Search

Purpose. Maintaining balance during static standing postures requires the coordination of many neuromuscular mechanisms. The role of the intrinsic and extrinsic foot muscles in this paradigm has yet to be clearly defined. The purpose of this study was to explore foot muscle activation during static phases on common weight-bearing tasks of varying loads and balance demands. Methods. Twenty healthy young adults performed 6 standing postures (single-limb and double-limb stand, squat, and heel raise) with one foot on a force plate. Muscle activity was recorded from the abductor hallucis, flexor hallucis longus and brevis, and tibialis posterior using intramuscular electrodes; surface electrodes were used to record activity from the peroneus longus and tibialis anterior. Two-way repeated measures ANOVA (2 loading conditions × 3 postures) were run to compare muscle activation and center of pressure velocity. Results. Intrinsic foot muscle activity increased as loading and postural demand increased; however, the specific effects varied for each of the extrinsic foot muscles. Conclusions. These results suggest that the intrinsic foot muscles play an important role in maintaining static balance. Strengthening intrinsic and extrinsic foot muscles may help increase stability in people who have weak toe flexors or who suffer from a variety of foot pathologies.

Successful performance of difficult, multi-revolution jumps is a critical aspect of singles and pairs figure skating. Key determinants of quality jumps include jump height, angular momentum at takeoff (L_Body

Observational studies have found that habitually barefoot populations tend to have stronger feet, lower incidence of flat foot, and decreased lower extremity injury rates compared to traditionally ...

Background Previous research shows kinematic and kinetic coupling between the metatarsophalangeal (MTP) and midtarsal joints during gait. Studying the effects of MTP position as well as foot structure on this coupling may help determine to what extent foot coupling during dynamic and active movement is due to the windlass mechanism. This study’s purpose was to investigate the kinematic and kinetic foot coupling during controlled passive, active, and dynamic movements. Methods After arch height and flexibility were measured, participants performed four conditions: Seated Passive MTP Extension, Seated Active MTP Extension, Standing Passive MTP Extension, and Standing Active MTP Extension. Next, participants performed three heel raise conditions that manipulated the starting position of the MTP joint: Neutral, Toe Extension, and Toe Flexion. A multisegment foot model was created in Visual 3D and used to calculate ankle, midtarsal, and MTP joint kinematics and kinetics. Results Kinematic coupling (ratio of midtarsal to MTP angular displacement) was approximately six times greater in Neutral heel raises compared to Seated Passive MTP Extension, suggesting that the windlass only plays a small kinematic role in dynamic tasks. As the starting position of the MTP joint became increasingly extended during heel raises, the amount of negative work at the MTP joint and positive work at the midtarsal joint increased proportionally, while distal-to-hindfoot work remained unchanged. Correlations suggest that there is not a strong relationship between static arch height/flexibility and kinematic foot coupling. Conclusions Our results show that there is kinematic and kinetic coupling within the distal foot, but this coupling is attributed only in small measure to the windlass mechanism. Additional sources of coupling include foot muscles and elastic energy storage and return within ligaments and tendons. Furthermore, our results suggest that the plantar aponeurosis does not function as a rigid cable but likely has extensibility that affects the effectiveness of the windlass mechanism. Arch structure did not affect foot coupling, suggesting that static arch height or arch flexibility alone may not be adequate predictors of dynamic foot function.

Healthcare workers have a high rate of low back injury due to patient handling tasks. These workers receive training in patient handling methods such as adjusting bed height, but often ignore them. In this study, 35 healthcare workers completed patient boosts at a self-chosen bed height and again with the bed in a higher standardised position. Motion capture and force data were collected for analysis. Given the choice, less than half of participants adjusted the bed at all and none of them moved the bed to the highest position (99.1 cm). The self-chosen bed position yielded significantly higher low back force than the higher position at L4-L5 and L5-S1 (

