Search

Printed electronic paper identifies its interest in flexible organic electronics and sustainable and clean energy applications because of its straightforward production method, cost‐effectiveness, and positive environmental impact. However, current limitations include restricted material thickness and the use of supporting substrate for printing. Here, 2D and 3D electronic patterned paper are fabricated from direct ink writing (DIW) nanocellulose and PEDOT:PSS‐based materials using syringe deposition and 3D printing. The conductor patterns are integrated in the bulk of the paper, while non‐conductive sections are used as support to form free‐standing paper. The strong interface between the patterns of electronic patterned paper gives mechanical stability for practical handling. The conductive paper‐based electrode has 202 S cm−1 and is capable of handling electric current up to 0.7 A, which can be used for high‐power devices. Printed supercapacitor papers show high specific energy of 4.05 Wh kg−1, specific power of 4615 W kg−1 at 0.06 A g−1, and capacitance retention above 95% after 2000 cycles. The new design structure of electronic patterned papers presents a solution for additive manufacturing of paper‐based composites for supercapacitors, wearable electronics, or sensors for smart packaging. [ABSTRACT FROM AUTHOR]

Low weight, small footprint, and high performances are essential requisites for the implementation of energy storage devices within consumer electronics. One way to achieve these goals is to increase the thickness of the active material layer. In this work, carbonized and graphitized rayon felt, a cellulose‐derived material, is used as a three‐dimensional current collector scaffold to enable the incorporation of large amount of active energy storage materials and ionic liquid‐based gel electrolyte in the supercapacitor devices. PEDOT:PSS, alone or in combination with active carbon, has been used as the active material. Three‐dimensional supercapacitors with high per unit area capacitance (more than 1.1 F/cm2) have been achieved owing to the loading of large amount of active material in the felt matrix. Areal energy density of more than 101 μWh/cm2 and areal power density of more than 5.9 mW/cm2 have been achieved for 0.8 V operating voltage at a current density of 1 mA/cm2. A nanographite material was found to be beneficial in reducing the internal serial resistance of the supercapacitor to lower than 1.7 Ω. Furthermore, it was shown that even after 2000 times cycling test, the devices could still retain its performance with at least 88% coulombic efficiency for all the devices. All the materials are readily available commercially, environmentally sustainable and the process can potentially be upscaled with industrial process. [ABSTRACT FROM AUTHOR]

Ultrathin devices are rapidly developing for skin‐compatible medical applications and wearable electronics. Powering skin‐interfaced electronics requires thin and lightweight energy storage devices, where solution‐processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray‐coated symmetric microsupercapacitors (μSCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of ≈11 µm to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm−3. Long‐term operation capability (90% of capacitance retention after 104 cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real‐sized μSCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected μ‐SCs as an example of a wearable, skin‐integrated, fully organic electronic application. [ABSTRACT FROM AUTHOR]

Advances in organic electronics necessitates, ultrathin and miniaturized implantable energy storage modules. Here, an approach for the fabrication of on-chip, ultraflexible electrochemical capacitors is demonstrated. Two different electroactive conjugated polymers are utilized in a fabrication route that allows the patterning of finger electrodes for an ultraflexible energy storage technology. A strategy is demonstrated to realize supercapacitors with a total device thickness of 4 μm, including substrate, polymer electrode, and electrolyte. Interdigitated 20-finger electrodes from either Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) or polythiophene functionalized with tetraethylene glycol side chains P(g42T-T), with 50 μm or 90 μm electrode spacings, are fabricated using a parylene peel off method, followed by electrolyte deposition. The miniaturized devices show 0.77 mF/cm2 areal capacitance for PEDOT:PSS and 0.06 mF/cm2 for P(g42T-T). Furthermore, the devices exhibit excellent mechanical durability, showing robust operational performance at a bending radius of 6.5 mm. [Display omitted] • Scalable fabrication route for polymer IDE structures using parylene peel off method. • PEDOT:PSS and P(g42T-T) microsupercapacitors with more than 0.6 mF/cm2 capacitance. • Ultrathin organic electronics device technology with total thickness of 4 μm. • Excellent mechanical durability, showing robust operational performance at a bending radius of 6.5 mm. [ABSTRACT FROM AUTHOR]

