Search

Background and purpose: This study aimed to investigate the intrafractional movement of the spinal cord and spinal canal during MR-guided online adaptive radiotherapy (MRgART) for kidney cancer. Materials and methods: All patients who received stereotactic MRgART for kidney cancer between February 2022 and February 2024 were included in this study. Patients received 30–42 Gy in 3-fraction MRgART for kidney cancer using the Elekta Unity, which is equipped with a linear accelerator and a 1.5 Tesla MRI. MRI scans were performed at three points during each fraction: for online planning, position verification, and posttreatment assessment. The spinal cord was contoured from the upper edge of Th12 to the medullary cone, and the spinal canal was contoured from Th12 to L3, using the first MRI. These contours were adjusted to the second and third MR images via deformable image registration, and movements were measured. Margins were determined via the formula "1.3×Σ+0.5×σ" and 95% prediction intervals. Results: A total of 22 patients (66 fractions) were analyzed. The median interval between the first and third MRI scans were 38 minutes. The mean ± standard deviation of the spinal cord movements after this interval were −0.01 ± 0.06 for the x-axis (right–left), 0.01 ± 0.14 for the y-axis (caudal–cranial), 0.07 ± 0.05 for the z-axis (posterior–anterior), and 0.15 ± 0.08 for the 3D distance, respectively. The correlation coefficients of the 3D distance between the spinal cord and the spinal canal was high (0.92). The calculated planning organ at risk volume margin for all directions was 0.11 cm for spinal cord. The 95% prediction intervals for the x-axis, y-axis, and z-axis were −0.11–0.09 cm, −0.23–0.25 cm and −0.14–0.03 cm, respectively. Conclusions: Margins are necessary in MRgART to compensate for intrafractional movement and ensure safe treatment delivery. [ABSTRACT FROM AUTHOR]

The purpose of this study was to show the safety of volumetric modulated arc therapy (VMAT) with deep inspiration breath-hold (DIBH) in hypofractionated radiotherapy for left-sided breast cancer after breast-conserving surgery in a clinical setting. Twenty-five Japanese women, aged 20–59 years, who were enrolled in this prospective non-inferiority study received VMAT under the condition of DIBH with 42.4 Gy/16 fractions for whole-breast irradiation (WBI) ± boost irradiation for the tumor bed to show the non-inferiority of VMAT with DIBH to conventional fractionated WBI with free breathing. The primary endpoint was the rate of occurrence of radiation dermatitis of Grade 3 or higher or pneumonitis of Grade 2 or higher within 6 months after the start of radiotherapy. This study was registered with UMIN00004321. All of the enrolled patients completed the planned radiotherapy without interruption. The evaluation of adverse events showed that three patients (12.0%) had Grade 2 radiation dermatitis. There was no other Grade 2 adverse event and there was no patient with an adverse event of Grade 3 or higher. Those results confirmed our hypothesis that the experimental treatment method is non-inferior compared with our historical results. There was no patient with locoregional recurrence or metastases. In conclusion, VMAT under the condition of DIBH in hypofractionated radiotherapy for left-sided breast cancer after breast-conserving surgery can be performed safely in a clinical setting. [ABSTRACT FROM AUTHOR]

