Search

This work proposes a system to successfully track, identify and tag target objects or individuals in a real time environment. Consider a sequence of cameras installed in an environment or a facility. Through these cameras user can track those intruders who are aware of how the surveillance system operates and are actively trying to avoid getting seen by the surveillance system. This system tracks the movement of any person’s movement and record and maintain that data throughout any facility in which such a solution is deployed. Movement logging of any individual person can also be done if it does not infringe his/her privacy. Design and analysis a distributed algorithm for the optimization of the recognition and mapping of the given subject/subjects on a User Interface. Finally, the performance and robustness of the distributed system is further analyzed through continuously training the algorithm or maybe real time demo.

The introduction of phosphorous (P), and oxygen (O) heteroatoms in the natural honeydew chemical structure is one of the most effective, and practical approaches to synthesizing activated carbon for possible high-performance energy storage applications. The performance metrics of supercapacitors depend on surface functional groups and high-surface-area electrodes that can play a dominant role in areas that require high-power applications. Here, we report a phosphorous and oxygen co-doped honeydew peel-derived activated carbon (HDP-AC) electrode with low surface area for supercapacitor via H 3 PO 4 activation. This activator forms phosphorylation with cellulose fibers in the HDP. The formation of heteroatoms stabilizes the cellulose structure by preventing the formation of levoglucosan (C 6 H 10 O 5 ), a cellulose combustion product, which would otherwise offer a pathway for a substantial degradation of cellulose into volatile products. Therefore, heteroatom doping has proved effective, in improving the electrochemical properties of AC-based electrodes for supercapacitors. The specific capacitance of HDP-AC exhibits greatly improved performance with increasing carbon-to-H 3 PO 4 ratio, especially in energy density and power density. The improved performance is attributed to the high phosphorous doping with a hierarchical porous structure, which enables the transportation of ions at higher current rates. The high specific capacitance of 486, and 478 F/g at 0.6, and 1.3 A/g in 1 M H 2 SO 4 electrolyte with a prominent retention of 98.5 % is observed for 2 M H 3 PO 4 having an impregnation ratio of 1 : 4. The higher yield of HDP-AC could only be obtained at an activation temperature of 500 °C with an optimized amount of H 3 PO 4 ratio. The findings suggest that the concentration of heteroatoms as surface functional groups in the synthesized HDP-AC depends on the chosen biomass precursor and the processing conditions. This work opens new avenues for utilizing biomass-derived materials in energy storage, emphasizing the importance of sustainable practices in addressing environmental challenges and advancing toward a greener future., (© 2024 The Author(s). Chemistry - An Asian Journal published by Wiley-VCH GmbH.)

Energy storage in electrochemical hybrid capacitors involves fast faradaic reactions such as an intercalation, or redox process occurring at a solid electrode surface at an appropriate potential. Hybrid sodium-ion electrochemical capacitors bring the advantages of both the high specific power of capacitors and the high specific energy of batteries, where activated carbon serves as a critical electrode material. The charge storage in activated carbon arises from an adsorption process rather than a redox reaction and is an electrical double-layer capacitor. Advanced carbon materials with interconnecting porous structures possessing high surface area and high conductivity are the prerequisites 1128to qualify for efficient energy storage. Herein, we have demonstrated that a porous honeycomb structure activated carbon derived from Australian hemp hurd (Cannabis sativa L.) in aqueous Na 2 SO 4 electrolyte showed a specific capacitance of 240 F/g at 1 A/g. The mass ratio of biochar to KOH during the chemical activation associated with the synthesis temperature influences the change in morphologies, and distribution of pore sizes on the adsorption of ions. At higher synthesis temperatures, the tubular form of the honeycomb starts to disintegrate. The hybrid sodium-ion device employing hemp-derived activated carbon (HAC) coupled with electrolytic manganese dioxide (EMD) in an aqueous Na 2 SO 4 electrolyte showed a specific capacitance of 95 F/g at 1 A/g having a capacitance retention of 90 %. The hybrid device (HAC||EMD) can possess excellent electrochemical performance metrics, having a high energy density of 38 Wh/kg at a power density of 761 W/kg. Overall, this study provides insights into the influence of the activation temperature and the KOH impregnation ratio on morphology, porosity distribution, and the activated carbon's electrochemical properties with faster kinetics. The high cell voltage for the device is devoted to the EMD electrode., (© 2024 The Author(s). ChemPlusChem published by Wiley-VCH GmbH.)