Three-dimensional (3D) bioprinting technologies have great attention in different researching areas such as tissue engineering, medicine, etc. due to its maximum mimetic property of natural biomaterials by providing cell combination, growth factors, and other biomaterials. Bioprinting of tissues, organs, or drug delivery systems emerged layer-by-layer deposition of bioinks. 3D bioprinting technique has some complexity such as choice of bioink combination, cell type, growth, and differentiation. In this study, a composite material in 3D bioprinting studies has been developed for biofabrication of the cell carrying scaffolds namely cryogenic scaffolds. Cryogenic scaffolds are highly elastic and have a continuous interconnected macroporous structure in 3D biomaterials that enable the cell attachment, viability, and proliferation. Freeze-drying cryogelation process for the formation of cryogel scaffolds has been achieved firstly among 3D bioprinting studies. Cryogenic gelatin–hyaluronic acid (Gel–HA)-based 3D-bioprinted scaffolds have been fabricated and characterized by scanning electron microscope (SEM), optical microscope images, tensile tests, determination of swelling degree, and porosity. Then, L929 cells from mouse C3H/An have been attached to cryogenic Gel–HA scaffolds. Cell attachment, viability, and proliferation on cryogenic scaffolds have been investigated for 7 days. The results showed that a combination of 3D bioprinting technologies and cryogenic process provided a new direction on biomedical scaffolds. [ABSTRACT FROM AUTHOR]

The need for achieving sustainable technologies has encouraged research on renewable and biodegradable materials for novel products that are clean, green, and environmentally friendly. Nanocellulose (NC) has many attractive properties such as high mechanical strength and flexibility, large specific surface area, in addition to possessing good wet stability and resistance to tough chemical environments. NC has also been shown to easily integrate with other materials to form composites. By combining it with conductive and electroactive materials, many of the advantageous properties of NC can be transferred to the resulting composites. Conductive polymers, in particular poly(3,4-ethylenedioxythiophene:poly(styrene sulfonate) (PEDOT:PSS), have been successfully combined with cellulose derivatives where suspensions of NC particles and colloids of PEDOT:PSS are made to interact at a molecular level. Alternatively, different polymerization techniques have been used to coat the cellulose fibrils. When processed in liquid form, the resulting mixture can be used as a conductive ink. This review outlines the preparation of NC/PEDOT:PSS composites and their fabrication in the form of electronic nanopapers, filaments, and conductive aerogels. We also discuss the molecular interaction between NC and PEDOT:PSS and the factors that affect the bonding properties. Finally, we address their potential applications in energy storage and harvesting, sensors, actuators, and bioelectronics. [ABSTRACT FROM AUTHOR]

Ferritin is an iron cage having protein, capable of extracting metal ions in their cages and a consequence of the electron transfer of metal ions in their cage by reduction and oxidation processes, electrochemical information storage devices can be designed. In this work, ferritin based protein biomemory substrate has been synthesized by using Amino Acid (monomer) Decorated and Light Underpinning Conjugation Approach (ANADOLUCA) method, which utilizes photosensitive electron transfer based microemulsion co-polymerization as nanobead form of ferritin. Protein substrate contains metal ions such as silver and copper or metal ion pairs namely, silver-copper (Janus bionanocage) and co-polymeric shell of the photosensitive crosslinker protein. The redox behavior of bionanocages differentiates electrochemical "writing" and "erase" states depending on these metal ions (silver or copper) or metal ion pairs. The bionanocages based biomemory substrates have been immobilized using graphene modified glassy carbon electrodes and the memory functions of ferritin based bionanocages have been confirmed by chronoamperometry (CA) and open circuit potential amperometry (OCPA). The stability and durability of multi-state memory devices represent promising properties for future bioelectronic information technologies. [ABSTRACT FROM AUTHOR]

Ion selective membranes are at the heart of energy conversion and harvesting, water treatment, and biotechnologies. The currently available membranes are mostly based on expensive and non-biodegradable polymers. Here, we report a cation-selective and low-cost membrane prepared from renewable nanocellulose and 1,2,3,4-butanetetracarboxylic acid which simultaneously serves as crosslinker and source of anionic surface groups. Charge density and structure of the membranes are studied. By using different degrees of crosslinking, simultaneous control over both the nanochannel structure and surface charge concentration is achieved, which in turn determines the resulting ion transport properties. Increasing negative charge concentration via higher crosslinker content, the obtained ion conductivity reaches up to 8 mS/cm (0.1 M KCl). Optimal ion selectivity, also influenced by the solution pH, is achieved at 20 wt% crosslinker addition (with ion conductivity of 1.6 mS/cm). As regular ~1.4 nm nanochannels were formed at this composition, nanofluidic contribution to ion transport is likely. • A renewable, low cost crosslinked nanocellulose membrane was reported. • The crosslinked membranes show excellent ion conductivity and selectivity. • A higher amount of crosslinker results in a greater ion conductivity. • An optimal ionic selectivity obtained at an addition of the crosslinker of 20 wt%. • This nanocellulose membrane is promising for ionic devices and upscaled applications. [ABSTRACT FROM AUTHOR]