Search

Direct methanol fuel cells (DMFCs) as candidates for dominant energy conversion devices based on the higher energy densities of liquid methanol show unique advantages over hydrogen-based fuel cells, such as cheapness and ease of storage and transportation. However, the fundamental challenges for electrochemical oxidation of methanol are the sluggish electro-oxidation kinetics and recovery of Pt surfaces to lower costs. Here, we report a mixed solvent strategy to prepare a highly active and durable class of electrocatalysts with connected single crystalline nanoparticles (NPs), forming an open architecture. Each single crystalline NP along PtCu nanotubes (NTs) can be considered as a highly active unit with specific facet and assembles along one-dimensional (1D) direction. The Pt1Cu1–AA NTs achieve a factor of 5.5 and 10.3 enhancement in mass activity (2252 mA mg−1) and specific activity (6.09 mA cm−2) for methanol oxidation reaction (MOR) relative to Pt/C catalysts, respectively. Moreover, after long-term stability tests, the activity of the NTs could be recovered via a simple potential cycling process (reactivation process) to the initial value or better. Thus this kind of catalysts would limit the costs to the initial investment and recovery and show potential possibility in real DMFC devices.

Forming alloys with transition metal remarkably decreases the u sage of noble metal and offers benefits for electrocatalysis. Here we introduced a mixed-solvent strategy to synthesize unique PtAuCu ternary nanotubes (NTs) with porous and rough surface, using high quality Cu nanowires (NWs) as the partial sacrificial templates. We found that Au plays a key role in the enhancement of e lectrocatalytic performance for both methanol oxidation reaction (MOR) and formic acid oxidation reaction (FAOR). The mass activities of PtAuCu NTs after acid leaching for MOR and FAOR reach 1698.8 mA mg-1Pt at 0.9 V and 1170 mA mg-1Pt at 0.65 V, respectively. Such ternary NTs show impressive stability due to the irreversibly adsorption of CO* on the Au surface instead of the active Pt surface and the excellent structure stability. The present method could be extended to prepare other new multi-functional electrocatalysts.

A pot experiment was conducted to study the effects of inoculation with arbuscular mycorrhizal (AM) fungi, neighboring plants (Trifolium repens), addition of EDTA and phosphate fertilizer on the performance of Dianthus superbus grown on Pb contaminated soil. The growth and quality of D. superbus were investigated to provide a theoretical basis for the scientific cultivation of Chinese herbal medicine. The results showed that the D. superbus with AM resulted in a significant inhibition of Pb uptake (P＜0.05), increase of root development and root/shoot ratio compared to untreated control plants, and with the highest content of active component. The content of emodin reached 6.5 mg·g通过盆栽试验研究了接种丛枝菌根真菌(AM真菌)、种植共生植物(三叶草)、添加重金属螯合物EDTA和磷肥磷酸钙对铅污染下瞿麦生长和品质的影响,为科学种植中药材提供理论依据.结果表明: 接种AM真菌可以显著抑制铅的吸收(

Improving heteroatomic interactions via alloying or forming heterogeneous catalysts is of importance to the enhancement in terms of electrocatalytic activity and stability. In this work, a simple galvanic replacement reaction was utilized to synthesize low Pt-based quaternary nanotubes (NTs). It is easy to obtain PtPdRuTe NTs with different composition and controlled shape using ultrathin Te nanowires (NWs) as sacrificial templates for its high activity. The NT wall thickness and formed NPs on the surface are closely related with the composition, especially Pd content. The optimized incorporation of Pd atoms into ternary PtRuTe NTs formed a uniform protecting PtPd surface and modified the Pt electronic structure to improve the methanol oxidation reaction (MOR) performance. X-ray photoelectron spectroscopy (XPS) reveals a larger extent of electron transfer from neighboring atoms to Pt on PtPdRuTe, consequently leading to a weaker bonding of the intermediate on Pt. As a result, the quaternary PtPdRuTe NTs exhibit enhanced activity and stability toward efficient MOR.

This paper focuses on the perforation-caused leakage diffusion of the underground gas pipeline. Common situations, such as normal leakage model, perforation leakage model and pipe model, are analyzed by theoretical method, and so does the leakage model of natural gas in atmosphere, such as Gauss model. Subsequently, the actual perforation leakage diffusion problem is simplified into an ideal model based on the characteristics of buried gas pipeline. CFD software FLUENT is adopted to perform a transient simulation of this problem, by which the changing trend of the diffusion concentration and velocity of methane with time is obtained and the influence from perforation diameter is further investigated. The results obtained in this paper provide some scientific basis to the safety management and accident rapid rescue of underground gas pipeline.

In this paper, a wall-soil-snow coupling model was established and the mechanism to heat melting system was analyzed. The temperature field and the phase interface moving rule in the process of melting snow were obtained.The selection of system parameters (ambient conditions, diameter, buried depth, pipeline pitch) were studied as well. These results have important reference value for design and optimization of heat source snow-melting system.

This article reports a novel scalable method to prepare ultrathin and uniform Pd@Pt nanowires (NWs) with controllable composition and shell thickness, high aspect ratio, and smooth surface, triggered by bromide ions via a galvanic replacement reaction between PtCl6(2-) and Pd NWs. It was found that bromide ions played a vital role in initiating and promoting the galvanic reaction. The bromide ions served as capping and oxidized etching agents, counterbalancing the Pt deposition and Pd etching on the surface to give final Pd@Pt core-shell nanostructures. Such a counterbalance and the formation PtBr6(2-) with lower redox potential could lower the reaction rate and be responsible for full coverage of a smooth Pt shell. The full coverage of Pt deposited on Pd NWs is important for the enhancement of the activity and stability, which depend strongly on the Pt content and Pt shell thickness. Significantly, the Pd@Pt NWs with Pt content of 21.2% (atomic ratio) exhibited the highest mass activity (810 mA mg(-1)(Pt)) and specific activity (0.4 mA cm(-2)). Interestingly, the mass activity (1560 mA mg(-1)(Pt)) and specific activity (0.98 mA cm(-2)) of Pd@Pt (21.2%) NWs increased to 2.45 and 1.95 times the initial values after 60k cycles tests, 8.5 and 9.0 times greater than those of Pt/C catalysts. In addition, these ultrathin NW electrocatalysts with large aspect ratio are easy to form into a freestanding film, which improves the mass transport, electrical conductivity, and structure stability.