Search

This technical innovation assesses the adaptability of some common automated segmentation tools on abnormal pediatric magnetic resonance (MR) brain scans. We categorized 35 MR scans by pathologic features: (1) "normal"; (2) "atrophy"; (3) "cavity"; (4) "other." The following three tools, (1) Computational Anatomy Toolbox version 12 (CAT12); (2) Statistical Parametic Mapping version 12 (SPM12); and (3) MRTool, were tested on each scan-with default and adjusted settings. Success was determined by radiologist consensus on the surface accuracy. Automated segmentation failed in scans demonstrating severe surface brain pathology. Segmentation of the "cavity" group was ineffective, with success rates of 23.1% (CAT12), 69.2% (SPM12) and 46.2% (MRTool), even with refined settings and manual edits. Further investigation is required to improve this workflow and automated segmentation methodology for complex surface pathology., (© 2023. The Author(s).)

Three-dimensional (3D) printed models of anatomic structures offer an alternative to studying manufactured, "idealized" models or cadaveric specimens. The utility of 3D printed models of the heart for clinical veterinary students learning echocardiographic anatomy is unreported. This study aimed to assess the feasibility and utility of 3D printed models of the canine heart as a supplementary teaching aid in final-year vet students. We hypothesized that using 3D printed cardiac models would improve test scores and feedback when compared with a control group. Students ( n = 31) were randomized to use either a video guide to echocardiographic anatomy alongside 3D printed models (3DMs) or video only (VO). Prior to a self-directed learning session, students answered eight extended matching questions as a baseline knowledge assessment. They then undertook the learning session and provided feedback (Likert scores and free text). Students repeated the test within 1 to 3 days. Changes in test scores and feedback were compared between 3DM and VO groups, and between track and non-track rotation students. The 3DM group had increased test scores in the non-track subgroup. Track students' test scores in the VO group increased, but not in the 3DM group. Students in the 3DM group had a higher completion rate, and more left free-text feedback. Feedback from 3DM was almost universally positive, and students believed more strongly that these should be used for future veterinary anatomy teaching. In conclusion, these pilot data suggest that 3D printed canine cardiac models are feasible to produce and represent an inclusive learning opportunity, promoting student engagement.

Studying anatomical shape progression over time is of utmost importance to refine our understanding of clinically relevant processes. These include vascular remodeling, such as aortic dilation, which is particularly important in some congenital heart defects (CHD). A novel methodological framework for three-dimensional shape analysis has been applied for the first time in a CHD scenario, i.e., bicuspid aortic valve (BAV) disease, the most common CHD. Three-dimensional aortic shapes (n = 94) reconstructed from cardiovascular magnetic resonance imaging (MRI) data as surface meshes represented the input for a longitudinal atlas model, using multiple scans over time (n = 2-4 per patient). This model relies on diffeomorphism transformations in the absence of point-to-point correspondence, and on the right combination of initialization, estimation and registration parameters. We computed the shape trajectory of an average disease progression in our cohort, as well as time-dependent parameters, geometric variations and the average shape of the population. Results cover a spatiotemporal spectrum of visual and numerical information that can be further used to run clinical associations. This proof-of-concept study demonstrates the feasibility of applying advanced statistical shape models to track disease progression and stratify patients with CHD., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: In the UK, undergraduate paediatric training is brief, resulting in trainees with a lower paediatric knowledge base compared with other aspects of medicine. With congenital conditions being successfully treated at childhood, adult clinicians encounter and will need to understand these complex pathologies. Patient-specific 3D printed (3DP) models have been used in clinical training, especially for rarer, complex conditions. We perform a systematic review to evaluate the evidence base in using 3DP models to train paediatricians, surgeons, medical students and nurses., Methods: Online databases PubMed, Web of Science and Embase were searched between January 2010 and April 2020 using search terms relevant to "paediatrics", "education", "training" and "3D printing". Participants were medical students, postgraduate trainees or clinical staff. Comparative studies (patient-specific 3DP models vs traditional teaching methods) and non-comparative studies were included. Outcomes gauged objective and subjective measures: test scores, time taken to complete tasks, self-reported confidence and personal preferences on 3DP models. If reported, the cost of and time taken to produce the models were noted., Results: From 587 results, 15 studies fit the criteria of the review protocol, with 5/15 being randomised controlled studies and 10/15 focussing on cardiovascular conditions. Participants using 3DP models demonstrated improved test scores and faster times to complete procedures and identify anatomical landmarks compared with traditional teaching methods (2D diagrams, lectures, videos and supervised clinical events). User feedback was positive, reporting greater user self-confidence in understanding concepts with users wishing for integrated use of 3DP in regular teaching. Four studies reported the costs and times of production, which varied depending on model complexity and printer. 3DP models were cheaper than 'off-the-shelf' models available on the market and had the benefit of using real-world pathologies. These mostly non-randomised and single-centred studies did not address bias or report long-term or clinically translatable outcomes., Conclusions: 3DP models were associated with greater user satisfaction and good short-term educational outcomes, with low-quality evidence. Multicentred, randomised studies with long-term follow-up and clinically assessed outcomes are needed to fully assess their benefits in this setting., Prospero Registration Number: CRD42020179656., Competing Interests: Competing interests: None declared., (© Author(s) (or their employer(s)) 2021. Re-use permitted under CC BY. Published by BMJ.)