Transition-metal dichalcogenides (TMDs) have attracted increasing attention in fundamental studies and technological applications owing to their atomically thin thickness, expanded interlayer distance, motif band gap, and phase-transition ability. Even though TMDs have a wide variety of material assets from semiconductor to semimetallic to metallic, the materials with fixed features may not show excellence for precise application. As a result of exclusive crystalline polymorphs, physical and chemical assets of TMDs can be efficiently modified via various approaches of interface nanoarchitectonics, including heteroatom doping, heterostructure, phase engineering, reducing size, alloying, and hybridization. With modified properties, TMDs become interesting materials in diverse fields, including catalysis, energy, electronics, transistors, and optoelectronics.

Improving the energy share of renewable energy technologies is the only solution to reduce greenhouse gas emissions and air pollution. The high-performing green battery energy storage technologies are critical for storing energy to address the intermittent nature of renewable energy resources. In recent years, aqueous batteries, particularly Zn-ion batteries (ZIBs), have achieved and shown great potential for stationary energy storage systems owing to their low cost and safer operation. However, the practical applications of the ZIBs have significantly been impeded due to the gap between the breakthroughs achieved in academic research and industrial developments. The present review discusses the ZIB's advantages, possibilities, and shortcomings for stationary energy storage systems. The Review begins with a brief introduction to the ZIBs and their charge storage mechanisms based on the structural properties of cathode materials. The scientific and technical challenges that obstruct the commercialization of the ZIBs are discussed in detail concerning their impact on accelerating the utilization of the ZIBs for real-life applications. The final section highlights the outlook on research in this flourishing field., (© 2023 Wiley-VCH GmbH.)

Background: Hand, foot, and mouth disease (HFMD) is an enteroviral disease that occurs as outbreaks and sporadic cases in India. In this study, we investigated and characterized the aetiology of HFMD cases that occurred in Karnataka, South India from April to October 2022., Methods: Throat swabs, vesicular swabs, urine, and blood samples from suspected cases were analysed by reverse transcription polymerase chain reaction (RT-PCR) for the detection of enteroviruses. Molecular typing of the enterovirus-positive samples was carried out by amplifying the partial virion protein 1(VP1) gene sequence, followed by sequencing and phylogenetic analysis., Results: Out of the 187 samples received from 82 cases, 93 (50%) tested positive (55/82 cases, 67%) for enteroviruses, with the majority of the HFMD cases reported in paediatric population of less than 5 years (36/55, 65.4%), while 3 cases (3/55, 5.4%) were adults. Out of the 55 enterovirus-positive cases, 31 showed partial VP1 region amplification and 19 of these cases were typed as coxsackievirus A16 (CV-A16) (13/19, 68.4%) and CV-A6 (6/19, 31.6%). The CV-A16 strains identified belonged to subclade B1c while two CV-A6 strains belonged to subclade E2. On molecular testing for other viruses causing fever-rash symptoms, 4/27 (15%) enterovirus-negative cases were detected as herpes simplex virus (1 case) and varicella zoster virus (3 cases) positive., Conclusion: The main causative agent of HFMD in Karnataka in 2022 was CV-A16, followed by CV-A6. Apart from the common paediatric HFMD cases, adult cases were also reported during this period. Further studies involving laboratory and clinical investigations are essential for monitoring and managing HFMD in the community., Competing Interests: Conflicts of interest None., (Copyright © 2023 Indian Association of Medical Microbiologists. Published by Elsevier B.V. All rights reserved.)

