Search

We present a JWST MIRI/MRS spectrum (5-27 $\mathrm{\mu}$m) of the Type Ia supernova (SN Ia), SN 2021aefx at $+415$ days past $B$-band maximum. The spectrum, which was obtained during the iron-dominated nebular phase, has been analyzed in combination with previous JWST observations of SN 2021aefx, to provide the first JWST time series analysis of an SN Ia. We find the temporal evolution of the [Co III] 11.888 $\mathrm{\mu}$m feature directly traces the decay of $^{56}$Co. The spectra, line profiles, and their evolution are analyzed with off-center delayed-detonation models. Best fits were obtained with White Dwarf (WD) central densities of $\rho_c=0.9-1.1\times 10^9$g cm$^{-3}$, a WD mass of M$_{\mathrm{WD}}$=1.33-1.35M$_\odot$, a WD magnetic field of $\approx10^6$G, and an off-center deflagration-to-detonation transition at $\approx$ 0.5 $M_\odot$ seen opposite to the line of sight of the observer (-30). The inner electron capture core is dominated by energy deposition from $\gamma$-rays whereas a broader region is dominated by positron deposition, placing SN 2021aefx at +415 d in the transitional phase of the evolution to the positron-dominated regime. The formerly `flat-tilted' profile at 9 $\mathrm{\mu}$m now has significant contribution from [Ni IV], [Fe II], and [Fe III] and less from [Ar III], which alters the shape of the feature as positrons excite mostly the low-velocity Ar. Overall, the strength of the stable Ni features in the spectrum is dominated by positron transport rather than the Ni mass. Based on multi-dimensional models, our analysis is consistent with a single-spot, close-to-central ignition with an indication for a pre-existing turbulent velocity field, and excludes a multiple-spot, off-center ignition., Comment: Accepted for publication in ApJ

We present JWST spectral and photometric observations of the Type IIP supernova (SN) 2022acko at ~50 days past explosion. These data are the first JWST spectral observations of a core-collapse SN. We identify ~30 different H I features, other features associated with products produced from the CNO cycle, and s-process elements such as Sc II and Ba II. By combining the JWST spectra with ground-based optical and NIR spectra, we construct a full Spectral Energy Distribution from 0.4 to 25 microns and find that the JWST spectra are fully consistent with the simultaneous JWST photometry. The data lack signatures of CO formation and we estimate a limit on the CO mass of < 10^{-8} solar mass. We demonstrate how the CO fundamental band limits can be used to probe underlying physics during stellar evolution, explosion, and the environment. The observations indicate little mixing between the H envelope and C/O core in the ejecta and show no evidence of dust. The data presented here set a critical baseline for future JWST observations, where possible molecular and dust formation may be seen.

As a prototype detector for the SHiP Surrounding Background Tagger (SBT), we constructed a cell (120 cm x 80 cm x 25 cm) made from corten steel that is filled with liquid scintillator (LS) composed of linear alkylbenzene (LAB) and 2,5-diphenyloxazole (PPO). The detector is equipped with two Wavelength-shifting Optical Modules (WOMs) for light collection of the primary scintillation photons. Each WOM consists of an acrylic tube that is dip-coated with a wavelength-shifting layer on its surface. Via internal total reflection, the secondary photons emitted by the molecules of the wavelength shifter are guided to a ring-shaped array of 40 silicon photomultipliers (SiPMs) coupled to the WOM for light detection. The granularity of these SiPM arrays provides an innovative method to gain spatial information on the particle crossing point. Several improvements in the detector design significantly increased the light yield with respect to earlier proof-of-principle detectors. We report on the performance of this prototype detector during an exposure to high-energy positrons at the DESY II test beam facility by measuring the collected integrated yield and the signal time-of-arrival in each of the SiPM arrays. The resulting detection efficiency and reconstructed energy deposition of the incident positrons are presented, as well as the spatial and time resolution of the detector. These results are then compared to Monte Carlo simulations., Comment: Corresponding authors: A. Brignoli, A. Hollnagel, H. Lacker, F. Lyons. Prepared for submission to JINST. Updated version v3: Minor revision of the manuscript with touch-up of figures and (sub)section titles

