Search

With the rapid development of display technology, related diseases of the human eye are also increasing day by day. Eye floaters are one of the diseases that affect humans. Herein, we present a functional ophthalmic dressing that can permeate the skin tissues of the eyes through oxygen and hydrogen to improve the symptoms of floaters. In clinical tests, the symptoms of sensory floaters improved in 28 patients, and the recovery rates of mild, moderate, and severe floaters were about 70%, 66.7%, and 83.3%, respectively.

Purposes: This study discussed the accommodative response and pupil size of myopic adults using a double-mirror system (DMS). The viewing distance could be extended to 2.285 m by using a DMS, which resulted in a reduction and increase in the accommodative response and pupil size, respectively. By using a DMS, the reduction of the accommodative response could improve eye fatigue with near work. Method: Sixty subjects aged between 18 and 22 years old were recruited in this study, and the average age was 20.67 ± 1.09. There were two main steps in the experimental process. In the first step, we examined the subjects’ refraction state and visual function, and then fitted disposable contact lenses with a corresponding refractive error. In the second step, the subjects gazed at an object from a viewing distance of 0.4 m and at a virtual image through a DMS, respectively, and the accommodative response and pupil size were measured using an open field autorefractor. Results: When the subjects gazed at the object from a distance of 0.4 m, or gazed at the virtual image through a DMS, the mean value of the accommodative response was 1.74 ± 0.43 or 0.16 ± 0.47 D, and the pupil size was 3.98 ± 0.06 mm or 4.18 ± 0.58 mm, respectively. With an increase in the viewing distance from 0.4 m to 2.285 m, the accommodative response and pupil size were significantly reduced about 1.58 D and enlarged about 0.2 mm, respectively. For three asterisk targets of different sizes (1 cm × 1 cm, 2 cm × 2 cm, and 3 cm × 3 cm), the mean accommodative response and pupil size through the DMS was 0.19 ± 0.16, 0.27 ± 0.24, 0.26 ± 0.19 D; and 4.20 ± 1.02, 3.94 ± 0.73, 4.21 ± 0.57 mm, respectively. The changes of the accommodative response and pupil size were not significant with the size of the targets (p > 0.05). In the low or high myopia group, the accommodative response of 0.4 m and 2.285 m was 1.68 ± 0.42 D and 0.21 ± 0.48 D; and 1.88 ± 0.25 D and 0.05 ± 0.40 D, respectively. The accommodative response was significantly reduced by 1.47 D and 1.83 D for these two groups. The accommodative microfluctuations (AMFs) were stable when a DMS was used; on the contrary, the AMFs were unstable at a viewing distance of 0.4 m. Conclusions: In this study, the imaging through a DMS extended the viewing distance and enlarged the image, and resulted in a reduction in the accommodative response and an increase in the pupil size. For the low myopia group and the high myopia group, the accommodative response and pupil size were statistically significantly different before and after the use of the DMS. The reduction of the accommodative response could be applied for the improvement of asthenopia.

Self-organized periodic micro/nanostructures caused by stimulus-responsive structural deformation often occur in anisotropic self-assembled supramolecular systems (e.g., liquid crystal systems). However, the long-range orderliness of these structures is often beyond control. In this article, we first demonstrate that a large-area disordered two-dimensional (2D) microgrid chiral structure appears in the cholesteric liquid crystal (CLC) reactive mixture because of the photopolymerization-induced Helfrich deformation effect under exposure to the single UV-laser beam. The result is attributed to the impact of an internal longitudinal strain, which is caused by the pitch contraction of the CLC-monomer region through the continuing compression of the thickening CLC polymer layer adhered on the illuminated substrate of the sample during photopolymerization. The experimental results further show that a one-dimensional (1D) UV-laser interference field can be used to effectively control the postformed 2D microgrid structure to arrange in an orderly manner throughout the large exposed area (an order of centimeter). The optimum ability for controlling the orderliness of the microgrid structure can be achieved if the spacing width of the interference field approximates the periodicity of the postformed 2D microgrids. Several factors, such as the pitch of the CLC mixture and the included angle and intensity of the two interfering laser beams, which influence the orderliness and properties of the 2D microgrid structure, are explored in this study. The result of this research opens a new page to improve the applicability of the Helfrich deformation phenomenon and further provides a reference platform for manipulating, modifying, and even tailoring periodic micro/nanostructures in self-organized supramolecular soft-matter systems for application in advanced optics/photonics.