Objectives Foot and leg muscle strength and size are crucial to proper function. It is important to assess these characteristics reliably. Our primary objective was to compare the measurement of still images to cine loops. The secondary purpose was to determine interoperator and intraoperator reliability between operators of different experience levels using video clips and internal and external landmarks. Methods Twelve healthy volunteers participated in our study. Internal (navicular tuberosity) and external (lateral leg length at 30% and 50% from the knee joint line) landmarks were used. Two operators each captured and later measured still and cine loop images of selected foot and leg muscles. Results The 12 participants included 8 male and 4 female volunteers (mean age ± SD, 23.5 ± 1.9 years). Good to excellent intraoperator and interoperator reliability was seen (intraclass correlation coefficient range of 0.946-0.998). The use of cine loops improved the intraclass correlation coefficients for both intraoperator and interoperator reliability (0.5%-4% increases). The use of cine loops decreased the intraoperator standard error of the measurement and limits of agreement of the novice operator (decreases of 45%-73% and 24%-51%, respectively), and these became comparable to those of experienced operators using still images. The interoperator standard errors of the measurement dropped by 42% to 53%, whereas the limits of agreement dropped by 27% to 40%. No substantial changes were noted in the tibialis anterior across reliability metrics. Conclusions Improved protocols that take advantage of using internal bony landmarks and cine loops during both the image-gathering and measurement processes improve the reliability of research examining muscle size changes in the lower leg or foot associated with muscle changes due to exercise, injury, disuse, or disease.

Minimal footwear has existed for tens of thousands of years and was originally designed to protect the sole of the foot. Over the past 50 yr, most footwear has become increasingly more cushioned and supportive. Here, we review evidence that minimal shoes are a better match to our feet, which may result in a lower risk of musculoskeletal injury.

Background Blood flow is essential in maintaining tissue health. Thus, compromised blood flow can prevent tissue healing. An adducted hallux, as seen inside a narrow shoe, may put passive tension on the abductor hallucis, compressing the lateral plantar artery into the calcaneus and restricting blood flow. The purposes of this study were to compare lateral plantar artery blood flow before and after passive hallux adduction and to compare blood flow with arch height. Methods Forty-five healthy volunteers (20 female, 25 male; age = 24.8 ± 6.8 yr; height = 1.7 ± 0.1 m; weight = 73.4 ± 13.5 kg) participated in this cross-over design study. Arch height index (AHI) was calculated, and blood flow measurements were obtained using ultrasound (L8-18i transducer, GE Logiq S8). The lateral plantar artery was imaged deep to abductor hallucis for 120 s: 60 s at rest, then 60 s of passive hallux adduction. Maximal passive hallux adduction was performed by applying pressure to the medial side of the hallux. Blood flow was calculated in mL/min, and pre-passive hallux adduction was compared to blood flow during passive hallux adduction. Results Log transformed data was used to run a paired t-test between the preadduction and postadduction blood flow. The volume of blood flow was 22.2% lower after passive hallux adduction compared to before (− 0.250 ± 0.063, p Conclusions Our preliminary findings of decreased blood flow through passive hallux adduction indicate conditions that elicit passive hallux adduction (e.g. wearing narrow-toed shoes) may have important effects on foot blood flow. Individuals with lower AHI appear to have a greater risk of decreased blood flow with passive hallux adduction.

Weakness of foot muscles may contribute to a variety of loading-related injuries. Supportive footwear may contribute to intrinsic foot muscle weakness by reducing the muscles' role in locomotion (e.g., absorbing forces and controlling motion). Increased stimulus to the foot muscles can be provided through a variety of mechanisms, including minimalist footwear and directed exercise.To determine the effect of walking in minimalist footwear or performing foot strengthening exercises on foot muscle size and strength.Fifty-seven runners were randomly assigned to one of three groups-minimalist shoe walking (MSW), foot strengthening (FS) exercise, or control (C). All groups maintained their prestudy running mileage throughout the study. The MSW group walked in provided footwear, increasing weekly the number of steps per day taken in the shoes. The FS group performed a set of progressive resistance exercises at least 5 d·wk. Foot muscle strength (via custom dynamometers) and size (via ultrasound) were measured at the beginning (week 0), middle (week 4), and end (week 8) of the study. Mixed model ANOVA were run to determine if the interventions had differing effects on the groups.There were significant group-time interactions for all muscle size and strength measurements. All muscle sizes and strength increased significantly from weeks 0 to 8 in the FS and MSW groups, whereas there were no changes in the C group. Some muscles increased in size by week 4 in the FS and MSW groups.Minimalist shoe walking is as effective as foot strengthening exercises in increasing foot muscle size and strength. The convenience of changing footwear rather than performing specific exercises may result in greater compliance.