The MALTA CMOS monolithic silicon pixel sensors has been developed in the Tower 180 nm CMOS imaging process. It includes an asynchronous readout scheme and complies with the ATLAS inner tracker requirements for the HL-LHC. Several 4-chip MALTA modules have been built using Al wedge wire bonding to demonstrate the direct transfer of data from chip-to-chip and to read out the data of the entire module via one chip only. Novel technologies such as Anisotropic Conductive Films (ACF) and nanowires have been investigated to build a compact module. A lightweight flex with 17 {\mu}m trace spacing has been designed, allowing compact packaging with a direct attachment of the chip connection pads to the flex using these interconnection technologies. This contribution shows the current state of our work towards a flexible, low material, dense and reliable packaging and modularization of pixel detectors., Comment: 5 pages + 1 page references,8 figures

Members of the CaK(Fe$_{1-x}$Cr$_{x}$)$_{4}$As$_{4}$ series have been synthesized by high-temperature solution growth in single crystalline form and characterized by X-ray diffraction, elemental analysis, magnetic and transport measurements. The effects of Cr substitution on the superconducting and magnetic ground states of CaKFe$_4$As$_4$ ($T_c$ = 35 K) have been studied. These measurements show that the superconducting transition temperature decreases monotonically and is finally suppressed below 1.8 K as $x$ is increased from 0 to 0.038. The magnetic transition temperature increases in a roughly linear manner as Cr substitution increases. A temperature-composition (\textit{T}-\textit{x}) phase diagram is constructed, revealing a half-dome of superconductivity with the magnetic transition temperature, $T^*$, appearing near 22~K for $x$ $\sim$ 0.017 and rising slowly up to 60~K for $x$ $\sim$ 0.077. The $T$-$x$ phase diagrams for CaK(Fe$_{1-x}$$T$$_{x}$)$_4$As$_4$ for $T$ = Cr and Mn are essentially the same despite the nominally different band filling; this is in marked contrast to $T$ = Co and Ni series for which the $T$-$x$ diagrams scale by a factor of two, consistent with the different changes in band filling Co and Ni would produce when replacing Fe. Superconductivity of CaK(Fe$_{1-x}$Cr$_{x}$)$_{4}$As$_{4}$ is also studied as a function of magnetic field. A clear change in $H^\prime_{c2}$($T$)/$T_c$, where $H^\prime_{c2}$($T$) is d$H_{c2}$($T$)/d$T$, at $x$ $\sim$ 0.012 is observed and probably is related to change of the Fermi surface due to magnetic order. Coherence length and the London penetration depths are also calculated based on $H_{c1}$ and $H_{c2}$ data. Coherence lengths as the function of $x$ also shows changes near $x$ = 0.012, again consistent with Fermi surfaces changes associated with the magnetic ordering seen for higher $x$-values., Comment: This work uses the same synthesis and measurements methods to systematicly analysis Cr1144 as our previous work arXiv:2204.10925 (existence of the text overlap) but gives the clear proof of the bi-modal response to electron and hole doping in Fe-based superconductors

Hybrid pixel detectors require a reliable and cost-effective interconnect technology adapted to the pitch and die sizes of the respective applications. During the ASIC and sensor R&D phase, and in general for small-scale applications, such interconnect technologies need to be suitable for the assembly of single-dies, typically available from Multi-Project-Wafer submissions. Within the CERN EP R&D programme and the AIDAinnova collaboration, innovative hybridisation concepts targeting vertex-detector applications at future colliders are under development. This contribution presents recent results of a newly developed in-house single-die interconnection process based on Anisotropic Conductive Film (ACF). The ACF interconnect technology replaces the solder bumps with conductive particles embedded in an adhesive film. The electro-mechanical connection between the sensor and the read-out chip is achieved via thermo-compression of the ACF using a flip-chip device bonder. A specific pad topology is required to enable the connection via conductive particles and create cavities into which excess epoxy can flow. This pixel-pad topology is achieved with an in-house Electroless Nickel Immersion Gold (ENIG) plating process that is also under development within the project. The ENIG and ACF processes are qualified with the Timepix3 ASIC and sensors, with 55 um pixel pitch and 14 um pad diameter. The ACF technology can also be used for ASIC-PCB/FPC integration, replacing wire bonding or large-pitch solder bumping techniques. This contribution introduces the ENIG plating and ACF processes and presents recent results on Timepix3 hybrid assemblies.

