Search

One challenge for geotechnical centrifuge testing of soil–structure interaction problems is the reliable measurement of induced structural strains/forces. This paper presents a novel application of fibre Bragg grating (FBG) sensors for strain measurement within geotechnical centrifuge tests. FBG sensors have several advantages for centrifuge testing, in particular their small size and minimal self-weight. This paper gives an overview of recently developed installation and calibration procedures for FBG sensors within buried centrifuge model structures. The effect of thermal expansion/contraction of the materials (including both the fibre and structures) is considered and assessed. The precision and reliability of the FBG sensors are demonstrated using verification tests. The application of the FBG sensors is considered for two geotechnical problems, namely, pile jacking and a ‘retaining wall’ adjacent to a tunnel (acting as a protective wall to prevent an adjacent structure from tunnelling-induced ground movement). The results demonstrate that the FBG sensors can provide reliable measurements of pile axial strains/forces and protective wall bending moments. The paper provides evidence to support the routine adoption of FBG sensors for strain/force measurement of structures in geotechnical centrifuge modelling.

An optical fibre ammonia gas sensor utilising a functionalised four-leaf-clover-shaped suspended-core fibre (SCF) is demonstrated. The fibre is functionalised by depositing a thin layer of an ammonia sensitive dye (tetraphenylporphyrin tetrasulfonic acid hydrate) (TPPS) on the wall of the inner cavities of the SCF through capillary action. An in-line fibre sensing structure is designed for light transmission through the SCF and also allows gas exchange with the atmosphere through two porous polyethylene housings. The sensing structure exhibits a temperature-dependent transmission due to the thermal expansion of the housings. A ratiometric method is applied for signal processing which is demonstrated to reduce significantly the effect of temperature change in the tested range (20-30 °C). The sensor is tested in ammonia concentration ranges from 0-10 ppm and demonstrates capability of detecting ammonia at ppb levels. The minimum tested concentration is 150 ppb in the experiment with a calculated limit of detection of 20 ppb. The sensor response time (T10-90%) is 160 s and it is demonstrated to be reusable after treatment with hydrogen chloride vapour. Numerical simulation of evanescent absorption features of such an SCF indicates that approximately 0.02% of the optical power exists in the air holes for the fundamental propagation mode. Distinctive absorption bands observed in the transmission spectrum of the fabricated sensor can also be observed in the simulated model after adding the TPPS absorption layer in the holes.

Ammonia (NH3) and carbon dioxide (CO2) are important breath biomarkers for diagnosis of renal and respiratory diseases. Simultaneous sensing of the two gases is useful for assessment of Helicobacter Pylori infection. This article introduces a multi-parameter optical fibre sensor by coating two different dyes, i.e., thymol blue and tetraphenylporphyrin tetrasulfonic acid hydrate (TPPS) into one optical fibre sensing system for multi-sensing of the two gases. The dyes are separately coated on distal ends of a 2 × 2 optical fibre coupler using the sol-gel technique. The reflection spectrum contains distinctive absorption peaks of the two dyes in the wavelength domain and hence can be analysed using a single spectrometer. The absorbance at a wavelength of 608 nm corresponding to the absorption peak of the thymol blue exhibits an exponential decrease as the CO2 concentration increases from 0 ppm to 60 000 ppm. The absorption bands at approximately 490 nm and 711 nm corresponding to the Soret band and Q-band of TPPS, respectively, show changes both in absorbance and central wavelengths in response to NH3 concentration in the range from 0 ppm to 80 ppm. The limit of detection and response time for CO2 and NH3 are 637 ppm and 0.15 ppm, 86 s and 83 s, respectively. The proposed sensor demonstrates the capability of sensing NH3 and CO2 simultaneously in a complex gas atmosphere containing other chemicals such as methanol and acetone, which are representative of industrial or metabolic compounds that may confound measurements.

Temperature and humidity are essential parameters in monitoring the health of patients in critical care. An optical fibre sensor has been developed for simultaneous measurement of relative humidity (RH) and temperature at a single optical fibre tip based on the reflected intensity. Combining these measurements enables absolute humidity values to be obtained. The fibre tip is first modified with a coating of poly(allylamine hydrochloride) (PAH) / silica nanoparticles (SiO2 NPs) for relative humidity (RH) measurement and then coated with thermochromic liquid crystal (TLC) for temperature measurement. Experimental results demonstrate that the RH and temperature sensitivity are respectively 0.43 %/RH% (intensity at a wavelength of 650 nm) from 55 to 90% RH (R2 = 0.973) and 3.97 nm/°C from 28 to 46 °C (R2>0.99). Moreover, the proposed sensor has low crosstalk between each of the sensing parameters, with a response time of 3.1 s temperature (30–38 °C) and 13.2 s for relative humidity (20–80 %). In comparison to grating based optical fibre sensors the proposed sensor is low-cost with a simple manufacturing process which has the potential to find widespread use in healthcare applications.