Astroviruses (AstV) and adenoviruses (AdV) are associated with diarrhoea in young animals. However, the epidemiology and genetic diversity of AstVs and AdVs in animals is not well studied. Hence, the present study was conducted to detect and characterize AstVs and AdVs in calves, piglets and puppies from Western Maharashtra, India. Out of the processed porcine (48), canine (80), and bovine (65) faecal samples, the porcine AstV (PAstV), bovine AstV (BAstV), canine AstV (CAstV), and porcine AdV (PAdV) were detected in 12.5%, 7.69%, 3.75% and 4.1% of samples, respectively. In the RNA-dependent RNA polymerase region-based phylogenetic analysis, the detected BAstV strains grouped with MAstV-28, MAstV-33, and MAstV-35, CAstV strains belonged to MAstV-5; PAstV strains belonged to MAstV-24, MAstV-26, and MAstV-31. However, in hexon gene-based phylogeny, both the detected PAdV were of genotype 3, exhibiting 91.9-92.5% nucleotide identity with Ivoirian and Chinese strains. The study reports first-time BAstVs from calves and PAdV-3 from piglets in India. The study revealed diversity in the circulation of AstVs in tested animals and AdVs in pigs, and suggested that they alone might be associated with other diarrhoea or in combination with other enteric pathogens, thus highlighting the necessity of extensive epidemiological investigations to develop diagnostic tools and control measures.

Graphene is fundamentally a two-dimensional material with extraordinary optical, thermal, mechanical, and electrical characteristics. It has a versatile surface chemistry and large surface area. It is a carbon nanomaterial, which comprises sp 2 hybridized carbon atoms placed in a hexagonal lattice with one-atom thickness, giving it a two-dimensional structure. A large number of synthesis techniques including epitaxial growth, liquid phase exfoliation, electrochemical exfoliation, mechanical exfoliation, and chemical vapor deposition are used for the synthesis of graphene. Graphene prepared using different techniques can have a number of benefits and deficiencies depending on its application. This study provides a summary of graphene preparation techniques and critically assesses the use of graphene, its derivates, and composites in environmental applications. These applications include the use of graphene as membrane material for the detoxication and purification of water, active material for gas sensing, heavy metal ions detection, and CO 2 conversion. Furthermore, a trend analysis of both synthesis techniques and environmental applications of graphene has been performed by extracting and analyzing Scopus data from the past ten years. Finally, conclusions and outlook are provided to address the residual challenges related to the synthesis of the material and its use for environmental applications.

Background: Cervical intraepithelial neoplasia (CIN) II and CIN III have a high progression rate to invasive squamous cell carcinoma (SCC). Histopathological assessment is known to have intra and inter-observer diagnostic discrepancies even among two panels of pathologist. Subsequently, to improve on the accuracy of histopathological examination, various IHC biomarkers have been evaluated in the biopsy of cervix., Aim: The present study was undertaken to evaluate the immunoexpression and interrelationship of p16INK4A, MIB-1 and CK17 in histopathologically diagnosed cases of CIN and invasive cervical carcinoma (ICC) which could aid in differentiating CIN and ICC from benign cervical lesions., Materials and Methods: This study included 120 cases of cervical lesions; out of which 20 cases were each of negative for malignancy/dysplasia (NED), CIN I and CIN III, 10 cases of CIN II and 50 cases of ICC. A technique of manual tissue microarray was employed for the study of immunohistochemical markers such as p16INK4A, CK17 and MIB-1 in all cases. Results were subjected to statistical analysis., Results: The difference in p16 immunoexpression between NED (0/20, 0%) and CIN+ICC (97/100, 97%) cases was statistically highly significant. (p<0.01) The sensitivity, specificity, positive and negative predictive value and diagnostic accuracy of p16 immunoexpression in comparison to histopathological diagnosis was 97%, 100%, 100%, 86.96% and 97.5% respectively. The overall agreement of p16 staining with histopathological diagnosis was 97.5% (?=0.9151 i.e. very good) The difference in MIB-1 immunoexpression between CIN-I (6/20, 30%) and CIN II+III (30/30, 100%), CIN (36/50,72%) and ICC (50/50, 100%) cases was statistically highly significant. (p<0.01) The difference in MIB-1 immunoexpression between NED (0/20, 0%) and CIN+IC (86/100, 86%) cases was statistically highly significant. (p<0.01) The sensitivity, specificity, positive and negative predictive value and diagnostic accuracy of MIB-1 immunoexpression in comparison to histopathological diagnosis was 86%, 100%, 100%, 58.82% and 88.33% respectively. The overall agreement of MIB-1 staining with H&E diagnosis was 88.33%. (?=0.6719 i.e. good) The difference in CK17 immunoexpression between CIN-I (11/20, 55%) and CIN-II+III (26/30, 86.67%) cases was statistically significant. (p=0.030) The difference in CK17 immunoexpression between CIN (37/50, 74%) and ICC (46/50, 92%) cases was statistically significant. (p=0.033) The difference in CK17 immunoexpression between NED (0/20, 0%) and CIN+ICC (83/100, 83%) cases was statistically highly significant. (p<0.01) The sensitivity, specificity, positive and negative predictive value and diagnostic accuracy of CK 17 immunoexpression in comparison to histopathological diagnosis was 82%, 100%, 100%, 52.63% and 85% respectively. The overall agreement of CK 17 staining with histopathological diagnosis was 85% (?=0.6029 i.e. moderate) The agreement between p16 and MIB-1 immunostaining was 89.16%. (?= 0.7 i.e., good) The agreement between CK17 and MIB-1 immunostaining was 86.6%. (?= 0.683 i.e., good) The agreement between p16 and CK17 immunostaining was 84.16%. (?= 0.5908 i.e., moderate) Conclusion: The findings of the present study indicate that the IHC report of p16, MIB-1 and CK-17 in CIN and ICC cases if included in each histopathology report could aid in accurate diagnosis which could facilitate in better patient management.

