Search

Generalized ellipsometry measurements are used to extract the complex dielectric function (ε = ε 1 + i ε 2) spectra of GdScO3 single crystals over the 0.7–8.5 eV photon energy range. GdScO3 is a wide bandgap semiconductor with a high dielectric constant, and potential applications include replacing SiO2 in silicon-based transistors and as an epitaxial substrate for thin film growth. This work presents the anisotropic optical properties for electric fields oscillating parallel to the a-, b-, and c-crystallographic axes. A direct bandgap is identified at 6.44 eV along the direction parallel to the a-axis, with additional critical points observed at 6.74 and 7.42 eV in the same direction. Additional above gap critical point transitions are found at 6.72, 7.31, and 7.96 along the direction parallel to the b-axis and 6.83 and 8.00 eV along the direction parallel to the c-axis. [ABSTRACT FROM AUTHOR]

Flux calibrations in multi-source thermal co-evaporation of thin films have been developed based on real-time spectroscopic ellipsometry (RTSE) measurements. This methodology has been applied to fabricate CuInSe2 (CIS) thin film photovoltaic (PV) absorbers, as an illustrative example, and their properties as functions of deposition rate have been studied. In this example, multiple Cu layers are deposited step-wise onto the same Si wafer substrate at different Cu evaporation source temperatures (TCu). Multiple In2Se3 layers are deposited similarly at different In source temperatures (TIn). Using RTSE, the Cu and In2Se3 deposition rates are determined as functions of TCu and TIn. These rates, denoted Reff, are measured in terms of effective thickness which is the volume per planar substrate area and accounts for surface roughness variations with deposition time. By assuming that all incident metal atoms are incorporated into the films and that the atomic concentrations in the deposited material components are the same as in single crystals, initial estimates of the Cu and In atom fluxes can be made versus TCu and TIn. Applying these estimates to the co-evaporation of a set of CIS films from individual Cu, In, and Se sources, atomic concentration corrections can be assigned to the Cu and In2Se3 calibration films. The corrections enable generation of a novel calibration diagram predicting the atomic ratio y = [Cu]/[In] and rate Reff within the TCu-TIn plane. Using this diagram, optimization of the CIS properties as a PV absorber can be achieved versus both y and Reff. [ABSTRACT FROM AUTHOR]

Background: Adjuvant administration of hyperthermia (HT) with radiation therapy in the treatment of cancer has been extensively studied in the past five decades. Concurrent use of the two modalities leads to both complementary and synergetic enhancements in tumor management, but presents a practical challenge. Their simultaneous administration using the same implantable thermo‐brachytherapy (TB) seed source has been established theoretically through magnetically mediated heat induction with ferromagnetic materials. Careful consideration, however, showed that regular ferromagnetic alloys lack the required conductivity to generate enough power through eddy current to overcome heat dissipation due to blood perfusion at clinically measured rates. Purpose: We characterized the TB implant that combines a sealed radioactive source with a ferrimagnetic ceramic (ferrite) core, serving as a self‐regulating HT source when placed in an alternating electromagnetic field. To increase the heat production and uniformity of temperature distribution the empty spacers between radioisotope seeds were replaced by hyperthermia‐only (HT‐only) seeds. Methods: The heat generation due to eddy currents circulating in the seed's thin metal shell, surrounding the core, depends drastically on the core permeability. We identified a soft ferrite material (MnZnFe2O4$\rm MnZnFe_2O_4$) as the best candidate for the core, owing to its high permeability, the HT‐range Curie temperature, adjustable through material composition, and a sharp Curie transition, leading to heat self‐regulation, with no invasive thermometry required. The core permeability as a function of temperature was calculated based on measured resistor‐inductor (RL) circuit parameters and material B‐H curves. The thickness of the shell was optimized separately for TB and HT‐only seeds, having slightly different dimensions. Heat generation was calculated using the power versus temperature approximation. Finally, the temperature distribution for a realistic prostate LDR brachytherapy plan was modeled with COMSOL Multiphysics for a set of blood perfusion rates found in the literature. Results: The small size of the investigated ferrite core samples resulted in demagnetization significantly decreasing the relative permeability from its intrinsic value of ∼5000 to about 11 in the range of magnetic field amplitude and frequency values relevant to HT. The power generated by the seed dropped sharply as the shell thickness deviated from the optimal value. The optimized TB and HT‐only seeds generated 45 and 267 mW power, respectively, providing a HT source sufficient for >90% volume coverage even for the highest blood perfusion rates. The toxicity of the surrounding normal tissues was minimal due to the rapid temperature fall off within a few millimeters distance from a seed. Conclusions: The investigated TB and HT‐only seed prototypes were shown to provide sufficient power for the concurrent administration of radiation and HT. In addition to being used as a source for both radiation and heat at the onset of cancer therapy, these implanted seeds would be available for treatment intensification in the setting of salvage brachytherapy for locally radiorecurrent disease, possibly as a sensitizer to systemic therapies or as a modulator of the immune response, without another invasive procedure. Experimentally determined parameters of the ferrite material cores provided in this study establish a mechanistic foundation for future pre‐clinical and clinical validation studies. [ABSTRACT FROM AUTHOR]

Generalized ellipsometry measurements are used to extract the complex dielectric function (ε = ε 1 + i ε 2) spectra of GdScO3 single crystals over the 0.7–8.5 eV photon energy range. GdScO3 is a wide bandgap semiconductor with a high dielectric constant, and potential applications include replacing SiO2 in silicon-based transistors and as an epitaxial substrate for thin film growth. This work presents the anisotropic optical properties for electric fields oscillating parallel to the a-, b-, and c-crystallographic axes. A direct bandgap is identified at 6.44 eV along the direction parallel to the a-axis, with additional critical points observed at 6.74 and 7.42 eV in the same direction. Additional above gap critical point transitions are found at 6.72, 7.31, and 7.96 along the direction parallel to the b-axis and 6.83 and 8.00 eV along the direction parallel to the c-axis. [ABSTRACT FROM AUTHOR]