Search

Abstract The attraction between π-conjugated planar electron donor and acceptor molecules that form many stable charge-transfer (CT) complexes has been explained by quantum chemical CT interactions, although the fundamental origin remains unclear. Here, we demonstrate the mechanism of CT complex formation by potential energy map analysis for TTF–CA and BTBT–TCNQ, using energy decomposition of intermolecular interaction by symmetry-adapted perturbation theory (SAPT) combined with coupled cluster calculation. We find that the source of attraction between donor and acceptor molecules is ascribed primarily to the dispersion force and also to the electrostatic force. In contrast, the contribution of CT interactions to the attractive forces is minimal. We demonstrate that the highly directional feature of the exchange repulsion force, coupled with the attractive dispersion and electrostatic forces, is crucial in determining the intermolecular arrangements of actual CT crystals. These findings are key for understanding the unique structural and electronic properties of π-conjugated CT complexes.

The challenge in developing molecule-based electronic materials lies in the uncontrollable or unpredictable nature of their crystal structures, which are crucial for determining both electrical properties and thin-film formability. This review summarizes the findings of a research project focused on the systematic development of crystalline organic semiconductors (OSCs) and organic ferroelectrics by integrating experimental, computational, and data sciences. The key outcomes are as follows: 1) Data Science: We developed a method to identify promising materials from crystal structure databases, leading to the discovery of unique molecule-based ferroelectrics. 2) Computational Science: The origin of high layered crystallinity in π-core – alkyl-chain-linked molecules was clarified based on intermolecular interaction calculations. We proposed a stepwise structure optimization method tailored for layered OSCs. 3) Material Development: We developed various alkylated layered OSCs, which exhibit high mobility, heat resistance, and solubility. We discovered several unique phenomena, including frozen liquid crystal phases, significant polar/antipolar control, and phase control through mixing, leveraging the variability of alkyl chain length. We also developed molecule-based ferroelectrics showing peculiar ferroelectricity, including multiple polarization reversal, competing ferroelectric/antiferroelectric order, and spinner-type configurations with π-skeletons. 4) Advanced Structural Analysis: By combining cryo-electron microscopy and X-ray-free electron laser (XFEL), we enabled crystal structure analysis for ultrathin crystals that are usually difficult to analyse. 5) Device Development: Utilizing the self-organized growth of layered OSCs through solution processes, we developed a method to produce exceptionally clean semiconductor – insulator interfaces, achieving field-effect transistors that show sharp (near theoretical limit) and stable switching at low voltages.

Abstract Some rodlike organic molecules exhibit exceptionally high layered crystallinity when composed of a link between π‐conjugated backbone (head) and alkyl chain (tail). These molecules are aligned side‐by‐side unidirectionally to form self‐organized polar monomolecular layers, providing promising 2D materials and devices. However, their interlayer stacking arrangements have never been tunable, preventing the unidirectional arrangements of molecules in whole crystals. Here, it is demonstrated that polar/antipolar interlayer stacking can be systematically controlled by the alkyl carbon number n, when the molecules are designed to involve effectively weakened head‐to‐head affinity. They exhibit remarkable odd–even effect in the interlayer stacking: alternating head‐to‐head and tail‐to‐tail (antipolar) arrangement in odd‐n crystals, and uniform head‐to‐tail (polar) arrangement in even‐n crystals. The films show excellent field‐effect transistor characteristics presenting unique polar/antipolar dependence and considerably improved subthreshold swing in the polar films. Additionally, the polar films present enhanced second‐order nonlinear optical response along normal to the film plane. These findings are key for creating polarity‐controlled optoelectronic materials and devices.

