Search

Purpose: To evaluate interfacial gap and fracture resistance of endodontically treated maxillary premolars, restored with different glass-fiber reinforced materials. Materials and Methods: Eighty-four extracted intact premolars were endodontically treated and MOD cavities prepared. Specimens were divided into 7 groups (n = 12 for each) as follows: sound teeth (G1); no restoration (G2); direct composite restoration with fiber-reinforced composite (everX Posterior GC) (G3); direct composite restoration (Filtek Supreme XTE, 3M Oral Care; "FSXTE") (G4); a horizontal layer of high-viscosity flowable composite (G-aenial Flow, GC) was placed on the pulp chamber floor, 10 mm x 3 mm glass fibers (everStick NET, GC) were inserted into the cavity (G5); same procedure as in group 5 except the direct restoration was made incrementally with FSXTE (3M Oral Care) (G6); composite overlays were placed (G7). Specimens were scanned with micro-CT to evaluate 3D interfacial gaps before and after chewing simulation using Mimics software to calculate voids between restoration and tooth (dentin and enamel). These data (in mm3) were collected for statistical analysis. Thereafter, specimens were loaded to fracture using a universal testing machine. Maximum breaking loads were recorded in Newton (N). The data obtained were analyzed using two-way ANOVA and post-hoc Tukey's test (p < 0.05). Results: ANOVA showed that horizontal glass-fiber insertions statistically significantly reduced interfacial gaps after chewing simulation. No differences in fracture resistance were found between Filtek Supreme XTE and everX Posterior; moreover, glass-fiber insertion did not significantly improve fracture resistance in either case. Composite overlays achieved significantly better fracture toughness than did direct restorations. Conclusions: For the direct restoration of endodontically treated premolars, the insertion of glass fibers into direct composite restorations was unable to guarantee a significant increase in the fracture resistance or a significant change in the fracture pattern. However, it significantly reduced interfacial gap volume after cycling fatigue.

To three-dimensionally evaluate the interfacial gap of bulk-fill resin composites applied in deep Class-I restorations with different layering techniques and curing modes.Ninety-six (n = 96) samples were prepared with standardized deep Class-I cavities and adhesive procedures. Four materials were tested: SDR (SDR), SonicFill2 (SF), Admira Fusion X-Tra (AFXT), Filtek Supreme XTE (FS). Four subgroups (n = 6) were created according to layering and curing techniques: 2+2mm increments with soft start curing (SG1), 2+2 mm with conventional curing (SG2), a 4-mm increment with soft start curing (SG3), a 4-mm increment with conventional curing (SG4). All samples underwent micro-CT scans; afterwards, voids surrounding the restorations automatically underwent a thresholding procedure (Mimics, Materialise; Geomagic Studio 12, 3D Systems) to analyze the 3D interfacial gap. Statistical analysis was performed using three-way ANOVA with Tukey's test (significance p0.05).Statistically significant differences were reported between materials, layering techniques and their interaction. No statistically significant differences were reported for polymerisation mode. Bulk-fill materials showed average interfacial gap volumes ranging from 0.031 mm3 to 0.200 mm3, while FS showed volumes ranging from 0.416 mm3 to 1200 mm3.All bulk-fill materials performed statistically significantly better than did FS (p0.05), with no statistically significant differences between them. Curing mode did not influence interfacial gap volume in any group (p0.05), while bulk-filling vs layering influenced the volume of interfacial gaps only in the FS group, which performied better when incrementally applied. Regarding gap localisation, the floor of the cavity was the area with the highest likelihood of gaps in all samples.

Purpose: The management of complicated crown-root fractures is challenging for endodontic restoration. The present case describes a patient who sustained trauma to the maxillary right central incisor. Materials and Methods: Clinical and radiographic examination showed a complicated crown-root fracture and incomplete root development with periapical radiolucency and inadequate endodontic treatment with overfilling. Orthograde retreatment with MTA apical closure combined with a microsurgical approach to remove of extruded material was performed. Coronal sealing was accomplished with a direct adhesive restoration and marginal relocation. Results: A 5-year follow-up showed complete healing of the periapical lesion and correct preservation of function and esthetic parameters. Conclusion: A modern minimally invasive treatment protocol allows the maximum conservation of residual dental tissues.

