Search

The quest for eco-friendly materials with anticipated positive impact for sustainability is crucial to achieve the UN sustainable development goals. Classical strategies of composite materials can be applied on novel nanomaterials and green materials. Besides the actual technology and applications also processing and manufacturing methods should be further advanced to make entire technology concepts sustainable. Here, they show an efficient way to combine two low-cost materials, cellulose and zinc oxide (ZnO), to achieve novel functional and "green" materials via paper-making processes. While cellulose is the most abundant and cost-effective organic material extractable from nature. ZnO is cheap and known of its photocatalytic, antibacterial, and UV absorption properties. ZnO nanowires are grown directly onto cellulose fibers in water solutions and then dewatered in a process mimicking existing steps of large-scale papermaking technology. The ZnO NW paper exhibits excellent photo-conducting properties under simulated sunlight with good ON/OFF switching and long-term stability (90 minutes). It also acts as an efficient photocatalyst for hydrogen peroxide (H2O2) generation (5.7 x 10(-9) m s(-1)) with an envision the possibility of using it in buildings to enable large surfaces to spontaneously produce H2O2 at its outer surface. Such technology promise for fast degradation of microorganisms to suppress the spreading of diseases., Funding Agencies|Knut and Alice Wallenberg Foundation; VINNOVA (Digital Cellulose Center); Vetenskapradet [2016-05990]; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoeping University [2009-00971]; aForsk Foundation [17-433]

Certain bird species have evolved spectacular colors that arise from organized nanostructures of melanin. Its high refractive index (similar to 1.8) and broadband absorptive properties enable vivid structural colors that are nonsusceptible to photo-bleaching. Mimicking natural melanin structural coloration could enable several important applications, in particular, for non-iridescent systems with colors that are independent of incidence angle. Here, we address this by forming melanin photonic crystal microdomes by inkjet printing. Owing to their curved nature, the microdomes exhibit noniridescent vivid structural coloration, tunable throughout the visible range via the size of the nanoparticles. Large-area arrays (>1 cm(2)) of high-quality photonic microdomes could be printed on both rigid and flexible substrates. Combined with scalable fabrication and the nontoxicity of melanin, the presented photonic microdomes with noniridescent structural coloration may find use in a variety of applications, including sensing, displays, and anticounterfeit holograms., Funding Agencies|Wenner-Gren Foundation; Swedish Research CouncilSwedish Research Council; Knut and Alice Wallenberg foundationKnut & Alice Wallenberg Foundation; Swedish Foundation for Strategic researchSwedish Foundation for Strategic Research; Linkoping University; Wallenberg Wood Science Center the Wallenberg Wood Science Centre; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Materials that provide independent control of infrared thermal radiation and haze in the visible could benefit many areas and applications, including clothing, packaging and photovoltaics. Here, we study this possibility for a metamaterial composite paper based on cellulose nanofibrils (CNF) and silicon dioxide (SiO2) microparticles with infrared (IR) Frohlich phonon resonances. This CNF-SiO2 composite shows outstanding transparency in the visible wavelength range, with the option of controlling light diffusion and haze from almost zero to 90% by varying the SiO2 microparticle concentration. We further show that the transparent metamaterial paper could maintain high thermal emissivity in the atmospheric IR window, as attributed to strong IR absorption of both the nanocellulose and the resonant SiO2 microparticles. The high IR emissivity and low visible absorption make the paper suitable for passive radiative cooling and we demonstrate cooling of the paper to around 3 degrees C below ambient air temperature by exposing it to the sky., Funding Agencies|Knut and Allice Wallenberg Foundation via a Wallenberg Scholarship; Knut and Alice Wallenberg foundationKnut & Alice Wallenberg Foundation; Linkoping University; Wallenberg Wood Science Center; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]; Swedish Foundation for Strategic ResearchSwedish Foundation for Strategic Research; Swedish Armed Forces Research and Technology programme

Chemically synthesized zigzag-edged nanographenes (NG) have recently demonstrated great success as the active laser units in solution-processed organic distributed feedback (DFB) lasers. Here, we report the first observation of dual amplified spontaneous emission (ASE) from a large-size NG derivative (with 12 benzenoid rings) dispersed in a polystyrene film. ASE is observed simultaneously at the 685 and 739 nm wavelengths, which correspond to different transitions of the photoluminescence spectrum. Ultrafast pump-probe spectroscopy has been used to ascertain the underlying photophysical processes taking place in the films. DFB lasers, based on these materials and top-layer nanostructured polymeric resonators (i.e., one or two-dimensional surface relief gratings), have been fabricated and characterized. Lasers emitting close to either one of the two possible ASE wavelengths, or simultaneously at both of them, have been prepared by proper selection of the resonator parameters.

