Search

Objective Testicular fat deposition has been reported to affect animal reproduction. However, the underlying mechanism remains poorly understood. The present study explored whether sperm meiosis and testosterone synthesis contribute to mouse testicular fat deposition-induced reproductive performance. Methods High fat diet (HFD)-induced obesity CD1 mice (DIO) were used as a testicular fat deposition model. The serum hormone test was performed by agent kit. The quality of sperm was assessed using a Sperm Class Analyzer. Testicular tissue morphology was analyzed by histochemical methods. The expression of spermatocyte marker molecules was monitored by an immuno-fluorescence microscope during meiosis. Analysis of the synthesis of testosterone was performed by real-time polymerase chain reaction and reagent kit. Results It was found that there was a significant increase in body weight among DIO mice, however, the food intake showed no difference compared to control mice fed a normal diet (CTR). The number of offspring in DIO mice decreased, but there was no significant difference from the CTR group. The levels of follicle-stimulating hormone were lower in DIO mice and their luteinizing hormone levels were similar. The results showed a remarkable decrease in sperm density and motility among DIO mice. We also found that fat accumulation affected the meiosis process, mainly reflected in the cross-exchange of homologous chromosomes. In addition, overweight increased fat deposition in the testis and reduced the expression of testosterone synthesis-related enzymes, thereby affecting the synthesis and secretion of testosterone by testicular Leydig cells. Conclusion Fat accumulation in the testes causes testicular cell dysfunction, which affects testosterone hormone synthesis and ultimately affects sperm formation. Keywords Cholesterol Metabolism, Overweight, Spermatogenesis, Testosterone

Green technology innovation (GTI) is one of the most important factors influencing agricultural carbon emission intensity (ACEI). Various studies have explored the impact of GTI on ACEI, but the path mechanism has not been fully explained. This study incorporates GTI and ACEI into the constant elasticity of substitution (CES) production function and constructs a theoretical model to analyse their direct impact mechanisms. Drawing on the substitution effect theory and the Marshall–Arrow–Romer (MAR) externalities theory, this study introduces two regulatory mechanisms: optimization of energy structure and agricultural industry agglomeration (AIG). Additionally, it explores the pathway mechanisms under the influence of spatial spillover effects based on Tobler’s first law of geography. Then, taking Jiangsu Province in China as a case study, empirical tests are conducted using LSDVC and dynamic spatial SAR models. The results are as follows. (1) GTI effectively inhibits ACEI directly, and has significantly positive spatial spillover effects on ACEI reduction in the short and long terms. (2) Energy structure optimization positively regulates the effect of GTI on ACEI reduction, and energy structure optimization in nearby cities may help GTI restrain ACEI in the local city in the short term. (3) AIG has a positive regulating effect on GTI reducing ACEI, and the moderating effect of AIG has positive spillover effects in the short term. (4) When both regulatory pathways are employed simultaneously, the moderating effect of AIG in local or neighbouring areas is expected to become ineffective. These findings are useful for solving the problem of ACEI reduction by managing the transfer and distribution of GTI between different regions, considering spatial spillover and moderating effects.

In this study, we have successfully constructed Ag3PO4/Ag/g-C3N4 heterojunctions via the hydrothermal method, which displays a wide photo-absorption range. The higher photocurrent intensity of Ag3PO4/Ag/g-C3N4 indicates that the separation efficiency of the photogenerated electron–hole pairs is higher than that of both Ag3PO4 and Ag/g-C3N4 pure substances. It is confirmed that the efficient separation of photogenerated electron–hole pairs is attributed to the heterojunction of the material. Under visible light irradiation, Ag3PO4/Ag/g-C3N4-1.6 can remove MO (~90%) at a higher rate than Ag3PO4 or Ag/g-C3N4. Its degradation rate is 0.04126 min−1, which is 4.23 and 6.53 times that of Ag/g-C3N4 and Ag3PO4, respectively. After five cycles of testing, the Ag3PO4/Ag/g-C3N4 photocatalyst still maintained high photocatalytic activity. The excellent photocatalysis of Ag3PO4/Ag/g-C3N4-1.6 under ultraviolet-visible light is due to the efficient separation of photogenerated carriers brought about by the construction of the Ag3PO4/Ag/g-C3N4 heterostructure. Additionally, Ag3PO4/Ag/g-C3N4 specimens can be easily recycled with high stability. The effects of hydroxyl and superoxide radicals on the degradation process of organic compounds were studied using electron paramagnetic resonance spectroscopy and radical quenching experiments. Therefore, the Ag3PO4/Ag/g-C3N4 composite can be used as an efficient and recyclable UV-vis spectrum-driven photocatalyst for the purification of organic pollutants.