We studied the light yield of a pure polystyrene slide coated with wavelength-shifter molecules, coupled to a photomultiplier, using beta particles from a 90-Sr source, as a possible easy-to-build, low-cost plastic scintillator detector. Comparison measurements were performed with an uncoated polystyrene slide as well as with uncoated and coated PMMA slides, the latter which can only produce Cherenkov light when being traversed by charged particles. The results with the single (double) coated polystyrene slides show about 4.9 (6.3) times higher detected photon yield compared to the uncoated slide. For comparison, the light yield of a polystyrene-based extruded plastic scintillator material doped with PTP and POPOP was measured as well. The absolute detected light yield motivates future studies for developing easy-to-build, low-cost polystyrene-based plastic scintillator detectors., Comment: 20 pages, 13 figures

Members of the CaK(Fe$_{1-x}$Mn$_{x}$)$_{4}$As$_{4}$ series have been synthesized in single crystalline form and characterized by elemental analysis, thermodynamic and transport measurements. These measurements show that the superconducting transition temperature decreases monotonically and is finally suppressed below 1.8 K. For $x$-values greater than 0.016, signatures of a magnetic transition can be detected in both thermodynamic and transport measurements in which kink-like features allow for the determination of the transition temperature, $T^*$, that increases as Mn substitution increases. A temperature-composition ($T$-$x$) phase diagram is constructed, revealing a half-dome of superconductivity with the magnetic transition temperature, $T^*$, appearing near 26 K for $x$ $\sim$ 0.017 and rising slowly up to 33 K for $x$ $\sim$ 0.036. Specific heat data are used to track the jump in specific heat at $T_c$; The CaK(Fe$_{1-x}$Mn$_x$)$_4$As$_4$ data does not follow the scaling of $\Delta$$C_{p}$ with $T_{c}^3$ as many of the other Fe-based superconducting systems do. Elastoresistivity coefficients, $2m_{66}$ and $m_{11}-m_{12}$, as a function of temperature are also measured. $2m_{66}$ and $m_{11}-m_{12}$ are qualitatively similar to CaK(Fe$_{1-x}$Ni$_x$)$_4$As$_4$. This may indicate that the magnetic order in Mn substituted system may be still the same as CaK(Fe$_{1-x}$Ni$_x$)$_4$As$_4$. A clear change in $H^\prime_{c2}$($T$)/$T_c$, where $H^\prime_{c2}$($T$) is d$H_{c2}$($T$)/d$T$, at $x$ $\sim$ 0.015 is observed and probably is related to change of the Fermi surface due to magnetic order. Coherence lengths and the London penetration depths are also calculated based on $H_{c1}$ and $H_{c2}$ data. Coherence lengths as the function of $x$ also shows the changes near $x$ = 0.015., Comment: Fig. 16 a and b were corrected

Metastable defects can decisively influence the diode factor and thus the efficiency of a solar cell. The diode factor is also influenced by the doping level and the recombination mechanisms in the solar cell. Here we quantify how the various parameters change the diode factor by photoluminescence measurements and simulations. In addition, we show that backside recombination reduces the open circuit voltage in CuInSe2 solar cells by more than 40 mV. Passivation by a Ga gradient is shown to be as efficient as a passivation by dielectric layers. Increased backside recombination reduces the diode factor, not because of less metastable defect transformation but because of a sublinear increase in photo generated carriers with excitation. This reduction in diode factor is unwanted, since the increased recombination reduces the voltage. A higher doping level, on the other hand, reduces the diode factor, thereby increasing the fill factor, and at the same time increases the voltage.

