Search

The structure of the lithosphere is reflecting its evolution. The Moho of the European lithosphere has already been studied intensively. This is, however, not yet the case for the lower boundary of the lithosphere, that is the lithosphere–asthenosphere boundary (LAB). We are using S-to-P converted seismic waves to study the structures of the Moho and the LAB beneath Europe including the greater Alpine Area with data from the AlpArray project and the European networks of permanent seismic stations. We use plain waveform stacking of converted waves without deconvolution and compare the results with stacking of deconvolved traces. We also compare Moho depths determinations using S-to-P converted waves with those obtained by other seismic methods. We present more detailed information about negative velocity gradients (NVG) below the Moho. Its lower bound may be interpreted as representing the LAB. We found that the thickness of the European mantle lithosphere is increasing from about 50°N towards the Alps along the entire east–west extension of the Alps. The NVG has also an east dipping component towards the Pannonian Basin and the Bohemian Massif. The Alps and their northern foreland north of about 50°N are surrounded in the east, west and north by a north dipping mantle lithosphere. Along 50°N, where the NVG is reversing its dip direction towards the north, is also the area along which the volcanoes of the European Cenozoic Rift System are located. Our results possibly indicate that the Alpine collision has deformed the entire lithosphere of the Alpine foreland as far north as about 50°N. [ABSTRACT FROM AUTHOR]

[1] The Sava Zone of the northern Dinarides is part of the Cenozoic Adria-Europe plate boundary. Here Late Cretaceous subduction of remnants of Meliata-Vardar oceanic lithosphere led to the formation of a suture, across which upper plate European-derived units of Tisza-Dacia were juxtaposed with Adria-derived units of the Dinarides. Late Cretaceous siliciclastic sediments, deposited on the Adriatic plate, were incorporated into an accretionary wedge that evolved during the initial stages of continent-continent collision. Structurally deeper parts of the exposed accretionary wedge underwent amphibolite-grade metamorphism. Grt-P1Ms-Bt thermobarometry and multiphase equilibria indicate temperatures between 550[degrees]C and 630[degrees]C and pressures between 5 and 7 kbar for this event. Peak metamorphic conditions were reached at around 65 Ma. Relatively slow cooling from peak metamorphic conditions throughout most of the Paleogene was possibly induced by hanging wall erosion in conjunction with southwest directed propagation of thrusting in the Dinarides. Accelerated cooling took place in Miocene times, when the Sava Zone underwent substantial extension that led to the exhumation of the metamorphosed units along a low-angle detachment. Footwall exhumation started under greenschist facies conditions and was associated with top-to-the-north tectonic transport, indicating exhumation from below European plate units. Extension postdates the emplacement of a 27 Ma old granitoid that underwent solid-state deformation under greenschist facies conditions. The [sup.40][Ar/.sup.39] Ar sericite and zircon and apatite fission track ages from the footwall allow bracketing this extensional unroofing between 25 and 14 Ma. This extension is hence linked to Miocene rift-related subsidence in the Pannonian basin, which represents a back-arc basin formed due to subduction rollback in the Carpathians. Citation: Ustaszewski, K., A. Kounov, S. M. Schmid, U. Schaltegger, E. Krenn, W. Frank, and B. Fugenschuh (2010), Evolution of the Adria-Europe plate boundary in the northern Dinarides: From continent-continent collision to back-arc extension, Tectonics, 29, TC6017, doi: 10.1029/2010TC002668.

