Search

Creating high surface area nanocatalysts that contain stacking faults is a promising strategy to improve catalytic activity. Stacking faults can tune the reactivity of the active sites, leading to improved catalytic performance. The formation of branched metal nanoparticles with control of the stacking fault density is synthetically challenging. In this work, we demonstrate that varying the branch width by altering the size of the seed that the branch grows off is an effective method to precisely tune the stacking fault density in branched Ni nanoparticles. A high density of stacking faults across the Ni branches was found to lower the energy barrier for Ni2+/Ni3+ oxidation and result in enhanced activity for electrocatalytic oxidation of 5-hydroxylmethylfurfural. These results show the ability to synthetically control the stacking fault density in branched nanoparticles as a basis for enhanced catalytic activity.

Single Pt atom catalysts are key targets because a high exposure of Pt substantially enhances electrocatalytic activity. In addition, PtRu alloy nanoparticles are the most active catalysts for the methanol oxidation reaction. To combine the exceptional activity of single Pt atom catalysts with an active Ru support we must overcome the synthetic challenge of forming single Pt atoms on noble metal nanoparticles. Here we demonstrate a process that grows and spreads Pt islands on Ru branched nanoparticles to create single-Pt-atom-on-Ru catalysts. By following the spreading process by in situ TEM, we found that the formation of a stable single atom structure is thermodynamically driven by the formation of strong Pt–Ru bonds and the lowering of the surface energy of the Pt islands. The stability of the single-Pt-atom-on-Ru structure and its resilience to CO poisoning result in a high current density and mass activity for the methanol oxidation reaction over time. [Figure not available: see fulltext.]

Green microalgae are gaining attention in the renewable energy field due to their ability to convert light into energy in biophotovoltaic (BPV) cells. The poor exogenous electron transfer kinetics of such microorganisms requires the use of redox mediators to improve the performance of related biodevices. Redox polymers are advantageous in the development of subcellular-based BPV devices by providing an improved electron transfer while simultaneously serving as immobilization matrix. However, these surface-confined redox mediators have been rarely used in microorganism-based BPVs. Since electron transfer relies on the proximity between cells and the redox centres at the polymer matrix, the development of molecularly tailored surfaces is of great significance to fabricate more efficient BPV cells. We propose a bioanode integrating Chlorella vulgaris embedded in an Os complex-modified redox polymer. Chlorella vulgaris cells are functionalized with 3-aminophenylboronic acid that exhibits high affinity to saccharides in the cell wall as a basis for an improved integration with the redox polymer. Maximum photocurrents of (5 ± 1) µA cm−2 are achieved. The developed bioanode is further coupled to a bilirubin oxidase-based biocathode for a proof-of-concept BPV cell. The obtained results encourage the optimization of electron-transfer pathways toward the development of advanced microalgae-based biophotovoltaic devices.

The direct growth of Pt islands on lattice mismatched Ni nanoparticles is a major synthetic challenge and a promising strategy to create highly strained Pt atoms for electrocatalysis. By using very mild reaction conditions, Pt islands with tunable strain were formed directly on Ni branched particles. The highly strained 1.9 nm Pt-island on branched Ni nanoparticles exhibited high specific activity and the highest mass activity for hydrogen evolution (HER) in a pH 13 electrolyte. These results show the ability to synthetically tune the size of the Pt islands to control the strain to give higher HER activity.

Enzymes can perform complex multistep cascade reactions by linking multiple distinct catalytic sites via substrate channeling. We mimic this feature in a generalized approach with an electrocatalytic nanoparticle for the carbon dioxide reduction reaction comprising a Ag core surrounded by a porous Cu shell, providing different active sites in nanoconfined volumes. The architecture of the nanozyme provides the basis for a cascade reaction, which promotes C-C coupling reactions. The first step occurs on the Ag core, and the subsequent steps on the porous copper shell, where a sufficiently high CO concentration due to the nanoconfinement facilitates C-C bond formation. The architecture yields the formation of n-propanol and propionaldehyde at potentials as low as-0.6 V vs RHE.

There is intense interest in quantifying the levels of microRNA because of its importance as a blood-borne biomarker. The challenge has been to develop methods that can monitor microRNA expression both over broad concentration ranges and in ultralow amounts directly in a patient’s blood. Here, we show that, through electric-field-induced reconfiguration of a network of gold-coated magnetic nanoparticles modified by probe DNA (DNA–Au@MNPs), it is possible to create a highly sensitive sensor for direct analysis of nucleic acids in samples as complex as whole blood. The sensor is the first to be able to detect concentrations of microRNA from 10 aM to 1 nM in unprocessed blood samples. It can distinguish small variations in microRNA concentrations in blood samples of mice with growing tumours. The ultrasensitive and direct detection of microRNA using an electrically reconfigurable DNA–Au@MNPs network makes the reported device a promising tool for cancer diagnostics.

Enzymes are characterized by an active site that is typically embedded deeply within the protein shell thus creating a nanoconfined reaction volume in which high turnover rates occur. We propose nanoparticles with etched substrate channels as a simplified enzyme mimic, denominated nanozymes, for electrocatalysis. We demonstrate increased electrocatalytic activity for the oxygen reduction reaction using PtNi nanoparticles with isolated substrate channels. The PtNi nanoparticles comprise an oleylamine capping layer that blocks the external surface of the nanoparticles participating in the catalytic reaction. Oxygen reduction mainly occurs within the etched channels providing a nanoconfined reaction volume different from the bulk electrolyte conditions. The oxygen reduction reaction activity normalized by the electrochemically active surface area is enhanced by a factor of 3.3 for the nanozymes compared to the unetched nanoparticles and a factor of 2.1 compared to mesoporous PtNi nanoparticles that possess interconnecting pores.

The results of testing a new enzyme, anionic tobacco peroxidase (TOP), in various amperometric biosensors are summarized. The biochemical and electrochemical properties of the enzyme are briefly characterized. As compared to the commonly used cationic peroxidase from horseradish roots, TOP exhibits a wider optimum stability pH range, higher stability to inactivation with hydrogen peroxide, and higher efficiency in direct electron-transfer processes. The enzyme immobilized by adsorption on graphite is effective in determining aminophenols and aromatic diamines under flow conditions with a detection limit of 10 nM. Upon immobilization on graphite by incorporation into a get of a redox-active polymer (crosslinked polyvinylimidazole with osmium 4,4'-dimethylbipyridinium chloride), TOP exhibited sensitivity and stability comparable to those of horseradish peroxidase and a wider linearity range. Upon immobilization on a self-assembled thiol monolayer at a gold electrode, TOP was much superior to horseradish peroxidase in the sensitivity of determining hydrogen peroxide, regardless of the charge of the monolayer. Prospects for the further use of the native enzyme and its genetically engineered unglycosylated form are considered.