Competitive figure skaters often suffer from overuse injuries, which may be due to the high impact forces endured during jump repetitions performed in practice and competition. However, to date, forces during on-ice figure skating have not been quantified due to technological limitations. The purpose of this study was to determine the optimal calibration procedure for a previously developed instrumented figure skating blade (IceSense). Initial calibration was performed by collecting data from the blade while 11 skaters performed off-ice jumps, landing on a force plate in the lab. However, mean peak force measurements from the blade were greater than the desired error threshold of &plusmn, 10%. Therefore, we designed a series of controlled experiments which included measuring forces from a load cell rigidly attached to the top of the blade concurrently with strain data from the strain gauges on the blade. Forces were applied to the blade by adding weight to a drop tower or by manually applying force in a quasi-static manner. Both methods showed similar accuracy, though using the drop tower allowed precise standardization. Therefore, calibration was performed using the weighted drop method. This calibration was applied to strain gauge data from out-of-sample drop trials, resulting in acceptable estimates of peak force (less than 10% error). Using this calibration, we collected data on one figure skater and present results from an exemplar on-ice double flip jump. Using the IceSense device to quantify on-ice forces in a research setting may help inform training, technique, and equipment design.

Background The leg muscles are important for balance, posture, and movement during static and dynamic activity. Obtaining cross-sectional area measurements (CSA) of the leg muscles helps researchers understand the health and force production capability of individual leg muscles. Therefore, having an easy to use and readily available method to assess leg muscle CSA is needed. Thus, the purpose of this study was to compare the magnitude, repeatability, and validity of CSA measurements of select leg muscles from ultrasound (US) and the current gold standard, magnetic resonance imaging (MRI). Methods 20 healthy volunteers participated in this study. Each participant was imaged via US and MRI. The muscles of interest obtained on each participant consisted of the tibialis anterior at both 30 and 50% of the shank length, tibialis posterior at both 30 and 50% of the shank length, the flexor digitorum longus, the fibularis (peroneus) longus, and the fibularis (peroneus) brevis. Results Strong Pearson correlations were seen for all of the muscles when comparing US to MRI with a range from .7840 to .9676. For all measurements, standard error of the measurement ranged from .003 to 0.260 cm2. Minimum detectable difference for muscle measurements ranged from .008 cm2 for MRI fibularis longus and fibularis brevis to .693 cm2 for MRI of tibialis anterior at 30%. US minimum detectable difference ranged from .125 cm2 for the tibialis posterior muscle at 30% to .449 cm2 for the tibialis anterior muscle at 50%. Conclusions Based on these results ultrasound is a valid method to obtain CSA of muscles of the leg when compared with MRI.

Background. Tracking progression of diabetic peripheral polyneuropathy (DPN) is usually focused on sensory nerves and subjective testing methods. Recent studies have suggested that distal muscle atrophy may precede sensation loss. Methods to objectively measure distal muscle size and strength are needed to help understand how neuropathy affects muscle function. Purpose. To evaluate individual intrinsic and extrinsic foot muscle sizes and functional foot strength in participants with DPN. Methods. Thirty individuals participated in this cross-sectional study (15 DPN and 15 matched controls). Sizes of 10 separate muscles of the lower leg and foot were measured using ultrasound imaging. Functional foot strength was also quantified using custom great toe and lateral toe flexion tests along with a doming test. Muscle size and strength metrics were compared between groups using ANOVAs and paired t-tests (α=0.05). Correlations between strength and relevant muscle sizes were also evaluated. Results. The sizes of all four intrinsic foot muscles were smaller in individuals with DPN (p≤0.03), while only one (toe extensor) of the six extrinsic muscles was smaller (p<0.01). Great toe flexion (p=0.03) and lateral toe flexion (p<0.01) strengths were decreased between groups and showed moderate to strong correlations (0.43≤r≤0.80) with several corresponding intrinsic muscle sizes. The doming strength test did not show any difference between groups and was moderately correlated with one muscle size (r=0.59). Conclusion. Diabetic peripheral polyneuropathy affects intrinsic muscles before extrinsics. Ultrasound imaging of individual muscles and functional toe flexion tests can be used clinically to monitor DPN progression and foot function. Participants need to be trained in the doming test before a relationship can be established between this test and DPN foot function. Future studies should include muscle quality measurements to better understand characteristics of affected muscles.

