Search

Purpose: To study the correlation between diurnal fluctuations of intraocular pressure and progression of chronic simple glaucoma. Introduction: Out of all the risk factors for glaucoma, only modifiable risk factor is intraocular pressure. A lot of studies have been done to determine the relationship between the behavior of diurnal intraocular pressure (IOP) and progression of glaucoma. The results varied and are inconclusive because the visual field damage could have occurred at a time when the IOP was high, although it was low at the time of measurement. Materials and Methods: A prospective study was conducted on all patients diagnosed or suspected CSG with office IOP

Efficient wastewater treatment, particularly the removal of heavy metal ions, remains a challenging priority in environmental remediation. This study introduces a novel sandwich-structured nanocomposite, RGO-CuS-PPy, composed of reduced graphene oxide (RGO), copper sulfide (CuS), and polypyrrole (PPy), synthesized via a straightforward hydrothermal method. The unique combination of RGO, CuS, and PPy offers enhanced adsorption capacity for Ni(II) ions due to RGO's high surface area and CuS's active binding sites, supported by PPy's structural stability contributions. This study is among the first to explore this specific nanocomposite architecture for Ni(II) removal, achieving an adsorption capacity of 166.67 mg/g and a high removal efficiency of 94.9% within 210 min for 55 mg/L of Ni(II) concentration at pH 6 and adsorbent dose of 3 mg/15 mL. The kinetic analysis shows the best fitted time-dependent experimental data with the pseudo-second-order model, indicating chemisorption. Isotherm studies confirmed the Langmuir model as the best fit, yielding a high monolayer adsorption capacity of 166.67 mg/g. Thermodynamic analysis shows the adsorption process was endothermic (ΔH° = 80.23 kJ/mol) and spontaneous (ΔG° ranging from −6.985 to −14.399 kJ/mol). Additionally, reusability tests using 0.1 M HCl for desorption demonstrated good reusability, emphasizing the RGO-CuS-PPy nanocomposite's potential as a sustainable adsorbent for Ni(II) removal in wastewater treatment applications. [ABSTRACT FROM AUTHOR]

Efficiently treating wastewater, particularly the elimination of heavy metal ions from water systems, continues to be one of the most pressing and complex challenges in modern environmental management. In this work, reduced graphene oxide coupled silver molybdate binary nanocomposites (RGO-Ag2MoO4 NCs) have been prepared via hydrothermal method. The crystalline nature and surface properties of the developed RGO-Ag2MoO4 NCs were proved by XRD, FTIR, SEM, and EDS techniques. Adsorption experiments demonstrated that the nanocomposites (NCs) effectively removed Pb(II) ions within 120 min, achieving a maximum removal efficiency ranging from 94.96% to 86.37% for Pb(II) concentrations between 20 and 100 mg/L at pH 6. Kinetic studies showed that the adsorption process followed a pseudo-second order model. Isotherm analysis presented that the Langmuir model provided the greatest fit for the equilibrium data, with a monolayer adsorption capacity of 128.94 mg/g. Thermodynamic analysis revealed that the adsorption process was spontaneous and endothermic. The results of this study highlight RGO-Ag2MoO4 NCs as a highly promising and eco-friendly material for the effective elimination of Pb(II) ions from wastewater. Their strong adsorption capacity, coupled with sustainable properties, makes them an efficient solution for addressing lead contamination, offering significant potential for practical applications in water treatment systems. [ABSTRACT FROM AUTHOR]

Effective wastewater treatment remains a critical challenge, especially when dealing with hazardous pollutants like antimony (Sb(III)). This study addresses this issue by using innovative nanocomposites to remove Sb(III) ions from water, while simultaneously repurposing the spent adsorbents for energy storage applications. We developed reduced graphene oxide-NiFe2O3-SiO2-polyindole nanocomposites (RGO-NiFe2O3-SiO2-PIn NCs) via a hydrothermal synthesis method, achieving a high removal efficiency of 91.84% for Sb(III) ions at an initial concentration of 50 mg/L at pH 8. After adsorption, the exhausted adsorbent was repurposed for energy storage, effectively minimizing secondary pollution. The Sb(III)-loaded adsorbent (RGO-NiFe2O3-SiO2-PIn@SbOx) exhibited excellent performance as an energy storage material, with a specific capacitance (Cs) of 701.36 F/g at a current density of 2 A/g and a retention rate of 80.15% after 10,000 cycles. This dual-purpose approach not only advances wastewater treatment technologies but also contributes to sustainable and economical recycling practices, particularly in the field of energy storage. [ABSTRACT FROM AUTHOR]