The Ag3PO4/CoFe1.95Y0.05O4 nanocomposite with magnetic properties was simply synthesized by the hydrothermal method. The structure and morphology of the prepared material were characterized, and its photocatalytic activity for degradation of the methylene blue and rhodamine B dyes was also tested. It was revealed that the Ag3PO4 in the nanocomposite exhibited a smaller size and higher efficiency in degrading dyes than the individually synthesized Ag3PO4 when exposed to light. Furthermore, the magnetic properties of CoFe1.95Y0.05O4 enabled the nanocomposite to possess magnetic separation capabilities. The stable crystal structure and effective degradation ability of the nanocomposite were demonstrated through cyclic degradation experiments. It was shown that Ag3PO4/CoFe1.95Y0.05O4–0.2 could deliver the highest activity and stability in degrading the dyes, and 98% of the dyes could be reduced within 30 min. Additionally, the photocatalytic enhancement mechanism and cyclic degradation stability of the magnetic nanocomposites were also proposed.

The geopolymerization of aluminosilicate materials in alkaline environments is a complex physicochemical process that greatly influences the microstructure and engineering performances. This work aims to reveal the geopolymerization process of metakaolin-based geopolymer (MKG) in the first 5 d. Physicochemical characteristics of different evolution stages are disposed of in chronological order. The evolutions of electrical resistivity, dehydration process, volume deformation, and ionic concentration are comprehensively analyzed. Results show that chemical dissolution produces large dismantled fragments rather than small free monomers. The formation of a solid matrix follows the “spatial filling rule”, which means that gels grow by locking swelling fragments to form a framework, then densely filling residual space. Based on chemical models, early geopolymerization of MKG can be divided into six stages from the physicochemical perspective as dismantling, locking fixation, free filling, limited filling, second dissolution, and local mending. Those findings expand the understanding of the phase evolution of the early geopolymerization process; thus, the microstructure of MKG can be better manipulated, and its engineering performances can be improved.

Geopolymer is a new type of synthesized aluminosilicate material. Compared with ordinary Portland cement, it has better fire resistance and durability, and is more environmentally friendly. In this paper, a high-strength metakaolin-based geopolymer composite (HMGC) has been developed by utilizing quartz powder and steel fibers. The optimization compositions and effect of curing temperatures (from ambient temperature to 90 °C) on the strength performance of the HMGC is studied. The optimized 1-day compressive strength of the HMGC can reach 80 MPa, and the 3-day compressive strength is close to 100 MPa (97.49 MPa). Combined with XRD, FTIR, SEM and MIP characterization, the mechanisms behind the strength development under different curing temperatures are analyzed. The results show that heat curing can significantly speed up the process of geopolymerization and increase the early strength of the HMGC. However, long-term heat curing under high temperature (such as 90 °C, 7 days) would reduce the mechanical strength of the HMGC. Prolonged high-temperature curing increases the pores and micro-defects in the gel phase of the HMGC, which may be attributed to chemical shrinkage. Thus, the curing temperature should be carefully controlled to make a HMGC with better performance.

This paper presents an approach for the application of machine learning in the prediction and understanding of casting surface related defects. The manner by which production data from a steel and cast iron foundry can be used to create models for predicting casting surface related defect is demonstrated. The data used for the model creation were collected from a medium-sized steel and cast iron foundry in which components ranging from 1 to 100 kg in weight are produced from wear and heat resistant cast iron and steel materials. This includes all production-relevant data from the melting and casting process, as well as from the mold production, the sand preparation and component quality related data from the quality management department. The data are tethered together with each other, the information regarding the identity and number of components that resulted in scrap due to the casting surface defect metal penetrations was added to the dataset. Six different machine learning algorithms were trained and an interpretation of the models outputs was accomplished with the application of the SHAP framework.