We measured the surface tension of linear alkylbenzene (LAB) HYBLENE 113 mixed with Diphenyloxazole (PPO) as well as of pure LAB HYBLENE 113 as part of material studies for the liquid-scintillator based surround background tagger (SBT) in the proposed SHiP experiment. The measurement was performed using the iron wire method and the surface tension for linear alkyl benzene HYBLENE 113 plus PPO was found to be $(30.0\pm0.6)$ mN/m $22.0\pm 0.5$ {\deg}C and for pure HYBLENE 113, $(29.2\pm 0.6)$ mN/m at $21.0\pm 0.5$ {\deg}C., Comment: 4 pages, 1 figure

The past few decades have seen major developments in the design and operation of cryogenic particle detectors. This technology offers an extremely good energy resolution - comparable to semiconductor detectors - and a wide choice of target materials, making low temperature calorimetric detectors ideal for a variety of particle physics applications. Rare event searches have continued to require ever greater exposures, which has driven them to ever larger cryogenic detectors, with the CUORE experiment being the first to reach a tonne-scale, mK-cooled, experimental mass. CUORE, designed to search for neutrinoless double beta decay, has been operational since 2017 at a temperature of about 10 mK. This result has been attained by the use of an unprecedentedly large cryogenic infrastructure called the CUORE cryostat: conceived, designed and commissioned for this purpose. In this article the main characteristics and features of the cryogenic facility developed for the CUORE experiment are highlighted. A brief introduction of the evolution of the field and of the past cryogenic facilities are given. The motivation behind the design and development of the CUORE cryogenic facility is detailed as are the steps taken toward realization, commissioning, and operation of the CUORE cryostat. The major challenges overcome by the collaboration and the solutions implemented throughout the building of the cryogenic facility will be discussed along with the potential improvements for future facilities. The success of CUORE has opened the door to a new generation of large-scale cryogenic facilities in numerous fields of science. Broader implications of the incredible feat achieved by the CUORE collaboration on the future cryogenic facilities in various fields ranging from neutrino and dark matter experiments to quantum computing will be examined., Comment: 45 pages, 14 figures

In massive objects, such as galaxy clusters, the turbulent velocity dispersion, $\sigma_\mathrm{turb}$, is tightly correlated to both the object mass, $M$, and the thermal energy. Here, we investigate whether these scaling laws extend to lower-mass objects in dark-matter filaments. We perform a cosmological zoom-in simulation of a filament using an adaptive filtering technique for the resolved velocity component and a subgrid-scale model to account for the unresolved component. We then compute the mean turbulent and thermal energies for all halos in the zoom-in region and compare different definitions of halo averages. Averaging constrained by density and temperature thresholds is favored over averages solely based on virial spheres. We find no clear trend for the turbulent velocity dispersion versus halo mass, but significant correlation and a scaling law with exponent $\alpha\sim 0.5$ between the turbulent velocity dispersion and thermal energy that agrees with a nearly constant turbulent Mach number, similar to more massive objects. We conclude that the self-similar energetics proposed for galaxy clusters extends down to the CGM of individual galaxies., Comment: 12 pages, 11 figures, submitted to Astronomy and Astrophysics

Pattern formation is a ubiquitous phenomenon observed in nonlinear and out-of-equilibrium systems. In equilibrium, quantum ferrofluids formed from ultracold atoms were recently shown to spontaneously develop coherent density patterns, manifesting a supersolid. We theoretically investigate the phase diagram of such quantum ferrofluids in oblate trap geometries and find an even wider range of exotic states of matter. Two-dimensional supersolid crystals formed from individual ferrofluid quantum droplets dominate the phase diagram at low densities. For higher densities we find honeycomb and labyrinthine states, as well as a pumpkin phase. We discuss scaling relations which allow us to find these phases for a wide variety of trap geometries, interaction strengths, and atom numbers. Our study illuminates the origin of the various possible patterns of quantum ferrofluids and shows that their occurrence is generic of strongly dipolar interacting systems stabilized by beyond mean-field effects., Comment: 16 pages, 5+2 figures

