Search

Understanding the interfaces of layered nanostructures is key to optimizing their structural and magnetic properties for the desired functionality. In the present work, the two interfaces of a few nm thick Fe layer in Ag-57Fe-Ag trilayers are studied with a depth resolution of a fraction of a nanometer using x-ray standing waves (XSWs) generated by an underlying [W-Si]x10 multilayer (MLT) at an x-ray incident angle around the Bragg peak of the MLT. Interface selectivity in Ag-57Fe-Ag trilayers was achieved by moving XSW antinodes across the interfaces by optimizing suitable incident angles and performing depth-resolved nuclear resonance scattering (NRS) and X-ray fluorescence (XRF) measurements for magnetic and structural properties. The combined analysis revealed that the rms roughness of 57Fe-on-Ag and Ag-on-57Fe interfaces are not equal. The roughness of the 57Fe-on-Ag interface is 10 Angstrom, while that of the Ag-on-57Fe interface is 6 Angstrom. 57Fe isotope sensitive NRS revealed that hyperfine field (HFF) at both interfaces of 57Fe-on-Ag and Ag-on-57Fe interfaces are distinct, which is consistent with the difference in interface roughnesses measured as root mean square (RMS) roughness. Thermal annealing induces 57Fe diffusion into the Ag layer, and annealing at 325 C transforms the sample into a paramagnetic state. This behavior is attributed to forming 57Fe nanoparticles within the Ag matrix, exhibiting a paramagnetic nature. These findings provide deep insights into interface properties crucial for developing advanced nanostructures and spintronic devices., Comment: 17 pages, 5 figures

In the present work, spin orientation and variation of the strength of coupling in [Co/Pt]ML/Fe multilayer have been investigated as a function of the thickness of the Fe layer. [Co/Pt]ML/Fe multilayer has orthogonal anisotropy with the Fe layer, and [Co/Pt]ML has in-plane magnetic anisotropy and perpendicular anisotropy, respectively. Measurements are performed using in-situ magneto-optical Kerr effect (MOKE) and isotope-sensitive depth-resolved nuclear resonance scattering (NRS) technique. Real-time in-situ MOKE measurement during Fe growth reveals that with an increase in thickness of the Fe layer, moments of Fe layer reorientation from out of the plane to in-plane direction. This is attributed to the decrease in the coupling between the [Co/Pt]ML and Fe layer. For the depth-dependent study, two [Co/Pt]ML/Fe multilayers having the same thickness but different positions of the Fe57 marker layer ([Co/Pt]MLFe/Fe57) and [Co/Pt]MLFe57/Fe ) were studied using the NRS technique. Films with varying external magnetic fields were also studied to investigate coupling strength. Measurements were performed under the x-ray standing wave conditions to enhance resonance yield. It is observed that for the 75 {\AA} Fe in [Co/Pt]ML/Fe multilayer, the coupling varies along the depth of the Fe layer. The coupling is strong at [Co/Pt]ML and Fe interface with spins of the Fe layer aligned in the out-of-plane direction, whereas moments away from the interface are weakly coupled and aligned in-plane along the magnetic easy axis. Due to this gradient in strength of coupling along the depth, a large magnetic field is required to reorient spins at the interface along the magnetic hard axis of the Fe layer; however, spins away from the interface can rotate freely even in the low magnetic field., Comment: 15 pages, 7 figures

CoSb3, a skutterudite compound, is key in studying thermoelectric materials. Under compression, it undergoes a 'self-insertion' isostructural transition, redistributing large Sb atoms among crystallographic sites. We investigated CoSb3's structural stability up to 70 GPa using single crystal X-ray diffraction and high-resolution X-ray scattering, including Bragg Coherent Diffraction Imaging. We examined the material in three pressure transmitting media (PTMs), exploring how PTMs and nonhydrostatic stresses affect CoSb3. Notably, the 'self-insertion' transition may reduce or even make compressibility negative. Additionally, we report a previously unknown phase transformation from cubic Im-3 to trigonal R-3 above 40 GPa and discuss the phases' distinctive behaviors., Comment: Manuscript: 27 pages, 12 Figures

A readout system based on the Timepix4 ASIC, is being developed for photon science. The TEMPUS detector can be operated in two distinct modes: a photon counting mode, which allows for conventional full-frame readout at rates up to 40 kfps; and an event-driven time-stamping mode, which allows excellent time resolution in the nanosecond regime in measurements with moderate X-ray flux. In this paper, we introduce the initial prototype, a single-chip system, and present the first results obtained at PETRA III and ESRF., Comment: 19 pages, 6 figures

M\"ossbauer nuclei constitute exceptionally clean quantum-optical systems with transitions in the hard x-ray energy range, which, placed in x-ray waveguides, are a uniquely capable platform to study collective radiative effects in waveguide quantum electrodynamics (QED). In this work, we design and demonstrate the so-far unexplored nuclear resonant x-ray propagation in thin-film waveguides coupled in forward incidence, resolving excitation and collective evolution of M\"ossbauer nuclei in both time and position. To describe the effects of geometry on propagation and collective evolution, we present a unifying theoretical model. Our findings not only open up a new design space for experiments in nuclear resonant scattering and nuclear quantum optics, but also demonstrate a nanometer-sized x-ray source with extreme temporal and spatial coherence. %which previously were limited to either unstructured foil samples or translation-invariant reflectivity and diffraction configurations. This gives access to a new regime of waveguide QED with hard x-rays and furthermore paves a new route to coherent spectro-microscopic investigations at the nanoscale.