Transition metal selenides (TMSs) have enthused snowballing research and industrial attention due to their exclusive conductivity and redox activity features, holding them as great candidates for emerging electrochemical devices. However, the real-life utility of TMSs remains challenging owing to their convoluted synthesis process. Herein, a versatile in situ approach to design nanostructured TMSs for high-energy solid-state hybrid supercapacitors (HSCs) is demonstrated. Initially, the rose-nanopetal-like NiSe@Cu 2 Se (NiCuSe) positive electrode and FeSe nanoparticles negative electrode are directly anchored on Cu foam via in situ conversion reactions. The complementary potential windows of NiCuSe and FeSe electrodes in aqueous electrolytes associated with the excellent electrical conductivity results in superior electrochemical features. The solid-state HSCs cell manages to work in a high voltage range of 0-1.6 V, delivers a high specific energy density of 87.6 Wh kg -1 at a specific power density of 914.3 W kg -1 and excellent cycle lifetime (91.3% over 10 000 cycles). The innovative insights and electrode design for high conductivity holds great pledge in inspiring material synthesis strategies. This work offers a feasible route to develop high-energy battery-type electrodes for next-generation hybrid energy storage systems., (© 2022 Wiley-VCH GmbH.)

Transition metal selenides (TMS) have excellent research prospects and significant attention in supercapacitors (SCs) owing to their high electrical conductivity, superior electrochemical activity and excellent structural stability. However, the commercial utilization of TMS remains challenge due to their elaborate synthesis. Present study designed a hierarchical cobalt selenide (CoSe 2 ) nanowire array on Ni-foam to serve as a positive electrode for asymmetric SCs (ASCs). The nanowires-like morphology of CoSe 2 was highly advantageous for SCs, as it offered enhanced electrical conductivity, plenty of surface sites, and short ion diffusion. The as-obtained, CoSe 2 nanowire electrode demonstrated outstanding electrochemical features, with an areal capacity of 1.08 mAh cm -2 at 3 mA cm -2 , high-rate performance (69.5 % at 50 mA cm -2 ), as well as outstanding stability after 10,000 cycles. The iron titanium nitride@nitrogen-doped graphene (Fe-TiN@NG) was prepared as a negative electrode to construct the ASCs cell. The obtained ASCs cell illustrated an energy density of 91.8 W h kg -1 at a power density of 281.4 W kg -1 and capacity retention of 94.6% over 10,000 cycles. The overall results provide a more efficient strategy to develop redox-ambitious active materials with a high capacity for advanced energy-storage systems., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2021 Elsevier Inc. All rights reserved.)