Structural color generation by plasmonic and other means has attracted significant interest as a solution to avoid inks based on dyes. Prominent advantages include better robustness compared with organic dyes while also providing high chromaticity and brightness in ultrathin films. However, lack of cheap and scalable fabrication techniques has so far limited structural coloration to only a few applications and functional devices. Here, we demonstrate reflective (plasmonic) structural coloration at high resolution by inkjet printing on non-patterned surfaces. The method is flexible, scalable to large areas, and avoids complicated or costly fabrication steps. Optical microcavities on flexible plastic substrates were made starting with an inkjet-printed silver film as a bottom mirror. Inkjet-printed organic dielectric micropixels then served as the spacer layer, resulting in optical microcavities with reflective structural colors after coating with a thin semi-transparent metallic top layer. Optimization of ink formulation allowed for uniform pixels with minimum coffee stain effects as well as control of spacer thickness (around 50-150 nm) and color by varying the solid content of the ink. We investigate the possibility to obtain red, green and blue (RGB) pixels and demonstrate the improvement of particularly the blue coloration using wavelength-dependent plasmon absorption of gold nanoislands as a top mirror. Inkjet printing of optical microcavities and plasmonic cavities may find use in various applications, such as reflective displays in color., Funding Agencies|Swedish Foundation for Strategic Research; AForsk Foundation; Wenner-Gren Foundations; Swedish Research Council; Royal Swedish Academy of Sciences; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping University (Faculty Grant SFO-Mat-LiU) [2009 00971]

Plasmons and excitons can interact to form new hybridized light–matter states, with a multitude of potential applications including optical logic circuits and single-photon switches. Here, we report the first observation of strong coupling based on optically thin plasmonic nanohole films. The absorptive plasmon resonances of these nanohole films lead to suppressed transmission and Fano-shaped extinction peaks. We prepared silver nanohole films by colloidal lithography, which enables large-scale fabrication of nanoholes distributed in a short-range order. When coated with J-aggregate molecules, both extinction and absorption spectra show clear formation of two separated polariton resonances, with vacuum Rabi splitting on the order of 300 meV determined from anticrossing experiments. In accordance with strong coupling theory, the splitting magnitude increases linearly with the square root of molecular concentration. The extinction peak positions are blue-shifted from the absorption polariton positions, as explained by additional Fano interference between the hybridized states and the metal film. This highlights that absorption measurements are important not only to prove strong coupling but also to correctly determine hybridized polariton positions and splitting magnitudes in hybrid plasmonic nanohole systems. The polariton absorption peaks also show strong dependence on illumination direction, as found related to inherent directionality of the plasmonic nanohole metasurface and differences in light interaction with nonhybridized molecules. Importantly, optical simulations could successfully reproduce the experimental results and all coupling features. Furthermore, simulated spatial distribution of the absorption provides additional evidence of strong coupling in the hybrid nanohole system. The work paves the way toward strong coupling applications based on optically thin nanohole systems, as further promoted by the scalable fabrication., Funding agencies: Wenner-Gren Foundations; Swedish Research Council; Swedish Foundation for Strategic Research; AForsk Foundation; Royal Swedish Academy of Sciences; Swedish Government Strategic Research Area in Materials Science on Functional Materials at Linkoping Univer

The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) is well known for its electrochromic properties in the visible region. Less focus has been devoted to the infrared (IR) wavelength range, although tunable IR properties could enable a wide range of novel applications. As an example, modern day vehicles have thermal cameras to identify pedestrians and animals in total darkness, but road and speed signs cannot be easily visualized by these imaging systems. IR electrochromism could enable a new generation of dynamic road signs that are compatible with thermal imaging, while simultaneously providing contrast also in the visible region. Here, we present the first metal-free flexible IR electrochromic devices, based on PEDOT:Tosylate as both the electrochromic material and electrodes. Lateral electrochromic devices enabled a detailed investigation of the IR electrochromism of thin PEDOT:Tosylate films, revealing large changes in their thermal signature, with effective temperature changes up to 10 [degree]C between the oxidized (1.5 V) and reduced (-1.5 V) states of the polymer. Larger scale (7 [times] 7 cm) vertical electrochromic devices demonstrate practical suitability and showed effective temperature changes of approximately 7 [degree]C, with good optical memory and fast switching (1.9 s from the oxidized state to the reduced state and 3.3 s for the reversed switching). The results are highly encouraging for using PEDOT:Tosylate for IR electrochromic applications., Funding agencies: Wenner-Gren Foundations; Swedish Research Council; Swedish Foundation for Strategic Research; AForsk Foundation; Knut and Alice Wallenberg Foundation (Tail of the sun), Vinnova as part of the Swedish national innovation program SIO Graphene; Swedish Gover