Purpose: This study first proposed the application of a double-mirror system (DMS) to extend viewing distance and investigate the accommodative response of schoolchildren under a DMS. Method: Fifty-seven subjects aged between 7 and 12 years old were recruited in this study, and the experiment was divided into two stages. The first stage consisted of a case history inquiry, a refraction state, and a visual function examination. In the second stage, the subjects gazed at an object at distances of 0.4 m, 2.285 m, and through a DMS, respectively, and their accommodative responses were measured using an open-field autorefractor. Results: There was no significant difference in the schoolchildren’s accommodative response between subjects gazing at an object at 2.285 m (0.14 ± 0.35 D, p &gt, 0.05) and those gazing at it through a DMS (0.20 ± 0.35 D). However, their accommodative response showed a significant difference between subjects gazing at an object at 0.4 m and 2.285 m and those gazing at it at 0.4 m and through a DMS. Conclusion: In this experiment, the results of the children’s accommodative response measured at 2.285 m or through a DMS are very similar. The viewing distance can be extended by a DMS, resulting in accommodative relaxation. This result may have potential applications in myopia control.

This paper investigates the photoinduced change of refractive index in dye (methyl red, MR)-doped blue phase (DDBP) cells by illumination of a pump beam. Through excitation of light irradiation with proper photon energy, MR can transform from trans-state to cis-state and successively diffuse and anisotropically adsorb on the inner glass substrate of the DDBP cell along the direction perpendicular to the polarisation of the pump beam. The adsorbed MR molecules can effectively rotate the orientation of the liquid crystal (LC) molecules and thereby modulate the effective refractive index of the DDBP cell. The SEM images of the adsorbed regions of the illuminated DDBP samples were also taken for discussing the relation between the pump intensity and the photoinduced birefringence.

This paper discusses the accommodative relaxation of myopic adults by using a simple double-mirror design. This optical design can extend the viewing distance to 2.285 m and magnify the image up to 3.79 times, and it results in the accommodative relaxation of a single human eye. We recruited 32 subjects with an average age of 20.8 ± 0.95 years old. After an examination of their refractive status, the disposable contact lenses with a corresponding refractive error were corrected, and the dynamic accommodative response and the change in pupil size were measured by using an open-field auto-refractor. The dynamic accommodative responses and pupil size data were collected under two viewing distance conditions. When the subjects gazed at a real object that was 0.4 m away, or a virtual image that was 2.285 m away, the mean value of the accommodative response was 1.69 ± 0.31D or 0.11 ± 0.05D, and the pupil size was 3.79 ± 0.49 mm or 4.09 ± 0.72 mm, respectively. The accommodative response decreased and the pupil size increased by using the double-mirror system, and therefore, accommodative relaxation can be achieved by using this new optical design. In this study, we first successfully proposed a simple optical design to relax the accommodation, and the fluctuations of the accommodation response were stable, with the extended viewing distance of 2.285 m. This design may be applied for the improvement of visual function, such as the reduction of asthenopia and the control of myopia.

In this paper, we propose a modified gravity method by introducing centrifugal force to promote the stacking of silica particles and the order of formed colloidal crystals. In this method, a monodispersed silica colloidal solution is filled into empty cells and placed onto rotation arms that are designed to apply an external centrifugal force to the filled silica solution. When sample fabrication is in progress, silica particles are forced toward the edges of the cells. The number of defects in the colloidal crystal decreases and the structural order increases during this process. The highest reflectivity and structural order of a sample was obtained when the external centrifugal force was 18 G. Compared to the samples prepared using the conventional stacking method, samples fabricated with centrifugal force possess higher reflectivity and structural order. The reflectivity increases from 68% to 90%, with an increase in centrifugal force from 0 to 18 G.