Background Evaluating the strength of the small muscles of the foot may be useful in a variety of clinical applications but is challenging from a methodology standpoint. Previous efforts have focused primarily on the functional movement of toe flexion, but clear methodology guidelines are lacking. A novel foot doming test has also been proposed, but not fully evaluated. The purposes of the present study were to assess the repeatability and comparability of several functional foot strength assessment techniques. Methods Forty healthy volunteers were evaluated across two testing days, with a two-week doming motion practice period between them. Seven different measurements were taken using a custom toe flexion dynamometer (seated), custom doming dynamometer (standing), and a pressure mat (standing). Measurements from the doming dynamometer were evaluated for reliability (ICCs) and a learning effect (paired t-tests), while measurements from the toe flexion dynamometer and pressure mat were evaluated for reliability and comparability (correlations). Electromyography was also used to descriptively assess the extent of muscle isolation in all measurements. Results Doming showed excellent within-session reliability (ICCs > 0.944), but a clear learning effect was present, with strength (p 0.945). Seated toe flexion tests using the dynamometer were moderately correlated to standing toe flexion tests on a pressure mat (r > 0.54); however, there were some differences in muscle activity. The former may better isolate the toe flexors, while the latter appeared to be more functional for many pathologies. On the pressure mat, reciprocal motion appeared to display slightly greater forces and reliability than isolated toe flexion. Conclusions This study further refines potential methodology for foot strength testing. These devices and protocols can be duplicated in the clinic to evaluate and monitor rehabilitation progress in clinical populations associated with foot muscle weakness.

Background. Neuropathic complications from diabetes mellitus affect multiple nerve types and may manifest in gait. However, gait compensations are still poorly understood, as narrow analyses and lack of speed controls have contributed to conflicting or equivocal results. Purpose. To evaluate gait mechanics and energetics in diabetic peripheral polyneuropathy. Methods. Instrumented gait analysis was performed on 14 participants with diabetic peripheral polyneuropathy and 14 matched controls, walking at 1.0 m/s. A full-body model with a multisegment foot was used to calculate inverse dynamics and analyze sagittal plane metrics and time series waveforms across stance phase. Results. Alterations included increased hip and knee flexion in early stance followed by a prolonged hip extension moment in midstance. Late stance ankle dorsiflexion and power absorption were increased, and final push-off was delayed and truncated. Conclusion. A neuropathic diabetic gait shares important similarities to a mild crouch gait with weakness/dysfunction in the foot and ankle. This study highlights two main compensation mechanisms that have been overlooked in previous literature. First, increased triceps surae stretch in terminal stance may be used to increase proprioception and/or energy storage, while a prolonged hip extension moment in midstance compensates for a limited push-off. These result in an overall workload shift from distal to proximal joints. Clinical assessment, monitoring, and treatment of neuropathy may benefit by focusing on these specific functional alterations.

