Search

Objectives: Bone graft materials commonly used for maxillary sinus floor augmentation (MSFA), including hydroxyapatite (HAp) and β-tricalcium phosphate (β-TCP), are mostly granular and have poor handleability. HAp/collagen composite material (HAp/Col) and β-tricalcium phosphate (β-TCP)/poly(L-lactide-co-glycolide) (PLGA) have shown promise but their application in MSFA as bone graft materials remains unclear. Here, we investigated the bone-forming behavior of HAp/Col and β-TCP/PLGA in an MSFA rabbit model., Methods: Male Japanese white rabbits were used. HAP/Col or β-TCP/PLGA was randomly applied to the MSFA model. The specimens were harvested at 4 weeks (W), 8W, 16W, and 24W after surgery, and the augmented regions were evaluated using micro-computed tomography and histological analyses., Results: The graft materials were retained up to 16W in the HAp/Col group and 24W in the β-TCP/PLGA group. The augmented volume detected in the HAp/Col group at 4W was substantially reduced at subsequent time points. However, in the β-TCP/PLGA group, the volume observed at 4W was maintained up to 24W. In the HAp/Col group, the bone mineral content (BMC) at 4W was significantly lower than that at 8W (p=0.03716), and this elevated BMC was significantly decreased at 16W (p=0.00185) and 24W (p=0.00236). In the β-TCP/PLGA group, the BMC tended to increase from 4W to 16W and then decreased., Conclusions: Both HAp/Col and β-TCP/PLGA are useful for MSFA because of their ability to form new bone and good handleability. The appropriate graft material should be selected depending on the application needs while understanding the properties of the newly formed bone., (Copyright © 2024. Published by Elsevier B.V.)

Cases of relatively safe dental implant treatment in patients with low-volume bisphosphonate (BP) have been gradually reported. Although bone augmentation is commonly used when the bone volume is insufficient for implant placement, the studies and case reports regarding the safety of bone augmentation in patients treated with BP remain insufficient. Herein, we report a case wherein bone augmentation was performed after BP treatment with bone healing realized according to imaging, and we review the literature regarding BP and bone augmentation. A 67-year-old Japanese woman requested implant treatment for a hopeless lower right second molar. She had been taking minodronic acid hydrate (50 mg/4 wk) for 18 months to treat steroid-induced osteoporosis. After obtaining informed consent, tooth extraction and bone augmentation within the extraction socket were performed. The tooth was extracted atraumatically to preserve the surrounding alveolar bone, and the extraction socket was intensely curetted. Subsequently, the socket was filled with carbonate apatite granules and covered with a biodegradable membrane, and the wound was sutured without tension. Although protracted wound healing without any symptoms of infection was observed, the wound healed completely. No clinical symptoms were observed, the color of the mucosa at the site was healthy, and imaging findings at 6 months postoperation indicated that osteogenesis had progressed uneventfully.

The titanium osteosynthesis system used for fixing bone segments after maxillary osteotomy provides reliable outcomes owing to its biocompatibility and adequate strength. In addition, several studies have evaluated the skeletal stability after maxillary osteotomy with fixation using a biodegradable system. However, the indications for applying a biodegradable system after maxillary osteotomy remain controversial. Therefore, this study aimed to compare the long-term skeletal stability of bone segments after maxillary osteotomy with bone fixation using biodegradable and titanium osteosynthesis systems and to assess the usefulness of a biodegradable osteosynthesis system. Patients who underwent Le Fort I osteotomy of the maxilla to correct jaw deformities between April 2008 and March 2021 were included in this study. A total of 45 patients were included, with 28 in the biodegradable osteosynthesis system group and 17 in the titanium group. Cephalometric and computed tomography analyses were performed to evaluate the skeletal stability of the bone segments after maxillary osteotomy with bone fixation using biodegradable or titanium osteosynthesis systems. The maxillary segment was repositioned anteriorly with a clockwise rotation. Skeletal stability was similar between the biodegradable and titanium osteosynthesis systems. Segmental changes occurred mainly in the first 6 months after surgery, and the segment was completely stable between 6 and 12 months after surgery. This study revealed no significant differences in skeletal stability after maxillary osteotomy between the biodegradable and titanium osteosynthesis systems. However, the findings in this study should be interpreted with caution owing to the small sample size and small amount of maxillary-segment movement., Competing Interests: The authors report no conflicts of interest., (Copyright © 2024 by Mutaz B. Habal, MD.)