Under the term global blockage, the cumulative induction of wind turbines in a wind farm has been recently suspected to be responsible for observed overestimations of the energy yield in large-size wind farms. In this paper, the practice of modeling this effect after linear superposition of single turbine inductions, calculated with three of the most recent analytic models, is compared to Large-Eddy-Simulations of wind farms. We compare the models across two different farms, composed of 9 and 49 turbines, with two different heights of the atmospheric boundary layer, 300 and 500 m. The results show hat the differences between the analytical models are negligible while they substantially differ from the LES results. The linear superposition of induction consistently underestimates the velocity deficit in front of the farm with an error that increases as the wind farm size grows and the ABL height decreases. Also, when calculating the power output at the turbines of the farm, all the analytical models considered do not agree with the LES. These comparisons reveal that the farm interactions with the atmospheric boundary layer may highly outclass the turbine induction in determining the extent of the global blockage effect. Therefore, we present a first dimensional approach to the problem based on LES, aimed at simplifying its characterization., Comment: Preprint submitted to "Wake conference 2021", IOP Publishing, Journal of physics:conference series

We theoretically investigate the ground states and the spectrum of elementary excitations across the superfluid to droplet crystallization transition of an oblate dipolar Bose-Einstein condensate. We systematically identify regimes where spontaneous rotational symmetry breaking leads to the emergence of a supersolid phase with characteristic collective excitations, such as the Higgs amplitude mode. Furthermore, we study the dynamics across the transition and show how these supersolids can be realized with standard protocols in state-of-the-art experiments., Comment: 10 pages, 2+1 figures

The ability to engineer quantum-cascade-lasers (QCLs) with ultrabroad gain spectra and with a full compensation of the group velocity dispersion, at Terahertz (THz) frequencies, is a fundamental need for devising monolithic and miniaturized optical frequency-comb-synthesizers (FCS) in the far-infrared. In a THz QCL four-wave mixing, driven by the intrinsic third-order susceptibility of the intersubband gain medium, self-lock the optical modes in phase, allowing stable comb operation, albeit over a restricted dynamic range (~ 20% of the laser operational range). Here, we engineer miniaturized THz FCSs comprising a heterogeneous THz QCL integrated with a tightly-coupled on-chip solution-processed graphene saturable-absorber reflector that preserves phase-coherence between lasing modes even when four-wave mixing no longer provides dispersion compensation. This enables a high-power (8 mW) FCS with over 90 optical modes to be demonstrated, over more than 55% of the laser operational range. Furthermore, stable injection-locking is showed, paving the way to impact a number of key applications, including high-precision tuneable broadband-spectroscopy and quantum-metrology., Comment: 31 pages, 11 figures, to be published in ACS Photonics

Phase transitions share the universal feature of enhanced fluctuations near the transition point. Here we show that density fluctuations reveal how a Bose-Einstein condensate of dipolar atoms spontaneously breaks its translation symmetry and enters the supersolid state of matter -- a phase that combines superfluidity with crystalline order. We report on the first direct in situ measurement of density fluctuations across the superfluid-supersolid phase transition. This allows us to introduce a general and straightforward way to extract the static structure factor, estimate the spectrum of elementary excitations and image the dominant fluctuation patterns. We observe a strong response in the static structure factor and infer a distinct roton minimum in the dispersion relation. Furthermore, we show that the characteristic fluctuations correspond to elementary excitations such as the roton modes, which have been theoretically predicted to be dominant at the quantum critical point, and that the supersolid state supports both superfluid as well as crystal phonons., Comment: 11 pages, 5 + 3 figures