This research applies the non-linear effect of azo dye-doped liquid crystal materials to develop a small, simple, and adjustable beam-splitting component with grating-like electrodes. Due to the dielectric anisotropy and optical birefringence of nematic liquid crystals, the director of the liquid crystal molecules can be reoriented by applying external electric fields, causing a periodic distribution of refractive indices and resulting in a diffraction phenomenon when a linearly polarized light is introduced. The study also discusses the difference in the refractive index (&Delta, n), the concentration of azo dye, and the rising constant depending on the diffraction signals. The experimental results show that first-order diffraction efficiency can reach ~18% with 0.5 wt % azo dye (DR-1) doped in the nematic liquid crystals.

Dye-doped nematic liquid crystal refilled gradient-pitched enantiomorphic cholesteric liquid crystal polymer templates are demonstrated. The enantiomorphic device has high reflectivity and wide spectral tunability throughout the entire visible region. This device can also provide low threshold lasing emission with both right- and left-circular polarizations from the blue to the red region.

This study aims to determine whether IntraLase surgery can cause rainbow glare. Monte-Carlo ray tracing method is used to study visual conditions of an ordered microstructure array on the cornea. A corneal flap in the simulated eye model can generate numerous microbubbles caused by IntraLase surgery. Moreover, this study evaluates the visual performance under different conditions such as the size and interval of the microbubble structure on the cornea with vary incident angles and diameters of light. The results of this study can help elucidate the real cause of rainbow glare as a side effect of IntraLase.

This work demonstrates an electrically-tunable nematic liquid crystal (NLC) diffraction grating with a periodic electrode structure, and discusses the polarization properties of its diffraction. The efficiency of the first-order diffraction can be gradually controlled by applying external electric fields cross the NLC, and the maximum diffraction efficiency of the first-order diffraction that can be obtained is around 12.5% under the applied voltage of 5.0 V. In addition to the applied electric field, the efficiency of the first-order diffraction can also vary by changing the polarized state of the incident beam. Antisymmetric polarization states with symmetrical intensities in the diffractions corresponding to the +1 and &minus, 1 order diffraction signals are also demonstrated.

This study proposes a method for staging periodontal disease through hyperspectral imaging technique. The study is composed of two parts. The first part shows the spectrum of gingival images that is simulated by hyperspectral imaging systematic analysis. The second part uses the principal component score chart for staging periodontal disease based on the obtained mean simulation spectrum. The experimental results show the staging results of periodontal disease through principal component score chart, allowing us to clearly identify the spectral features of normal gingiva and mild, moderate, and severe periodontitis. Our method can identify the stage of periodontal disease accurately and has a sensitivity and specificity of approximately 0.83 and 0.938, respectively.

This paper proposes an effective approach to fabricate a blue phase liquid crystal (BPLC) microlens array based on a photoconductive film. Owing to the characteristics of photo-induced conducting polymer polyvinylcarbazole (PVK), in which conductivity depends on the irradiation of UV light, a progressive mask resulting in the variation of conductivity is adopted to produce the gradient distribution of the electric field. The reorientations of liquid crystals according to the gradient distribution of the electric field induce the variation of the refractive index. Thus, the incident light experiences the gradient distribution of the refractive index and results in the focusing phenomenon. The study investigates the dependence of lens performance on UV exposure time, the focal length of the lens, and focusing intensities with various incident polarizations. The BPLC microlens array exhibits advantages such as electrically tunability, polarization independence, and fast response time.

In this paper, we demonstrate the potential of liquid crystals (LCs) on the applications of small, simple, and tunable optical guided channels. Experimental results show that three operation modes of beam coupling can be achieved, depending on the feature of the electrically controllable refractive index, the incident position, and the specific design of electrodes. The dependence of the beam polarization on self-focusing and coupling effect are also discussed. The electrically controllable self-focusing and beam coupling are highly potential on integrated photonic circuits.

This study proposes a practical method for modeling floating images in a human eye with vitreous floaters by using optical software and image processing. A floating image is an overlapping image of vitreous floaters inside the eye and an object outside. Firstly, the diffraction pattern from a small floater ball was studied. To model the images caused by floater groups, such as threadlike strands and cataract-induced floaters, a nonsequential software and Mie scattering theory were applied. On the basis of our simulation, an artificial reduced eye having floater-like micro-structures is utilized to show different floating images. The main benefit of this modeling method is the ability to assist quantitatively identifying the vision deficiency induced by floaters.