Abstract Printed amplifiers are promising components for flexible and wearable devices. The circuits need to have small footprint, high amplification, and low power consumption, which is not simultaneously possible with conventional thin‐film transistors because multiple stages are required and introduce sources of variability, failure, or wasted area. Source‐gated transistors (SGTs) can in principle have extremely high intrinsic gain but this is not always the case because of lateral field control problems. A good solution is the use of field plate structures, which are straightforward to implement with top contacts but not so with bottom contacts. Here, a printed implementation of organic SGT with a field plate is presented, which can achieve a record high intrinsic gain of 920 V/V. The single‐stage common‐source amplifier with two organic SGTs also exhibits a high gain of 700 V/V. Simulations confirm the effectiveness of the printed field plate, making it a promising approach for future flexible and wearable electronics.

Abstract Background A once-daily (o.d.) fixed-dose combination of indacaterol acetate (IND), glycopyrronium bromide (GLY), and mometasone furoate (MF) delivered via the Breezhaler® device (IND/GLY/MF) is being developed for treatment of asthma. This study compared steady-state pharmacokinetics of IND, GLY and MF between Japanese and Caucasian male subjects after multiple inhalations of IND/GLY/MF o.d. Methods This was a single-center, open-label, 2-treatment crossover study with a 21-day washout period. Japanese and Caucasian subjects received IND/GLY/MF 150/50/80 μg (inhaled corticosteroid [ICS] medium-dose) or 150/50/160 μg o.d. (ICS high-dose) for 14 days in each period. Pharmacokinetics were characterized up to 24 h post-dose on Days 1 and 14. Results In total, 16 Japanese (median age 31 years [range 20–40 years], mean weight 68.3 kg) and 17 Caucasian subjects (median age 27 years [range 21–43 years], mean weight 75.0 kg) were randomized. Geometric mean ratios (Japanese/Caucasian) [90% confidence interval (CI)] for Cmax for IND, GLY and MF at the high ICS dose on Day 14 were 1.31 [1.13, 1.51] 1.38 [1.13, 1.69] and 1.07 [0.969, 1.18], respectively. Geometric mean ratios (Japanese/Caucasian) [90% CI] for AUC0–24h on Day 14 for IND, GLY and MF at the high ICS dose were 1.17 [1.01, 1.35], 1.05 [0.920, 1.20] and 1.15 [1.05, 1.27] respectively. Similar trends were noted for all components for the medium ICS dose treatment. IND/GLY/MF was safe and well tolerated; no AEs suspected to be study drug-related were observed. Conclusion Pharmacokinetics of IND, GLY and MF (high and medium dose) when delivered as a fixed-dose combination were comparable between Japanese and Caucasian subjects. The IND/GLY/MF combination at the administrated doses was safe and well tolerated in both ethnic groups. Trial registration Japan Registry of Clinical Trial: jRCT2031200227, retrospectively registered on 04, December, 2020.

Electron 3D crystallography can reveal the atomic structure from undersized crystals of various samples owing to the strong scattering power of electrons. Here, a direct electron detector DE64 was tested for small and thin crystals of protein and an organic molecule using a JEOL CRYO ARM 300 electron microscope. The microscope is equipped with a cold-field emission gun operated at an accelerating voltage of 300 kV, quad condenser lenses for parallel illumination, an in-column energy filter, and a stable rotational goniometer stage. Rotational diffraction data were collected in an unsupervised manner from crystals of a heme-binding enzyme catalase and a representative organic semiconductor material Ph-BTBT-C10. The structures were determined by molecular replacement for catalase and by the direct method for Ph-BTBT-C10. The analyses demonstrate that the system works well for electron 3D crystallography of these molecules with less damaging, a smaller point spread, and less noise than using the conventional scintillator-coupled camera.