Ammonia gas sensors were fabricated via layer-by-layer (LbL) deposition of diazo resin (DAR) and a binary mixture of tetrakis(4-sulfophenyl)porphine (TSPP) and poly(styrene sulfonate) (PSS) onto the core of a multimode U-bent optical fiber. The penetration of light transferred into the evanescent field was enhanced by stripping the polymer cladding and coating the fiber core. The electrostatic interaction between the diazonium ion in DAR and the sulfonate residues in TSPP and PSS was converted into covalent bonds using UV irradiation. The photoreaction between the layers was confirmed by UV-vis and Fourier transform infrared spectroscopy. The sensitivity of the optical fiber sensors to ammonia was linear when exposed to ammonia gases generated from aqueous ammonia solutions at a concentration of approximately 17 parts per million (ppm). This linearity extended up to 50 ppm when the exposure time (30 s) was shortened. The response and recovery times were reduced to 30 s with a 5-cycle DAR/TSPP+PSS (as a mixture of 1 mM TSPP and 0.025 wt% PSS in water) film sensor. The limit of detection (LOD) of the optimized sensor was estimated to be 0.31 ppm for ammonia in solution, corresponding to approximately 0.03 ppm of ammonia gas. It is hypothesized that the presence of the hydrophobic moiety of PSS in the matrix suppressed the effects of humidity on the sensor response. The sensor response was stable and reproducible over seven days. The PSS-containing U-bent fiber sensor also showed superior sensitivity to ammonia when examined alongside amine and non-amine analytes.

Capillary refill time (CRT) refers to the time taken for body tissue to regain its colour after an applied blanching pressure is released. Usually, pressure is manually applied and not measured. Upon release of pressure, simple mental counting is typically used to estimate how long it takes for the skin to regain its colour. However, this method is subjective and can provide inaccurate readings due to human error. CRT is often used to assess shock and hydration but also has the potential to assess peripheral arterial disease which can result in tissue breakdown, foot ulcers and ultimately amputation, especially in people with diabetes. The aim of this study was to design an optical fibre sensor to simultaneously detect blood volume changes and the contact pressure applied to the foot. The CRT probe combines two sensors: a plastic optical fibre (POF) based on photoplethysmography (PPG) to measure blood volume changes and a fibre Bragg grating to measure skin contact pressure. The results from 10 healthy volunteers demonstrate that the blanching pressure on the subject’s first metatarsal head of the foot was 100.8 ± 4.8 kPa (mean and standard deviation), the average CRT was 1.37 ± 0.46 s and the time to achieve a stable blood volume was 4.77 ± 1.57 s. For individual volunteers, the fastest CRT measured was 0.82 ± 0.11 and the slowest 1.94 ± 0.49 s. The combined sensor and curve fitting process has the potential to provide increased reliability and accuracy for CRT measurement of the foot in diabetic foot ulcer clinics and in the community.

Real time monitoring of bacterial attachment to medical devices provides opportunities to detect early biofilm formation and instigate appropriate interventions before infection develops. This study utilises long period grating (LPG) optical fibre sensors, incorporated into the lumen of endotracheal tubes (ETTs), to monitor in real time, Pseudomonas aeruginosa surface colonisation and biofilm formation. The wavelength shift of LPG attenuation bands was monitored for 24 h and compared with biofilm biomass, quantified using confocal fluorescence microscopy imaging. Biofilm formation was compared on uncoated ETTs and optical fibres, and on a biofilm resistant acrylate polymer, after challenge in an artificial sputum or minimal growth medium (RPMI-1640). The LPG sensor was able to detect a biofilm biomass as low as 81 μg/cm(2), by comparison with the confocal image quantification. An empirical exponential function was found to the link optical attenuation wavelength shift with the inverse of the biofilm biomass, allowing quantification of biofouling from the spectral response. Quantification from the sensor allows infection interception and early device removal, to reduce, for example, the risk of ventilator associated pneumonia.

This paper presents on the development of a tubular cardiovascular phantom system to simulate pulse transit time (PTT). The PTT defined as the delay time between two pulses in one cardiac cycle has been shown to be promising method for cuffless continuous blood pressure (BP) measurement. However most of the PTT measurement was performed on human subjects, thus giving a difficulty in validating sensor performance due to variability of BP. Therefore, a cardiovascular phantom system was proposed for simulate the PTT measurement. An electronic controlled module was developed to control pump operation for pulse generation. Plastic optical fibre (POF) sensors were used to measure the pulse signal on the flexible tube and the results were compared with an in-line pressure sensor. In this experiment, the delay time between two pulses were calculated offline using Matlab software and correlated with pulse pressure. The result demonstrate that the pulse delay time recorded by both sensors decreased with increase of pulse rate and pulse pressure. These results on the phantom study showed similar pattern to the human model, thus indicating that the system is able to simulate PTT for sensor validation purposes.