To link to full-text access for this article, visit this link: http://dx.doi.org/10.1016/j.earscirev.2010.06.002 Byline: Mark R. Handy (a), Stefan M. Schmid (a)(c), Romain Bousquet (b), Eduard Kissling (c), Daniel Bernoulli (d) Keywords: Tethys; Alps; Mediterranean; plate motion; subduction Abstract: A new reconstruction of Alpine Tethys combines plate-kinematic modelling with a wealth of geological data and seismic tomography to shed light on its evolution, from sea-floor spreading through subduction to collision in the Alps. Unlike previous models, which relate the fate of Alpine Tethys solely to relative motions of Africa, Iberia and Europe during opening of the Atlantic, our reconstruction additionally invokes independent microplates whose motions are constrained primarily by the geological record. The motions of these microplates (Adria, Iberia, Alcapia, Alkapecia, and Tiszia) relative to both Africa and Europe during Late Cretaceous to Cenozoic time involved the subduction of remnant Tethyan basins during the following three stages that are characterized by contrasting plate motions and driving forces: (1) 131-84Ma intra-oceanic subduction of the Ligurian part of Alpine Tethys attached to Iberia coincided with Eo-alpine orogenesis in the Alcapia microplate, north of Africa. These events were triggered primarily by foundering of the older (170-131Ma) Neotethyan subduction slab along the NE margin of the composite African-Adriatic plate; subduction was linked by a sinistral transform system to E-W opening of the Valais part of Alpine Tethys; (2) 84-35Ma subduction of primarily the Piemont and Valais parts of Alpine Tethys which were then attached to the European plate beneath the overriding African and later Adriatic plates. NW translation of Adria with respect to Africa was accommodated primarily by slow widening of the Ionian Sea; (3) 35Ma-Recent rollback subduction of the Ligurian part of Alpine Tethys coincided with Western Alpine orogenesis and involved the formation of the Gibraltar and Calabrian arcs. Rapid subduction and arc formation were driven primarily by the pull of the gravitationally unstable, retreating Adriatic and African slabs during slow convergence of Africa and Europe. The upper European-Iberian plate stretched to accommodate this slab retreat in a very mobile fashion, while the continental core of the Adriatic microplate acted as a rigid indenter within the Alpine collisional zone. The subducted lithosphere in this reconstruction can be correlated with slab material imaged by seismic tomography beneath the Alps and Apennines, as well as beneath parts of the Pannonian Basin, the Adriatic Sea, the Ligurian Sea, and the Western Mediterranean. The predicted amount of subducted lithosphere exceeds the estimated volume of slab material residing at depth by some 10-30%, indicating that parts of slabs may be superposed within the mantle transition zone and/or that some of this subducted lithosphere became seismically transparent. Author Affiliation: (a) Institut fur Geologische Wissenschaften, Freie Universitat Berlin, Malteserstrasse 74-100, D-12249 Berlin, Germany (b) Institut fur Geowissenschaften, Universitat Potsdam, Postfach 601553, D-14415 Potsdam, Germany (c) Institut fur Geophysik, ETH-Zentrum, Sonneggstrasse 5, CH-8092 Zurich, Switzerland (d) Geologisch-Palaontologisches Institut, Universitat Basel, Bernoullistrasse 32, CH-4056 Basel, Switzerland Article History: Received 23 November 2008; Accepted 1 June 2010

The investigated HP/LT metasedimentary units of the Valaisan and adjacent European domains occupy a key position in the Alpine belt for understanding the transition from early subduction-related HP/LT metamorphism to collision-related Barrovian overprint and the evolution of mountain belts in general. The timing of high-pressure metamorphism, subsequent retrogression and following Barrow-type overprint was studied by [sup.40]Ar/[sup.39]Ar dating of biotite and several white mica generations that are well characterized in terms of mineral chemistry, texture and associated mineral assemblages. Four distinct age populations of white mica record peak pressure conditions (42-40 Ma) and several stages of subsequent retrograde metamorphic evolution (36-25 Ma). Biotite isotopic analyses yield consistent apparent ages that cluster around 18-16 Ma for the Barrow-type thermal overprint. The recorded isotopic data reveal a significant time gap in the order of some 20 Ma between subduction-related HP/LT metamorphism and collision-related Barrovian overprint, supporting the notion of a polymetamorphic evolution associated with a bimodal P-T path. Citation: Wiederkehr, M., M. Sudo, R. Bousquet, A. Berger, and S. M. Schmid (2009), Alpine orogenic evolution from subduction to collisional thermal overprint: The 40Ar/39Ar age constraints from the Valaisan Ocean, central Alps, Tectonics, 28, TC6009, doi: 10.1029/2009TC002496.