The treatment of mandibular deformities with an anterior open bite is challenging. In this study, skeletal stability after mandibular osteotomies was evaluated to determine the best treatment for mandibular prognathism with an anterior open bite in three procedures: intraoral vertical ramus osteotomy (IVRO), conventional sagittal split ramus osteotomy (conv-SSRO), and SSRO without bone fixation (nonfix-SSRO). Patients who underwent mandibular osteotomy to correct skeletal mandibular protrusion were included. Changes in skeletal and soft tissues were assessed using lateral cephalograms taken before (T1), 3 ± 2 days (T2), and 12 ± 3 months (T3) after surgery. Thirty-nine patients were included: nine in the IVRO group and 11 and 19 in the conv- and nonfix-SSRO groups, respectively. The mandibular plane angles (MPAs) of the T2-T1 were - 2.7 ± 2.0 (p = 0.0040), - 3.7 ± 1.7 (p < 0.0001), and - 2.3 ± 0.7 (p < 0.0001) in the IVRO, conv-SSRO, and nonfix-SSRO groups, respectively. The skeletal relapse of the MPAs was not related to the MPA at T2-T1, and it was approximately 1.3° in the conv-SSRO group. The skeletal relapse of the MAPs was significantly correlated with the MPA of T2-T1 in the IVRO (p = 0.0402) and non-fix-SSRO (p = 0.0173) groups. When the relapse of the MPAs was less than 1.3°, the MPA of T2-T1 was calculated as 2.5° in the nonfix-SSRO group. When the MPA of T2-T1 is less than 2.5°, non-fix SSRO may produce a reliable outcome, and when it is more than 2.5°, conv-SSRO may produce better outcomes., (© 2023. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)

There is no treatment algorithm to decide whether maxillomandibular or mandibular osteotomy alone should be performed in borderline cases. This study assessed the factors that affect the changes in soft tissue after mandibular setback. Patients who underwent mandibular osteotomy alone to correct mandibular protrusion were included in this study. Hard and soft tissue analyses were performed on lateral cephalograms before and 12±3 months after surgery. The popular points were set for referencing hard and soft tissues on the lateral cephalogram. Nasolabial, labiomental, and soft tissue facial plane angles were measured for the soft tissue assessment. To assess the mandibular setback amount, SNB was calculated. Twenty-one patients were included in this study. The nasolabial angle was increased after surgery and its change significantly correlated with the change in SNB ( P =0.00815). The change in soft tissue facial plane angle after surgery per change in SNB significantly correlated with the occlusal plane angle ( P =0.0009). An occlusal plane angle of at least 15.45 degrees was required for the SNB and soft tissue facial plane angle to change to the same degree. The occlusal plane angle (whether or not it was ≥15.45 degrees) may help in determining the surgical approach in borderline cases, specifically on whether maxillomandibular or mandibular osteotomy alone should be performed if the mandibular setback is simple., Competing Interests: The authors report no conflicts of interest., (Copyright © 2023 by Mutaz B. Habal, MD.)

Biodegradable guided bone regeneration (GBR) membranes consist primarily of collagen and aliphatic polyesters. This study assessed the comparative efficacy of a poly(l-lactic-caprolactone) [P(LA/CL)] membrane versus that of a collagen membrane in GBR. Patients requiring GBR simultaneously or before dental implant placement in edentulous regions were randomly assigned to one of two membranes. Within each membrane, they were subdivided into 3 groups: dental implants were placed simultaneously with GBR in groups A and B, and 180 days post-GBR in group C. The augmented bone width was measured at 1, 3, and 6 mm from the implant's neck (groups A and B) or the reference line (group C), utilizing cone-beam computed tomography images, immediately and 150 days post-surgery. A histological study was performed to evaluate bone formation in group C. No adverse events were observed. In the collagen group, the absorbed ratios of the augmented bone were 40.9 ± 36.7%, 29.4 ± 30.1%, and 11.1 ± 22.0% at 1, 3, and 6 mm, respectively; the ratio at 6 mm was significantly lower than that at 1 mm ( p = 0.0442). In the P(LA/CL) group, those were 26.2 ± 27.3%, 17.1 ± 19.7%, and 13.3 ± 16.4% at 1, 3, and 6 mm, respectively, with no significant difference at each point. No significant inter-membrane differences were observed. The bone augmentation potential of the P(LA/CL) membrane matched that of the collagen membrane. P(LA/CL) could be used as a safe and effective membrane in GBR.

