Search

Innovative non-antibiotic compounds such as graphene oxide (GO) and light-emitting diodes (LEDs) may represent a valid strategy for managing chronic wound infections related to resistant pathogens. This study aimed to evaluate 630 nm LED and 880 nm LED ability to enhance the GO antimicrobial activity against Staphylococcus aureus- and Pseudomonas aeruginosa-resistant strains in a dual-species biofilm in the Lubbock chronic wound biofilm (LCWB) model. The effect of a 630 nm LED, alone or plus 5-aminolevulinic acid (ALAD)-mediated photodynamic therapy (PDT) (ALAD-PDT), or an 880 nm LED on the GO (50 mg/l) action was evaluated by determining the CFU/mg reductions, live/dead analysis, scanning electron microscope observation, and reactive oxygen species assay. Among the LCWBs, the best effect was obtained with GO irradiated with ALAD-PDT, with percentages of CFU/mg reduction up to 78.96% ± 0.21 and 95.17% ± 2.56 for S. aureus and P. aeruginosa, respectively. The microscope images showed a reduction in the cell number and viability when treated with GO + ALAD-PDT. In addition, increased ROS production was detected. No differences were recorded when GO was irradiated with an 880 nm LED versus GO alone. The obtained results suggest that treatment with GO irradiated with ALAD-PDT represents a valid, sustainable strategy to counteract the polymicrobial colonization of chronic wounds.

Chronic wound management becomes a complex procedure because of the persistence of forming biofilm pathogens that do not respond to antimicrobial treatment. The aim of this paper is to detect the Graphene Oxide-GO effect on Staphylococcus aureus and Pseudomonas aeruginosa dual species wound biofilm in Lubbock Chronic Wound Biofilm-LCWB model. LCWB is a recognized model that mimics the spatial microbial colonization into chronic wounds and reproduces the wound and its clot. Staphylococcus aureus PECHA 10 and P. aeruginosa PECHA 4, are the pathogens used in the study. The GO effect on both in forming and mature biofilms, is detected by the evaluation of the CFU/mg reduction, the cell viability and ultrastructural analysis of the treated LCWBs. Graphene Oxide, at 50 mg/l, shows a significant antibiofilm effect in forming and mature LCWBs. In particular, during the biofilm formation, GO reduces the S. aureus and P. aeruginosa growth of 55.05% ± 4.73 and 44.18% ± 3.91 compared to the control. In mature biofilm, GO affects S. aureus and P. aeruginosa by reducing their growth of 70.24% ± 4.47 and 63.68% ± 17.56, respectively. Images taken by SEM show that GO display a disaggregated microbial effect also disrupting the fibrin network of the wound-like biofilm framework. In conclusion, GO used against microorganisms grown in LCWB, displays a significant inhibitory action resulting in a promising tool for potential application in wound management.

Antibacterial and antibiofilm properties of restorative dental materials may improve restorative treatment outcomes. The aim of this in vitro study was to evaluate

The aim was to evaluate the effects of two LED devices, TL-01 and TL-03 in photodynamic therapy (PDT), onBoth TL-01 and TL-03 showed a significant reduction of bacterial load. The photoinactivation was inversely proportional to the PpIX accumulation. TL-01 and TL-03 promoted proliferation and adhesion of HGFs.Both tested devices for ALAD-PDT were equally effective in significantly reducing