In this paper, 32M 0.242 um2 SRAM cell array leakage was reduced significantly by ~ one order of magnitude without affecting the N+/PW junction capacitance after introducing a channel stop implant (CSI) in P-type well. The space for N+ in PW to NW is generally much smaller for SRAM than for logic device, therefore SRAM is normally the weakest point for N+ in PW to NW well isolation. After checking the N+ in PW to NW leakage, we found that its leakage is the dominant factor for the high SRAM standby current. Furthermore, NMOS performance was also improved with this channel stop implant. The N+/PW diode, N+/PW/DNW and P+/NW/PW bipolar were confirmed to be comparable with the baseline without the channel stop implant. P-type well proximity effect (WPE) and NMOS body effect performance were also analyzed.

This work successfully develops a largely-gradient-pitched polymer-stabilized blue phase (PSBP) photonic bandgap (PBG) device with a wide-band spatial tunability in nearly entire visible region within a wide blue phase (BP) temperature range including room temperature. The device is fabricated based on the reverse diffusion of two injected BP-monomer mixtures with a low and a high chiral concentrations and afterwards through UV-curing. This gradient-pitched PSBP can show a rainbow-like reflection appearance in which the peak wavelength of the PBG can be spatially tuned from the blue to the red regions at room temperature. The total tuning spectral range for the cell is as broad as 165 nm and covers almost the entire visible region. Based on the gradient-pitched PSBP, a spatially tunable laser is also demonstrated in this work. The temperature sensitivity of the lasing wavelength for the laser is negatively linear and approximately −0.26 nm/°C. The two devices have a great potential for use in applications of photonic devices and displays because of their multiple advantages, such as wide-band tunability, wide operated temperature range, high stability and reliability, no issue of hysteresis, no need of external controlling sources and not slow tuning speed (mechanically).

The present study develops and investigates for the first time a unique spatial continuously tunable cone laser based on a dye-doped cholesteric liquid crystal (DDCLC) film with an LC-birefringence (Δn) gradient. A continuous Δn variation can be generated in a cell by diffusion and self-organization of CLC after four DDCLC mixtures with a discrete variation of Δn are successively injected into an empty cell. Not only the CLC photonic structure but also the lasing wavelength and the cone angle of the obtained conically symmetric emitted lasing ring can be tuned continuously by continuously changing the pumped position of the cell with an Δn gradient. The continuous tunabilities in the lasing wavelength and the corresponding emitted cone angle of the lasing ring are 605.8 → 568.1 nm and 29° → 50°, respectively, within a spatial interval of about 33 mm in the cell.

This paper presents an approach to reduce threshold voltage (VT) fluctuation in 40nm low power MOSFET transistor. Introducing nitrogen (N) co-implantation in pocket architecture and reducing pocket implant tilt angle are two factors known for decreasing the VT fluctuation (σVt). In this paper, we combined these two VT fluctuation reduction approaches in source and drain extension (SDE) process and demonstrated that it could not only improve VT mismatch (σVt) ~30%, but also reduce MOSFET overlay capacitance ~ 8%

The formation of surface relief grating on dye-doped polymer film with the interface of nematic liquid crystals has been investigated by means of the holographic technique. The first-order diffraction efficiency of surface relief grating depends on the temperature and the orientation of molecular director in the interface of nematic liquid crystals. The diffraction efficiency is roughly independent of thermal fluctuations of molecular director in the most part of nematic temperature range and apparently drops near the transition temperature. The morphology of surface relief grating demonstrates that the surface modulation is larger for molecular director parallel to the groove direction. The experimental result also shows that the first-order diffraction efficiency is dependent on the surface modulation of surface relief grating.

This work presents an electro- and photo-controllable spatial filter that is based on a liquid crystal (LC) film with a photoconductive layer. The controllable spatial filter can be formed because of the controllability of the photoelectro-induced screen effect of the space charge in the LC cell. An applied dc voltage or incident pumped intensity can be controlled to enable different spatial distributions of the diffraction pattern of the target object to be selected for filtering by the LC cell, such that various reconstructed images can be obtained. A simulation using Fourier analysis is developed, and its results agree closely with experimental results. Additionally, the LC spatial filter has the extra advantage of controllable low or high filtering functions: they are controlled by switching the configuration between normally black and normally white modes.