Regular exercise protects against degenerative joint disorders, yet the mechanisms that underlie these benefits are poorly understood. Chronic, low-grade inflammation is widely implicated in the onset and progression of degenerative joint disease.To examine the effect of running on knee intra-articular and circulating markers of inflammation and cartilage turnover in healthy men and women.Six recreational runners completed a running (30 min) and control (unloaded for 30 min) session in a counterbalanced order. Synovial fluid (SF) and serum samples were taken before and after each session. Cytokine concentration was measured in SF and serum using a multiplexed cytokine magnetic bead array. Ground reaction forces were measured during the run.There were no changes in serum or SF cytokine concentration in the control condition. The cytokine GM-CSF decreased from 10.7 ± 9.8 to 6.2 ± 5.9 pg/ml pre- to post-run (p = 0.03). IL-15 showed a trend for decreasing concentration pre- (6.7 ± 7.5 pg/ml) to post-run (4.3 ± 2.7 pg/ml) (p = 0.06). Changes in IL-15 concentration negatively correlated with the mean number of foot strikes during the run (rRunning appears to decrease knee intra-articular pro-inflammatory cytokine concentration and facilitates the movement of COMP from the joint space to the serum.

Advancements in wearable technology have facilitated performance monitoring in a number of sports. Figure skating may also benefit from this technology, but the inherent movements present some unique challenges. The purpose of this study was to evaluate the feasibility of using an inertial measurement unit (IMU) to monitor three aspects of figure skating jumping performance: jump count, jump height, and rotation speed. Seven competitive figure skaters, outfitted with a waist-mounted IMU, performed a total of 59 isolated multi-revolution jumps and their competition routines, which consisted of 41 multi-revolution jumps along with spins, footwork, and other skills. The isolated jumps were used to develop a jump identification algorithm, which was tested on the competition routines. Four algorithms to estimate jump height from flight time were then evaluated using calibrated video as a gold standard. The identification algorithm counted 39 of the 41 program jumps correctly, with one false positive. Flight time and jump height errors under 7% and 15% respectively were found using a peak-to-peak scaling algorithm. Rotation speeds up to 1,500°/s were noted, with peak speeds occurring just over halfway between takeoff and landing. Overall, jump monitoring via IMUs may be an efficient aid for figure skaters training multi-revolution jumps.

Category: Other Introduction/Purpose: The intrinsic muscles of the arch have been classified as the core of the foot. Intrinsic foot muscles (IFM) work as local stabilizers and extrinsic foot muscles (EFM) work as global movers to help control the pronation of the foot. These muscles prevent excessive strain of the MLA. Previous research has shown that strengthening IFM may reduce pain and improve function in people with plantar fasciitis. Additionally, habitual use of minimal shoes that lack support of the arch require greater demand on the intrinsic muscles. The purpose of this study was to determine the effectiveness of two different strengthening interventions on IFM and EFM size and strength. Methods: 57 healthy runners (avg 15-30 mpw) were randomly assigned to a foot strengthening (FS, n=19), a minimal shoe walking (MSW, n=19), or a control group (C, n=19). Baseline cross-sectional areas of abductor hallucis, quadratus plantae, flexor digitorum brevis, and flexor digitorum longus, and thickness of the flexor hallucis brevis, tibialis posterior, and tibialis anterior were obtained with ultrasound using a 10 MHz linear probe. Doming, great toe flexion and lateral toes flexion strength were also measured using a custom-built dynamometer. The FS group then underwent an 8 wk foot and ankle strengthening program. The MSW group progressively walked in minimal footwear from 2,500-7,000 over the course of 8 wks. All groups, including C, maintained normal running mileage in conventional footwear throughout the 8 wks. Size and strength measures were then repeated. A repeated measures ANCOVA with a post-hoc test was used to determine differences in size and strength between groups. Results: All muscles measured in the FS and MSW groups increased significantly in size from weeks 0-8. There were no changes in muscle size in the C group. The FS group experienced significantly greater size changes for the flexor hallucis brevis than the MSW group. All other changes in muscle size were not significant between the FS and MSW groups. The FS and MSW groups showed significant increases in strength in all 3 tests from week 0-8. Strength of the control group did not change at any time. The increases in strength in the FS and MSW groups were not significantly different than each other. Conclusion: Exercises that target the intrinsic and extrinsic foot muscles are effective in increased strength and size of the muscles. However, similar increases in strength and size can be obtained by progressive walking in minimal footwear. Combining both these approaches may have an even greater effect. Stronger feet may offer greater protection against overuse injuries such as plantar fasciitis.