Following traumatic insult and associated pathogen infection, innate immunity is activated during the perioperative period, especially the NLRP3 inflammasome in macrophages. The neuroendocrine response is also rapidly activated to regulate excessive inflammation; however, the molecular mechanisms are still not completely clear. This study is aimed at investigating the modulation of NLRP3 inflammasome priming by endogenous glucocorticoids (corticosterone, CORT) and its relationship with xanthine oxidase (XO). RAW264.7 murine macrophages were stimulated with LPS (1 μg/ml). LPS-induced NLRP3 expression was pretreated by CORT at different concentrations (0-900 ng/ml). Then, the effect of higher concentrations of CORT (700 ng/ml) on LPS-induced NLRP3 expression and the effect of allopurinol (250 μg/ml) were observed. Finally, the effects of a CORT antagonist (RU486) on XO expression and activity and NLRP3 expression in macrophages were further analyzed. Supernatant levels IL-1β and IL-18 were measured. The results showed that LPS-induced NLRP3 expression was upregulated further by pretreatment with CORT (300 ng/ml) (P

The title compound, C44H30N4O2, was prepared from 6,6′-dibromo-2,2′-diethoxy-1,1′-binaphthalene through a coupling reaction with 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzaldehyde followed by a Knoevenagel reaction with malononitrile. The dihedral angle between the symmetry-related naphthalene ring systems is 68.82 (8)° while the dihedral angle between the the naphthalene ring system and the adjacent benzene ring is 16.92 (7)°. Four symmetry-independent molecules which are linked by intermolecular C—H...π interaction generate the packing motif in the crystal structure. One of the CN groups is disordered over two sets of sites in a 0.60 (2):0.40 (2) ratio.

Access to adequate and secure sanitation to prevent and reduce disease occurrence and improve people's health has been a longstanding global concern. Toilet standardization is immensely important for the promotion of sanitation in China. At present, China has more than 200 toilet-related standards, including national, industrial, provincial, association, and enterprise standards. In addition, there are many existing problems with the standard system, such as standards lagging, standards deficiency, and cross-repetition of standards content. This study analyzed the toilet standards utilizing a six-dimensional structure of the standardized system engineering methodology. A framework for the toilet standard system, which consists of six components, is proposed: basic general standard, public toilet standard, household toilet standard, toilet hardware standard, environmental health and safety standard, and toilet accessory standard and standard toilet peripherals. Additionally, the study suggests approaches for improving standardization including cultivating and developing association and enterprise standards, establishing a standardization technical committee, strengthening standard publicizing and implementation, and linkages with international standards. HIGHLIGHTS A six-level framework of the toilet standard system in China is presented and elaborated.; Problems and potential barriers for toilet standardization in China are analyzed.; We suggest establishing a technical standardization committee, standardization organization coordination mechanism, etc. to promote toilet standardization.; This study provides insights that will guide the formation of effective policies and strategies to enhance sanitation in China.;

Abstract A large amount of greenhouse gases, such as carbon dioxide and methane, are released during the production process of bioethanol and biogas. Converting CO2 into methane is a promising way of capturing CO2 and generating high-value gas. At present, CO2 methanation technology is still in the early stage. It requires high temperature (300–400 ℃) and pressure (> 1 MPa), leading to high cost and energy consumption. In this study, a new catalyst, Ni–Fe/Al–Ti, was developed. Compared with the activity of the common Ni/Al2O3 catalyst, that of the new catalyst was increased by 1/3, and its activation temperature was reduced by 100℃. The selectivity of methane was increased to 99%. In the experiment using simulated fermentation gas, the catalyst showed good catalytic activity and durability at a low temperature and atmospheric pressure. Based on the characterization of catalysts and the study of reaction mechanisms, this article innovatively proposed a Ni–Fe/Al–Ti quaternary catalytic system. Catalytic process was realized through the synergism of Al–Ti composite support and Ni–Fe promotion. The oxygen vacancies on the surface of the composite carrier and the higher activity metals and alloys promoted by Fe accelerate the capture and reduction of CO2. Compared with the existing catalysts, the new Ni–Fe/Al–Ti catalyst can significantly improve the methanation efficiency and has great practical application potential.