Two patients with bicuspid aortic valve were selected for aortic valve repair using the Ozaki procedure. Patient-specific models of their aortic roots were generated based on computed tomography data and were 3-dimensional printed using a flexible resin. The models allowed sizing of the valve leaflets and practicing of leaflet suturing. ( Level of Difficulty: Advanced. )., (© 2020 The Authors.)

Small extracellular vesicles (sEVs) are those nanovesicles 30-150 nm in size with a role in cell signalling and potential as biomarkers of disease. Nanoparticle tracking analysis (NTA) techniques are commonly used to measure sEV concentration in biofluids. However, this quantification technique can be susceptible to sample handing and machine settings. Moreover, some classes of lipoproteins are of similar sizes and could therefore confound sEV quantification, particularly in blood-derived preparations, such serum and plasma. Here we have provided methodological information on NTA measurements and systematically investigated potential factors that could interfere with the reliability and repeatability of results obtained when looking at neat biofluids (i.e., human serum and pericardial fluid) obtained from patients undergoing cardiac surgery and from healthy controls. Data suggest that variables that can affect vesicle quantification include the level of contamination from lipoproteins, number of sample freeze/thaw cycles, sample filtration, using saline-based diluents, video length and keeping the number of particles per frame within defined limits. Those parameters that are of less concern include focus, the "Maximum Jump" setting and the number of videos recorded. However, if these settings are clearly inappropriate the results obtained will be spurious. Similarly, good experimental practice suggests that multiple videos should be recorded. In conclusion, NTA is a perfectible, but still commonly used system for sEVs analyses. Provided users handle their samples with a highly robust and consistent protocol, and accurately report these aspects, they can obtain data that could potentially translate into new clinical biomarkers for diagnosis and monitoring of cardiovascular disease., (Copyright © 2020 Shearn, Aday, Ben-Aicha, Carnell-Morris, Siupa, Angelini, Clayton, Boulanger, Punjabi, Emanueli and Biglino.)

This article presents a case series of n = 21 models of fetal cardiovascular anatomies obtained from post mortem microfocus computed tomography (micro-CT) data. The case series includes a broad range of diagnoses (e.g., tetralogy of Fallot, hypoplastic left heart syndrome, dextrocardia, double outlet right ventricle, atrio-ventricular septal defect) and cases also had a range of associated extra-cardiac malformations (e.g., VACTERL syndrome, central nervous system anomalies, renal anomalies). All cases were successfully reconstructed from the microfocus computed tomography data, demonstrating the feasibility of the technique and of the protocols, including in-house printing with a desktop 3D printer (Form2, Formlabs). All models were printed in 1:1 scale as well as with the 5-fold magnification, to provide insight into the intra-cardiac structures. Possible uses of the models include education and training., (Copyright © 2020 Sandrini, Lombardi, Shearn, Ordonez, Caputo, Presti, Luciani, Rossetti and Biglino.)

3D printing has recently become an affordable means of producing bespoke models and parts. This has now been extended to models produced from medical imaging, such as computed tomography (CT). Here we report the production of a selection of 3D models to compliment the available imaging data for a 12-month-old child with double-outlet right ventricle and two ventricular septal defects. The models were produced to assist with case management and surgical planning. We used both stereolithography and polyjet techniques to produce white rigid and flexible color models, respectively. The models were discussed both at the joint multidisciplinary meeting and between surgeon and cardiologist. From the blood pool model the clinicians were able to determine that the position of the coronary arteries meant an arterial switch operation was unlikely to be feasible. The soft myocardium model allowed the clinicians to assess the VSD anatomy and relationship with the aorta. The models, therefore, were of benefit in the development of the surgical plan. It was felt that the clinical situation was stable enough that an immediate intervention was not required, but the timing of any intervention would be dictated by decreasing oxygen saturation. Subsequently, the oxygen saturation of the patient did decrease and the decision was made to intervene. A further model was created to demonstrate the tricuspid apparatus. An arterial switch was ultimately performed without the LeCompte maneuver, the muscular VSD enlarged and baffled into the neo aortic root and the perimembranous VSD closed. At 1 month follow up SO 2 was 100%, there was no breathlessness and no echocardiogram changes.