we summarize the main instrumental features of the proposed instrument which is under review by the GTC Project Office.

SUMMARYWest Nile virus (WNV) was probably introduced in southern and northern Mexico from the USA in two independent events. Since then, WNV activity has been reported in several Mexican states bordering the USA and the Gulf of Mexico, but disease manifestations seen there in humans and equids are quite different to those observed in the USA. We have analysed WNV seroprevalence in asymptomatic, unvaccinated equids from two Mexican states where no data had been previously recorded. WNV IgG antibodies were detected in 31·6% (91/288) of equine sera from Chiapas and Puebla states (53·3% and 8·0%, respectively). Analysis by plaque reduction neutralization test (PRNT) showed good specificity (99·4%) and sensitivity (84·9%) with the ELISA results. Further analyses to detect antibodies against three different flaviviruses (WNV, St Louis encephalitis virus, Ilheus virus) by haemagglutination inhibition (HI) tests on a subset of 138 samples showed that 53% of the 83 HI-positive samples showed specific reaction to WNV. These data suggest continuous expansion of WNV through Mexico.

We describe diamond-turned material tests for the integral field unit (IFU) for the FRIDA instrument (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias). FRIDA is closely based on the design of the successful FISICA cryogenic infrared image slicing device, which used "monolithic" mirror arrays, diamond turned into single pieces of metal. FRIDA, however, will require better roughness characteristics than the 15nm RMS of FISICA to avoid light scatter in FRIDA's shorter wavelength limit (900nm). Al 6061 seems to be limited to this roughness level by its silicate inclusions so some new combination of materials that are compatible with FRIDA's Al 6061 structure must be found. To this end, we have tested six diamond-turned mirrors with different materials and different platings. We used the Zygo interferometer facility at IA-UNAM to do warm and cold profile measurements of the mirrors to investigate possible bimetallic deformation effects. We present a detailed comparison of the various performance characteristics of the test mirrors.

We describe progress in the construction of an adaptive optics system for the 2.1 meter telescope of the Observatorio Astronomico Nacional on Sierra San Pedro Martir, in Baja California, Mexico. The system will use a 19 element bimorph deformable mirror mounted on an articulated platform and a curvature wavefront sensor with natural guide stars. It will have two modes of operation. In adaptive optics mode, it is expected to give excellent correction above 1.0 μm and good correction down to 0.6-0.9 μm, depending on the seeing, although the sky coverage will be limited. In fast guiding mode, the system should give images at or better than the excellent natural seeing of the site and have much greater sky coverage. The system is currently undergoing laboratory testing.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) has been designed as a diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy (IFS) capabilities with low, intermediate and high spectral resolutions to operate in the wavelength range 0.9 - 2.5 μm. The integral field unit is based on a monolithic image slicer based on the University of Florida FISICA. Both, the imaging mode and IFS observing modes will use the same Rockwell 2K×2K detector. FRIDA will be based at a Nasmyth focus of GTC, behind the GTCAO system. The FRIDA optical design, stray light analysis, tolerance analysis and manufacturing feasibility are described in this contribution.

FRIDA will be an Infrared Imager and an Integral Field Spectrograph (IFS) for the 10 .4 m Gran TelescopioCanarias (GTC). This instrument is scheduled to be installed in 2010, at the Nasmyth A platform of the GTC,behind GTCAO (the Adaptive Optics [AO] system of the GTC). FRIDA design incorporates straightforwardupgrade paths for focal plane masks. In this work, we analyze the capability of FRIDA to provide high dy-namic range images. Dierent coronagraphic con“gurations could be inserted within FRIDA optical assembly.We quantify numerically their performance in presence of AO compensated wavefronts. Thereafter, numericalsimulations about the Simultaneous Spectral Dierential Imaging 1 (SSDI) method are presented. This techniqueaims to suppress the AO residual speckles and can be applied to selected frames of the data cube, provided byFRIDA in IFS mode. Therefore, we estimate the starlight attenuation that could be reached with the associationCoronagraph + SSDI methodŽfor the ground-based instrument GTC + GTCAO + FRIDAŽ.Keywords: high angular resolution, coronagraphy, adaptive optics, image processing

The reconstruction quality of turbulence-induced phase distortions from Hartmann data is calculated for masks with different subpupil forms by means of computer simulations. Four subpupil forms are considered: the circle, the square, the hexagon, and the polar segment. We show that, for the case of a circular aperture, the mask with polar segment subpupils provides the best reconstruction quality.