Background: Renal atrophy is observed in an irradiated kidney. The aim of this study was to determine dose-volume histogram parameters and other factors that predict renal atrophy after 10-fraction stereotactic body radiotherapy (SBRT) for primary renal cell carcinoma (RCC).Methods: A total of 14 patients (11 males, 3 females) who received SBRT for RCC at Tohoku University Hospital between April 2010 and February 2014 were analyzed. The median serum creatinine level was 1.1 mg/dl and two patients had a single kidney. Nine patients were implanted with fiducial markers. The median tumor diameter was 30 mm. SBRT was delivered at 70 Gy in 10 fractions for 7 tumors, at 60 Gy in 10 fractions for 2 tumors, and at 50 Gy in 10 fractions for 5 tumors with 6 and/or 15 MV X-ray using 5 to 8 multi-static beams. Renal atrophy was assessed using post-SBRT CT images after 12-24 months intervals. Correlations were examined by Spearman rank correlation analysis. Differences between two groups were evaluated by the Mann-Whitney test, and pairwise comparisons were made by the Wilcoxon signed-rank test.Results: The median tumor volume shrunk from 14.8 cc to 10.6 cc (p = 0.12), and the median irradiated kidney volume changed from 160.4 cc to 137.1 cc (p < .01). The median peak creatinine level was 1.6 mg/dl after treatment (p < .01). Percentage volumes of the irradiated kidney receiving at least 10 Gy (V10, p = 0.03), V20 (p < .01), V30(p < .01), V40 (p = 0.01), mean irradiated kidney dose (p < .01), and magnitude of overlap between PTV and kidney volume (p = 0.03) were significantly correlated with post-treatment irradiated kidney volume in percent, and V20-V30 had strong correlation (r < -0.70, p < .01). Patients with implanted fiducial markers showed a significantly lower ratio of renal atrophy (p = 0.02).Conclusions: Significant renal atrophic change was observed. Dose distribution of SBRT at 20-30 Gy had a strong correlation with renal atrophy when irradiation was performed in 10 fractions. [ABSTRACT FROM AUTHOR]

Fillet or butt welded joints were prepared, so that the sheets of low carbon or stainless steels such as 18Cr–1Mo–Ti were welded by MIG or TIG method with the ferritic or austenitic welding wires, followed with or without heat treatment. The geometry of deposited zone, element distribution, crystal structure, microstructure, stress and fatigue of the joints, was tested with the tensile and fatigue tests, EPMA composition analysis, X-ray diffraction, microscopic examination, computer simulation etc. [Copyright &y& Elsevier]

This study aimed to develop and evaluate field shape optimization technique based on dose calculation using daily cone-beam computed tomography (CBCT) to compensate for interfractional anatomic changes in three-dimensional conformal radiation therapy (3D-CRT) for prostate cancer. For each of 10 patients, 9-10 CBCT images were obtained throughout the treatment course. The prostate, seminal vesicles, and rectum were manually contoured in all CBCT images. Subsequently, plan adaptation was performed with a program developed in-house. This program calculates dose distributions on CBCT images and optimizes field shape to minimize rectal dose while keeping the target at the optimal dose coverage (the planning target volume D 95% receives 95% of the prescription dose). To evaluate the adaptive planning approach, we re-calculated dose distributions on CBCT images based on the conventional and adaptive plans. For the entire cohort, plan adaptation improved rectal V 50 Gy , V 60 Gy , V 65 Gy , and V 70 Gy by -7.71±8.43%, -8.30±8.90%, -7.91±8.51% and -7.03±7.70% on average (±SD), respectively. Our results demonstrate that adaptive planning approach is superior to the conventional planning approach for optimizing dose distribution, and this adaptive approach can optimize field shape in 3 min. The proposed approach can be an effective solution for the problem of interfractional anatomic changes in 3D-CRT for prostate cancer.

Our aim was to investigate the feasibility of a three-dimensional (3D) -printed head-and-neck (HN) immobilization device by comparing its positional accuracy and dosimetric properties with those of a conventional immobilization device (CID). We prepared a 3D-printed immobilization device (3DID) consisting of a mask and headrest with acrylonitrile-butadiene-styrene resin developed from the computed tomography data obtained by imaging a HN phantom. For comparison, a CID comprising a thermoplastic mask and headrest was prepared using the same HN phantom. We measured the setup error using the ExacTrac X-ray image system. Furthermore, using the ionization chamber and the water-equivalent phantom, we measured the changes in the dose due to the difference in the immobilization device material from the photon of 4 MV and 6 MV. The positional accuracy of the two devices were almost similar in each direction except in the vertical, lateral, and pitch directions (t-test, p<0.0001), and the maximum difference was 1 mm, and 1°. The standard deviations were not statistically different in each direction except in the longitudinal (F-test, p=0.034) and roll directions (F-test, p<0.0001). When the thickness was the same, the dose difference was almost similar at a 50 mm depth. At a 1 mm depth, the 3DID-plate had a 2.9-4.2% lower dose than the CID-plate. This study suggested that the positional accuracy and dosimetric properties of 3DID were almost similar to those of CID.