Helicobacter pylori colonizes human gastric mucosa, overcoming stressful conditions and entering in a dormant state. This study evaluated: (i) H. pylori’s physiological changes from active to viable-but-non-culturable (VBNC) and persister (AP) states, establishing times/conditions; (ii) the ability of vitamin C to interfere with dormancy generation/resuscitation. A dormant state was induced in clinical MDR H. pylori 10A/13 by: nutrient starvation (for VBNC generation), incubating in an unenriched medium (Brucella broth) or saline solution (SS), and (for AP generation) treatment with 10xMIC amoxicillin (AMX). The samples were monitored after 24, 48, and 72 h, 8–14 days by OD600, CFUs/mL, Live/Dead staining, and an MTT viability test. Afterwards, vitamin C was added to the H. pylori suspension before/after the generation of dormant states, and monitoring took place at 24, 48, and 72 h. The VBNC state was generated after 8 days in SS, and the AP state in AMX for 48 h. Vitamin C reduced its entry into a VBNC state. In AP cells, Vitamin C delayed entry, decreasing viable coccal cells and increasing bacillary/U-shaped bacteria. Vitamin C increased resuscitation (60%) in the VBNC state and reduced the aggregates of the AP state. Vitamin C reduced the incidence of dormant states, promoting the resuscitation rate. Pretreatment with Vitamin C could favor the selection of microbial vegetative forms that are more susceptible to H. pylori therapeutical schemes.

Resistant wound microorganisms are becoming an extremely serious challenge in the process of treating infected chronic wounds, leading to impaired healing. Thus, additional approaches should be taken into consideration to improve the healing process. The use of natural extracts can represent a valid alternative to treat/control the microbial infections in wounds. This study investigates the antimicrobial/antivirulence effects of

(1) Background: The objectives of this study were to evaluate the effect of several sessions of the antibacterial protocol of complex electromagnetic fields (CMFs) on planktonic Candida albicans and fungal ability, after treatment with CMFs, to adhere and proliferate on acrylic resin materials. (2) Methods: Planktonic overnight cultures of Candida albicans were subjected to different entities of CMFs treatments. Four test groups were compared: “p1”: treated only with the first program of the antibacterial protocol, “p1–p5” subjected to the first five programs, “1 antibacterial” received one complete session of the protocol and “2 antibacterial” received two complete sessions. After the treatments, the number of colony forming units (CFUs) were recorded. Then, C. albicans broth cultures were cultivated on polyacrylic resin discs and evaluated for CFUs and subjected to scanning electron microscope (SEM) analysis. (3) Results: Microbiological analysis showed that CMFs promoted a significant reduction of C. albicans CFUs when the protocol “p1–p5” was applied. No statistically significant differences between test groups were observed if the time of exposure to CMFs was increased. SEM observations and CFUs showed that CMFs treatments have the ability to reduce C. albicans adherence and proliferation on discs. (4) Conclusions: The CMFs showed an antifungal effect as well as a decrease in C. albicans adhesion on polyacrylic resin.

This work aimed to compare the capability of Streptococcus oralis to adhere to a novel surface, double-etched titanium (DAE), in respect to machined and single-etched titanium. The secondary outcome was to establish which topographical features could affect the interaction between the implant surface and bacteria. The samples&rsquo, superficial features were characterized using scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS), and the wetting properties were tested through sessile methods. The novel surface, the double-etched titanium (DAE), was also analyzed with atomic force microscopy (AFM). S. oralis was inoculated on discs previously incubated in saliva, and then the colony-forming units (CFUs), biomass, and cellular viability were measured at 24 and 48h. SEM observation showed that DAE was characterized by higher porosity and Oxygen (%) in the superficial layer and the measurement of the wetting properties showed higher hydrophilicity. AFM confirmed the presence of a higher superficial nano-roughness. Microbiological analysis showed that DAE discs, coated by pellicle&rsquo, s proteins, were characterized by significantly lower CFUs at 24 and 48 h with respect to the other two groups. In particular, a significant inverse relationship was shown between the CFUs at 48 h and the values of the wetted area and a direct correlation with the water contact angle. The biomass at 24 h was slightly lower on DAE, but results were not significant concerning the other groups, both at 24 and 48 h. The DAE treatment not only modifies the superficial topography and increased hydrophilicity, but it also increases the Oxygen percentage in the superficial layer, which could contribute to the inhibition of S. oralis adhesion. DAE can be considered a promising treatment for titanium implants to counteract a colonization pioneer microorganism, such as S. oralis.