© 1983-2012 IEEE. Development of a biocompatible pH sensor is of importance in biomedical applications, particularly for in vivo measurement, providing necessary information for clinical diagnosis and treatment such as chronic wounds and foetal acidosis. Traditional pH-indicator based optical sensors have problems of dye-leaching and photobleaching that restrict their uses in long-term monitoring. In this work, a dye-free fibre optic pH sensor is proposed consisting of a U-shape multimode optical fibre coated with a hybrid organic-inorganic composite film. The film is formed by cross-linking ethyl cellulose with a silica matrix at an optimised ethyl cellulose/silica molar ratio of 0.0065 via weakly interacted hydrogen bonding. This bonding is affected by hydrogen concentration (i.e., pH) in a solution resulting in a morphological change of the polymer aggregation presented in the silica matrix leading to refractive index change of the film. The developed sensor shows a reversible response to pH from 4.5 to 12.5 and exhibits linear correlation between transmitted light power and pH with a limit of agreement (LoA) between the sensor and a commercial probe of ±0.2 pH. For a clinically important range of pH values between 6 and 8 the LoA is ±0.1 pH. The sensor has low cross-sensitivity to temperature as the maximum interpreted pH change attributed to the power change is 0.12 pH when the temperature changes from 21 °C to 39 °C. To demonstrate biomedical relevance, the sensor is used to monitor pH of human serum. An in-house cytotoxicity assay is conducted with mouse fibroblast cell revealing that the film is not cytotoxic.

A tip-based fibreoptic localised surface plasmon resonance (LSPR) sensor is reported for the sensing of volatile organic compounds (VOCs). The sensor is developed by coating the tip of a multi-mode optical fibre with gold nanoparticles (size: 40 nm) via a chemisorption process and further functionalisation with the HKUST-1 metal–organic framework (MOF) via a layer-by-layer process. Sensors coated with different cycles of MOFs (40, 80 and 120) corresponding to different crystallisation processes are reported. There is no measurable response to all tested volatile organic compounds (acetone, ethanol and methanol) in the sensor with 40 coating cycles. However, sensors with 80 and 120 coating cycles show a significant redshift of resonance wavelength (up to ~9 nm) to all tested volatile organic compounds as a result of an increase in the local refractive index induced by VOC capture into the HKUST-1 thin film. Sensors gradually saturate as VOC concentration increases (up to 3.41%, 4.30% and 6.18% in acetone, ethanol and methanol measurement, respectively) and show a fully reversible response when the concentration decreases. The sensor with the thickest film exhibits slightly higher sensitivity than the sensor with a thinner film. The sensitivity of the 120-cycle-coated MOF sensor is 13.7 nm/% (R2 = 0.951) with a limit of detection (LoD) of 0.005% in the measurement of acetone, 15.5 nm/% (R2 = 0.996) with an LoD of 0.003% in the measurement of ethanol and 6.7 nm/% (R2 = 0.998) with an LoD of 0.011% in the measurement of methanol. The response and recovery times were calculated as 9.35 and 3.85 min for acetone, 5.35 and 2.12 min for ethanol, and 2.39 and 1.44 min for methanol. The humidity and temperature crosstalk of 120-cycle-coated MOF was measured as 0.5 ± 0.2 nm and 0.5 ± 0.1 nm in the humidity range of 50–75% relative humidity (RH) and temperature range of 20–25 °C, respectively.

Accurate and efficient monitoring of electrical machine (EM) operating parameters, including temperature, mechanical vibration, torque and rotating speed and others that can indicate the EM health conditions is becoming ever more important in the world of electrical drives. The traditional methodology of one sensor per parameter can be theoretically replaced by a “one sensor measures all” technology, which can be achieved through the use of fibre-optic sensors (FOS). In this paper, several FOSs, which use different optical sensing principles for multiple physical parameter measurements of EMs, are reviewed. This paper also provides an insight into the major developments, and discusses the engineering challenges of FOS used for EM monitoring over the last few decades, and compares the advanced features of FOS with those of conventional sensors in use. Finally, a novel FOS-EM observer system scheme employing the Fibre Bragg Grating technique for multi-parameter monitoring of EM health is proposed, after discussion of the preceding industrial and academic FOS cases for EM applications.