PURPOSE The midfoot is instrumental to foot function; however, quantifying its roles in human movement has been difficult. A forceful dynamic activity like landing may help elucidate the midfoot's contribution to foot energetics and function. The main purpose of this study was to measure midtarsal joint kinematics and kinetics during a barefoot single-leg landing task. A secondary aim of this study was to explore the relationship between static foot posture and dynamic midfoot function. METHODS In a cross-sectional study design, 48 females (age = 20.4 ± 1.8 yr, body mass index = 21.6 ± 1.7 kg·m) performed drop landings from a height of 0.4 m onto split force platforms. Subjects hung from wooden rings and landed on their dominant leg. Midtarsal joint kinematic and kinetic data were recorded using a 14-camera optical motion capture system in conjunction with two in-ground force platforms and a custom kinetic three-segment foot model. Foot structure was measuring using the arch height index (AHI) and the static midtarsal joint angle from motion capture. RESULTS Kinematic data revealed an average sagittal plane midtarsal joint range of motion of 27° through the landing phase. Kinetic data showed that between 7% and 22% of the total lower extremity joint, work during the landing was performed by the midtarsal joint. Both standing AHI and static midtarsal joint angle (static MA) were correlated with sagittal plane midtarsal joint range of motion (standing AHI: r = -0.320, P = 0.026; static MA: r = 0.483, P < 0.001) and with midtarsal joint work (standing AHI: r = 0.332, P = 0.021; static MA: r = -0.323, P = 0.025). CONCLUSION The midfoot contributes substantially to landing mechanics during a barefoot single-leg landing task. Static foot posture measures have limited value in predicting midfoot kinematics and kinetics during sportlike landings.

As the main point of contact with the ground, the foot plays a vital role in how humans move. During standing, our feet support and control our balance. During movements such as walking and running...

Background Quantifying the strength of the intrinsic foot muscles has been a challenge for clinicians and researchers. The reliable measurement of this strength is important in order to assess weakness, which may contribute to a variety of functional issues in the foot and lower leg, including plantar fasciitis and hallux valgus. This study reports 3 novel methods for measuring foot strength – doming (previously unmeasured), hallux flexion, and flexion of the lesser toes. Methods Twenty-one healthy volunteers performed the strength tests during two testing sessions which occurred one to five days apart. Each participant performed each series of strength tests (doming, hallux flexion, and lesser toe flexion) four times during the first testing session (twice with each of two raters) and two times during the second testing session (once with each rater). Intra-class correlation coefficients were calculated to test for reliability for the following comparisons: between raters during the same testing session on the same day (inter-rater, intra-day, intra-session), between raters on different days (inter-rater, inter-day, inter-session), between days for the same rater (intra-rater, inter-day, inter-session), and between sessions on the same day by the same rater (intra-rater, intra-day, inter-session). Results ICCs showed good to excellent reliability for all tests between days, raters, and sessions. Average doming strength was 99.96 ± 47.04 N. Average hallux flexion strength was 65.66 ± 24.5 N. Average lateral toe flexion was 50.96 ± 22.54 N. Conclusions These simple tests using relatively low cost equipment can be used for research or clinical purposes. If repeated testing will be conducted on the same participant, it is suggested that the same researcher or clinician perform the testing each time for optimal reliability.

A proposed benefit of minimalist shoe running is an increase in intrinsic foot muscle strength. This study examined change in intrinsic foot muscle size in runners transitioning to Vibram FiveFingers™ minimalist shoes compared to a control group running in traditional running shoes. We compare pre-transition size between runners who developed bone marrow edema to those who did not. 37 runners were randomly assigned to the Vibram FiveFingers™ group (n=18) or control group (n=19). Runners' bone marrow edema and intrinsic foot muscle size were measured at baseline and after 10 weeks. Total running volume was maintained by all runners. A significant increase in abductor hallucis cross-sectional area of 10.6% occurred in the Vibram FiveFingers™ group compared to the control group (p=0.01). There was no significant change in any of the other muscles examined (p>0.05). 8 of the Vibram FiveFingers™ runners, and 1 control runner developed bone marrow edema. Those who developed bone marrow edema, primarily women, had significantly smaller size in all assessed muscles (p≤0.05). Size of intrinsic foot muscles appears to be important in safely transitioning to minimalist shoe running. Perhaps intrinsic foot muscle strengthening may benefit runners wanting to transition to minimalist shoes.