Interfaces in the MgO-FeCoB-MgO trilayer have been studied with grazing incident nuclear resonance scattering (GINRS) using the x-ray standing waves (XSW) technique. High depth selectivity of the present method allows one to measure magnetism and structure at the two interfaces of FeCoB, namely, FeCoB-on-MgO and MgO-on-FeCoB, independently, yielding an intriguing result that both interfaces are not symmetric. A high-density layer with an increased magnetic hyperfine field at the FeCoB-on-MgO interface suggests different growth mechanisms at the two interfaces. The azimuthal angle-dependent magneto-optic Kerr effect measurements reveal the presence of unusual uniaxial magnetic anisotropy (UMA) in the trilayer. An in-situ temperature-dependent study discovered that this UMA systematically reduces with temperature. The trilayer becomes isotropic at 450C with an order-of-magnitude increase in coercivity. The asymmetry at the interfaces is, in turn, explained by boron diffusion from the FeCoB interface layer into the nearby MgO layer. Stress-induced UMA is observed in the boron-deficient FeCoB layer, superimposed with the bulk FeCoB layer, and found to be responsible for unusual UMA. The temperature-dependent variation in the UMA and coercivity can be understood in terms of variations in the internal stresses and coupling between FeCoB bulk and the interface layer.

Magnetization reversal of soft ferromagnetic Fe layer, coupled to [Co/Pt]ML multilayer [ML] with perpendicular magnetic anisotropy (PMA), has been studied in-situ with an aim to understand the origin of exchange bias (EB) in orthogonal magnetic anisotropic systems. The interface remanant state of the ML is modified by magnetic field annealing, and the effect of the same on the soft Fe layer is monitored using the in-situ magneto-optical Kerr effect (MOKE). A considerable shift in the Fe layer hysteresis loop from the centre and an unusual increase in the coercivity, similar to exchange bias phenomena, is attributed to the exchange coupling at the [Co/Pt]ML and Fe interface. The effect of the coupling on spin orientation at the interface is further explored precisely by performing an isotope selective grazing incident nuclear resonance scattering (GINRS) technique. Here, the interface selectivity is achieved by introducing a 2 nm thick Fe57 marker between [Co/Pt]ML and Fe layers. Interface sensitivity is further enhanced by performing measurements under the x-ray standing wave conditions. The combined MOKE and GINRS analysis revealed the unidirectional pinning of the Fe layer due to the net in-plane magnetic spin at the interface caused by magnetic field annealing. Unidirectional exchange coupling or pinning at the interface, which may be due to the formation of asymmetrical closure domains, is found responsible for the origin of EB with an unusual increase in coercivity., Comment: 9 figures, 1 table

We report the structural and magnetic properties of four-layer Aurivillius compound Bi$_5$FeTi$_3$O$_{15}$ (BFTO) at high hydrostatic pressure conditions. The high-pressure XRD data does not explicitly show structural phase transitions with hydrostatic pressure, however the observed changes in lattice parameters indicate structural modifications at different pressure values. In the initial pressure region values, the lattice parameters $\textit{a}$- and $\textit{b}$- are nearly equal implying a quasi-tetragonal structure, however as the pressure increases $\textit{a}$- and $\textit{b}$- diverges apart and exhibits complete orthorhombic phase at pressure values of about $\geq$8 GPa. Principal component analysis of high pressure Raman measurements point out an evident change in the local structure at about 5.5 GPa indicating that the evolution of the local structure under applied pressure seems to not follow crystallographic changes (long range order). Nuclear forward scattering (NFS) measurement reveal the development of magnetic ordering in BFTO at 5K with high pressures. A progressive increase in magnetic order is observed with increase in pressure at 5K. Further, NFS measurements carried out at constant pressure (6.4GPa) and different temperatures indicate that the developed magnetism disappears at higher temperatures (20K). It is attempted to explain these observations in terms of the observed structural parameter variation with pressure., Comment: 8 pages, 5 figures

We report on the development and characterization of a medium resolution monochromator for synchrotron-based hyperfine spectroscopy at the 73 keV nuclear resonance of 193-Ir. The device provides high throughput of 6*10^8 ph/s in an energy bandwidth of 300(20) meV. We excited the nuclear resonance in 193-Ir at 73.04 keV and observed nuclear fluorescence of 193-Ir in Iridium metal. The monochromator allows for Nuclear Forward Scattering spectroscopy on Ir and its compounds.