Textile-based systems are an attractive prospect for wearable technology as they can provide monitoring of key physiological parameters in a comfortable and unobtrusive form. A novel system based on multichannel optical fibre sensor probes integrated into a textile sleeve is described. The system measures the photoplethysmogram (PPG) at two wavelengths (660 and 830 nm), which is then used to calculate oxygen saturation (SpO2). In order to achieve reliable measurement without adjusting the position of the garment, four plastic optical fibre (POF) probes are utilised to increase the likelihood that a high-quality PPG is obtained due to at least one of the probes being positioned over a blood vessel. Each probe transmits and receives light into the skin to measure the PPG and SpO2. All POFs are integrated in a stretchable textile sleeve with a circumference of 15 cm to keep the sensor in contact with the subject&rsquo, s wrist and to minimise motion artefacts. Tests on healthy volunteers show that the multichannel PPG sensor faithfully provides an SpO2 reading in at least one of the four sensor channels in all cases with no need for adjusting the position of the sleeve. This could not be achieved using a single sensor alone. The multichannel sensor is used to monitor the SpO2 of 10 participants with an average wrist circumference of 16.0 &plusmn, 0.6 cm. Comparing the developed sensor&rsquo, s SpO2 readings to a reference commercial oximeter (reflectance Masimo Radical-7) illustrates that the mean difference between the two sensors&rsquo, readings is &minus, 0.03%, the upper limit of agreement (LOA) is 0.52% and the lower LOA is &minus, 0.58%. This multichannel sensor has the potential to achieve reliable, unobtrusive and comfortable textile-based monitoring of both heart rate and SpO2 during everyday life.

Highly sensitive and selective long-period grating (LPG) fiber-optic sensors modified with molecularly imprinted TiO2 nanothin films were fabricated. The films were deposited onto the surface of the optical fiber via liquid-phase deposition (LPD), using tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP) as a template. Three LPG resonance bands were monitored during film deposition, which was of duration 4.5 h. Prior to template removal, heat treatment at 60 °C under high-humidity conditions led to an increase in refractive index of the TiO2 film, evidenced by changes in the central wavelengths of the attenuation bands. After template removal using HCl solution (0.01 M), the TMPyP-imprinted film-modified LPG sensor showed higher sensitivity to the template molecule than to structurally related guest molecules. This was measured at the 1st and 2nd resonance bands, with wavelengths ranging from 690 to 738 nm and 815 to 905 nm, respectively. No selective binding of the template was observed with a non-imprinted TiO2 film prepared in the same manner. Furthermore, the heat-treated imprinted films exhibited a substantial enhancement of photocatalytic activity for template irradiation. In particular, the self-cleaning property of the imprinted film-modified LPG sensor under ultraviolet irradiation led to highly efficient and selective binding to the template. The mechanism of the interaction between the template and the TiO2 matrix was investigated by UV–vis and Fourier-transform infrared (FTIR) spectroscopies. Additionally, morphological studies using scanning electron microscopy (SEM) were conducted.

© 2020 The Royal Society of Chemistry. Dabrafenib is one of the most widely used of the new generation of targeted anti-cancer drugs. However, its therapeutic window varies for different patients and so there is an unmet need for methods to monitor the dose of drug which the patient receives and at the specific site where it acts. In the case of cancers, it is critical to measure the concentration of drug not just in the bloodstream overall, but in or near tumours, as these will not be the same over multiple time periods. A novel sensor based on an optical fibre long period grating (LPG) modified with a molecular imprinted polymer (MIP) has been developed with the ultimate aim of achieving minimally invasive measurements of Dabrafenib at the tumour site. A molecularly imprinted polymer specific for Dabrafenib was coated on a methacryloylalkoxysilane-functionalised optical fibre long period grating. In vitro experimental results demonstrate that the Dabrafenib sensitivity is 15.2 pm (μg mL-1)-1 (R2 = 0.993) with a limit of detection (LoD) of 74.4 μg mL-1 in serum solution. Moreover, the proposed sensor shows selective response to Dabrafenib over structurally similar 2-Aminoquinoline.

This paper presents a design concept and a prototype of a polyimide-coated Fibre Bragg Grating (FBG) thermal sensor system based on a fast scan tunable laser source (up to 1 kHz sensing frequency). This system was deployed to perform a comprehensive 2-D real-time radial and axial thermal profiling of an electromagnetic coil - the short duty cycle electric machine (EM) windings. The thermal measurements were performed using an equivalent prototype consisting of an FBG interrogator, a multi-FBG string temperature sensor, power resistors (thermal objects), and conventional thermocouples used for measurement comparison. The FBG measurements of copper windings were subsequently carried out using a copper coil with FBG sensors system to map the radial and axial temperature distribution of the coil. The experimental results show that Polyimide-coated FBG sensor can be used for multi-point temperature monitoring of electromagnetic coils with a sensing temperature range of 20-200°C, a spatial resolution of 6cm, and a measurement error of ± 2%. The obtained thermal maps can be used for the identification of hot spot locations in electromagnetic coil systems.

