Search

Based on the principle of multimode interference (MMI) imaging, an MMI waveguide reflector with high reflectivity, high bandwidth, and high process tolerance is designed using a lithium niobate thin film. The simulation results show that when the input light is transverse electric (TE) polarized, the maximum reflectivity of the designed MMI waveguide reflector is 96.5% at the working wavelength of 1.55 μm, and the bandwidth is 110 nm with more than 90% reflectivity. We also designed an experiment to measure its reflectivity. The experimental result of reflectivity is 85.24%. Compared with other proposed waveguide reflectors, it has the advantages of high reflectivity and large bandwidth. These results indicated that this optimized waveguide reflector design can be applied to integrated optical system based on lithium niobate thin film. • We obtain the optimal structural parameters of the waveguide reflector. • MMI waveguide reflector has high reflectivity and large bandwidth. • Increasing the bending radius can further improve the reflectivity. • It can provide flexibility for device design on lithium niobate thin film. [ABSTRACT FROM AUTHOR]

In this work, a transverse magnetic (TM)-pass polarizer based on subwavelength grating (SWG) on the emerging potential hybrid silicon-LNOI platform is proposed. By integrating silicon material onto the LNOI platform, the optical power of TE0 and TM0 modes is judiciously distributed to distinct regions. This design not only effectively blocks the TE0 mode but also enables low-loss transmission of the TM0 mode, thereby achieving a balanced manipulation of both polarizations. Due to the strong reflection of TE0 mode by SWG, a polarizer is realized with a high polarization extinction ratio (PER) and low insertion loss (73 dB and 0.37 dB respectively at 1550 nm) in a compact size (device length is 23.38 μm). Moreover, the PER is beyond 50 dB and the insertion loss is under 0.46 dB in a broad wavelength range of 1525 to 1585 nm. [ABSTRACT FROM AUTHOR]

In this paper, we present a full description of the design and fabrication of a compact spot-size converter (SSC) applied to interferometric fiber optic gyroscopes (IFOGs). The obtained SSC has a length of 500 um and a coupling efficiency of 52%. The polarization dependency of the SSC is less than 0.1 dB, and the variation tendencies of our experimental results agree well with a simulation. The SSC possesses many properties suitable for various optical communication and sensing systems, including small size, high coupling efficiency, integration, and high stability. [ABSTRACT FROM AUTHOR]

The rapid loading and manipulation of microspheres in optical trap is important for its applications in optomechanics and precision force sensing. We investigate the microsphere behavior under coaction of a dual-beam fiber-optic trap and a pulse laser beam, which reveals a launched microsphere can be effectively captured in a spatial region. A suitable order of pulse duration for launch is derived according to the calculated detachment energy threshold of pulse laser. Furthermore, we illustrate the effect of structural parameters on the launching process, including the spot size of pulse laser, the vertical displacement of beam waist and the initial position of microsphere. Our result will be instructive in the optimal design of the pulse-laser-assisted optical tweezers for controllable loading mechanism of optical trap. [ABSTRACT FROM AUTHOR]

We propose a monolithic integrated cavity optomechanical accelerometer based on push-pull photonic crystal zipper cavity. The accelerometer integrates grating couplers, phase modulators, acceleration sensing unit, and electrostatic force feedback module on a chip. We use push-pull structure to eliminate the coupling crosstalk caused by paraxial acceleration and extend its range using electrostatic force feedback module. The transmissive photonic crystal zipper cavity structure is adopted to improve the integration and stability of the system. Accurate results are demonstrated as follows: the bandwidth is larger than 20 kHz, the mechanical sensitivity is 369 pm/g, the measuring range is ±100 g, and the noise equivalent acceleration is 5.06 μg / Hz. With its advantages, the accelerometer can be used in consumer electronics, aerospace, resource exploration, and other fields. [ABSTRACT FROM AUTHOR]

We study the thermal-induced variance of effective refractive indices (ERIs) and birefringence in several kinds of polarization maintaining fibers (PMF) and carry out numerical simulations by utilizing the finite element method (FEM). Responses under varying temperatures in these fibers are analyzed thoroughly. According to our computational results, hollow-core photonic crystal fibers (HC-PCFs) exhibit much more stable temperature-dependent ERIs and birefringence among these PMFs. [ABSTRACT FROM AUTHOR]