The photoluminescence of nematic liquid crystals doped with silver nanoparticles has been investigated. The peak intensity of photoluminescence varies with the concentration of doped silver nanoparticles. The peak intensity of photoluminescence shows the enhancement effect in the range of concentration from 0% ∼ 1% and the quenching effect in the range of concentration from 1% ∼ 4%. The photoluminescence can be enhanced around 55% for silver nanoparticles with 88 nm in diameter.

Ultraviolet B (UVB) irradiation is the most common cause of radiation damage to the eyeball and is a risk factor for human corneal damage. We determined the protective effect of fucoxanthin, which is a carotenoid found in common edible seaweed, on ocular tissues against oxidative UVB-induced corneal injury. The experimental rats were intravenously injected with fucoxanthin at doses of 0.5, 5 mg/kg body weight/day or with a vehicle before UVB irradiation. Lissamine green for corneal surface staining showed that UVB irradiation caused serious damage on the corneal surface, including severe epithelial exfoliation and deteriorated epithelial smoothness. Histopathological lesion examination revealed that levels of proinflammatory cytokines, including tumor necrosis factor-α (TNF-α) and vascular endothelial growth factor (VEGF), significantly increased. However, pretreatment with fucoxanthin inhibited UVB radiation-induced corneal disorders including evident preservation of corneal surface smoothness, downregulation of proinflammatory cytokine expression, and decrease of infiltrated polymorphonuclear leukocytes from UVB-induced damage. Moreover, significant preservation of the epithelial integrity and inhibition of stromal swelling were also observed after UVB irradiation in fucoxanthin-treated groups. Pretreatment with fucoxanthin may protect against UVB radiation-induced corneal disorders by inhibiting expression of proinflammatory factors, TNF-α, and VEGF and by blocking polymorphonuclear leukocyte infiltration.

This work investigates the performance evolution of color cone lasing emissions (CCLEs) based on dye-doped cholesteric liquid crystal (DDCLC) cells at different fabrication conditions. Experimental results show that the energy threshold (E(th)) and relative slope efficiency (η(s)) of the lasing signal emitted at each cone angle (0°-35°) in the CCLE decreases and increases, respectively, when the waiting time in a homogenously rubbed aligned DDCLC cell is increased from 0 hr to 216 hr (9 days). This result occurs because defect lines gradually shrink with the anchoring of the surface alignment when the waiting time is increased. Hence, the scattering loss decreases, and the dwelling time of the fluorescence photons in the resonator increases, which in turn enhances the CCLE performance. With the aligned cell given the pretreatment of a rapid annealing processing (RAP), the waiting time for obtaining an optimum CCLE can markedly be reduced sixfold. The surface alignment of the DDCLC cell also plays a necessary role in generating the CCLE. This work provides an insight into the temporal evolution of the performance for the CCLE laser and offers a method (RAP) of significantly speeding up the formation of a CCLE laser with optimum performance.

This study demonstrates for the first time a continuously tunable photonic bandgap (PBG) of wide spectral range based on a blue phase (BP) wedge cell. A continuously shifting PBG of the BP wedge cell occurs due to the thickness gradient of the wedge cell at a fixed temperature. The wedge cell provides a gradient of boundary force on the LCs and thus forms a distribution of BP crystal structure with a gradient lattice. Additionally, a spatially tunable lasing emission based on a dye-doped BP (DDBP) wedge cell is also demonstrated. The tunable band of the PBG and lasing emission is about 130 nm and 70 nm, respectively, which tuning spectral ranges are significantly wider than those of CLC and DDCLC wedge cells, respectively. Such a BP device has a significant potential in applications of tunable photonic devices and displays.

A voltage-controllable multiguide directional coupler is designed with a nematic liquid crystal cell, comprising a grating-like indium-tin-oxide electrode. An incident polarized laser beam can couple into adjacent channels by periodic distribution of the refractive index. This capability is attributed to the reorientation of the periodic liquid crystal caused by the application of a voltage. The coupling variation of the optical power in the transverse direction parallel to the waveguide surface is investigated. This work presents a promising coupling function for potential applications of optical communication devices.