Highly sensitive and selective long-period grating (LPG) fiber-optic sensors modified with molecularly imprinted TiO

Optical fibre sensors based on long period gratings (LPG) modified with functional coatings that can change their optical properties in response to the presence of the particular analyte have attracted much research attention. Ultimately such sensors have the capability to become highly sensitive and selective bio- and chemical sensors. In addition to the advantages of all optical fibre sensors such as miniature size, immunity to electromagnetic interference and low power consumption, LPGs offer wavelengths encoded information which eliminates the need for a reference and are mechanically robust which makes them attractive for practical application. One of the key components in LPG bio- and chemical optical fibre sensors is a capture layer that provides chemical selectivity to the target analyte. In this work, an overview of the different LPG bio- and chemical optical fibre sensors functionalised with various capture layers such as mesoporous thin films, molecularly imprinted polymers (MIPs) and metal-organic frameworks (MOFs) will be presented. Particular focus will be given to potential applications of the novel optical fibre LPG sensors in healthcare with examples of measuring biomarkers (protein M-immunoglobulin) and drug delivery (anaesthetics) in intensive care.

The widely applied capillary refill time (CRT) measurement is currently performed by manually applying pressure and using a stopwatch to record the time taken for the skin to recover its normal colour after a blanching pressure is applied. This method is highly subjective and observer-dependent. This paper presents a new, integrated optical sensor probe, combining monitoring of the capillary refilling process with the blanching pressure applied. The sensor consists of an optical fibre-based reflectance photoplethysmography (PPG) sensor to measure the reflected light signal, as well as a fibre Bragg grating (FBG) to measure the applied blanching pressure and to indicate the time when pressure is released. This sensor was applied to calculate the CRT (1.38 &plusmn, 0.66 s) of 10 healthy adult volunteers with (55.2 &plusmn, 21.8 kPa) blanching pressures. The form of the capillary refilling data was investigated by fitting using an exponential regression model (R2 &gt, 0.96). The integrated probe has the potential to improve the reliability of CRT measurements by standardising the optimum duration and magnitude of the pressure.

Colorimetric measurement is a versatile, low-cost method for bio-/chemical sensing and that has importance in biomedical applications. General carbon dioxide (CO2) sensors based on colorimetric change of a pH indicator report only one parameter at a time and are cross-sensitive to relative humidity (RH). This work describes a novel optical fiber sensor with a thin film on the distal end of the fiber, combining colorimetric measurement and a white light Fabry–Perot interferometer (FPI) for the simultaneous measurement of CO2 and RH. The CO2 sensitive dye ion-pair: thymol blue and tetramethylammonium hydroxide are encapsulated inside organically modified silica forming an extrinsic FPI cavity (refractive index of 1.501 ± 0.02 and thickness of 5.83 ± 0.09 μm). The sensor reversibly responds to 0–6% CO2 and 0–90% RH with negligible cross-sensitivity and allows measurement of both parameters simultaneously. A sensitivity of ∼0.19 nm/%RH is obtained for RH measurement based on the wavelength shift of the FPI and there is a polynomial correlation between the average intensity of selected wavelengths and the concentration of CO2. The applicability of the sensor is demonstrated by measuring the CO2 and RH exhaled from human breath with a percent error of 3.1% and 2.2% respectively compared to a commercial datalogger. A simulation model is provided for the dye-encapsulated FPI sensor allowing simulation of spectra of sensors with different film thicknesses.

This work reports an optical fibre probe functionalised with ‘cotton-shaped’ gold-silica nanostructures for relative humidity (RH) monitoring. The sensor response utilises the localised surface plasmon resonance (LSPR) of self-assembled nanostructures: gold nanospheres (40 nm) surrounded by one layer of poly (allylamine hydrochloride) and hydrophilic silica nanoparticles (10-20 nm) on the end-facet of an optical fibre via a wavelength shift of the reflected light. Sensor optimisation is investigated by varying the density of gold nanoparticles on the end-facet of an optical fibre. It is demonstrated that the plasmonic hybridisation mode appearing when the average gold interparticle distance is small (Median: 7.5 nm) is more sensitive to RH after functionalisation than the singular plasmonic mode. The plasmonic hybridisation mode sensor demonstrates a high linear regression to RH with a sensitivity of 0.63 nm/%RH and excellent reversibility. The response time (T10-90%) and recovery time (T90-10%) are calculated as 1.2 ± 0.4 s and 0.95 ± 0.18 s. The sensor shows no measurable cross-talk to temperature in the tested range between 25 °C to 40 °C and the 95% limit of agreement is 3.1%RH when compared to a commercial reference sensor. Simulation with finite element analysis reveals a polarisation-dependent plasmonic hybridisation with a redshift of plasmonic wavelength as a decrease of the interparticle distance and a higher refractive index sensitivity, which results in a high sensitivity to RH as observed in the experiment.

