Search

This study was conducted to evaluate the COD removal efficiency of Photo-Fenton oxidation process. The reagents used in the Photo-Fenton process are catalyst Fe2+ and H2O2 as oxidizing agent. A 16W UV lamp was used to carry out the experiments. All the experiments were performed in batch mode to investigate the influence of operating conditions viz., Fenton reagents dosage, molar ratio and reaction time. The maximum COD removal observed was 68% under optimum operating conditions. The operating conditions H2O2/Fe2+ molar ratio = 3 and reaction time = 90 minutes were found to optimum. The dosages of Fenton reagents i.e. hydrogen peroxide and Fe2+ were optimum at 0.09 mol/L and 0.03 mol/L respectively.

The efficiency of Fenton’s oxidation was assessed in this study for hazardous waste landfill leachate treatment. The two major reagents, which are generally employed in Fenton’s process are H2O2 as oxidizing agent and Fe2+ as catalyst. Batch experiments were conducted to determine the effect of experimental conditions viz., reaction time, molar ratio, and Fenton reagent dosages, which are significant parameters that influence the degradation efficiencies of Fenton process were examined. It was found that under the favorable experimental conditions, maximum COD removal was 56.49%. The optimum experimental conditions were pH=3, H2O2/Fe2+ molar ratio = 3 and reaction time = 150 minutes. The optimal amount of hydrogen peroxide and iron were 0.12 mol/L and 0.04 mol/L respectively. High dosages of H2O2 and iron resulted in scavenging effects on OH• radicals and lowered degradation efficiency of organic compounds in the hazardous waste landfill leachate.