This study demonstrates a tunable Fresnel lens in an azo-dye-doped liquid crystal (ADDLC) film using an interference technique. One Fresnel-patterned green beam using a Sagnac interferometer irradiated the UV-illuminated ADDLC cell, yielding a concentric zone plate distribution with homeotropic and isotropic structures in bright and dark regions of the green interference pattern. The proposed Fresnel lens is polarization independent, focus tunable, and the focusing efficiency of the device can be optically controlled.

This study systematically investigates the morphological appearance of azo-chiral dye-doped cholesteric liquid crystal (DDCLC)/polymer coaxial microfibers obtained through the coaxial electrospinning technique and examines, for the first time, their photocontrollable reflection characteristics. Experimental results show that the quasi-continuous electrospun microfibers can be successfully fabricated at a high polymer concentration of 17.5 wt% and an optimum ratio of 2 for the feeding rates of sheath to core materials at 25 °C and a high humidity of 50% ± 2% in the spinning chamber. Furthermore, the optical controllability of the reflective features for the electrospun fibers is studied in detail by changing the concentration of the azo-chiral dopant in the core material, the UV irradiation intensity, and the core diameter of the fibers. Relevant mechanisms are addressed to explain the optical-control behaviors of the DDCLC coaxial fibers. Considering the results, optically controllable DDCLC coaxial microfibers present potential applications in UV microsensors and wearable smart textiles or swabs.

This paper reports for the first time an electrically and thermally controllable nanoparticle (NP) random laser in a well-aligned dye-doped liquid crystal (DDLC) cell. Experimental results show that the random lasing emission is attributed to the amplification of the fluorescence via the multiple scattering of the randomly distributed NPs in the diffusion rout of the well-aligned DDLC cell. The random laser can be electrically and thermally controlled by varying the applied voltage and cell temperature, respectively. As the applied voltage is increased, the orientational change of the LCs from homogeneous to homeotropic texture decreases the dye absorption and thus the spontaneous fluorescence emission, resulting in the decrease of the random lasing emission. The random lasing intensity decreases with increasing temperature at the nematic phase and dramatically increases after the nematic→isotropic (N→I) phase transition. The result in the former stage is attributed to the decreases in the absorption and thus in the spontaneous fluorescence emission for the laser dyes because of the decrease in the order of the laser dyes with increasing temperature at the nematic phase. The result in the latter stage results from the significant decrease of the loss because of the disappearance for the strong leakage of the scattering fluorescence light through the boundaries of the LCs and the glass substrates after the N→I phase transition. Moreover, the anisotropy of the random lasing is crucially determined by two factors: the anisotropies in the spontaneous emission and the leakage of the scattering fluorescence light.

This work first reports wide-band tunable photonic bandgap (PBG) devices based on nematic-refilling cholesteric liquid crystal polymer template samples. By changing the type of refilling nematic liquid crystal (NLC) and sample cell gap, the PBG features of the template sample can be crucially influenced. A physical model related with the NLC infiltration into the template nanopores based on capillary action is used to qualitatively explain the tunable PBG features of the refilling template samples. In addition, a nearly full white (480 nm − 720 nm) spatially tunable PBG device based on a NLC-refilling template wedge cell is demonstrated.

This paper presents an optically wavelength-tunable and intensity-switchable dye-doped cholesteric liquid crystal (DDCLC) spherical microlaser with an azo-chiral dopant. Experimental results present that two functions of optical control - tunability of lasing wavelength and switchability of lasing intensity - can be obtained for this spherical microlaser at low and high intensity regimes of non-polarized UV irradiation, respectively. If the DDCLC microdroplet is subjected to weak UV irradiation, azo-chiral molecules may transform to the bent cis state at a low concentration rate. The effect can slightly decrease the local order of LCs and thus the helical twisting power of the CLC in the microdroplet. As a result, the CLC pitch may become slightly elongated, which will cause the gradual red-shift of both omnidirectional PBG and lasing emission of the DDCLC spherical microdroplet. In contrast, when the microdroplet is subjected to strong UV irradiation, numerous azo-chiral molecules may simultaneously change to bent cis-isomers to seriously disarrange the helical texture of the CLC, which will quickly deform the PBG and deactivate the lasing emission of the microdroplet. Prolonged irradiation of a blue beam after strong UV irradiation may cause the cis azo-chiral molecules quickly convert back rod-like trans-isomers, which may then regenerate the CLC Bragg onion and PBG structures and reactivate the lasing emission of the microdroplet. Optical control of the DDCLC spherical microlaser is realized on a scale of seconds and minutes when UV irradiation is strong and weak, respectively. The 3D DDCLC spherical microlaser is a highly promising controllable 3D micro-light source or microlaser (e.g., all-optical 3D single photon microlaser) for applications of 3D all-optical integrated photonics, laser displays, and biomedical imaging and therapy, and as a 3D UV microdosagemeter or microsensor.