The influence of the turbulence outer scale on the Strehl ratio obtained with low-order adaptive optics systems is examined by numerical simulation. The Karhunen–Loeve approach is used to generate wave-front samples. A method that allows construction of the outer-scale-dependent Karhunen–Loeve functions is described. It is shown that the Strehl ratio produced by a second-order adaptive optics correction (tip–tilt, defocus, and astigmatism) is affected quite strongly by the finite outer scale. For the higher-order correction, the effect under study is weak and appears only when the outer-scale magnitude becomes less than the aperture diameter. It is also shown that the finite outer scale has a positive effect on the Strehl ratio of the uncorrected long-exposure image.

In March 2004, the Commissioning Instrument (CI) for the GTC was accepted in the site of The Gran Telescopio Canarias (GTC) located in La Palma Island, Spain. During the GTC integration phase, the CI will be a diagnostic tool for performance verification. The CI features four operation modes-imaging, pupil imaging, Curvature Wave-front sensing (WFS), and high resolution Shack-Hartmann WFS. The imaging mode permits to qualify the GTC image quality. The Pupil Mode permits estimate the GTC stray light. The segments figure, alignment and cophasing verifications are made with both WFS modes. In this work we describe the Commissioning Instrument and show some tests results obtained during the site acceptance process at the GTC site.

FRIDA (inFRared Imager and Dissector for the Adaptive optics system of the Gran Telescopio Canarias) has been designed as a diffraction limited instrument that will offer broad and narrow band imaging and integral field spectroscopy (IFS) capabilities with low, intermediate and high spectral resolutions to operate in the wavelength range 0.9 - 2.5 μm. The integral field unit is based on a monolithic image slicer and the imaging and IFS observing modes will use the same Rockwell 2Kx2K detector. FRIDA will be based at a Nasmyth focus of GTC, behind the AO system. The main design characteristics of FRIDA are described in this contribution. FRIDA is a collaborative project between the main GTC partners, namely, Spain, Mexico and Florida, lead by UNAM.

GUIELOA is a Curvature type Adaptive Optics system for the 2.1 m San Pedro Martir Telescope. It performs a bimorph 19 actuators deformable mirror and a 19 lens-let array for the wave-front sensor (WFS). GUIELOA corrects effectively the first 8 Zernike polynomials of the aberrated wave-front produced by the atmospheric turbulence. For the closed loop control it performs two SPARC FORCE 5 SBC computers working in concert. The lens-let array + optical fibers send the light from defocused pupil images to 19 avalanche photo-diodes. In this work it is shown how the lens-let array was manufactured at IAUNAM with CIDESI and Centro de Investigaciones en Optica (CIO).

In March 2004 was accepted in the site of Gran Telescopio Canarias (GTC) in La Palma Island, Spain, the Commissioning Instrument (CI) for the GTC. During the GTC integration phase, the CI will be a diagnostic tool for performance verification. The CI features four operation modes-imaging, pupil imaging, Curvature Wave-front sensing (WFS), and high resolution Shack-Hartmann WFS. This instrument was built by the Instituto de Astronomia UNAM in Mexico City and the Centro de Ingenieria y Desarrollo Industrial (CIDESI) in Queretaro, Qro under a GRANTECAN contract after an international public bid. Some optical components were built by Centro de Investigaciones en Optica (CIO) in Leon Gto and the biggest mechanical parts were manufactured by Vatech in Morelia Mich. In this paper we made a general description of the CI and we relate how this instrument, build under international standards, was entirely made in Mexico.