Search

Air in the headspace of sewer laterals can be driven by the flowing sewage as well as air pressure. In this study, the openings on manholes for air flow are approximated as a thin continuous slot at the laterals. In this way, the governing equations can be solved analytically for infinitely long laterals without water flow. For cases with water flow, a numerical solution is developed. It is found that the air flow pattern in a long lateral can be categorized into three zones. The zone closest to the trunk is defined as the "zone of influence," where the air flow in the lateral is dominated by air pressure, and the air pressure and air velocity decay exponentially in the lateral. The second zone is named as "zone of equilibrium" where the air pressure gradient is zero and the air flow is only driven by the drag of water and can be calculated analytically. The air flow zone farthest from the trunk is defined as the "zone of induction" where the air is inducted into the system for mass balance in the system. An explicit fitting expression on the air velocity and water velocity in a long lateral is provided. A graphic solution for air velocity and zone of influence is also developed for a quick estimation on the air movement in sewer laterals. [ABSTRACT FROM AUTHOR]

It is well known that model-building of chlorine decay in real water distribution systems is difficult because chlorine decay is influenced by many factors (e.g., bulk water demand, pipe-wall demand, piping material, flow velocity, and residence time). In this paper, experiments were run to investigate the kinetic model of chlorine decay and the formation model of trihalomethanes (THMs) in pilot-scale water distribution systems. Experimental results show that the rate constants of chlorine decay, including wall decay and bulk decay, increasing with temperature. Moreover, the kinetic model of chlorine decay and the formation model of THMs describe experiment data of pilot-scale water distribution systems. The effect of different piping material on chlorine decay and THMs formation were also investigated. The rate constants of chlorine decay are ranked in order: stainless steel pipe, ductile iron pipe, and last, polyethelene pipe because wall decay is the largest in stainless steel pipe than that in other piping material. Correspondingly, the rate of THMs formation follows the order of stainless steel pipe, ductile iron pipe, and last, polyethelene pipe because of less chlorine in bulk water reacting with the trihalomethane formation potential (THMFP). [ABSTRACT FROM AUTHOR]

Abstract: Three-dimensional (3D) TiO2 solid microspheres with different morphologies have been synthesized on a large scale by a simple hydrothermal method using titanium tetrachloride (TiCl4) as the titanium source and ammonium fluoride (NH4F) as the etchant. X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM) studies show that the 3D solid microspheres, with an average diameter from hundreds of nanometers to several micrometers, are composed of numerous anatase TiO2 particles. In addition, the morphologies of the as-prepared 3D solid microspheres can be controlled by adjusting the dosage of NH4F and the reaction temperatures. The present study has enlarged the family of 3D solid microspheres, and offers a possible route for the synthesis of other inorganic hierarchical structures. [ABSTRACT FROM AUTHOR]