Search

Titanium has been proposed as a mesh material for guided bone regeneration (GBR) since the 1990s. To overcome difficulties in shaping and adapting meshes to the defect, digital techniques were introduced to digitally print meshes capable of fitting the bone perfectly, reproduced through the patient's CT scan. Five patients were included in this case series, and their CBCT data were acquired and sent to the producer of the titanium meshes. 3D regenerative surgery was performed with titanium meshes and a mix of demineralized bovine bone matrix (DBBM) and autogenous bone (1:1 ratio). Radiographic measures were evaluated on paraxial sections of the CBCT through a dedicated software. When possible, regenerated bone samples were obtained at implant insertion. Four out of five regenerated areas healed without local or systemic complications. One mesh was removed after 2 months and 2 weeks due to exposure. The mean vertical bone gain was 4.3 ± 1.5 mm (range: 2.5 to 7 mm). Two histologic samples were obtained. In sample 1, bone tissue area and graft material area were 44.4% and 12.5%, respectively; in sample 2, the same parameters were 15.6% and 16.9%, respectively. [ABSTRACT FROM AUTHOR]

Among different therapeutic strategies proposed in the case of bone volume deficit, guided bone regeneration (GBR) is a consolidated surgical procedure. The objective of this study is to retrospectively evaluate the behavior of two bone grafts with different consistencies in the GBR procedure by measuring the volumetric tissue changes 1 year after surgery. For this retrospective analysis, 25 cases of GBR with simultaneous implant insertion were selected. A total of 13 were grafted with a porcine cortico-cancellous bone mix (CCBM group), and 12 were grafted with a pre-hydrated granulated cortico-cancellous bone mix of porcine origin blended with 20% TSV gel (Collagenated-CCBM). A collagen membrane was fixed to cover the bone defect. A total of 42 implants were placed with computer-guided surgery. Preoperative and 12-month postoperative digital impressions were used to evaluate dimensional changes. Student's t-test used for independent samples showed no statistically significant differences between the integrated distance (p = 0.995) and mean distance (p = 0.734). The mean integrated distance in the CCBM group was 41.80 (SD. 101.18) compared to a mean of 42.04 (SD. 66.71) in the Collagenated-CCBM group. Given the limitations of this study, in patients with peri-implant bone dehiscence, simple heterologous and collagenated heterologous cortico-cancellous bone grafts are suitable for filling the bone defect to promote bone regeneration, although further studies are needed. [ABSTRACT FROM AUTHOR]

Cellulose nanocrystals (CNCs) are cellulose-derived nanomaterials that can be easily obtained, e.g., from vegetable waste produced by circular economies. They show promising antimicrobial activity and an absence of side effects and toxicity. This study investigated the ability of CNCs to reduce microbial adherence and biofilm formation using in vitro microbiological models reproducing the oral environment. Microbial adherence by microbial strains of oral interest, Streptococcus mutans and Candida albicans, was evaluated on the surfaces of salivary pellicle-coated enamel disks in the presence of different aqueous solutions of CNCs. The anti-biofilm activity of the same CNC solutions was tested against S. mutans and an oral microcosm model based on mixed plaque inoculum using a continuous-flow bioreactor. Results showed the excellent anti-adherent activity of the CNCs against the tested strains from the lowest concentration tested (0.032 wt. %, p < 0.001). Such activity was significantly higher against S. mutans than against C. albicans (p < 0.01), suggesting a selective anti-adherent activity against pathogenic strains. At the same time, there was a minimal, albeit significant, anti-biofilm activity (0.5 and 4 wt. % CNC solution for S. mutans and oral microcosm, respectively, p = 0.01). This makes CNCs particularly interesting as anticaries agents, encouraging their use in the oral field. [ABSTRACT FROM AUTHOR]

