Search

The paper presents a normalized, varying step size-based least mean square-based control for a standalone microgrid and Ant Lion optimization-based maximum power point tracking. This modified version of the incremental conductance algorithm addresses issues like slow dynamic response, fixed step size issues, and steady state oscillations. Comparative analysis with well-known techniques shows that Ant Lion optimizes the tracking of maximum power points more accurately, with fewer oscillations and increased efficiency. Power management and power quality are maintained through proposed adaptive voltage source converter control. The proposed voltage control shows better performance under various dynamic and steady conditions. [ABSTRACT FROM AUTHOR]

The paper presents a grid-connected microgrid with a photovoltaic system and a battery as a storage element. The optimal design and control of storage elements and power quality improvement are enhanced using sigmoid-function-based variable step size (SFB-VSS) adaptive LMS control. The DC-link voltage and battery current are enhanced using an ILA-optimization-based PI controller. Comparative analysis shows that an ILA-optimized PI controller improves battery stress and DC-link voltage fluctuations, enhancing overall system stability. The relative percentage error of Vdc is only 0.5714% for ILA-optimized values as compared to GA, PSO, and manually tuned PI gains which are 0.857%, 1.14285%, and 0.86%, respectively. ILA-optimized parameters also enhance battery current, reducing stress on the battery. The system was studied under various dynamic conditions, achieving power balance in all conditions. The system has the capability of seamless transfer of control from GC mode to SA mode when the grid is disconnected. The proposed VSC control shows better performance in steady-state and dynamic conditions, maintaining a THD under 5%, which follows IEEE standard 519, and providing better DC offset rejection, fewer oscillations in the weight component of the load, and better convergence. The proposed control also enhances the frequency of the grid, ensuring a smooth transition between modes. The system is simulated in the MATLAB Simulink environment, and all the optimization techniques were carried out offline. [ABSTRACT FROM AUTHOR]