Background: An unbalanced skin microbiota due to an increase in pathogenic vs. commensal bacteria can be efficiently tackled by using prebiotics. The aim of this work was to identify novel prebiotic combinations by exerting species-specific action between S. aureus and S. epidermidis strains. Methods: First, the antimicrobial/antibiofilm effect of Xylitol-XYL and Galacto-OligoSaccharides&ndash, GOS combined with each other at different concentrations (1, 2.5, 5%) against S. aureus and S. epidermidis clinical strains was evaluated in time. Second, the most species-specific concentration was used to combine XYL with Fructo-OligoSaccharides&ndash, FOS, IsoMalto-Oligosaccharides&ndash, IMO, ArabinoGaLactan&ndash, LAG, inulin, dextran. Experiments were performed by OD600 detection, biomass quantification and LIVE/DEAD staining. Results: 1% XYL + 1% GOS showed the best species-specific action with an immediate antibacterial/antibiofilm action against S. aureus strains (up to 34.54% &plusmn, 5.35/64.68% &plusmn, 4.77) without a relevant effect on S. epidermidis. Among the other prebiotic formulations, 1% XYL plus 1% FOS (up to 49.17% &plusmn, 21.46/37.59% &plusmn, 6.34) or 1% IMO (up to 41.28% &plusmn, 4.88/36.70% &plusmn, 10.03) or 1% LAG (up to 38.21% &plusmn, 5.31/83.06% &plusmn, 5.11) showed antimicrobial/antibiofilm effects similar to 1% XYL+1% GOS. For all tested formulations, a prevalent bacteriostatic effect in the planktonic phase and a general reduction of S. aureus biofilm formation without loss of viability were recorded. Conclusion: The combinations of 1% XYL with 1% GOS or 1% FOS or 1% IMO or 1% LAG may help to control the balance of skin microbiota, representing good candidates for topic formulations.

The aim of this study was to evaluate the interaction between Streptococcus oralis and Polyetheretherketone (PEEK), a novel material recently introduced in implantology. The topographical characterization and the Streptococcus oralis adhesion on this material were compared with other titanium surfaces, currently used for the production of dental implants: machined and double etched (DAE). The superficial micro-roughness of the PEEK discs was analyzed by scanning electron microscopy (SEM) and, the Energy Dispersive Spectrometer (EDS) analyzed their chemical composition. Atomic Force Microscopy (AFM) was used to characterize the micro-topography and the sessile method to evaluate the wettability of the samples. Microbiological analysis measured the colony forming units (CFUs), the biomass (OD570 detection) and the cell viability after 24 and 48 h after Streptococcus oralis cultivation on the different discs, that were previously incubated with saliva. Results showed that PEEK was characterized by a micro-roughness that was similar to machined titanium but at nano-level the nano-roughness was significantly higher in respect to the other samples. The EDS showed that PEEK superficial composition was characterized mainly by Carbonium and Oxygen. The hydrophilicity and wetting properties of PEEK were similar to machined titanium; on the contrary, double etched discs (DAE) samples were characterized by significantly higher levels (p S. oralis, could have an important role in the prevention of all pathologies connected with biofilm formation, like peri-implantitis in dentistry or prosthetic failures in orthopedics.