Highly sensitive fiber-optic ammonia gas sensors were fabricated via layer-by-layer deposition of poly(diallyldimethylammonium chloride) (PDDA) and tetrakis(4-sulfophenyl)porphine (TSPP) onto the surface of the core of a hard-clad multimode fiber that was stripped of its polymer cladding. The effects of film thickness, length of sensing area, and depth of evanescent wave penetration were investigated to clearly understand the sensor performance. The sensitivity of the fiber-optic sensor to ammonia was linear in the concentration range of 0.5–50 ppm and the response and recovery times were less than 3 min, with a limit of detection of 0.5 ppm, when a ten-cycle PDDA/TSPP film was assembled on the surface of the core along a 1 cm-long stripped section of the fiber. The sensor’s response towards ammonia was also checked under different relative humidity conditions and a simple statistical data treatment approach, principal component analysis, demonstrated the feasibility of ammonia sensing in environmental relative humidity ranging from dry 7% to highly saturated 80%. Penetration depths of the evanescent wave for the optimal sensor configuration were estimated to be 30 and 33 nm at wavelengths of 420 and 706 nm, which are in a good agreement with the thickness of the 10-cycle deposited film (ca. 30 nm).

Incorrect endotracheal tube (ETT) cuff inflation pressure causes significant problems for intubated patients. The technical development and first in vivo use of a smart ETT for measurements at the cuff-trachea interface during mechanical ventilation are described. The intra-tracheal multiplexed sensing (iTraXS) ETT contains integrated optical fibre sensors to measure contact pressure and blood perfusion. The device is tested during mechanical ventilation in a porcine model (N=6). For contact pressure, signals were obtained in all 30 measurements. For perfusion, data could be obtained in all 33 measurements. In the 3 cases where the cuff was inflated to an artificially high-level, blood occlusion is observed.

Immunoglobulin A (IgA), IgG, and IgM immunosensors based on long period gratings (LPG) are developed in this work. An LPG has the advantages of being lightweight and small size, which provide possibility to design miniaturized immunosensors for point of care antibody tests. Poly (allylamine hydrochloride) (PAH) and silica nanoparticles (SiNPs) are deposited on the surface of an LPG using a layer-by-layer method. The PAH/SiNPs matrix on the surface of LPG provides a porous surface structure, which is used to immobilise bio-receptors. Anti-IgA, anti-IgG, and anti-IgM are immobilised on the surface of three LPGs to fabricate IgA, IgG, and IgM sensors respectively. The refractive index (RI) on the surface of the LPG increases with antibody concentration, which induces wavelength shifts of the LPG’s attenuation bands. The performance tests of IgA, IgG, and IgM sensors are carried out in the ranges of 10–200 μg/ml, 1–90 μg/ml, and 10–320 μg/ml respectively, and the minimum detected concentrations achieved for all the three sensors are 10 μg/ml. The selectivity of the platform is investigated based on an IgM sensor. Preliminary results obtained in this work demonstrate that LPG-based immunosensors can achieve sufficient selectivity and suitable detection range for human serum testing.

Pulse arrival time (PAT) is the delay time between the peak of the R-wave Electrocardiogram (ECG) signal and the peak of Photoplethysmogram (PPG) signals. This method is widely exploited for continuous cuffless blood pressure measurement. In the literature, the PAT was determined based on the mean at a certain number or certain period of heartbeats, but none of them deployed a single pulse wave for PAT calculation. Therefore, in this paper, a relationship between mean PAT (15 pulses ± Standard Deviation (SD)) and instantaneous PAT (a pulse) with blood pressure (BP) was investigated on thirteen healthy male volunteers (aged between 17 to 42 years) through a pedal exercise. The PAT is grouped into three (3) categories which depend on the spatial position of the PPG signal measured; finger (PATf), wrist (PATw), and underfoot (PATt). The ECG and the PPG signals were synchronized using a Nexus-10 MK II data acquisition device and Matlab software (R 2014b) for subsequent analysis. An oscillometric cuff-based blood pressure instrument (Ostar, P2) was used as a BP reference during the experiment. Statistical analysis showed no significant difference in the |r| value between mean (15 pulses ± SD) and instantaneous PAT-BP; hence both methods are applicable for BP estimation using the PAT-BP calibration technique.

Development of an optical fibre sensor based on a long period grating functionalised with surface imprinted polymers for detection of Dabrafenib, a B-Raf inhibitor drug, in the concentration range 0-800 μg/ml is reported.