The purpose of this study was to examine the effect of minimalist running shoes on oxygen uptake during running before and after a 10-week transition from traditional to minimalist running shoes. Twenty-five recreational runners (no previous experience in minimalist running shoes) participated in submaximal VO2 testing at a self-selected pace while wearing traditional and minimalist running shoes. Ten of the 25 runners gradually transitioned to minimalist running shoes over 10 weeks (experimental group), while the other 15 maintained their typical training regimen (control group). All participants repeated submaximal VO2 testing at the end of 10 weeks. Testing included a 3 minute warm-up, 3 minutes of running in the first pair of shoes, and 3 minutes of running in the second pair of shoes. Shoe order was randomized. Average oxygen uptake was calculated during the last minute of running in each condition. The average change from pre- to post-training for the control group during testing in traditional and minimalist shoes was an improvement of 3.1 ± 15.2% and 2.8 ± 16.2%, respectively. The average change from pre- to post-training for the experimental group during testing in traditional and minimalist shoes was an improvement of 8.4 ± 7.2% and 10.4 ± 6.9%, respectively. Data were analyzed using a 2-way repeated measures ANOVA. There were no significant interaction effects, but the overall improvement in running economy across time (6.15%) was significant (p = 0.015). Running in minimalist running shoes improves running economy in experienced, traditionally shod runners, but not significantly more than when running in traditional running shoes. Improvement in running economy in both groups, regardless of shoe type, may have been due to compliance with training over the 10-week study period and/or familiarity with testing procedures.

Objective The purpose of this study was to evaluate the validity and reliability of standing posture assessments in asymptomatic men using the PostureScreen Mobile (PSM) iOS application. Methods The standing posture of 50 asymptomatic male participants (24.04 ± 1.81 years) was measured during 3 trials on the same day. The following 10 measurements using the PSM app were compared to the criterion VICON 3-dimensional analysis: from the frontal plane, shift and tilt of the head, shoulders, and hips; and from the sagittal plane, shift of the head, shoulders, hips, and knees. We used Bayesian methods to analyze the data. Results Compared with the VICON measurements, PSM assessments of head tilt, shoulder tilt and shift, and hip tilt and shift in the frontal plane were biased. In the sagittal plane, PSM measurements of shoulder, hip, and knee shift were biased. Only head shift in the frontal and sagittal planes were comparable between the VICON and the PSM. The VICON and PSM had similar intraclass correlations in 6 of 10 measurements. The PSM assessments of head shift and tilt and shoulder tilt in the sagittal plane were significantly less reliable than with VICON. Conclusion The use of the PSM app introduced significant bias in postural measurements in the frontal and sagittal plane. Until further research reports additional validity and reliability data of the PSM app, we suggest caution in the use of PSM app when highly accurate postural assessments are necessary.

Accurate automated event detection is important in increasing the efficiency and utility of instrumented gait analysis. Published automated event detection algorithms, however, have had limited testing on pathological populations, particularly those where force measurements are not available or reliable. In this study we first postulated robust definitions of gait events that were subsequently used to compare kinematic based event detection algorithms across difficult pathologies. We hypothesized that algorithm accuracy would vary by gait pattern, and that accurate event detection could be accomplished by first visually classifying the gait pattern, and subsequently choosing the most appropriate algorithm. Nine published kinematic event detection algorithms were applied to an existing instrumented pediatric gait database (primarily cerebral palsy pathologies), that were categorized into 4 visually distinct gait patterns. More than 750 total events were manually rated and these events were used as a gold standard for comparison to each algorithm. Results suggested that for foot strike events, algorithm choice was dependent on whether the foot's motion in terminal swing was more horizontal or vertical. For horizontal foot motion in swing, algorithms that used horizontal position, resultant sagittal plane velocity, or horizontal acceleration signals were most robust; while for vertical foot motion, resultant sagittal velocity or vertical acceleration excelled. For toe off events, horizontal position or resultant sagittal plane velocity performed the best across all groups. We also tuned the resultant sagittal plane velocity signal to walking speed to create an algorithm that can be used for all groups and in real time.