Bacteria belonging to Staphylococcus genus, in particular methicillin-resistant Staphylococcus aureus and multidrug-resistant Staphylococcus epidermidis, together with Cutibacterium acnes are the main strains involved in skin disease. The increase in multidrug-resistant bacteria has revived attention on natural compounds as alternative agents for the treatment management. Among these, hop extract, a hydroalcoholic solution obtained from experimental crops of Humulus lupulus L. variety cascade (hop), displays diverse biological properties including an antimicrobial one. The aim of this study was to evaluate the antimicrobial activity and the capacity to inhibit the biofilm formation of a characterized hop extract against S. aureus and S. epidermidis multidrug-resistant strains and against a C. acnes strain. The hop extract was characterized by (i) phytochemical analysis through a reversed-phase high-performance liquid chromatography (HPLC)–fluorimetric method, (ii) biocompatibility test with Artemia salina L., (iii) cytotoxicity against two cell lines, (iv) docking analysis, and (v) antimicrobial and antibiofilm activities by detection of zones inhibition, minimal inhibitory concentrations (MICs), biomass quantification, and cell viability. The hop extract was biocompatible and non-cytotoxic at all tested concentrations. HPLC analysis revealed significant levels of gallic acid, resveratrol, and rutin. This last compound was the most representative displaying a high affinity against PBP2a and KAS III (Ki values in the submicromolar range). The characterized hop extract showed a good antimicrobial action with MICs ranging from 1 to 16 μg/mL and was able to inhibit the biofilm formation of all tested strains, except for two S. aureus strains. The biofilm formed in presence of the hop extract was significantly reduced in most cases, even when present at a concentration of 1/4 MIC. The live/dead images showed a remarkable inhibition in the biofilm formation by hop extract with a weak killing action. Overall, the tested hop extract is a good candidate to further explore for its use in the prevention of infection particularly, by multidrug-resistant Gram-positive pathogens.

Microbial contamination could compromise the stability of dental implants increasing the risk of inflammatory reactions in the surrounding soft tissues. In this human, randomized, double-blind, clinical study, the presence of Porphyromonas gingivalis on the healing abutment and the inflammatory infiltrate surrounding peri-implant soft tissues were investigated. Experiments were done in order to clarify the effect of 0.20% chlorhexidine (CHX) versus placebo, applied during each rehabilitation stage. Thirty patients (15 per group) were included. The load of adhering P. gingivalis on the healing screw were quantified by quantitative Polymerase Chain Reaction (qPCR) Taq-Man. Immunohistochemical analysis was carried out on the gingival biopsy. Moreover, clinical data were recorded. Analysis of variance and the Holm&ndash, Sidak test was used to evaluate differences between groups. The results showed a significant low presence of P. gingivalis load in healing abutments belonging to the 0.20% CHX group. Overall, the differences in terms of P. gingivalis DNA copy number between two groups were statistically significant (p &lt, 0.01). All implants showed very low plaque and bleeding scores, but the placebo group appeared to have the highest expression of inflammation markers for T Lymphocytes, B Lymphocytes and macrophages Cluster definitions (CD3, CD20 and CD68). The use of 0.20% CHX could be recommended in all clinical procedures as it reduces significantly P. gingivalis load and host inflammatory response around implants.

Curcumin, a phenolic compound extracted from Curcuma longa, exerts multiple pharmacological effects, including an antimicrobial action. Mycobacterium abscessus, an environmental, nontuberculous, rapidly growing mycobacterium, is an emerging human pathogen causing serious lung infections and one of the most difficult to treat, due to its multidrug resistance and biofilm-forming ability. We wanted to evaluate the antimicrobial and antivirulence activity of curcumin and its ability to synergize with antibiotics against a clinical M. abscessus strain (29904), isolated from the bronchoaspirate of a 66-year-old woman admitted to hospital for suspected tuberculosis. Curcumin [minimum inhibitory concentrations (MIC) = 128 mg/L] was synergic (fractional inhibitory concentration index ≤0.5) with amikacin, clarithromycin, ciprofloxacin, and linezolid, to which strain 29904 showed resistance/intermediate susceptibility. Curcumin at 1/8 × MIC significantly reduced motility, whereas at 4 × MIC, it completely inhibited 4- and 8-day mature biofilms. Synergistic combinations of curcumin and amikacin induced a general reduction in microbial aggregates and substantial loss in cell viability. Disruption of 4- and 8-day biofilms was the main effect detected when curcumin was the predominant compound. The present findings support previous evidence that curcumin is a potential antibiotic resistance breaker. Curcumin, either alone or combined with antibiotics, could provide a novel strategy to combat antibiotic resistance and virulence of M. abscessus.