This paper presents the development of an optical-based fibre sensor system for pulse transit time (PTT) measurement. PTT is a promising method for cuffless continuous blood pressure (BP). In this study, the time delay between the R-wave peak of the Electrocardiogram (ECG) and the peak of the Photoplethysmogram (PPG) was measured and denoted as PTT. A conductive fabric based ECG electrode was deployed to measure the ECG on the chest. A plastic optical fibre (POF) was deployed as a medium to transport and receive light for PPG detection. A green LED (525 nm) was deployed as a light source to illuminate the skin tissue, and a phototransistor was deployed to measure the reflected light intensity. A cuff-based blood pressure (Ostar, P2) was used to measure blood pressure simultaneously with the PTTs. The ECG and the PPG signals were synchronized using a Nexus-10 MK II data acquisition device along with Matlab software for subsequent analysis. In this study, the PTT at three different positions (finger, wrist and foot) were recorded along with the BP measurement during a tilt table experiment. The results show that the system is able to monitor the PTT during a tilt table moving from supine position to tilt-up position (0° to 70°). A statistical analysis was performed by using SPSS software to compare the mean of BP and the PTT in supine and tilt-up position. The novelty of the developed system lies in the miniaturization of the POF system and the combination of POFs and textile electrodes that are well suited to smart textile applications.

An endotracheal tube with integrated optical fibre sensors (fibre Bragg grating and photoplethysmography) is described. The system aims to ensure the appropriate cuff inflation pressure to achieve a gas seal but reduce pressure injury.

Monitoring of key physiological and pharmacological parameters is an important part of a closed loop control system in critical care. Optical fiber sensors provide a versatile platform technology that can be easily incorporated into existing in-dwelling catheters or face masks. With appropriate functional coatings they can be used to monitor a range of relevant parameters and two different examples are presented: (i) respiration monitoring; (ii) drug level monitoring. Respiration monitoring involves monitoring of temperature and humidity in inhaled and exhaled breath. The optical fiber sensor consists of a fiber Bragg grating to measure temperature and a tip coating whose refractive index changes with humidity. The sensor is demonstrated to be able to track breath to breath changes when incorporated into a mask. Drug level monitoring is demonstrated in vitro using a long period grating coated with molecularly imprinted polymer nanoparticles that are sensitive to fentanyl. The sensor has a limit of detection of 50ng/ml.

Creatinine (CR) is a representative metabolic byproduct of muscles, and its sensitive and selective detection has become critical in the diagnosis of kidney diseases. In this study, poly(acrylic acid) (PAA)-assisted molecularly imprinted (MI) TiO2 nanothin films fabricated via liquid phase deposition (LPD) were employed for CR detection. The molecular recognition properties of the fabricated films were evaluated using fiber optic long period grating (LPG) and quartz crystal microbalance sensors. Imprinting effects were examined compared with nonimprinted (NI) pure TiO2 and PAA-assisted TiO2 films fabricated similarly without a template. In addition, the surface modification of the optical fiber section containing the LPG with a mesoporous base coating of silica nanoparticles, which was conducted before LPD-based TiO2 film deposition, contributed to the improvement of the sensitivity of the MI LPG sensor. The sensitivity and selectivity of LPGs coated with MI films were tested using CR solutions dissolved in different pH waters and artificial urine (near pH 7). The CR binding constants of the MI and NI films, which were calculated from the Benesi–Hildebrand plots of the wavelength shifts of the second LPG band recorded in water at pH 4.6, were estimated to be 67 and 7.8 M−1, respectively, showing an almost ninefold higher sensitivity in the MI film. The mechanism of the interaction between the template and the TiO2 matrix and the film composition was investigated via ultraviolet–visible and attenuated total reflectance Fourier-transform infrared spectroscopy along with X-ray photoelectron spectroscopy analysis. In addition, morphological studies using a scanning electron microscope and atomic force microscope were conducted. The proposed system has the potential for practical use to determine CR levels in urine samples. This LPG-based label-free CR biosensor is innovative and expected to be a new tool to identify complex biomolecules in terms of its easy fabrication and simplicity in methodology.

A novel optical sensor probe combining monitoring of blood oxygen saturation (SpO2) with contact pressure is presented. This is beneficial as contact pressure is known to affect SpO2 measurement. The sensor consists of three plastic optical fibres (POF) used to deliver and collect light for pulse oximetry, and a fibre Bragg grating (FBG) sensor to measure contact pressure. All optical fibres are housed in a biocompatible epoxy patch which serves two purposes: (i) to reduce motion artefacts in the photoplethysmogram (PPG), and (ii) to transduce transverse loading into an axial strain in the FBG. Test results show that using a combination of pressure measuring FBG with a reference FBG, reliable results are possible with low hysteresis which are relatively immune to the effects of temperature. The sensor is used to measure the SpO2 of ten volunteers under different contact pressures with perfusion and skewness indices applied to assess the quality of the PPG. The study revealed that the contact force ranging from 5 to 15 kPa provides errors of &lt, 2%. The combined probe has the potential to improve the reliability of reflectance oximeters. In particular, in wearable technology, the probe should find use in optimising the fitting of garments incorporating this technology.

