Search

Thermal insulation material (TIM) is commonly employed to enhance the thermal behavior of the lightweight walls. To further obtain the energy-saving effect of the walls, the composite wall (ATIM) combined autoclaved aerated concrete (AAC) block with TIM was present in this study. A testing rig with an ATIM wall was constructed and tested in summer design days, while the numerical modeling was developed and validated using the experimental data. Furthermore, reference walls of the brick and AAC with the same dimension as the ATIM wall were established to evaluate its thermal behavior. The thermal behavior and economic evaluation of the ATIM wall were then investigated by varying the thickness and position of the TIM using the numerical method. And the research results indicated that: (1) the average inner surface temperature of the ATIM wall is approximately 1.1 °C lower than that of the AAC wall, 1.3 °C lower than that of brick wall, the thickness of TIM is positively correlated with decreasing wall surface temperature, while TIM positions have minimal impact on reducing surface temperature; (2) heat gain reduction ratio for ATIM wall (δ = 20 mm) is approximately 52.7%, which is 8.1% higher than that of AAC wall, and variation in TIM position can decrease the heat gain, with inside or outside placement being more effective than positioning it in the middle part; (3) CO2 emission saving (CO2ES) and electricity cost saving (ECS) for room C (ATIM wall) is approximately 7.05 kg/100 m3/day and 5.23 RMB/100 m3/day, respectively, outperforming room A (brick wall) and room B (AAC wall) in terms of energy efficiency and economic benefits.

It is difficult and costly to treat landfill leachate, but combining a certain amount of landfill leachate with proper scale of municipal sewage can reduce the burden of landfill leachate treatment in incineration plants, which can also supplement carbon source for municipal sewage plants with large amount of sewage and generally low C/N. In this study, the hydrolytic acidification (HA)– sequencing batch reactors (SBR)–membrane bioreactor (MBR) was employed to treat mixed municipal sewage and landfill leachate, and the effect of the system on pollutant removal and membrane fouling development was investigated without any physical or chemical cleaning of the membrane. The results of the average COD, TN, NH3–N, total phosphorus, and turbidity removal rates of the HA-SBR-MBR process were 95.1%, 61.9%, 97.5%, 91.1%, and 99.2%, respectively, shown under the conditions of the leachate ratio of 0.17%, pH of 6.56–7.10, hydrolysis time of 12- and 6-h SBR operating cycle. Hence, the pollutant removal efficiencies and effluent quality of the HA-SBR-MBR system were found to be excellent under these conditions, and the membrane separation process enhanced the efficacy of the system. During the operation of the system, membrane modules were used to intermittently filter the supernatant during the late period of the settlement stage, which maintained the stability of the membrane’s filtration performance. The membrane fouling rate developed slowly, and the total membrane filtration resistance increased from the original 2.34 × 1012to 5.03 × 1012m–1.