Rapidly growing mycobacteria (RGM) are environmental bacteria found worldwide with a propensity to produce skin and soft-tissue infections. Among them, the most clinically relevant species is Mycobacterium abscessus. Multiple resistance to antibiotics and the ability to form biofilm contributes considerably to the treatment failure. The search of novel anti-mycobacterial agents for the control of biofilm growth mode is crucial. The aim of the present study was to evaluate the activity of carvacrol (CAR) against planktonic and biofilm cells of resistant RGM strains. The susceptibility of RGM strains (n = 11) to antibiotics and CAR was assessed by MIC/MBC evaluation. The CAR activity was estimated by also vapour contact assay. The effect on biofilm formation and preformed biofilm was measured by evaluation of bacterial growth, biofilm biomass and biofilm metabolic activity. MIC values were equal to 64 μg/mL for most of RGM isolates (32-512 μg/mL), MBCs were 2-4 times higher than MICs, and MICs of vapours were lower (16 μg/mL for most RGM isolates) than MICs in liquid phase. Regarding the biofilm, CAR at concentrations of 1/2 × MIC and 1/4 × MIC showed a strong inhibition of biofilm formation (61-77%) and at concentration above the MIC (2-8 × MIC) produced significant inhibition of 4- and 8-day preformed biofilms. In conclusion, CAR could have a potential use, also in vapour phase, for the control of RGM.

The increasing multidrug resistance in Helicobacter pylori, also correlated to its biofilm‐forming ability, underlines the need to search novel strategies to improve the eradication rate. Natural compounds are proposed as antibiotic-resistant-breakers capable to restore the efficacy of conventional drugs. Aim of this work was to evaluate the capability of Pistacia vera L. oleoresin (ORS) to synergize with levofloxacin (LVX) against resistant H. pylori strains. The antimicrobial activity of P. vera L. ORS and LVX and their combinations was determined by MIC/MBC (in neutral and acidic environments) and checkerboard tests. The anti-biofilm effect was determined by biomass quantification. In vivo Galleria mellonella model was used to confirm in vitro data. Pistacia vera L. ORS and LVX MICs ranged respectively from 780 to 3120 mg/l and from 0.12 to 2.00 mg/l, at pH 7.0 and 5.5. MBCs were similar to MICs. Pistacia vera L. ORS was able to synergize with LVX, restoring its effectiveness in LVX resistant strains. Pistacia vera L. ORS, LVX and their synergistic combinations displayed significant biofilm reduction. Pistacia vera L. ORS and LVX, showed protective effect against H. pylori infection on G. mellonella (62% and 63% of survival, respectively). Pistacia vera L. ORS can be considered a promising potentiator to restore the effectiveness of LVX tackling the H. pylori antibiotic resistance phenomenon.

The drug-resistance phenomenon in Helicobacter pylori underlines the need of novel strategies to improve the eradication rate including alternative treatments combining antibiotic and non-antibiotic compounds with synergistic action. In this study, the antibacterial (MIC/MBC) and anti-virulence effects (biofilm reduction and swarming motility inhibition) of resveratrol-RSV and new synthetized RSV-phenol derivatives, with a higher bioavailability, alone and combined with levofloxacin-LVX were evaluated against resistant H. pylori clinical strains. The experiments were confirmed in vivo using the Galleria mellonella model. Among the studied RSV derivatives, RSV-3 and RSV-4 possessed higher antibacterial activity with respect to RSV (MICs from 6.25 to 200 &micro, g/mL and from 3.12 to 200 &micro, g/mL, respectively). RSV, RSV-3, and RSV-4 were able to synergize with LVX restoring its effect in two out of seven clinical resistant strains tested for the study. RSV, RSV-3, and RSV-4, alone and with LVX at sub-MIC and sub-synergistic concentrations, significantly reduced the biofilm formation. Moreover, RSV-3 and RSV-4 reduced the H. pylori swarming motility on soft agar. RSV, RSV-3, and RSV-4 were non-toxic for G. mellonella larvae and displayed a protective effect against H. pylori infection. Overall, RSV&ndash, phenol derivatives should be considered interesting candidates for innovative therapeutic schemes to tackle the H. pylori antibiotic resistance.