Two-dimensional (2D) transition metal dichalcogenides have attracted vibrant interest for future solid-state device applications due to their unique properties. However, it is challenging to realize 2D material based high performance complementary devices due to the stubborn Fermi level pinning effect and the lack of facile doping techniques. In this paper, we reported a hybrid Gr/Ni contact to WS2, which can switch carrier types from n-type to p-type in WS2. The unorthodox polarity transition is attributed to the natural p-doping of graphene with Ni adsorption and the alleviation of Fermi level pinning in WS2. Furthermore, we realized asymmetric Ni and Gr/Ni hybrid contacts to a multilayer WS2 device, and we observed synergistic p-n diode characteristics with excellent current rectification exceeding 104, and a near unity ideality factor of 1.1 (1.6) at a temperature of 4.5 K (300 K). Lastly, our WS2 p-n device exhibits high performance photovoltaic ability with a maximum photoresponsivity of 4 × 104 A W-1 at 532 nm wavelength, that is 108 times higher than that of graphene and 50 times better than that of the monolayer MoS2 photodetector. This doping-free carrier type modulation technique will pave the way to realize high performance complementary electronics and optoelectronic devices based on 2D materials.

A two-dimensional (2D) layered material-based p-n diode is an essential element in the modern semiconductor industry for facilitating the miniaturization and structural flexibility of devices with high efficiency for future optoelectronic and electronic applications. Planar devices constructed previously required a complicated device structure using a photoresist, as they needed to consider non-abrupt interfaces. Here, we demonstrated a WSe 2 based lateral homojunction diode obtained by applying a photo-induced effect in BN/WSe 2 heterostructures upon illumination via visible and deep UV light, which represents a stable and flexible charge doping technique. We have discovered that with this technique, a field-effect transistor (FET) based on p-type WSe 2 is inverted to n-WSe 2 so that a high electron mobility is maintained in the h-BN/n-WSe 2 heterostructures. To confirm this hypothesis, we deduced the work function values of p-WSe 2 and n-WSe 2 FETs by conducting Kelvin probe force microscopy (KPFM) measurements, which revealed the decline of the Fermi level from 5.07 (p-WSe 2 ) to 4.21 eV (n-WSe 2 ). The contact potential difference (CPD) between doped and undoped junctions was found to be 165 meV. We employed ohmic metal contacts for the planar homojunction diode by utilizing an ionic liquid gate to achieve a diode rectification ratio up to ∼10 5 with n = 1. An exceptional photovoltaic performance is also observed. The presence of a built-in potential in our devices leads to an open-circuit voltage (V oc ) and short-circuit current (I sc ) without an external electric field. This effective doping technique is promising to advance the concept of preparing future functional devices.

Electrode materials exhibiting nanostructural design, high surface area, tunable pore size, and efficient ion diffusion/transportation are essential for achieving improved electrochemical performance. In this study, we successfully prepared cobalt phosphide and cobalt nanoparticles embedded into nitrogen-doped nanoporous carbon (CoP-CoNC/CC) using a simple precipitation method followed by pyrolysis-phosphatization. Subsequently, we employed CoP-CoNC/CC as the electrode for supercapacitor applications. Notably, the resultant CoP-CoNC/CC displayed a high surface area with tunable porosity. Based on the benefits of the CoP in CoNC/CC, improved electrochemical performance was achieved with a specific capacitance of 975 F g -1 at 1 mA cm -2 in a 2 M KOH electrolyte. The assembled hybrid supercapacitor using CoP-CoNC/CC (positive electrode) and activated carbon (AC) (negative electrode) exhibited a specific capacitance of 144 F g -1 , a specific energy of 39.2 W h kg -1 at 1960 W kg -1 specific power, with better cyclic stability. The higher performance can be attributed to the synergetic effect between CoP, Co metal, and the nitrogen-doped nanoporous carbon in three-dimensional carbon cloth (CC). These excellent properties make CoP-CoNC/CC a promising electrode for developing future energy-storage devices.