Amorphophallus is widely distributed in Southeast Asia, Africa, and other places, with more than 170 species. Amorphophallus has high medicinal value and is commonly used in medicine. However, the current classification based on morphology is challenging in with regard to Amorphophallus and closely related species. This study used six barcodes, namely ITS2, matK, rcbL, nad1, trnH-psbA, and trnL-trnF, to evaluate their identification ability for three important Amorphophallus species, including A. konjac, A. albus, and A. muelleri. We recommend that trnH-psbA can be applied to the Amorphophallus trade, quickly identify the purity of A. konjac and A. albus and distinguish A. muelleri from its related species for A. konjac and A. albus genetic improvement. [ABSTRACT FROM AUTHOR]

An integrated optical chip (IOC) is the phase modulation actuator in a closed-loop interferometric fiber optic gyroscope (IFOG). Research on temperature characteristic of IOC is meaningful for high-precision IFOG working in harsh environment. We focus on the temperature modeling of the IOC modulation phase error. In theoretical analysis, based on the temperature dependence of the IOC equivalent capacitance, a model between IOC modulation phase error and temperature is proposed. Through experiments, the variation tendency of the IOC equivalent capacitance with temperature is first presented. Subsequently, the IOC modulation phase error is demonstrated to be linear with temperature, which verifies the effectiveness of the proposed model. We provide an error research direction of IOC for high-precision fiber optic gyroscopes. [ABSTRACT FROM AUTHOR]

In this study, a novel freeform surface lens coupler is designed to realize the coupling functions in the hollow‐core photonic crystal fiber (HCPCF) resonator optical gyroscope. One surface of the lens is an ellipsoid. Coupling of the two HCPCF loop's ports can be directly accomplished via reflection on the ellipsoid surface. The other surface of the lens is the Biconic Zernike surface. Transmitting through the above two surfaces, the coupling between the intracavity and extracavity is completed. In this paper, simulations were performed based on two types of HCPCFs, a hollow‐core photonic bandgap fiber of HC19‐1550 and a state‐of‐the‐art nested antiresonant nodeless fiber. The volume of the lens coupler is calculated to be approximately 4 × 2 × 4 mm3. The simulation results show that the intracavity coupling loss can be as low as 0.011 dB, and the coupling loss between the intracavity and extracavity can be as low as 0.4 dB. Compared with the traditional fusion scheme between hollow‐core fiber and polarization‐maintaining fiber, the freeform surface lens coupler in this paper can achieve lower coupling loss and higher resonance fineness. Compared with other spatial coupling schemes, it has lower coupling loss and fewer coupling components. [ABSTRACT FROM AUTHOR]

An integrated optical chip (IOC) is the phase modulation actuator in a closed-loop interferometric fiber optic gyroscope (IFOG). Research on temperature characteristic of IOC is meaningful for high-precision IFOG working in harsh environment. We focus on the temperature modeling of the IOC modulation phase error. In theoretical analysis, based on the temperature dependence of the IOC equivalent capacitance, a model between IOC modulation phase error and temperature is proposed. Through experiments, the variation tendency of the IOC equivalent capacitance with temperature is first presented. Subsequently, the IOC modulation phase error is demonstrated to be linear with temperature, which verifies the effectiveness of the proposed model. We provide an error research direction of IOC for high-precision fiber optic gyroscopes. [ABSTRACT FROM AUTHOR]

Environmental factors, such as culture, are known to shape individual variation in brain activity including spontaneous activity, but less is known about their population-level effects. Eastern and Western cultures differ strongly in their cultural norms about relationships between individuals. For example, the collectivism, interdependence and tightness of Eastern cultures relative to the individualism, independence and looseness of Western cultures, promote interpersonal connectedness and coordination. Do such cultural contexts therefore influence the group-level variability of their cultural members' spontaneous brain activity? Using novel methods adapted from studies of inter-subject neural synchrony, we compare the group-level variability of resting state EEG dynamics in Chinese and Canadian samples. We observe that Chinese subjects show significantly higher inter-subject correlation and lower inter-subject distance in their EEG power spectra than Canadian subjects, as well as lower variability in theta power and alpha peak frequency. We demonstrate, for the first time, different relationships among subjects' resting state brain dynamics in Chinese and Canadian samples. These results point to more idiosyncratic neural dynamics among Canadian participants, compared with more shared neural features in Chinese participants. [ABSTRACT FROM AUTHOR]