An optical fibre long period grating (LPG) based volatile organic compound (VOC) sensor coated with ZIF-8, a material from the zeolite imidazolate framework (ZIF) family, functional coating is presented. ZIF-8 film was deposited onto the surface of the LPG using an in-situ crystallization technique by mixing freshly prepared 12.5 mM zinc nitrate hexahydrate and 25 mM 2-metyl-imidazole solutions in methanol. A concentration specific response to acetone, ethanol and methanol vapour was obtained over the high concentration range up to tens thousands ppm. The LPG based sensor works at phase-matching turning point (PMTP) and such operates at the highest sensitivity. A novel approach for the data analysis based on the measurement of the bandwidth of the U-shaped attenuation band of the LPG is introduced. The optimized sensor shows a sensitivity of 0.015 ± 0.001 and 0.018 ± 0.0015 nm/ppm and limit of detection (LOD) of 6.67 and 5.56 ppm for acetone and ethanol respectively.

An optical fibre long period grating (LPG) based carbon dioxide (CO2) sensor coated with HKUST-1, a material from the metal organic framework family, functional coating is presented. In-situ crystallization and layer by layer (LbL) techniques of HKUST-1 thin film synthesis are compared in terms of the feasibility of the deposition procedure (time and cost efficiency) and the sensitivity of the film to carbon dioxide. The sensing mechanism is based on the measurement of the change of the refractive index (RI) of the coating that is induced by the penetration of CO2 molecules into the HKUST-1 pores. The HKUST-1 film was characterized by scanning electron microscopy (SEM). The thickness and refractive index (RI) of the 10, 20 and 40 layers thick films were determined using ellipsoetry. The crystallinity of the films was examined by X-ray diffraction pattern (XRD). While no response to CO2 was observed for the sensor coated using the in-situ crystallization technique, an LPG modified with 10, 20 and 40 layers of HKUST-1 films using LbL method upon exposure to CO2 in the range of 500 ppm to 40,000 ppm showed good sensitivity. The film containing 40 layers exhibited the highest sensitivity to CO2 with an obtained detection limit of 401 ppm.

Molecularly imprinted nanoparticles (MIPs) synthesized via a solid-phase synthesis process are successfully deposited on the surface of a long period grating (LPG) optical fibre sensor for detection of fentanyl in a liquid solution. Real-time detection of fentanyl can be observed from the LPG sensor. The wavelength change of LPG sensor linearly fits the concentration of fentanyl with a sensitivity of 0.004 nm/ (ng/ml) and limit of detection of 3.75 ng/ml for concentrations up to 200 ng/ml.

The sensitivity of a low-cost polymeric optical fibre humidity sensor based on transmittance changes due to evanescent wave absorption is reported using test measurements in an environmental chamber and of the skin. The layer-by-layer method was used to coat 30mm of the central unclad section of a multimode polymeric optical fibre with 7 layers of a hydrophilic film consisting of bilayers of poly(allylamine hydrochloride) and SiO2 mesoporous nanoparticles. Sensor characterisation shows a decrease in light transmission as relative humidity increases as a result of refractive index changes of the coating deposited onto the optical fibre which correlates with a commercial capacitive humidity sensor. The sensitivity obtained for the sensor coated with an optimum 7 layers was approximately -3.87x10-3 and -9.61x10-3 in transmittance percentage per RH percentage for the range of ~10% to ~75% RH and 90% to 97% RH, respectively. In addition, a response time of 1.5s can be seen for breath monitoring with the polymeric optical fibre humidity sensor. The proof of concept measurements made on the skin indicate that this sensor has the potential to be used to monitor humidity of the skin microenvironment within a wound dressing which can be used to provide better prognosis of healing.

Real time monitoring of plasma propofol concentration is an important goal for safe anaesthesia. LPGs functionalized with host-guest imprinted TiO2 films were used to test propofol detection in aqueous solutions. The lowest detected concentration was 0.6 μM.

An optical fibre long period grating (LPG) based volatile organic compound (VOC) sensor coated with ZIF-8, a material from the zeolite imidazolate framework (ZIF) family, functional coating is presented. ZIF-8 film was deposited onto the surface of the LPG using an in-situ crystallization technique. A concentration specific response to ethanol was obtained over the range from 62 to 666 ppm. A novel approach for the data analysis based on the measurement of the bandwidth of the U-shaped attenuation band of the LPG is introduced. The sensor shows a sensitivity of 0.018±0.0015 nm/ppm and limit of detection (LOD) of 5.56 ppm for ethanol vapour in air.