New strategies are necessary for the prevention of endodontic infections caused by Enterococcus faecalis, a common resistant pathogen and biofilm producer. Aim of the present study was to compare the effects of Near-Infrared (NIR) Light-Emitting Diode (LED) irradiation and different concentrations of sodium hypochlorite (NaOCl) alone or combined to each other on the E. faecalis biofilm, on artificial and human dentin surfaces. E. faecalis ATCC 29212 preformed biofilms, on polystyrene wells and on dentin discs, were treated with 880 nm NIR irradiation and NaOCl at 4%, 2.5%, 1% and 0.5% alone and combined to each other (NIR irradiation plus NaOCl 1% or 0.5%) at 5 and 10 min. Treated biofilms were compared to the controls for (i) biofilm biomass evaluation, (ii) CFU count for the quantification of cultivable cells and (iii) cells viability. All the detected experimental conditions displayed a significant reduction of biofilm biomass (p 0.001) and CFUs/mL (p 0.01) in respect to the controls on both tested surfaces. The effects on the E. faecalis biomass, colony count and cell viability were not time-dependent except for NaOCl 2.5% and 1% in the biofilm biomass reductions on human dentin discs. NIR-LED irradiation alone showed a reduction of E. faecalis aggregates without interfering with cell viability whereas NaOCl alone expressed a killing effect in a concentration dependent way. The combination of NIR-LED irradiation with NaOCl 1% and 0.5% displayed a double effect of cluster disaggregation and cell killing. In particular, NIR-LED irradiation combined with NaOCl 0.5% displayed an anti-biofilm activity major than those expressed by NaOCl 0.5% alone (p = 0.001) with a reduction of biomass 93% vs 71% and 97% vs 25% after 10 min, on polystyrene wells and human dentin discs, respectively. The innovative use of NIR-LED irradiation combined at short times with low concentration of NaOCl (1% and 0.5%) is capable to reach a significant effect on E. faecalis biofilm, especially on human dentin discs.

Chronic wounds represent an increasing problem worldwide. Graphene oxide (GO) has been reported to exhibit strong antibacterial activity toward both Gram-positive and Gram-negative bacteria. The aim of this work was to investigate the in vitro antimicrobial and antibiofilm efficacy of GO against wound pathogens. Staphylococcus aureus PECHA 10, Pseudomonas aeruginosa PECHA 4, and Candida albicans X3 clinical isolates were incubated with 50 mg/liter of GO for 2 and 24 h to evaluate the antimicrobial effect. Optical and atomic force microscopy images were performed to visualize the effect of GO on microbial cells. Moreover, the antibiofilm effect of GO was tested on biofilms, both in formation and mature. Compared to the respective time controls, GO significantly reduced the S. aureus growth both at 2 and 24 h in a time-dependent way, and it displayed a bacteriostatic effect in respect to the GO t = 0; an immediate (after 2 h) slowdown of bacterial growth was detected for P. aeruginosa , whereas a tardive effect (after 24 h) was recorded for C. albicans . Atomic force microscopy images showed the complete wrapping of S. aureus and C. albicans with GO sheets, which explains its antimicrobial activity. Moreover, significant inhibition of biofilm formation and a reduction of mature biofilm were recorded for each detected microorganism. The antibacterial and antibiofilm properties of GO against chronic wound microorganisms make it an interesting candidate to incorporate into wound bandages to treat and/or prevent microbial infections.