Background: Oral squamous cell carcinoma (OSCC) treatment consists mainly of surgery, chemotherapy, and radiotherapy, alone or in combination. Epithelial dysplasia (ED) is also treated with surgery. However, these treatments can induce functional and/or aesthetic disturbances. Photodynamic therapy (PDT) can preserve organs. Although short-term studies have shown good progress, long-term evaluations have not yet been conducted. This study aimed to clarify the long-term effects of PDT on OSCC and ED., Methods: Patients who underwent PDT with the first (porfimer sodium) or second generation photosensitizers (talaporfin sodium) for early OSCC (T1 and T2) and ED were included in this study. The long-term prognosis was assessed., Results: Twenty-three patients were included. Complete response (CR) was observed in 19 patients (82.6%) and partial response (PR) in 4 patients (17.4%) 4 weeks after PDT. Regarding long-term progress, local region recurrence occurred in 11 of 19 CR cases (57.9%), and the term of recurrence was 27.4 ± 30.4 months. Surgical resection was performed in all local recurrence and PR cases, and 3 patients died of the underlying disease., Conclusions: PDT provides a good outcome in the short term, but its long-term effects are limited., Competing Interests: Declaration of Competing Interests The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The aim of this study was to clarify the effects of three different orthognathic surgical procedures on the temporomandibular joint after mandibular setback. Conventional sagittal split ramus osteotomy (SSRO) with segmental fixation (conv-SSRO), intraoral vertical ramus osteotomy (IVRO), or SSRO without fixation followed by the physiological positioning strategy (nonfix-SSRO) was performed for mandibular setback. Temporomandibular joint disorder (TMD) symptoms were clinically assessed, and the condylar head angle was measured. In total, 129 patients participated. Preoperative TMD and treatment procedure were related to postoperative TMD. A menton deviation of 3.43 mm was the cutoff for the risk of postoperative TMD. The incidence rate of postoperative TMD in the conv-SSRO group was higher than that in the IVRO (p = 0.0197) and nonfix-SSRO (p = 0.0001) groups in asymmetric cases. There was no significant postoperative change in the temporomandibular joint space in each group. In symmetric and asymmetric cases, the condylar head was rotated inwards by 5.82 ± 4.75° (p < 0.0001) and 5.44 ± 3.10° (p < 0.0001), respectively, in the conv-SSRO group, and outwards by -7.98 ± 5.05° (p < 0.0001) and -8.32 ± 6.38° (p < 0.0001), respectively, in the IVRO group, but it was almost stable in the nonfix-SSRO group. Within the limitations of the study it seems that nonfix-SSRO should be preferred over conv-SSRO and IVRO whenever appropriate., Competing Interests: Declaration of competing interest None to declare., (Copyright © 2022 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.)

We have developed nanoballs, a biocompatible self-assembly nano-vector based on electrostatic interactions that arrange anionic macromolecules to polymeric nanomaterials to create nucleic acid carriers. Nanoballs exhibit low cytotoxicity and high transfection efficiently in vivo. This study investigated whether a gene-activated matrix (GAM) composed of nanoballs containing plasmid (p) DNAs encoding bone morphogenetic protein 4 (pBMP4) could promote bone augmentation with a small amount of DNA compared to that composed of naked pDNAs. We prepared nanoballs (BMP4-nanoballs) constructed with pBMP4 and dendrigraft poly-L-lysine (DGL, a cationic polymer) coated by γ-polyglutamic acid (γ-PGA; an anionic polymer), and determined their biological functions in vitro and in vivo. Next, GAMs were manufactured by mixing nanoballs with 2% atelocollagen and β-tricalcium phosphate (β-TCP) granules and lyophilizing them for bone augmentation. The GAMs were then transplanted to rat cranial bone surfaces under the periosteum. From the initial stage, infiltrated macrophages and mesenchymal progenitor cells took up the nanoballs, and their anti-inflammatory and osteoblastic differentiations were promoted over time. Subsequently, bone augmentation was clearly recognized for up to 8 weeks in transplanted GAMs containing BMP4-nanoballs. Notably, only 1 μg of BMP4-nanoballs induced a sufficient volume of new bone, while 1000 μg of naked pDNAs were required to induce the same level of bone augmentation. These data suggest that applying this anionic vector to the appropriate matrices can facilitate GAM-based bone engineering.

Gene-activated matrix (GAM) has a potential usefulness in bone engineering as an alternate strategy for the lasting release of osteogenic proteins but efficient methods to generate non-viral GAM remain to be established. In this study, we investigated whether an atelocollagen-based GAM containing naked-plasmid ( p ) DNAs encoding microRNA (miR) 20a, which may promote osteogenesis in vivo via multiple pathways associated with the osteogenic differentiation of mesenchymal stem/progenitor cells (MSCs), facilitates rat cranial bone augmentation. First, we confirmed the osteoblastic differentiation functions of generated p DNA encoding miR20a ( p miR20a) in vitro , and its transfection regulated the expression of several of target genes, such as Bambi1 and PPARγ, in rat bone marrow MSCs and induced the increased expression of BMP4. Then, when GAMs fabricated by mixing 100 μl of 2% bovine atelocollagen, 20 mg β-TCP granules and 0.5 mg (3.3 μg/μl) AcGFP plasmid-vectors encoding miR20a were transplanted to rat cranial bone surface, the promoted vertical bone augmentation was clearly recognized up to 8 weeks after transplantation, as were upregulation of VEGFs and BMP4 expressions at the early stages of transplantation. Thus, GAM-based miR delivery may provide an alternative non-viral approach by improving transgene efficacy via a small sequence that can regulate the multiple pathways., (© The Author(s) 2021. Published by Oxford University Press.)

The aim of this study was to clarify whether hydroxyapatite/collagen composite material (HAp/Col) could be useful as a graft material for maxillary sinus floor augmentation (MSFA). MSFA and implant placement were performed simultaneously. When the lateral approach was employed, 3 out of 19 implants failed in 3 maxillary sinuses (success rate; 84.2%), and in these cases the alveolar bone heights, cortical bone thicknesses and values of the implant stability quotient were smaller. If alveolar the bone height, cortical bone thickness, and healing period are optimized, HAp/Col can be a useful graft material for MSFA.