Background: Acute blood purification (ABP) therapy is used regularly in the clinical setting and reportedly alleviates organ failure associated with severe systemic inflammatory responses, leading to reduced mortality. The present study aimed to determine whether there is a difference in efficacy between polysulfone (PS) membranes, which are currently used regularly in the clinical setting, and vitamin E-coated polysulfone (VEPS) membranes, which are anticipated to exhibit the antioxidant and anti-inflammatory properties of vitamin E. Methods: Male Wistar rats (n=15/group) were intravenously administered 10 mg/kg of lipopolysaccharide (LPS) to establish a systemic inflammatory response model. Six hours after LPS administration, hemodiafiltration (HDF) was performed for 30 minutes using a PS or VEPS membrane under general anesthesia. Blood was collected at various time points, lung tissue was evaluated histologically, and 24-hour survival was assessed. Results: The rats in the VEPS group tended to have a higher survival rate than those in the PS group when undergoing HDF, although the difference was not significant. With respect to lung tissue, the inflammatory response was suppressed to a greater extent in the VEPS group than the PS group. Serum interleukin (IL)-6 levels were reduced at an early stage, plasma antioxidant activity was increased, and oxidative stress was reduced in the VEPS group compared to the PS group. Conclusion: Relative to PS membrane-based HDF, the survival rate tended to improve and inflammation was subdued earlier due to the antioxidant activity and early attenuation of inflammation associated with VEPS membrane-based HDF.

Due to the remarkable properties of chalcogenide (Chg) glasses, Chg optical waveguides should play a significant role in the development of optical biosensors. This paper describes the fabrication and properties of chalcogenide fibres and planar waveguides. Using optical fibre transparent in the mid-infrared spectral range we have developed a biosensor that can collect information on whole metabolism alterations, rapidly and in situ. Thanks to this sensor it is possible to collect infrared spectra by remote spectroscopy, by simple contact with the sample. In this way, we tried to determine spectral modifications due, on the one hand, to cerebral metabolism alterations caused by a transient focal ischemia in the rat brain and, in the other hand, starvation in the mouse liver. We also applied a microdialysis method, a well known technique for in vivo brain metabolism studies, as reference. In the field of integrated microsensors, reactive ion etching was used to pattern rib waveguides between 2 and 300 μm wide. This technique was used to fabricate Y optical junctions for optical interconnections on chalcogenide amorphous films, which can potentially increase the sensitivity and stability of an optical micro-sensor. The first tests were also carried out to functionalise the Chg planar waveguides with the aim of using them as (bio)sensors.

Anodization techniques by alternating current (ac) are introduced in this review. By using ac anodization, laminated alumina films are fabricated. Different types of alumina films consisting of 50–200 nm layers were obtained by varying both the ac power supply and the electrolyte. The total film thickness increased with an increase in the total charge transferred. The thickness of the individual layers increased with the ac voltage; however, the anodization time had little effect on the film thickness. The laminated alumina films resembled the nacre structure of shells, and the different morphologies exhibited by bivalves and spiral shells could be replicated by controlling the rate of increase of the applied potentials.

New processes for the preparation of nanostructure on glass surfaces have been developed through anodic oxidation of sputtered aluminum. Aluminum thin film sputtered on a tin doped indium oxide (ITO) thin film on a glass surface was converted into alumina by anodic oxidation. The anodic alumina gave nanometer size pore array standing vertically on the glass surface. Kinds of acids used in the anodic oxidation changed the pore size drastically. The employment of phosphoric acid solution gave several tens nanometer size pores. Oxalic acid cases produced a few tens nanometer size pores and sulfuric acid solution provided a few nanometer size pores. The number of pores in a unit area could be changed with varying the applied voltage in the anodization and the pore sizes could be increased by phosphoric acid etching. The specimen consisting of a glass substrate with the alumina nanostructures on the surface could transmit UV and visible light. An etched specimen was dipped in a TiO2 sol solution, resulting in the impregnation of TiO2 sol into the pores of alumina layer. The TiO2 sol was heated at ~400 °C for 2 h, converting into anatase phase TiO2. The specimens possessing TiO2 film on the pore wall were transparent to the light in UV–Visible region. The electro deposition technique was applied to the introduction of Ni metal into pores, giving Ni nanorod array on the glass surface. The removal of the barrier layer alumina at the bottom of the pores was necessary to attain smooth electro deposition of Ni. The photo catalytic function of the specimens possessing TiO2 nanotube array was investigated in the decomposition of acetaldehyde gas under the irradiation of UV light, showing that the rate of the decomposition was quite large.