We present the results of a four-month, spectroscopic campaign of the Wolf-Rayet dust-making binary, WR137. We detect only small-amplitude, random variability in the CIII5696 emission line and its integrated quantities (radial velocity, equivalent width, skewness, kurtosis) that can be explained by stochastic clumps in the wind of the WC star. We find no evidence of large-scale, periodic variations often associated with Corotating Interaction Regions that could have explained the observed intrinsic continuum polarization of this star. Our moderately high-resolution and high signal-to-noise average Keck spectrum shows narrow double-peak emission profiles in the Halpha, Hbeta, Hgamma, HeII6678 and HeII5876 lines. These peaks have a stable blue-to-red intensity ratio with a mean of 0.997 and a root-mean-square of 0.004, commensurate with the noise level; no variability is found during the entire observing period. We suggest that these profiles arise in a decretion disk around the O9 companion, which is thus an O9e star. The characteristics of the profiles are compatible with those of other Be/Oe stars. The presence of this disk can explain the constant component of the continuum polarization of this system, for which the angle is perpendicular to the plane of the orbit, implying that the rotation axis of the O9e star is aligned with that of the orbit. It remains to be explained why the disk is so stable within the strong ultraviolet radiation field of the O star. We present a binary evolutionary scenario that is compatible with the current stellar and system parameters., Comment: 12 pages, 5 Figures

We report the trapping of ultracold neutral $ \text{Rb}$ atoms and $ \text{Ba}^+ $ ions in a common optical potential in absence of any radiofrequency (RF) fields. We prepare $ \text{Ba}^+ $ at $ 370 ~ \mu K $ and demonstrate efficient sympathetic cooling by $100 ~ \mu K $ after one collision. Our approach is currently limited by the $ \text{Rb}$ density and related three-body losses, but it overcomes the fundamental limitation in RF traps set by RF-driven, micromotion-induced heating. It is applicable to a wide range of ion-atom species, and may enable novel ultracold chemistry experiments and complex many-body dynamics.

Using a refined setup process, we simulated the propagation of six observed Coronal Mass Ejections (CMEs) with the 2012 Block-Adaptive-Tree-Solarwind-Roe-Upwind-Scheme (BATS-R-US) code from the Sun to the Earth or STEREO A and compared the outputs with observations. A linear relation between the average CME speed below 6 solar radii and the flux rope current is demonstrated and used to tune the simulations. The simulations correctly predict if and when an observable CME shock reaches one astronomical unit (AU). The arrival time predictions of the CME shocks at 1 AU have an accuracy of 0.9 $\pm$ 1.9 hours. The simulated initial CME speeds and average accelerations are close to the model and data of Gopalswamy et al., 2000. The approach shows promise for predicting the sense of the predominant shock-associated change in the magnetic field component $B_z$. However, the magnetic fields and plasma conditions in the solar wind and CME are not predicted well quantitatively.

Evidence of nematic effects in the mixed superconducting phase of slightly underdoped $\text{Ba}(\text{Fe}_{1-x}\text{Co}_x)_2\text{As}_2$ is reported. We have found strong in-plane resistivity anisotropy for crystals in different strain conditions. For these compositions, there is no magnetic long range order, so the description may be ascribed to the interplay between the superconducting and nematic order parameters. A piezoelectric-based apparatus is used to apply tensile or compressive strain to tune nematic domain orientation in order to examine intrinsic nematicity. Measurements are done under a rotating magnetic field and the analysis of the angular dependence of physical quantities identifies the cases in which the sample is {\em detwinned}. Furthermore, the angular dependence of the data allows us to evaluate the effects of nematicity on the in-plane superconductor stiffness. Our results show that although nematicity contributes in a decisive way in the conduction properties, its contributions to the anisotropy properties of the stiffness of the superconducting order parameter is not as significant in these samples., Comment: 9 pages, 9 figures. Published in Phys. Rev. B on 28 February 2019