We theoretically analyze the performances of the anti-PT-symmetric gyroscope near the exceptional point (EP). The results show that the frequency splitting caused by rotation is proportional to the square root of the fraction of power coupled from the bus to the ring. To fully exploit the potential of the EP, one needs to overcome two aspects of challenges. The first one is the preparation of sensitive unit, to detect the angular velocity of 104 deg / h with a micron-scale sensor; the allowable variation in the ratio of cavities' radii is within the order of 10 − 16, which is exceedingly challenging in current nano fabrication. The other is controlling environmental disturbances. A temperature variation of 0.002°C would make the minimum detectable rotation rate up to 1010 deg / h, which is far beyond practically applications. Our analysis points out the difficulties in realizing this gyroscope, which has significant referential values to future work. [ABSTRACT FROM AUTHOR]

Optical sensors, such as fiber interferometers transmit along light paths and perform measurements based on optical path difference. These types of sensors can reduce device volume and improve sensing performance using optical multiplexing. A beam splitter for optical path multiplexing in an optical fiber ring is proposed. A photonic crystal was used to design the beam splitter. By optimizing and improving the photonic crystal microstructure, the beam splitting function can be realized while taking into account the cycling capability. Therefore, the light can recirculate multiple times in the fiber ring to realize light path multiplexing. The finite difference time domain method is used to analyze and evaluate the performance of the beam splitter. [ABSTRACT FROM AUTHOR]

Software compensation is an effective method for enhancing the magnetic field environment adaptability of light-small fiber-optic gyroscope (FOG). In order to decrease the magnetic drift of FOG, an accurate magnetic sensor is typically required to measure the intensity of magnetic field in this software compensation method. The magnetic sensor generally suffers from the measurement error due to the variety of temperature. In order to compensate the magnetic drift of FOG preferably in full temperature range (−40 °C to +60 °C), the temperature sensitivity of the Hall sensor manufactured by Allegro is studied in this paper. Temperature compensation models of quescent voltage output and magnetic sensitivity are established, and the variation is compensated respectively. The measurement precision of Hall sensor is 0.02 G over the temperature from −40 °C to 60 °C after compensation, which meets the requirement of magnetic drift compensation of FOG in full temperature. [ABSTRACT FROM AUTHOR]

• Laser frequency drift characteristics, such as fluctuation range and frequency, influence the performance of the closed-loop frequency-locked module. • A novel measurement system is proposed, based on the Fabry–Pérot cavity and sinusoidal modulation of cavity length and demodulation by LIA. • This measurement scheme can be applied in other fiber sensor systems to evaluate the effect of laser frequency stability. In this study, to measure the frequency drift characteristics of the narrow-linewidth laser, we provide a method with high accuracy and adjustable measuring range that can be applied in a resonant optical gyro (ROG) system. In an ROG system, the laser frequency drift characteristics, such as fluctuation range and frequency, influence the performance of the closed-loop frequency-locked module. To measure the above performance of the laser, we proposed a novel measurement system based on the Fabry–Pérot cavity. We proved the feasibility of the scheme through theory and simulation. Then, the calibration of the experimental device and the measurement of the tested laser were completed. The measurement accuracy of this method is 1.2 kHz, and the measurement range reaches ±60 MHz, which can be adjusted by the modulation index. The results show that the laser has a frequency fluctuation of 30 MHz in the stabilization stage, and there is mainly a low-frequency component under 5 Hz in the frequency domain of the laser frequency fluctuation. Furthermore, this measurement scheme can be applied in other fiber sensor systems to evaluate the effect of laser frequency fluctuation on system output performance. [ABSTRACT FROM AUTHOR]