In populations where walking and/or stopping can be difficult, such as in children with cerebral palsy, the ability to quickly stop walking may be beyond the child's capabilities. Gait termination may be improved with physical therapy. However, without a greater understanding of the mechanical requirements of this skill, treatment planning is difficult. The purpose of this study was to understand how healthy children successfully terminate gait in one step when walking quickly, which can be challenging even for healthy children. Lower extremity kinematic and kinetic data were collected from 15 youth as they performed walking, planned, and unplanned stopping tasks. Each stopping task was performed as the subject walked at his/her preferred speed and a fast speed. The most significant changes in mechanics between speed conditions (preferred and fast) of the same stopping task were greater knee flexion angles (unplanned: +16.49±0.54°, p=0.00; planned: +15.75±1.1°, p=0.00) and knee extension moments (unplanned: +0.67±0.02N/kgm, p=0.00; planned: +0.57±0.23N/kgm, p=0.00) at faster speeds. The extra range of motion in the joints and extra muscle strength required to maintain the stopping position suggests that stretching and strengthening the muscles surrounding the joints of the lower extremity, particularly the knee, may be a useful intervention.

Category: Other Introduction/Purpose: The arch has been referred to as the core of the foot. The arch’s structure, movement, and integrity during running gait largely depends on the function of intrinsic and extrinsic foot muscles. There are many injuries that can be associated with a dysfunctional medial longitudinal arch. Improving the strength of the foot muscles could help improve arch function during running. The purpose of this study was to compare changes in arch deformation after eight weeks in a foot strengthening exercise group (FS), a group walking in minimalist shoes (MSW), and a control group (C). Methods: 24 healthy runners (average of 15-30 miles/week, no experience with minimalist footwear) were randomly assigned to FS (n=9), MSW (n=7) or C (n=8). FS subjects followed a series of progressive exercises designed to strengthen the intrinsic and extrinsic foot muscles. MSW subjects walked in minimal footwear, increasing from 2,500 to 7,000 steps/day over an 8 wk period. All runners maintained their pre-study mileage in conventional running shoes throughout the 8-week study Three-dimensional motion analysis data was collected at the beginning of the study and after week 8. Passive-reflective markers were placed according to the Oxford Foot Model. Subjects ran at a self-selected pace on a treadmill while data were collected for at least 10 strides. Peak midfoot angles were extracted and averaged within each trial. Group means at week 0 and week 8 were compared using paired t-tests with alpha set at 0.05. Results: While all groups experienced a decrease in midfoot angle, only the FS group experienced a significant change (see table). These results suggest that the foot exercise intervention resulted in more arch control during running than the progressive walking in minimal shoes. Greater changes may have been found if the subjects progressively ran in the minimal shoes which would have placed greater demands on the arch musculature. Conclusion: Based on these data, it seems possible for patients to reduce the amount of arch deformation during running by using targeted foot exercises. This could help with patients who have overuse injuries associated with increased arch deformation. These results also suggest that foot strengthening may be an effective way to prepare for minimal footwear running.

Because serum cartilage oligomeric matrix protein (COMP) has been used to reflect articular cartilage condition, we aimed to identify walking and running mechanics that are associated with changes in serum COMP. Eighteen subjects (9 male, 9 female; age=23 ± 2 yrs.; mass=68.3 ± 9.6 kg; height=1.70 ± 0.08 m) completed 4000 steps on an instrumented treadmill on three separate days. Each day corresponded to a different ambulation speed: slow (preferred walking speed), medium (+50% of slow), and fast (+100% of slow). Synchronized ground reaction force and video data were collected to evaluate walking mechanics. Blood samples were collected pre-, post-, 30-minute post-, and 60-minute post-ambulation to determine serum COMP concentration at these times. Serum COMP increased 29%, 18%, and 5% immediately post ambulation for the fast, medium, and slow sessions (p