Objective The aim of this study was to characterize the chemical composition of oleoresin of Pistacia vera L. and to determine its antimicrobial and anti-virulence activity versus selected oral streptococci. Design A gaschromatografic analysis of the oleoresin was performed. The antimicrobial and anti-virulence activity of the oleoresin and its fractions was evaluated by the Minimum Inhibitory Concentration (MIC) and/or Minimum Bactericidal Concentration (MBC), biofilm production and haemolytic activity inhibition experiments. Results The oleoresin MBCs were ≥1024 μg/mL for all tested strains; the neutral and acidic fraction MBCs ranged from 128 to 2048 μg/mL. Essential oil’s MBCs (from 256 to 2048 μg/mL) were almost identical to MICs, suggesting a bactericidal effect. P. vera oleoresin at sub-lethal concentrations significantly reduced biofilm production by Streptococcus mutans (up to 49.4%) and by Streptococcus sanguinis (up to 71.2%). In addition, the acidic fraction showed a specific anti-biofilm activity against S. mutans (up to 41.3% reduction). A significant dose-dependent reduction in the haemolytic activity of S. mutans (up to 65.9%) and of S. anginosus (up to 78.3%) was observed after growth in the presence of oleoresin at sub-lethal concentrations. The acidic fraction reduced haemolytic activity (up to 54.3% at 64 μg/mL) of S. mutans only. Conclusions Given the anti-virulence activity of the P. vera oleoresin and its acidic fraction against S. mutans, our findings suggest their potential use in oral hygiene. These data represent the first step in the exploitation of P. vera L. oleoresin.

Background Nowadays, the bacterial contamination in the hospital environment is of particular concern because the hospital-acquired infections (HAIs), also known as nosocomial infections, are responsible for significant morbidity and mortality. This work evaluated the capability of Enterococcus hirae to form biofilm on different surfaces and the action of two biocides on the produced biofilms. Methods The biofilm formation of E. hirae ATCC 10541 was studied on polystyrene and stainless steel surfaces through the biomass quantification and the cell viability at 20 and 37 °C. The effect of LH IDROXI FAST and LH ENZYCLEAN SPRAY biocides on biomasses was expressed as percentage of biofilm reduction. E. hirae at 20 and 37 °C produced more biofilm on the stainless steel in respect to the polystyrene surface. The amount of viable cells was greater at 20 °C than with 37 °C on the two analyzed surfaces. Biocides revealed a good anti-biofilm activity with the most effect for LH ENZYCLEAN SPRAY on polystyrene and stainless steel at 37 °C with a maximum biofilm reduction of 85.72 and 86.37%, respectively. Results E. hirae is a moderate biofilm producer depending on surface material and temperature, and the analyzed biocides express a remarkable antibiofilm action. Conclusion The capability of E. hirae to form biofilm can be associated with its increasing incidence in hospital-acquired infections, and the adoption of suitable disinfectants is strongly recommended. Electronic supplementary material The online version of this article (doi:10.1186/s12199-017-0670-3) contains supplementary material, which is available to authorized users.

In this study, the microbial contamination of smartphones from Italian University students was analyzed. A total of 100 smartphones classified as low, medium, and high emission were examined. Bacteria were isolated on elective and selective media and identified by biochemical tests. The mean values of cfu/cm2 were 0.79 ± 0.01; in particular, a mean of 1.21 ± 0.12, 0.77 ± 0.1 and 0.40 ± 0.10 cfu/cm2 was present on smartphones at low, medium, and high emission, respectively. The vast majority of identified microorganisms came from human skin, mainly Staphylococci, together with Gram-negative and positive bacilli and yeasts. Moreover, the main isolated species and their mixture were exposed for 3 h to turned on and off smartphones to evaluate the effect of the electromagnetic wave emission on the bacterial cultivability, viability, morphology, and genotypic profile in respect to the unexposed broth cultures. A reduction rate of bacterial growth of 79 and 46% was observed in Staphylococcus aureus and Staphylococcus epidermidis broth cultures, respectively, in the presence of turned on smartphone. No differences in viability were observed in all detected conditions. Small colony variants and some differences in DNA fingerprinting were detected on bacteria when the smartphones were turned on in respect to the other conditions. The colonization of smartphones was limited to human skin microorganisms that can acquire phenotype and genotypic modifications when exposed to microwave emissions.