Current progress in the advancement of energy-storage devices is the most important factor that will allow the scientific community to develop resources to meet the global energy demands of the 21st century. Nanostructured materials can be used as effective electrodes for energy-storage devices because they offer various promising features, including high surface-to-volume ratios, exceptional charge-transport features, and good physicochemical properties. Until now, the successful research frontrunners have focused on the preparation of positive electrode materials for energy-storage applications; nevertheless, the electrochemical performance of negative electrodes is less frequently reported. This review mainly focuses on the current progress in the development of tungsten oxide-based electrodes for energy-storage applications, primarily supercapacitors (SCs) and batteries. Tungsten is found in various stoichiometric and nonstoichiometric oxides. Among the different tungsten oxide materials, tungsten trioxide (WO 3 ) has been intensively investigated as an electrode material for different applications because of its excellent charge-transport features, unique physicochemical properties, and good resistance to corrosion. Various WO 3 composites, such as WO 3 /carbon, WO 3 /polymers, WO 3 /metal oxides, and tungsten-based binary metal oxides, have been used for application in SCs and batteries. However, pristine WO 3 suffers from a relatively low specific surface area and low energy density. Therefore, it is crucial to thoroughly summarize recent progress in utilizing WO 3 -based materials from various perspectives to enhance their performance. Herein, the potential- and pH-dependent behavior of tungsten in aqueous media is discussed. Recent progress in the advancement of nanostructured WO 3 and tungsten oxide-based composites, along with related charge-storage mechanisms and their electrochemical performances in SCs and batteries, is systematically summarized. Finally, remarks are made on future research challenges and the prospect of using tungsten oxide-based materials to further upgrade energy-storage devices., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A simplistic and economical chemical way has been used to prepare highly efficient nanostructured, manganese oxide (α-MnO 2 ) and hexagonal copper sulfide (h-CuS) electrodes directly on cheap and flexible stainless steel sheets. Flexible solid-state α-MnO 2 /flexible stainless steel (FSS)/polyvinyl alcohol (PVA)-LiClO 4 /h-CuS/FSS asymmetric supercapacitor (ASC) devices have been fabricated using PVA-LiClO 4 gel electrolyte. Highly active surface areas of α-MnO 2 (75 m 2 g -1 ) and h-CuS (83 m 2 g -1 ) electrodes contribute to more electrochemical reactions at the electrode and electrolyte interface. The ASC device has a prolonged working potential of +1.8 V and accomplishes a capacitance of 109.12 F g -1 at 5 mV s -1 , energy density of 18.9 Wh kg -1 , and long-term electrochemical cycling with a capacity retention of 93.3% after 5000 cycles. Additionally, ASC devices were successful in glowing seven white-light-emitting diodes for more than 7 min after 30 s of charging. Outstandingly, real practical demonstration suggests "ready-to-sell" products for industries.

The mesoporous nanostructured metal oxides have a lot of capabilities to upsurge the energy storing capacity of the supercapacitor. In present work, different nanostructured morphologies of MnO 2 have been successfully fabricated on flexible carbon cloth by simple but capable hydrothermal method at different deposition temperatures. The deposition temperature has strong influence on reaction kinetics, which subsequently alters the morphology and electrochemical performance. Among different nanostructured MnO 2 thin films, the mesoporous weirds composed thin film obtained at temperature of 453K exhibits excellent physical and electrochemical features for supercapacitor application. The weirds composed MnO 2 thin film exhibits specific surface area of 109m 2 g -1 , high specific capacitance of 595Fg -1 with areal capacitance of 4.16Fcm -2 at a scan rate of 5mVs -1 and high specific energy of 56.32Whkg -1 . In addition to this, MnO 2 weirds attain capacity retention of 87 % over 2000 CV cycles, representing better cycling stability. The enhanced electrochemical performance could be ascribed to direct growth of highly porous MnO 2 weirds on carbon cloth which provide more pathways for easy diffusion of electrolyte into the interior of electroactive material. The as-fabricated electrode with improved performance could be ascribed as a potential electrode material for energy storage devices., (Copyright © 2017 Elsevier Inc. All rights reserved.)

To achieve the highest electrochemical performance for supercapacitor, it is very essential to find out a suitable pair of an active electrode material and an electrolyte. In the present work, a simple approach is employed to enhance the supercapacitor performance of WO3 thin film. The WO3 thin film is prepared by a simple and cost effective chemical bath deposition method and its electrochemical performance is tested in conventional (H2SO4) and redox additive [H2SO4+hydroquinone (HQ)] electrolytes. Two-fold increment in electrochemical performance for WO3 thin film is observed in redox additive aqueous electrolyte compared to conventional electrolyte. WO3 thin film showed maximum specific capacitance of 725Fg(-1), energy density of 25.18Whkg(-1) at current density of 7mAcm(-2) with better cycling stability in redox electrolyte. This strategy provides the versatile way for designing the high performance energy storage devices., (Copyright © 2016 Elsevier Inc. All rights reserved.)