Objective: To assess the peri‐implant soft tissue profiles between argon plasma treatment (PT) and non‐treated (NPT) healing abutments by comparing clinical and histological parameters 2 months following abutment placement. Materials and Methods: Thirty participants were randomly assigned to argon‐plasma treatment abutments group (PT) or non‐treated abutments (NPT) group. Two months after healing abutment placement, soft peri‐implant tissues and abutment were harvested, and histological and clinical parameters including plaque index, bleeding on probing, and keratinized mucosa diameter (KM) were assessed. Specialized stainings (hematoxylin–eosin and picrocirious red) coupled with immunohistochemistry (vimentin, collagen, and CK10) were performed to assess soft tissue inflammation and healing, and the collagen content keratinization. In addition to standard statistical methods, machine learning algorithms were applied for advanced soft tissue profiling between the test and control groups. Results: PT group showed lower plaque accumulation and inflammation grade (6.71% vs. 13.25%, respectively; p‐value 0.02), and more advanced connective tissue healing and integration compared to NPT (31.77% vs. 23.3%, respectively; p = 0.009). In the control group, more expressed keratinization was found compared to the PT group, showing significantly higher CK10 (>47.5%). No differences in KM were found between the groups. Significance: PT seems to be a promising protocol for guided peri‐implant soft tissue morphogenesis reducing plaque accumulation and inflammation, and stimulating collagen and soft tissue but without effects on epithelial tissues and keratinization. [ABSTRACT FROM AUTHOR]

In oral biology, tissue engineering aims at regenerating functional tissues through a series of key events that occur during alveolar/periodontal tissue formation and growth, by means of scaffolds that deliver signaling molecules and cells. Due to their excellent physicochemical properties and biomimetic features, nanomaterials are attractive alternatives offering many advantages for stimulating cell growth and promoting tissue regeneration through tissue engineering. The main aim of this article was to review the currently available literature to provide an overview of the different nano-scale scaffolds as key factors of tissue engineering for alveolar bone regeneration procedures. In this narrative review, PubMed, Medline, Scopus and Cochrane electronic databases were searched using key words like “tissue engineering”, “regenerative medicine”, “alveolar bone defects”, “alveolar bone regeneration”, “nanomaterials”, “scaffolds”, “nanospheres” and “nanofibrous scaffolds”. No limitation regarding language, publication date and study design was set. Hand-searching of the reference list of identified articles was also undertaken. The aim of this article was to give a brief introduction to review the role of different nanoscaffolds for bone regeneration and the main focus was set to underline their role for alveolar bone regeneration procedures.

Introduction: Implant-related infections and infected fractures are significant burdens in orthopedics. Staphylococcus epidermidis is one of the main causes of bone infections related to biofilm formation upon implants. Current antibiotic prophylaxis/therapy is often inadequate to prevent biofilm formation and results in antibiotic resistance. The development of bioactive materials combining antimicrobial and osteoconductive properties offers great potential for the eradication of microorganisms and for the enhancement of bone deposition in the presence of infections. The purpose of this study is to prevent the development of methicillin-resistant S. epidermidis (MRSE)- infected nonunion in a rat model. Methods: To this end, a recently developed in our laboratories bioactive material consisting of antibiotic-loaded nanoparticles based on carboxylic acid functionalized hyperbranched aliphatic polyester (CHAP) that are integrated into peptide-enriched silk fibroin sponges with osteoconductive properties (AFN-PSF) was employed, whose biocompatibility and microbiological tests provided proof of its potential for the treatment of both orthopedic and dental infections. In particular, non-critical femoral fractures fixed with plates and screws were performed in Wistar rats, which were then randomly divided into three groups: 1) the sham control (no infection, no treatment); 2) the control group, infected with MRSE and treated with peptideen-riched silk fibroin sponges incorporating non-drug-loaded functionalized nanoparticles (PSF); 3) the treated group, infected with MRSE and treated with peptide-enriched silk fibroin sponges incorporating vancomycin-loaded functionalized nanoparticles (AFN-PSF). After 8 weeks, bone healing and osteomyelitis were clinically assessed and evaluated by micro-CT, microbiological and histological analyses. Results: The sham group showed no signs of infection and complete bone healing. The PSF group failed to repair the infected fracture, displaying 75% of altered bone healing and severe signs of osteomyelitis. The AFN-PSF treated group reached 70% of fracture healing in the absence of signs of osteomyelitis, such as abscesses in the cortical and intraosseous compartments and bone necrosis with sequestra. Discussion: AFN-PSF sponges have proven effective in preventing the development of infected nonunion in vivo. The proposed nanotechnology for local administration of antibiotics can have a significant impact on patient health in the case of orthopedic infections. [ABSTRACT FROM AUTHOR]