This investigation elucidates for the first time electrically controllable random lasers below the threshold voltage in dye-doped liquid crystal (DDLC) cells with and without adding an azo-dye. Experimental results show that the lasing intensities and the energy thresholds of the random lasers can be decreased and increased, respectively, by increasing the applied voltage below the Fréedericksz transition threshold. The below-threshold-electric-controllability of the random lasers is attributable to the effective decrease of the spatial fluctuation of the orientational order and thus of the dielectric tensor of LCs by increasing the electric-field-aligned order of LCs below the threshold, thereby increasing the diffusion constant and decreasing the scattering strength of the fluorescence photons in their recurrent multiple scattering. This can result in the decrease in the lasing intensity of the random lasers and the increase in their energy thresholds. Furthermore, the addition of an azo-dye in DDLC cell can induce the range of the working voltage below the threshold for the control of the random laser to reduce.

This study investigates, for the first time, an all-optically controllable random laser based on a dye-doped liquid crystal (DDLC) cell added with a photoisomerizable dye. Experimental results indicate that the lasing intensity of this random laser can be all-optically controlled to decrease and increase sequentially with a two-step exposure of one UV and then one green beam. All-optically reversible controllability of the random lasing emission is attributed to the isothermal nematic(N)--isotropic(I) and I--N phase transitions for LCs due to the UV-beam-induced trans--cis and green-beam-induced cis--trans back isomerizations of the photoisomerizable dye, respectively. The former and the latter can decrease and increase the spatial fluctuations of the order and thus of the dielectric tensor of LCs, respectively, subsequently increasing and decreasing the diffusion constant (or transport mean free path), respectively, and thus decaying and rising the scattering strength for the fluorescence photons in their recurrent multi-scattering process, respectively. The consequent decrease and increase of the lasing intensity for the random laser and thus the rise and descent of its energy threshold are generated, respectively.

This study investigates, for the first time, a photoerasable and photorewritable spatially-tunable laser using a dye-doped cholesteric liquid crystal (DDCLC) with a photoisomerizable chiral dopant (AzoM). UV illumination via a photomask with a transmittance-gradient can create a pitch gradient in the cell such that the lasing wavelength can be spatially tuned over a wide band of 134nm. The pitch gradient is generated by the UV-irradiation-induced gradient of the cis-AzoM concentration and therefore the induced gradient of the cell HTP value, resulting in the spatial tunability of the laser. Furthermore, the laser has advantages of photoerasability and photorewritability. The spatial tunability of the laser can undergo more than 100 cycles of photoerasing and photorewriting processes without decay or damage.

The authors propose an experimental observation of the temperature-dependent coupling effect in a nematic liquid crystal (NLC) multiguide. A grating like electrode is fabricated with indium-tin-oxide in the NLC device. With the application of a voltage of 5.4 V, an optical multiguide structure is formed owing to the periodic orientation of liquid crystal molecules, induced by a grating like distributed electric field. A linearly polarized beam of 532 nm is launched into one certain channel and coupled to adjacent ones. Note that the coupling effect significantly depends on temperature. Additionally, we also observe a clear nonlinear light self-focusing phenomenon at a low light power of 15 µW.

The dynamic behavior of surface relief grating of dye-doped polymer film has been investigated. The dependence of the first-order diffraction efficiency on the concentration of dye doped polymer film is studied. The first-order diffraction efficiency of surface relief grating of dye-doped polymer film can be enhanced through the use of nematic liquid crystals as the interface. The surface modulations of relief gratings measured by the atomic force microscopy were compared for both dye-doped polymer films in contact with or without liquid crystals.