This study investigates spatial and temporal interactions of thin- and thick-skinned tectonics in a classical foreland setting located at the front of the Jura fold-and-thrust belt in eastern France. The working area coincides with the intracontinental Rhine-Bresse Transfer Zone and represents the most external front of the deformed Alpine foreland. The investigation combines analyses of largely unpublished and newly available subsurface information with our own structural data, including an exhaustive paleostress analysis and geomorphologic observations. Results are provided in the form of a new tectonic map and a series of regional cross sections through the study area. The Besancon Zone, forming the most external part of the thin-skinned fold-and-thrust belt, encroached onto the Eo-Oligocene Rhine-Bresse Transfer Fault System until early Pliocene times. Thrust propagation was largely controlled by the Late Paleozoic to Paleogene preexisting fault pattern that characterizes the Rhine-Bresse Transfer Zone. Thick-skinned deformation, dominant throughout the Avant-Monts Zone located farther to the west, was associated with compressional to transpressional reactivation of such faults. Overprinting and crosscutting criteria of fault slip data allow distinguishing between systematically fanning maximum horizontal stress axes that define the front of the thin-skinned Jura fold-and-thrust belt and consistently NW--SE directed maximum horizontal stress axes that characterize deformation of the autochthonous cover of the foreland, which is affected by thick-skinned tectonics. Tectonic and geomorphic analyses indicate that thick-skinned tectonics started at a very late stage of foreland deformation (post-early Pliocene). Geomorphic observations imply that deformation between Mesozoic cover and basement is locally still decoupled. However, overprinting relationships and recent seismicity suggest that present-day tectonic activity is thick skinned, which probably reflects ongoing tectonic underplating in the Alpine foreland.

[1] This study investigates the formation of the northernmost anticlines of the late Miocene to early Pliocene thin-skinned Jura fold-and-thrust belt and provides evidence that a transition to thick-skinned tectonics did occur in this particular area during the late Pliocene. The northernmost anticlines of the Jura fold-and-thrust belt are characterized by pronounced along-strike asymmetries that were predetermined by a fault pattern inherited from Paleogene Upper Rhine Graben rifting. This fault pattern had disrupted the Triassic basal decollement of the Jura Mountains and controlled the nucleation of thrusts and folds, as well as transfer zones during the generally (N)NW directed transport of the detached sedimentary cover. Sinistral, transpressive oblique ramps nucleated along Paleogene, NNE trending basement normal faults and led to a northward protrusion of the Jura front, encroaching onto the southernmost Upper Rhine Graben. Shortening across the frontal anticlines is greatest along the oblique ramps and decreases along strike toward the east, necessitating a gentle clockwise rotation of the detached sediments. Despite the fact that the stress field in the sedimentary cover remained unchanged, thin-skinned folding and thrusting came to a halt in the early Pliocene, giving way to thick-skinned tectonics, very probably governing neotectonic activity in the area. This transition might represent a geodynamic reorganization of the northwestern Alpine foreland. Citation: Ustaszewski, K., and S. M. Schmid (2006), Control of preexisting faults on geometry and kinematics in the northernmost part of the Jura fold-and-thrust belt, Tectonics, 25, TC5003, doi: 10.1029/2005TC001915.

The Neogene Simplon fault zone is commonly either considered as a transfer zone for dextral strike-slip movements during oblique convergence or as a core complex-type normal fault leading to orogen-parallel extension in the Alps. There is, however, evidence that the Simplon fault zone lacks a southeastward continuation. On the basis of new structural and fission-track data, we propose a model of oblique indentation of a bent Adriatic indenter leading to the formation of a curved continuous wedge of backfolds in the south, not including a southern continuation of the Simplon fault zone. Updoming related to backfolding, followed by erosion, assisted exhumation of amphibolite facies rocks. In the north, indentation led to differential shortening in the footwall and hanging wall. Keywords: Simplon fault zone, indentation tectonics, backfolding, metamorphic domes.