Search

Cellulose acetate hollow fiber membranes for reverse osmosis (RO) were spun using a forced convection technique. In this study, a systematic experimental design based on Taguchi’s method (which is a fractional factorial method) has been employed for discussing the relationship between the rejection rate coefficient, permeation rate and the dry–wet spinning conditions for making cellulose acetate hollow fibers for RO. The factors considered in the experimental design included the polymer contents (PCs), the ratio of the solvent (acetone) to swelling agents (formamide) in the dope solution, the dope extrusion rate (DER), the type of bore fluid (BF), the residence time (RT) and the nitrogen gas flushing rate (GR). The results indicate that the BF and the DER are the two most important factors in determining the performance of the RO membranes. [Copyright &y& Elsevier]

The effect of shear rate on the separation performance of reverse osmosis hollow fiber membrane is discussed. Experiments involving six different dope extrusion rates (DERs) (ranging 2.5–5 ml/min) are performed with the other process factors set at the optimum conditions determined by the Taguchi analysis. This will enable an assessment to be made on the relationship between the DER and the rejection rate. The regression method is used to analyse the experimental results and an empirical model has been developed. Simultaneously, it is found that there is a fairly strong correlation between extrusion shear rate and the rejection rate of the membranes, whereby as the shear rate increases, the rejection rate increases until a critical level of shear is achieved, beyond which reverse osmosis membrane performance deteriorates, suggesting that there exists an optimum shear rate which yields optimal membrane morphology for reverse osmosis hollow fiber membranes. [Copyright &y& Elsevier]