Aim: Apical periodontitis (AP) is correlated with a higher risk of developing cardiovascular disease (CVD). No data currently exist to suggest that endothelial dysfunction (ED) improves after endodontic treatment in patients who have AP, despite a link between chronic AP and ED. This study was designed to investigate the expression of early ED markers in young adults with chronic AP, before and after root canal treatment. Methodology: 41 subjects (20 controls and 21 patients with AP) were examined at enrolment. Patients with AP were also assessed 2 and 12 months after treatment. ENDO-PAT was used to measure endothelial flow reserve (EFR) and ELISAs were used to assess plasma levels of interleukin (IL)-1, IL-6 and TNF-alpha, vasoconstrictor ED endothelin (ET)-1, the circulating endothelial adhesion markers intercellular adhesion molecule-1 (ICAM)-1/ CD54 and soluble vascular cellular adhesion molecule-1 (sVCAM)-1/CD106, soluble CD14, and the endothelial leukocyte adhesion molecule E-selectin. Results: Baseline serum levels of ET-1, ICAM-1, E-selectin, IL-1, and sCD14 were elevated in patients with AP compared to the control group. There was no macroscopic evidence of reduced EFR in either group. Treatment for AP was associated with reduced inflammation and improved early ED, indicated by a lowering of IL-1, sCD14, ET-1, ICAM-1/ CD54 and E-selectin levels to resemble those of control subjects. Conclusions: Early vascular ED may be driven by AP but is reversible with effective endodontic treatment.

Purpose: To evaluate the immediate and aged bond strength and interfacial nanolaekage of different adhesives and protocols on dental elements prepared with diamond burs and Er:YAG laser. Materials and Methods: Forty molar crowns were flattened and a standardized smear layer was created. Teeth were divided into two main groups according to the dentin cutting technique: 1. Er:YAG laser for 30 s at 30 Hz repetition rate, 250 mJ energy per pulse, and water spray irrigation set at level 8; and 2. diamond bur. Each group was then divided into subgroups according to the adhesive protocol: SG1: dentin etching for 15 s followed by universal adhesive application (All Bond Universal, Bisco); SG2: universal adhesive application (All Bond Universal); SG3: two-step self-etch adhesive application (Clearfil SE Bond 2, Kuraray Noritake); SG4: etching followed by 3-step etch-and-rinse adhesive application (Optibond FL, Kerr). After curing the adhesives, resin composite buildups of 4 mm were made and specimens were sectioned to obtain 1-mm-thick sticks in accordance with the μTBS test technique. Sticks were stressed to failure at baseline and after 6 months of storage in artificial saliva. Three teeth per group were prepared for nanoleakage interfacial analyses. Data were statistically analyzed with three-way ANOVA and Tukey's post-hoc test (p < 0.05). Results: A significant difference in bond strengths was found for treatment, aging, and adhesive protocol. Nanoleak age analysis showed higher marginal infiltration in Er:YAG-treated groups both at baseline and after aging. Conclusions: Surfaces prepared with diamond burs presented higher bond strengths than did those prepared with Er:YAG laser. Adhesive protocols and aging could influence the adhesive-dentin interface. Further studies are necessary to validate the results obtained.

Introduction: The aim of this micro-CT study was to analyze the geometrical shaping outcomes after instrumentation with rotary and reciprocating glide path and shaping systems. Materials and Methods: The mesio-buccal canals of thirty extracted maxillary first permanent molars were randomized into two groups (n=15): rotary system ProGlider and ProTaper Next X1, X2 (PG-PTN) was compared with reciprocating system WaveOne Gold Glider and WaveOne Gold Primary (WOGG-WOG). Irrigation was performed with EDTA 10% and NaOCl 5%. Specimens were micro-CT scanned before instrumentation and after glide path and shaping. The measured parameters were the increase in canal volume and surface area, the centroid shift and the canal geometry variation through RDR and RA. These parameters were measured in the apical and coronal levels and at the point of maximum curvature. One-way ANOVA and post hoc Turkey-Kramer tests were used to describe the impact of the instrumentation on the selected parameters (P

no abstract

The accessibility and use of natural genetic variability in crops is essential for the management of genetic resources and the establishment of innovative breeding programs. Nuclear whole-genome sequences of several cultivated and wild peppers have been recently generated in order to provide crucial information on the evolution, domestication and divergence of pepper species (Capsicum spp.). Despite next generation sequencing (NGS) technologies providing a significant advance in generation of high throughput data, the analysis of a large-scale data and of individuals is still a challenging task. An alternative strategy to Whole Genome Sequencing is to generate a reduced representation of the genome using target enrichment strategies. Among them, genotyping-by-sequencing (GBS) provides a rapid, highly informative, cost-effective tool for exploring genetic diversity on a genome-wide scale. We applied GBS for SNP marker discovery in nuclear genomes and population structure analysis in a collection of cultivated and domesticated peppers. Information generated in this study represents a first step towards future genome-wide association mapping studies and marker-assisted selection programs. In addition, results from this analysis can be used to gain a better understanding of the genetic relationships within the Capsicum genus. In order to provide a further contribution to that issue, we also determined the complete chloroplast DNA (cpDNA) sequence of 11 Capsicum accessions for a total of 8 species generally included in the C. annuum (7), C. baccatum (3) or C. pubescens/eximium complex (1). We performed comparative analysis and identified potential molecular markers able to discriminate among Capsicum species.