The aim of this study was to evaluate the surface tension and the antimicrobial activity in infected dentin of a NaOCl solution combined with an etidronate powder (Dual Rinse® HEDP), compared to pure NaOCl and the classic NaOCl + EDTA irrigating sequence, respectively. The surface tension of three irrigants was measured by Wilhelmy technique. To evaluate the antimicrobial activity of the solutions, 26 human teeth were contaminated for 5 days with E. faecalis. After bacterial contamination, ten samples were irrigated with NaOCl followed by EDTA, another ten with NaOCl/Dual Rinse® HEDP, and four were used as positive controls. Two specimens not contaminated were used as negative controls. After live/dead BacLight staining, samples were examined by CLSM for analyzing % of residual live and dead cells. Comparison of bacterial viability between and within groups was performed using the Mann–Whitney test for independent samples and the Wilcoxon signed-rank test, respectively. The mean surface tension of EDTA was significantly lower than that of the other irrigants tested (p < 0.001). Conversely, the surface tension of NaOCl/Dual Rinse® HEDP solution was significantly higher than that of all the other solutions (p < 0.001). Residual bacterial viability in the NaOCl/Dual Rinse® HEDP (1.71%) was significantly lower (p = 0.019) than in the NaOCl + EDTA group (3.77%). All of the experimental groups showed significantly lower proportion of viable bacterial cells than the positive control group (p < 0.01). Clinical relevance adding etidronate to NaOCl increases its antimicrobial effect in dentinal tubules even though increases its surface tension. [ABSTRACT FROM AUTHOR]

This systematic review is aimed at evaluating the effectiveness of synthetic block materials for bone augmentation in preclinical in vivo studies. An electronic search was performed on Pubmed, Scopus, EMBASE. Articles selected underwent risk-of-bias assessment. The outcomes were: new bone formation and residual graft with histomorphometry, radiographic bone density, soft tissue parameters, complications. Meta-analysis was performed to compare new bone formation in test (synthetic blocks) vs. control group (autogenous blocks or spontaneous healing). The search yielded 214 articles. After screening, 39 studies were included, all performed on animal models: rabbits (n = 18 studies), dogs (n = 4), rats (n = 7), minipigs (n = 4), goats (n = 4), and sheep (n = 2). The meta-analysis on rabbit studies showed significantly higher new bone formation for synthetic blocks with respect to autogenous blocks both at four-week (mean difference (MD): 5.91%, 95% confidence intervals (CI): 1.04, 10.79%, p = 0.02) and at eight-week healing (MD: 4.44%, 95% CI: 0.71, 8.17%, p = 0.02). Other animal models evidenced a trend for better outcomes with synthetic blocks, though only based on qualitative analysis. Synthetic blocks may represent a viable resource in bone regenerative surgery for achieving new bone formation. Differences in the animal models, the design of included studies, and the bone defects treated should be considered when generalizing the results. Clinical studies are needed to confirm the effectiveness of synthetic blocks in bone augmentation procedures. [ABSTRACT FROM AUTHOR]

Critical-sized mandibular bone defects, arising from, for example, resections after tumor surgeries, are currently treated with autogenous bone grafts. This treatment is considered very invasive and is associated with limitations such as morbidity and graft resorption. Tissue engineering approaches propose to use 3D scaffolds that combine structural features, biomaterial properties, cells, and biomolecules to create biomimetic constructs. However, mimicking the complex anatomy and composition of the mandible poses a challenge in scaffold design. In our study, we evaluated the dual effect of complex pore geometry and material composition on the osteogenic potential of 3D printed scaffolds. The scaffolds were made of polycaprolactone (PCL) alone (TCP0), or with a high concentration of β-tricalcium phosphate (β-TCP) up to 40% w/w (TCP40), with two complex pore geometries, namely a star- (S) and a diamond-like (D) shape. Scanning electron microscopy and microcomputed tomography images confirmed high fidelity during the printing process. The D-scaffolds displayed higher compressive moduli than the corresponding S-scaffolds. TCP40 scaffolds in simulated body fluid showed deposition of minerals on the surface after 28 days. Subsequently, we assessed the differentiation of seeded bone marrow-derived human mesenchymal stromal cells (hMSCs) over 28 days. The early expression of RUNX2 in the cell nuclei confirmed the commitment toward an osteogenic phenotype. Moreover, alkaline phosphatase (ALP) activity and collagen deposition displayed an increasing trend in the D-scaffolds. Collagen type I was mainly present in the deposited extracellular matrix (ECM), confirming deposition of bone matrix. Finally, Alizarin Red staining showed successful mineralization on all the TCP40 samples, with higher values for the S-shaped scaffolds. Taken together, our study demonstrated that the complex pore architectures of scaffolds comprised TCP40 stimulated osteogenic differentiation and mineralization of hMSCs in vitro . Future research will aim to validate these findings in vivo .